Military Engineer Services-MES has published Tender For Repairs To Flooring And Joinery Works And Certain Other B&R Works In Jadunath Enclave Under Age B&R-I Under Ge ( South ) Bathinda At Bathinda Military Station. Submission Date for this Tender is 13-09-2023. Civil Work Tenders in bathinda Punjab. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Comprehensive maintenance for Carpentary work by attending day to day complaints of joinery related such as replacement of Builders hardware of doors, windows & cupboard and other Carpentary nature works like easening of door, windows and cupboards. Tightening of screws for tower bolt/Aldrop bolt/ stoppers ,handle hinges in respect to Easening of door / windows/cupboards (SteelWooden/Aluminium) of any description and size by cleaning, adjusting in position and making the same functional incl small repairs if reqd with and incl greasing, oiling, screws/nales for fixing the fittings. |
| 2 | Comprehensive maintenance to masonary work by attending day to day complaints of masonary related works such as plastering of wall/ceiling/chajja/making of jambs,soffit,cills etc of size not exceeding 0.25 sqm or on patch work including finishing with distemper/white wash/cement based paint/exterior emulsion paint including two coats of putty as required at site to match with existing surface. |
| 3 | Note for item No 01 to 03. The scope of work is of day to day maintenance nature/ requirement of works. Contractor shall attend the office of AGE B/R-I on daily basis and receive/ collect the complaints/ requirememts of works and shall rectify the repair/maintenance works within time given below :- (a)Minor plumbing complaints - 48 hours(b)Minor Joinery complaints - 48 hours(c)Minor masonary complaints - 48 hours (d)Major Plumbing - 5 days (e)Major Joinery - 15 Days.If contractor fails to rectify the complaints with materials/ items to be replaced if required a penalty @ 50% of quoted rate by the contractors of that particular item shall be recovered from his payment. The responsibility of getting the complaints attended & rectified shall lies with the contractor even if he fails to complete the complaints within 48 hours. In the delayed case of a rectification of complaints even after 48 hours, he shall rectify the same within one week. (Note :- The complaint received from complaint cell shall have to be attended on same day). |
| 4 | Taking down chowkats or frame with shutter (without taking off shutters from the frames) n. exc 1.50 sqm each all as specified |
| 5 | Taking down chowkats or frame with shutter (without taking off shutters from the frames) exc 1.50 sqm but n. exc 4.00 Sqm each all as specified |
| 6 | Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and removed from site all as specified |
| 7 | Taking down shutters of any description not exceeding 1.00 sqm each and refixing in the same opening including easing and adjusting including renewal of unserviceable screws etc. complete all as specified |
| 8 | Re-securing or easing & adjusting, without taking down shutter of any description exc 1 sqm but n. exc 2.0 sqm each complete all as specified and directed. |
| 9 | Re-securing or easing & adjusting, without taking down shutter of any description not exc 1.00 sqm each complete all as specified and directed. |
| 10 | S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 125 x 60mm, complete all as specified (thickness of steel sheet shall be 1.25mm) |
| 11 | S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 105 x 60mm, complete all as specified (thickness of steel sheet shall be 1.25mm) |
| 12 | S & F pressed steel frames for Cupboards with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 75 x 60mm, complete all as specified (thickness of steel sheet shall be 1.25mm) |
| 13 | M & L for PCC 1:3:6 type C1 (using 20mm graded crushed stone aggregates) as in filling back of pressed steel door frames/chowkats and for fixing hold fasts, etc., complete all as specified |
| 14 | S&F 2nd class HW 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, gauze, etc.; sizes of members of shutters as specified in SSR Part I Section 8, Clause 8.24 (a) all as specified |
| 15 | M & L 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified |
| 16 | S&F for steel windows/ventilators with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded, including steel window/ventilators complete all as specified and directed. |
| 17 | S&F for steel windows/ventilators withside hung shutters including projecting type hinges with steel handle and steel peg stay complete with outglazing bars, including steel window/ventilators complete all as specified and directed. |
| 18 | Supply and fixing steel windows or ventilators fixed type with glazing bars , including steel window/ventilators complete all as specified and as directed . |
| 19 | Supply and fixing mild steel framed work such as grills,guard bars, gate, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe290,Gde-E-165 complete all as specified and as directed |
| 20 | Dismantling boarding, any description, fixed in any position as in cup board shutters, kitchen cabinet of any thickness fixed with nails complete all as specified |
| 21 | S & F in repairs 18/19mm thick prelaminated particle board, interior grade, fixed with screws to timber frame work all as specified |
| 22 | S&F in repair Plywood 18 mm thickgrade BWR, type BB fixed with screws/nails to timber frame work and as in cupboard & cupboard shutter. |
| 23 | M&L Decorative laminate type 1 of surface finish 0.9 mm thick, any colour and pattern as approved, fixed with approved adhesive as per manufacturer"s instructions |
| 24 | M&L Decorative laminate type 1 of surface finish 0.75 mm thick, white colouras approved, fixed with approved adhesive as per manufacturer"s instructions |
| 25 | Supply and fixing in repair 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished and fixed complete all as specified and directed. |
| 26 | S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as perspecifications & drawing |
| 27 | S & F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C" channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of "C" channel using PVC solvent adhesive complete as per manufacturers specifications & drawings |
| 28 | S&FMild steel galvanised wire cloth 0.56mm nominal dia of wire and 1.18 mm average width of aperture fixed with tinned tacks or galvanised wire staple or fixed with beads supplied with joinery, complete all as specified |
| 29 | S&F in repairsMild steel galvanised wire cloth 0.56mm nominal dia of wire and 1.18 mm average width of aperture fixed with tinned tacks or galvanised wire staple, complete all as specified |
| 30 | M&L in repairs 2nd HW plain fillets, square, rectangular or triangular in section, wrought, secured with nails/brads or secured with screws, cross sectional area exc 6 sqcm and n. exc 13 sqcm, complete all as specified |
| 31 | S & F in Aluminuml Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified |
| 32 | S & F in mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified |
| 33 | S&F aluminium, anodised, barrel tower bolts of extruded section and fixed, 150mm length,completeall as specified |
| 34 | S&F aluminium, anodised, barrel tower bolts of extruded section and fixed, 200mm length,completeall as specified |
| 35 | S&F250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified |
| 36 | S&FAluminum anodisedhandles cast type 150 mm long completeall as specified |
| 37 | S & F floor door stopper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring all as specified |
| 38 | S & F in repairs 300mmmild steel ordinary rat tail rodsprings (helical spring) , including roller & roller plate, fixed with screws/welding to steel frames/chowkats, complete all as specified |
| 39 | S & F hasp & staple 100mm size, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified |
| 40 | S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flap (when open) 30mm all as specified |
| 41 | S & F in repairs 25mm dia fancy type PVC coated on MS pipe coloured curtain rod with brackets and knobs at both ends as per site requirement complete all as specified |
| 42 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/springs clips and fixing new ones all as specified |
| 43 | S & F for 3 mm thick,sheet glass ordinary quality and glazing with oil puttyin square n. exc 0.5 sqm in each pane all as specified |
| 44 | S & F for 3 mm thick,figured glass, pin head type and glazing with oil puttyin square n. exc 0.5 sqm in each pane all as specified |
| 45 | Welding in repairs n. exc 6mm thick metal and n. exc 2.50 cm in length complete all as specified |
| 46 | S & F in repairs brass chromium plated tubular towel rail, 20mm dia, D type 60cm long between flanges all as specified |
| 47 | S & F in repairs 600mm x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified |
| 48 | M&L for preparation of new steel and iron surfaces of any description exc 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified |
| 49 | M&L for preparation of new or previously untreated wood and wood based surfaces of any description exc 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified |
| 50 | M & LNon-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bedding layer in CM 1:6 and including roughening surfaces of old concrete/terrazzo finish floor by picking, sweeping clean and washing down with water to remove dust etc/ dismantling old tiles of any description,complete all as specified |
| 51 | M & LNon-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, on vertical surfaces as in skirting etc. set and jointed in neat cement slurry/paste and pointed in white or coloured cement to match over and including 10mm thick plaster in CM 1:4 including taking down old plastered/terrazzo finishes/old tiles etc; complete, all as specified |
| 52 | M&L non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc.set and jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed in CM 1:6 complete all as specified. |
| 53 | M&L non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc.set and jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed in CM 1:4 and including dismantling of old tiles/terrazzo finish etc, complete all as specified |
| 54 | S&F glazed ceramic dark coloured tiles 300x200mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface and taking down of old existing treatment & plaster, scrubbing down with water and disposing off the wastage to low laying areas to a distance exceeding 50 Mtr but not exceeding 100 Mtr away complete all as specified and directed. Make:- Orient,Kajaria,Bell ceramic Johnson |
| 55 | M & L glazed ceramic coloured tiles 7mm thick 350mmx 250mm/450mmx300 mmsize in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade etc complete all as specifiedincluding 10mm thick plasterin CM 1:4 including dismantling of old tiles of any description etc complete all as specified and directed. |
| 56 | M&L in repairs marble work (Udaipur green slabs) 18 to 20mm thick (table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade all as specified (Note : Rates deemed to include for provision hole through marble & RCC slab for LPG gas pipe and rounding and polishing of edges of marble slab) |
| 57 | M&L for Dismantling Stone slabs and tiles of any description or thickness in floors, aprons & shelves laid bedded and pointed in any mortar all as specified. |
| 58 | S & F in repairball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm bore ( weight 210 gms Minimum) complete all as specified |
| 59 | S & F in repairs, brass chromium plated shower rose 125mm dia, with swivel joints & and arms, and fixing to pipe & union all as specified |
| 60 | S & F in repairs 15mm bore, fancy type , chromium plated, angle valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle,screwed both ends for iron pipe all as specified |
| 61 | S & F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality |
| 62 | S & F in repair PVC valveless, syphonic action type flushing cistern, low level, with inlet ball valve, float and handle including brackets,PVC bend long type and connectin to flush pipe of any size and patterncomplete all as specified |
| 63 | S & Fin repair vitreous china wash basin, white, flat back, size 550 x 400mm excluding taps, wastes but including brackets complete all as specified |
| 64 | S & F in repairs sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall / RCC shelve and connecting union to pipe overall size 495mm x 420mm bowl complete all as specified |
| 65 | S & F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm complete all as specified |
| 66 | S & F in repairs 600mm x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified |
| 67 | S&F in repairs stainless steel plate racks of size 900mmx600mmx250mm and thickness of SS strip 1mm,fixed on walletc complete all as specified & directed by Engr-in-Charge. |
| 68 | S & F in repairs brass chromium plated tubular towel rail, 20mm dia, D type 60cm long between flanges all as specified |
| 69 | S & F in repairs 15mm bore fancy type chromium plated brass bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified |
| 70 | S & F in repairs 15mm bore fancy typechromium plated stop valve cast copper alloy, with long shank & cup (concealed type) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified |
| 71 | S & F in repairs brass chromium plated bottle traps for wash basins with inlet and out let screwed for pipe or connections including necessary packing, union and cap all as specified |
| 72 | S&F in repairs for three layer Rotational moulded polythlene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified |
| 73 | S & F in repairs 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps etc all as specified |
| 74 | S & F 110 mm bore, PVC (SWR) fittings such as bends of any radious, tee,shoe etc;fixed to PVC pipes, complete all as specified |
| 75 | Supply and fixing in repairs bib cock PTMT standard 15 mm dia of any colour, high pressure screwed for iron pipe & fixed ( male or female as required) complete all as specified and directed |
| 76 | S & F in repairs 20mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified |
| 77 | S & F in repairs vitreous China squatting pan, "Orissa" pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified and directed. |
| 78 | Dismantling and disconnecting of existing CI soil vent pipe 100 mmbore fixed to wall,laid in trenches incl all fittings & accessories, all as directed. |
| 79 | S & F cast iron soil waste and vent pipe 100mm bore with or without ears fixed with chemicalcement joints laid in trenches/floors or fixed in walls, all as specified. |
| 80 | Fixing only cast iron soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls, all as specified. |
| 81 | Sealing only joints of cast iron pipes and fittings 75/100mm dia with chemical cement and making the joints leak proof complete all as specfied |
| 82 | S&F in repairs oval access doors to cast iron pipes of 100mm bore with rubber washer & bolts & nuts as required complete all as specified |
| 83 | S & F in repairs CI bends any radius, 100mm bore, diminishing pieces or tapers, etc with or without oval access doors, complete all as specified |
| 84 | S & F in repairs 100mm bore CI branch pieces, double (spigot or socketed type) with oval access doors |
| 85 | Fixing only CI fittings 100mm bore of any type & description |
| 86 | Fixing only in repair low level flushing cistern any capacity after carrying out minor repairs such as stopping of leakage etc. complete all as specified and directed. |
| 87 | Renewing non skid /glazed ceramic tiles in patches in floor or walls,area n. exc 5 sqm including cutting out broken tiles carefully, preparing beds and laying or setting, jointing & pointing new tiles complete all as specified (new tiles shall be paid at supply only rate separately) |
| 88 | Dismantling carefully cement concrete in floor, etc around floor traps or any other concealed fittings, ( replacing floor traps/fittings if required and shall be paid at supplied only rate separately),sealing joints with solventcement or other suitable materials and making joint leak proof and making good surfaces with PCC 1:2:4 or CM 1:3 (repair/replacement of tiles in floor shall be measured and paid separately), complete all as specified |
| 89 | Supply onlyfloor trap 75/100 mm dia with grating including jointing to waste pipe |
| 90 | Supply only non skid ceramic coloured tiles 400 x400 x7mm thick |
| 91 | Supply only non skid ceramic coloured tiles 300 x300 x7mm thick |
| 92 | Supply only glazed ceramic coloured tiles 300 x200 x7mm thick |
| 93 | M&L PCC 1:4:8 type D-2 using 40mm graded crushed/stone agg for foundations, filling & mass concrete, sub-base & sub-floors, etc. complete all as specified. |
| 94 | M&L 25mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as floors, sub-floors etc and finishing surfaces of concrete topping as even & fair or even & rough to receive the topping layer all as specifed |
| 95 | M&L appply for a layer of hot blown bitumen of 85/25 penetration grade @ 1.75 kg/sqm incl cleaning the surface of roofor sunken etc complete all as specified |
| 96 | M&L 15mm thick cement plaster in CM 1:4 with water proofing compound (WPC to measurment & paid separately) and finishing top surface even & smoth as in roof slab /sunken floor , etc all as specified |
| 97 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, ant-syphonage pipe, etc. complete all as specified |
| 98 | Fixing only in repairs vitreous china wash down water closet pan (pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, ant-syphonage pipe, etc. complete all as specified |
| 99 | Note:- Net contract sum shall be calculated after deduction of Sch of credit. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
