}

Tender For Provision Of Drilling Bore Supplying And Lowering Casing, Prvdng And Fixing Casing Shoe And Bit Tube As Per Reqmnt, Dvlpmnt Of Tube / Bore Well, Yield Testing And Disinfection Etc, Supply And Fixing Of Submersible Motor Pump Complete At Sew, dimapur-Nagaland

Border Roads Organisation-BRO has published Tender For Provision Of Drilling Bore Supplying And Lowering Casing, Prvdng And Fixing Casing Shoe And Bit Tube As Per Reqmnt, Dvlpmnt Of Tube / Bore Well, Yield Testing And Disinfection Etc, Supply And Fixing Of Submersible Motor Pump Complete At Sew. Submission Date for this Tender is 15-09-2023. Bore Well Tenders in dimapur Nagaland. Bidders can get complete Tender details and download the document.




Tender Notice

39265874
Tender For Provision Of Drilling Bore Supplying And Lowering Casing, Prvdng And Fixing Casing Shoe And Bit Tube As Per Reqmnt, Dvlpmnt Of Tube / Bore Well, Yield Testing And Disinfection Etc, Supply And Fixing Of Submersible Motor Pump Complete At Sew
Open Tender
Indian
Nagaland
dimapur
15-09-2023

Tender Details

Provision Of Drilling Bore Supplying And Lowering Casing, Prvdng And Fixing Casing Shoe And Bit Tube As Per Reqmnt, Dvlpmnt Of Tube / Bore Well, Yield Testing And Disinfection Etc, Supply And Fixing Of Submersible Motor Pump Complete At Sewak Dimapur

Key Value

Document Fees
Refer document
EMD
INR 7020.0 /-
Tender Value
INR 3.51 Lakhs /-

BOQ Items

Name of Work: Name of Work: PROVISION OF DRILLING BOREOF 152 MM DIA., SUPPLYING AND LOWERING ISI MARKED 125 MM DIA. NB 5 MM THICK MSREW CASING, PROVIDING AND FIXING SUITABLE CASING SHOE AND BIT TUBE AS PER REQUIREMENT,DEVELOPMENT OF TUBE WELL/BORE WELL AND YIELD TESTING WITH AIR COMPRESSOR THROUGH V-NOTCH AND DISINFECTION ETC., SUPPLY AND FIXING OF 5 H.P. THREE PHASE SUBMERSIBLE MOTOR PUMP SET COMPLETEAT HQ CE (P) SEWAK COMPLEX IN DIMAPUR OF NAGALAND STATE
Sl. No. Item Description
1Transportation of suitable truck mounted DTH/ODEX percussion/ calyx/ RC/drilling rigs along with necessary accessories etc. to the site work and the erection of rig including levelling etc. as per direction of Engineer in Charge.
2Drilling BOREof 152 mm dia as per IS 2800-1979 using ODEX (TURBEX) attachment required drilling in collapsible Strainer conglomerate, boulders, pebbles, gravels silt clay etc. including cost of attachments consumables stores bit water, POL etc. complete with system of simultaneous lowering of 125 mm nominal bore 5.0 m thick MSERW fin cut casing pipe which will be welded together using 2.5 mm or 3.25 mm dia advani oerlikon or equivalent electrodes with one plain and other end chamfered to 50 degrees removing paint on the area to be welded inclusive of the cost of biodegradable and nontoxic foam flush etc. complete in all respect as per direction of Engineer in Charge.
3Supplying and lowering IS marked 125 mm dia NB 5 mm thick fin cut MSREW casing as per requirement of ODEX attachment from approved manufacture complete in all respect as per direction of Engineer-in-Charge
4Providing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete to all respect.
5Development of tube well/bore well and yield testing with air compressor through V-notch and disinfection etc. as per IS 2800-1979
6Supply of 5H.P. Three Phase Submersible motor pump set
7Supply of 5H.P.Electric panel
8Supply of 2.5mm submersible cable
9Supply & Fixing of Nipple cable reducer
10Supply of safety wire
11Charges for lowering of submersible pump
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail