Tender For Special Repair For Bldg No T-33 Camp Ii Of Def And Emp Coy, Hq 2 Mtn Div At Dinjan Mil Station And Certain Revenue Work Under Ge Dinjan
Tender Value
33.50 Lakhs
Estimated cost
Bid Submission
02 Sep 2023
0 days left
EMD
67000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dinjan → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair For Bldg No T-33 Camp Ii Of Def And Emp Coy, Hq 2 Mtn Div At Dinjan Mil Station And Certain Revenue Work Under Ge Dinjan
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing not exceeding 15 cm deepand getting out in soft/ loose soil complete all as specified and as directed. |
| 2 | M&L for hardcore of gauge of broken stone or boulders n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 3 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 4 | M&L for 100 mm thick cement concrete (1:4:8 ), type D-2, (40mm graded aggregate) in sub base of floor etc complete all as specified and as directed. |
| 5 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 600 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and as directed. |
| 6 | M&L for PCC (1:2:4),type B0 ( using 12.5 mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs,, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 7 | Demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 8 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 9 | M&L for Reinforced cement concrete (Nominal Mix) type B1 1:2:4 (20 mm graded aggregare) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 10 | M&L for Mild steel TMT bars 10 mm dia and over ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed. |
| 11 | Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished flat surface of concrete complete all as specified and as directed. |
| 12 | Demolition of brickwork or stone/ boulder masonry, built in Cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed |
| 13 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar in 1:4 complete all as specified and as directed |
| 14 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 15 | S&F for Joist, channel, angle, or tee sections of Fe 290 (Gde E-165) fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and as directed. |
| 16 | Dismantling of unframedtimber scantling 40Sqcm and over in section, fixed in any position complete all as specified and as directed. |
| 17 | Dismantling of framedtimber in fillets, rails, posts, rafters, purlins etc under 40Sqcmin section, fixed in any position complete all as specified and as directed. |
| 18 | M&L for second class hard wood timber scantling, clean swan as in frame work, fixed with nails complete all as specified and directed. |
| 19 | M&L second class hardwood plain fillets, square, rectangular or triangular in section, clean swan, fixed with nails, cross sectional area exc. 6.0 Sqcm but not exc. 13.0 Sqcm (as in STUDS), complete all as specified and as directed. |
| 20 | Taking down the chowkhats or frames not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and as directed |
| 21 | Taking down the chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each(without taking off shutters from the frames) complete all as specified and as directed |
| 22 | S&Fpressed steel frames for doors local work shop made of size 105x60mmwith one or more rebates using cold rolled commercial mild steel sheet of 1.2mm thick including providing and fixing necessary lugs, 100mm butt hinges, lock strike plate,shock absorber etcand including PCC filling of hollow section using plain cement concrete (1:3:6) type C1 complete all as specified and as directed. |
| 23 | S&Fpressed steel frames for doors local work shop made of size 125x60mmwith one or more rebates using cold rolled commercial mild steel sheet of 1.2mm thick including providing and fixing necessary lugs, 100mm butt hinges, lock strike plate,shock absorber etcand including PCC filling of hollow section using plain cement concrete (1:3:6) type C1 complete all as specified and as directed. |
| 24 | S&F 35 mm thick, second class hard wood, glazed and skeleton shutters with open rebated and prepared to receive glass, gauze, etc (without sash bars)edges of framing plain, chamfered or rounded, fitted with cut mitered beads for securing glass, etc, sizes of members of shutters as specified in SSR Part I, Section -8, clause 8.24 (a). |
| 25 | S&F 30 mm thick, second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc, divided in to squares, with plain, chamfered or rounded, mitered and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded as in SSR Part I Section 8 clause 8.24 (b) complete all as specified and as directed.. |
| 26 | S&F35 mm thick, second class hardwood, plain, framed, panelled shutters (any number of panels), with lock rail and panels of 9mm BWR commercial Ply or 12mm thick veneered particle board medium density, with commercial face veneering on both faces. the size of rail and styles 150 & 100mm, kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 27 | S&F for solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed. |
| 28 | S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails.MS frame shall be covered with heat moulded, plain colour PVC \"C\" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, complete all as specified and as directed by Engr-in-Charge. |
| 29 | S&F for 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed. |
| 30 | S&F 150 mm long, aluminium handles, cast type, anodised complete all as specified and as directed. |
| 31 | S&F 150mm long aluminium, anodised, barrel tower boltsof extruded section complete all as specified and as directed. |
| 32 | S&F for 300 mm long, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections etc complete all as specified and as directed. |
| 33 | S&F for mild steel small articles usingflat iron of size 25x3mm thicksuch asband, strap, hold fast, cleat, support, hook, hinges, base tie for door frame etc and other similar items conforming to Fe-290 (Gde E-165) complete all as specified and as directed. |
| 34 | M&L for plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) for embedding hold fast, bed block, cills, etcincluding necessary form work complete all as specified and as directed. |
| 35 | S&F for galvanised mild steel wire cloth of 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 36 | Supply and fix 3 mm thick ordinary quality sheet glass with oil putty or beadings supplied with joinery in square n exc 0.5 sqm in each all as specified and directed. |
| 37 | M&L for Mild steelframed work such as grills, gratings, gates etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-410-0 Gde E-250 complete all as specified and directed. |
| 38 | Dismantling of wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as specified and as directed. |
| 39 | M&L for anodised aluminium snap grid size 605 X 605 mm frame work for false ceiling complete all as specified and as directed. |
| 40 | S&F for hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed. |
| 41 | M&L for 6 mm thick high pressure, oceanic pre-primed, self embossed, non asbestos fibre cement decorative board, water, termite and fire resistant for insulation and acoustic purpose fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and as directed |
| 42 | Dismantling of asbestos cement sheets in roof coverings with ridges and keeping serviceable sheets in safe custody for reuse in the workas directed. |
| 43 | S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of profile as approved, any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 44 | S&F for pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges/valley gutter, fixed with self tapping screws complete all as specified and as directed.Note : Colour of ridge shall be same colour as that of sheet used for roof. |
| 45 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed |
| 46 | M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down withwater to remove dust etc complete all as specified and directed. |
| 47 | M&L for 40 mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) in sub base finishing cement concrete surface even and smoothwithout using extra cement complete all as specified and as directed |
| 48 | M&Lfor machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15mm thick screed bedin cement mortar (1:6) complete all as specified and as directed. |
| 49 | M&L for Machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over 10 mm thick back coat of cement mortar in 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed |
| 50 | Supply and fix non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and incl 10 mm rendering in CM 1:4 complete all as directed |
| 51 | M&L for coloured glazed ceramic tiles in vertical surface of size 450X 350X 7 mm thick over 10 mm thick back coat of cement mortar in (1:4)set and jointed in neat cement slurry and pointed in white or colour cement to match over complete all as specified and as directed. |
| 52 | M&Lfor 20 mm thick Granite (of any type) work (table rubbled and polished) in steps, Jambs, Pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm screed complete all as specified and directed |
| 53 | M&L for 75 mm thick plain cement concrete (1:3:6), type C1, (using 40mm graded stone aggregate) as in plinth protection, finishing surface even and smoothwithout using extra cement, complete all as specified and as directed |
| 54 | M&L for 75 mm thick plain cement concrete (1:3:6), type C2 (using 40mm graded stone aggregate) as in sub base of floor, etc complete all as specified and as directed. |
| 55 | M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade A complete all as specified and as directed |
| 56 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed. |
| 57 | M&L for rendering 15 mm thick on fair faces of external wall of brick work or stone surfaces in two layers (10 mm and 5 mm thick) in cement mortar (1:4) using water proofing compound in top layer (water proofing compound measured as separately) andfinished even and smooth without using extra cement complete all as specified and directed. |
| 58 | M&L for rendering 10 mm thick of internal wall on fair faces of brick work or concrete surfaces in cement mortar in (1:6) andfinished even and smooth without using extracement complete all as specified and directed. |
| 59 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 60 | Demolition of reed, lathing, single or double including battens and plaster or chicken wire lathing complete all as specified and as directed. |
| 61 | M&L for GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste fixed with tinned tacks of wire staples complete all as specified and as directed. |
| 62 | M&L for rendering 18 mm thick(12+6) externally one side of lathing in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement, mixed with integral water proofing compound @ 2% by weight of cement on top layer surface complete all as specified and directed.(Note : WPC shall be measured and paid separately against respective item). |
| 63 | M&L for rendering 12 mm thickon one side oflathing in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 64 | M&L for preparing newly plastered surfaces of wall, etc and applying three coats of white wash complete all as specified and as directed. |
| 65 | M&L for preparation of old decorated plastered surfaces of walls by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed. |
| 66 | M&L for preparing newly plastered surfaces of internal walls, etc and applying two coats of oil bound distemperover a coat of primer over 3mm thick wall care putty to a smooth surface complete all as specified and as directed. |
| 67 | M&L for preparing old plastered surfaces of walls by washing, rubbing down and scraping of existing distempering/painted surfaces etc and applying one coat of distemper oil emulsion complete all as specified and as directed. |
| 68 | M&L forpreparation of new plastered surface of walls etc and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and as directed. |
| 69 | M&L for preparation old decorated plastered or unplastered surfaces of wall cornices etc by brooming down or steel wire brushing, scraping down, the surfaces covered by smoke soot, growth of moulds and moos, efflorescent, having oil and gresase spots and applying one coat of cement base paint (white or tinted) complete all as specified and as directed |
| 70 | M&L for preparation of new wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 71 | M&L for preparation of old painted wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 72 | M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed. |
| 73 | M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 74 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed |
| 75 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed |
| 76 | Supply and laying of 16mm of CPVC pipes SDR 11& Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.tranches complete all as specified and directed. |
| 77 | Supply and laying of 20mm of CPVC pipes SDR 11& Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.tranches complete all as specified and directed. |
| 78 | Supply and laying of 25mm of CPVC pipes SDR 11& Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.tranches complete all as specified and directed. |
| 79 | S&F in repairs110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed |
| 80 | S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed |
| 81 | S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed |
| 82 | S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed |
| 83 | S&F for 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed |
| 84 | S&F for 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed |
| 85 | S&F for110 mm bore PVC (SWR) bends any radius complete all as specified and as directed |
| 86 | S&F for75 mm bore PVC (SWR) bends any radius complete all as specified and as directed |
| 87 | S&F for 16mm dia CPVC Brass thread elbow complete all as specified and as directed. |
| 88 | S&F for 20mm dia CPVC Brass thread elbow complete all as specified and as directed. |
| 89 | S&F for 25mm dia CPVC Brass thread elbow complete all as specified and as directed. |
| 90 | S&F for 16mm dia CPVC Brass thread Tee complete all as specified and as directed. |
| 91 | S&F for20mm dia CPVC Brass thread Tee complete all as specified and as directed. |
| 92 | S&F for25mm dia CPVC Brass thread Tee complete all as specified and as directed. |
| 93 | S&F for 16mm CPVC Brass thread union complete all as specified and as directed. |
| 94 | S&F for 20mm CPVC Brass thread union complete all as specified and as directed. |
| 95 | S&F for 25mm CPVC Brass thread union complete all as specified and as directed. |
| 96 | S&F for 16mm CPVC ball valve complete all as specified and as directed. |
| 97 | S&F for 20mm CPVC ball valve complete all as specified and as directed. |
| 98 | S&F for 25mm CPVC ball valve complete all as specified and as directed. |
| 99 | S&F for 25mm CPVC tank adopter complete all as specified and as directed. |
| 100 | Dismantling of water tank Capacity exc 500 not exc 1000 Ltrs and removing to store complete all as specified and as directed |
| 101 | S&F for 1000 litres capacityrotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top) as per IS 12701:1996, hoisted and fixed in position including provision of 20/15mm bore medium grade pipe for connecting inlet, outlet, overflow and washout pipe complete all as specified and as directed. |
| 102 | S&F for 20 mm bore, Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed. |
| 103 | S&F for 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 104 | M&L for cutting chases, pinning in brickwalls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20 cm girth complete all as specified and as directed. |
| 105 | S&F for 375 mm mild steel ordinary rat tail rod pattern springs including roller and roller platecomplete all as specified and directed |
| 106 | S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed. |
| 107 | S&F in repairs vitreous china squatting pan, \"Orissa\"pattern, size 580 x 440 mm white with integral foot rest and \"P\" or \"S\" trap, including provision of lime concrete bedding, connection to trap and flushing pipe providing 110mm PVC WC connector etc complete including making good to disturbed surfaces of floor to match with existing specifications complete all as specified and as directed. |
| 108 | S&F in repairs vitreous china wash down water closet pan (closed pattern), wall hung EWC/ white/ ivory/ off white, including connection to outgoing drain andflushing pipe, anti syphonic pipe with seat and cover, including flushing cistern and flush pipe complete all as specified and as directed. |
| 109 | S&F for Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 110 | S&F in repairs PVC low level flushing cistern 10 litre capacity, valveless, symphonic action type with inlet, ball valve, float and handle incl bracket, PVC conection pipe andflush pipe of polyethylene of low or high density or PVC. 32 mm dia complete all as specified and directed |
| 111 | S&F in repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps, waste chain and plug and porcelain stopper including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed. |
| 112 | S&F in repairs for vitreous china bowl urinal, flat back size of 465x355x265mm whitw with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) but fixing plug bedding urinal against wall in cement mortar (1:2) securing urinal to plug including 60mm long brass screws pointing around urinal back in cement mortar including 15mm brass stop cock and waste coupling brass CP complete all as specified and as directed. |
| 113 | S&F in repairs for PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed |
| 114 | M&L PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement including disconnection of old existing trap, and connected with existing water pipe complete all as specified and directed. |
| 115 | S&F for Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed. |
| 116 | PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed |
| 117 | S&F for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed |
| 118 | S&F for tubular towel rail, 20mm dia, D type, 60cm long Brass Chromium plated between flanges complete all as specified and as directed |
| 119 | S&F in repairs soap dish vitreous china coloured approximate size (160mmx160mmx90mm) complete all as specified and as directed. |
| 120 | S&F for Brass chromium plated shower rose 125 mm sizefixing to steel pipe or union complete all as specified and as directed |
| 121 | S&F in repair pillar taps of size 15mm, chromium plated fancy type cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered \"Hot\" or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed. |
| 122 | S&F in repairs for bib taps fancy type CP with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferule and fixed of size 15mm bore in repair complete all as directed. |
| 123 | S&F in repairs 15 mm bore dia cast copper alloy fancy type, chromium plated stop valves, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 124 | S&F in repairs 15mmstop valves(concealed type),cast copper alloy fancy type chromium plated, long sunk and cup, screwed both ends for iron pipe or for unions and fixed complete all as directed. |
| 125 | S&F for Anodised aluminium ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed |
| 126 | S&F 15mm dia angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and as directed. |
| 127 | M&L for 32 mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed. |
| 128 | Taking down carefully aluminium/copper point wiring (light, fan, socket or power)including unserviceablelight fittings, switch board complete,switch sockets, ceiling roses, pendants, regulators, sockets, etcand removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed. |
| 129 | M&L for point wiring with 1.5 Sqmm (nominal area), FRLSH PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and including PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc.) complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) FRLSH PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point including PVC terminal box (sunken type) with 3mm thickhylam sheet cover fixed with suitable sizes cadmium plated iron screws and washers etc. for mounting switches, sockets, fan regulators etc complete for one light/ fan /bell /buzzer point controlled by one, one way switches complete all as specified and as directed. |
| 130 | All as per item No 128 above but for one 3 pin 5 Amps,socket outlet,on Independent board. |
| 131 | All as per item No 128 above but for one 5 Amps, 3 pin socket outlet on the same board with other switches. |
| 132 | All as per item No. 128 above but wiring with cables of size 2.5 sqmm & cables of size 2.5 sqmm as continuous earth wire forone 15/16 amp multi socket out let on independent board. |
| 133 | S&F for switch piano, flush type single pole, 230 volts, 5 Amp one waybearing ISI marked complete all as specified and as directed. |
| 134 | S&F for socket outlet, 2 in 1, 3 pin, 5 Amps, 240V bearing ISI marked complete all as specified and as directed. |
| 135 | S&F for switch socket combination, 2 in 1,5 Amps,flush type, 240 volts bearing ISI marked complete all as specified and as directed. |
| 136 | S&F for switch socket combination, 5 in 1, 5/16 Amps, 240 volts, bearing ISI marked flush type complete all as specified and as directed. |
| 137 | S&F for ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body bearing ISI marked and including PVC box complete all as specified and as directed. |
| 138 | S&F for stepped type (five steps), electronic fan regulator, flush type(socket type) complete all as specified and as directed. |
| 139 | S&F in repair lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. |
| 140 | S&F in repairLED Lamp 9 Wattcomplete all as specified and as directed. |
| 141 | S&F for 20 Watt surface and wall mounting type LED batten with polycarbonate housing & integrated complete all as specified and as directed. |
| 142 | S&F in repairs recess mounted deep drawn size (2 ft x 2 ft) CRCA housing with higher power 36 Watt LED Seamless front frame with flat white hight transmission acrylic cover complete all as specified and as directed.Make : Cat. No. DROPDOWNFLAT2X2PLR36WLED830S of Havells or equivalent make ofAppendix \"A\". |
| 143 | S&F in repairs 25 Watt LED building security light new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07 including all fixing arrangement and taking down old light fittings of any type complete all as specified and as directed. |
| 144 | S&F for factory made board distribution (DB)double door in sheet metal enclosure with common bus bar at incomming end, single pole & neutral,8 way, 240 Volts suitable for housing MCBsincluding complete all as specified and as directed. |
| 145 | Supply & fix of MCB double pole6-32 Amps,\"C\" Series 10 KA 240 volts complete all as specified and directed. |
| 146 | Supply & fix of MCB SP 6-32 Amps,\"C\" Series 10 KA, 240 volts complete all as specified and directed. |
| 147 | Material and labour for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, burried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised wire of dia 4 mm as earthing lead by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1(using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar,funnel, wire mesh 20 mm bore galvanised (light grade) for watering, charcoal and salt in alternate layers including necessary execuation and eath works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I including taking out the old earthing material complete all as specified and directed.Note:No extra payment will be for the earthing GI wire of size 4 mm dia |
| 148 | Taking down unserviceable sub-main wiring up to 10 sqmm withrigid steelconduits/PVC casing-caping including cutting chases for taking out conduits and making good disturbed surfaces complete all as specified and as directed. |
| 149 | M&L for sub main wiring with two run of 6 Sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLSH), 1100 Volts grade drawn through PVC casing-caping/conduit of suitable size,fixed to wall/ceiling etc including one run of 6 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor(FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed.Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets. |
| 150 | S&F in repair PVC casing caping of size 20-25mm complete all as specified and as directed. |
| 151 | Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, armoured,nominal cross sectional area of main conductor 16 Sqmm, 4 core, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI pipe complete all as specified and as directed. Note : (1) Pipes shall be measured and paid separately under relevant items of this schedule.(2) Excvation and earth work shall be measured and paid seperately. |
| 152 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depthfor foundation, pipeline etc area not exceeding 10 Sqm on plan and getting out in soft/loose soil complete all as specified and as directed. |
| 153 | Returning, filling in, including spreading in layers not exceeding 25cm, levelling, watering and well ramming as in soft/loose soil complete all as specified and as directed. |
| 154 | Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above starting pointcomplete all as specified and as directed. |
| 155 | M&L for sand cushioning with dry clean sand 15cm below cable and 8cm above the cable complete all as specified and as directed. Note : Punned thickness shall be measured for payments. |
| 156 | Material & Labour for common burnt clay building bricks (locally available best quality), sub-class ‘B’ designation 75 of suitable size available in market to cover LT underground cables, laid dry and flat abutting each other with gaps not exceeding 10mm including taking down old unserviceable bricks complete all as specified and directed. |
| 157 | Boring of holes horizontall for laying not less than 40mm pipe (minimum depth 0.75 mtr from top level) under the road pavement, hardstanding using trenchless technology and inserting GI pipe 80/50/40mm bore for drawing the cables complete all as specified and as directed.Note: (1) Cost of accessories required for making hole/bore deemed to be included in the quoted rate. (2) Pipes shall be measured and paid separately under relevant items of this schedule. |
| 158 | M&L for 25 mm bore, steel tubes, galvanised, light grade with all fittings, laid in floor/road crossing/drain etc as in UG cable protection complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 159 | Taking down carefully sserviceable energy meter deposit in safe costody, after repair work fix in original position after minor repaircomplete all as specified and directed. |
AI Tender Summary
Tender Timeline
Aug 22, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 04, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender