}

Tender For Estimate For Rejuvenation And Beautification Of Kala Singha Drain Under Jalandhar Smart City Mission (Rd. 132250-142750), jalandhar-Punjab

Water Resources Department-WRD has published Tender For Estimate For Rejuvenation And Beautification Of Kala Singha Drain Under Jalandhar Smart City Mission (Rd. 132250-142750). Submission Date for this Tender is 21-09-2023. Drainage Tenders in jalandhar Punjab. Bidders can get complete Tender details and download the document.




Tender Notice

39263576
Corrigendum : Tender For Estimate For Rejuvenation And Beautification Of Kala Singha Drain Under Jalandhar Smart City Mission (Rd. 132250-142750)
Open Tender
Indian
Punjab
jalandhar
21-09-2023

Tender Details

Estimate For Rejuvenation And Beautification Of Kala Singha Drain Under Jalandhar Smart City Mission (Rd. 132250-142750)

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 04-Sep-2023 Corrigendum no. 22 Date 11-09-2023
2 11-Sep-2023 Corrigendum no. 23 Date 21-09-2023

Key Value

Document Fees
INR 5000 /-
EMD
INR 1475603.0 /-
Tender Value
INR 7.37 Crore /-

BOQ Items

Name of Work: Estimate for Rejuvenation and Beautification of Kala Singha Drain under Jalandhar Smart City Mission RD(132250-142750)
Sl. No. Item Description
1Jungle clearance on running canals and branches, and drains with discharge upto 9 cum/s including boundry road Discharge exceeding 4.5 cum/s
2Removal/ Clearance of slush from wet drains by mechanical means
3Making dewatering arrangement by pumping set 4 *4 (Tractor driven)
4Transporting to the embankment locations with all lifts and leads using hydraulic Tractor Trolly ( Total lead 8.1km.) Disposal/carraige from 0 upto 450m
5Transporting to the embankment locations with all lifts and leads using hydraulic Tractor Trolly ( Total lead 8.1km.) Disposal/ carraige additional beyond 450m upto 1Km
6Transporting to the embankment locations with all lifts and leads using hydraulic Tractor Trolly ( Total lead 8.1km.) Disposal/carraige for every additional Km upto 10Km
7Earth work for lip cutting for lining of irrigation channels inclusive of all allowances, lead and dressing 0 to 1.5 m depth
8Earth work for lip cutting for lining of irrigation channels inclusive of all allowances, lead and dressing depth exceeding 1.5 ms but upto 3.0 ms.
9Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cumbucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements oflines, grades and cross sections, including all lifts and combined lead upto 30m.
10Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches,stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.
11Extra for laying earth/fly ash as per specifications in 20 cm. Layers and dressing but excluding cost of rolling.
12Extra for watering the earth/fly ash laid in 20 cm layers as per specifications for compaction.
13Extra for rolling to specifications.
141.8 meter high G.I. barbed wire fencing with 2.4 meter angle iron posts 50x50x6mm placed every 3meters centre to centre 0.6 meter below ground level, every 15th post, end post, corner post suitablystrutted and provided with 12 horizontal lines and two diagonals interwoven with horizontal wires fixed with GI staples, turn buckles etc. including foundation concrete 1:2:4 of size 0.30x0.30x0.75m for eachpost complete as per technical clause 808 of MORT&H specifications
15Stone or Kankar block pitching on slopes of guide bandh and protection woks
16Boulder masonry in cement mortar (1:6) in foundations and plinth.
17Filling spall on side slopes behind pitching
18Cement grouting stone ptiching 1:3:6 mixing by mechanical means using concrete mixer volumetric type
19Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications.PCC Grade M15
20Providing, laying, jointing, fixing and testing ISI Marked uPVC Pipe with G.I. specials as per ISI-4985, including cost of G.I. specials such as tees, bends, sockets, elbows etc. testing inside building complete.uPVC Pipe 6 Kgf/cm2 50mm i/d
21Providing boundary pillars reinforced cement concrete M-15 grade boundary pillars of standard design as per IRC 25-1967 etc. Complete as per technical clause 806 of MOR and TH specifications.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail