|
| 1 | Fly ash brick masonry in C.M. (1:4) in foundation and plinth using 25cm x 12cm x 8cm brick having crushing strength not less than 75 Kg / cm2 |
| 2 | 12mm thick C.P. in C.M.(1:4) over brick masonary to the smooth surface including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 3 | Finishing walls with water proffing cement paint two coats with cost of cement paint |
| 4 | Painting two coats with any approved paint including the cost of enamel paint for wood work & Iron work. |
| 5 | Supplying all materials, labour, T&P for providing Mild Steel tubular posts and Trusses and base platesmade out of ERW tubes, Grade YST 210 conforming to ISS no.1161/79 (3rd Revision) duly painted with red oxide primer etc. complete. |
| 6 | Supplying fitting & fixing of Precoated Galvanized iron Profile sheet semi gloss of 1000mm width & total coated thickness 0.50mm in roof drilling hole in wind ties including fixing of ridges valleys, wind ties etc. complete including cost ofsheet& allfitting (per 1 Sq. Mtr.) |
| 7 | Providing, Supplying, & fixing of MS folding Shuttter (4 Ply) with 50x50x5mm angle frame with inner frame size of 35x35x5mm angle with G.I. Sheet supprting with MS flat 25x5mm with fitting such as 4\" hinges, AI drop, Claps, Hooks along with locking system. |
| 8 | Supplying all materials, labour, T&P conveyances, fitting and fixing the following nominal bore G.I. / P.V.C.Pipe to walls / ceiling / floor with required G.I. Fittings including cutting the pipes and threading, making good the damage all complete as per direction of Engineer-in-charge15mm dia PVCASTM Sch-80pipe |
| 9 | 25mm dia MTA |
| 10 | 25mm dia FTA |
| 11 | 15mm dia UPVC-ASTM Ball Valve with metal ball |
| 12 | 15mm dia CPVC Pipes |
| 13 | Supplying all materials, labour, T&P and fixing of following P.H. fittings of approved make including supplying of all necessary jointing materials all complete as per approved specification and direction of Engineer-in-charge.23\" size Orissa pan with P\" trap (Parryware) |
| 14 | 15mm dia. C.P. short body bib cock.(Amber Delux) |
| 15 | 15mm dia C.P. extension piece and flange |
| 16 | 125mm dia CP grating |
| 17 | Supply all materials, labour, T&P and laying of following dia. SWRpipes and fittings, jointing with C.M. (1:1) fixing to walls with nails, bobbins and wooden plugs etc. all complete as per direction of Engineer-in-charge.110mm dia P.V.C. SWR S/S Pipe(ISI type-B) |
| 18 | 110mm dia PVC SWR door bend |
| 19 | 110mm dia. PVC SWR Plain Bend |
| 20 | 110mm dia. PVC SWR Pipe clip |
| 21 | 110mm dia. PVC SWR P\" trap |
| 22 | Supplying fitting fixing solid PVC flush door 25 mm thick leafed with PVC baton of size 25 X11 mm on all four sides and core of the Flush door filled with high density polyrethane foam (PUF) and highes side of the door reinfoced with 190X19 mm MS tube and special polymenic reinforcement to take up necessary hardware and fixtures including PVC door frame of Code DWUF 405 and hinges side of the door frame reinfored withsoild PVC bar (Sintex /Rajashree make). |
