Drinking Water Supply and Sanitation Government Departments Closing in 0 days TDR #39263102

Tender For Renovation And Boundary Wall Of Vijaiya Upgraded Plus 2 High School, Block- Barhi, District- Hazaribag

Issued by Government Departments · barhi, Jharkhand
Tender Value
98.13 Lakhs
Estimated cost
Bid Submission
02 Sep 2023
0 days left
EMD
1.96 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
barhi → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Renovation And Boundary Wall Of Vijaiya Upgraded Plus 2 High School, Block- Barhi, District- Hazaribag

BOQ

Name of Work:Renovation and Boundary Wall Of Vijaiya Upgraded +2 High School, Block - Barhi , District - Hazaribag
Sl. No. Item Description
1Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item - A) and disposal of excavated earth to a distance up to 50m. Including all lifts with levelling ramming the foundation trenches removing roots of trees shurbs all complete as per approved design & building specification and direction of E / I.( 5.1.1 BCD)
2Extra for earth work in hard soil (vide classification of soil item-B)as per specification and direction of E/I.(5.1.2) BCD
3Providing coarse clean sand filling in foundation trenches and plinth including ramming and watering in layers not exceeding 150mm thick with all leads & lifts including the cost of all materials, labour, royality, & taxes all complete as per building specification and direction of E/I. (5.1.10 BCD)
4Providing designation 75Bone brick flat soling joints filled with local sand including the cost of watering taxes royality all complete as per building specification and direction of E/I. (5.6.3 BCD)
5Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level:1:2:4(1Cement :2 coarse sand (zone-III):graded stone aggregate 20 mm nominal size).(5.3.1.2 BCD)
6Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.(5.2.6 BCD)
7Providing R.C.C. M-200 with nominal mix (1:1.5:3) in foundation with approved quality of stane chips 20mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 Excluding screeing, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.(5.3.9.1 BCD)
8Centering and shuttering including strutting, propping etc and removal of formfor foundation, footing, bases of Columns etc. for mass concrete.(5.3.17.1 BCD)
9Centering and shuttering including strutting, propping etc and removal of form for Columns. (5.3.17.6 BCD)
10Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering ,shuttering , finishing and reinforcement -All work up to plinth level.1:1.5:3(1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20mm nominal size)(5.3.10 BCD)
11Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).(5.3.11 BCD)
12Providing designation 75 B brick work in C.M.(1 :6) in superstructure with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scafolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l.(5.2.14 BCD)
13Centering and shuttering including strutting, propping etc. and removal of form for Lintels, Beams, Plinth beams, girder, bressumers and cantilevers. (5.3.17.5 BCD)
14Centering and shuttering including strutting, propping etc. and removal of form forWheather shade, chajjas, corbels etc, including edges. (5.3.17.19 BCD)
15Centering and shuttering including strutting, propping etc. and removal of form for suspended floors roof landing, balcony and access platform. (5.3.17.3 BCD)
16Supplying, fitting and fixing 20 gauge G.C.I. sheet gate fitted on. M.S. angle frame of size 60 x 60 x 6mm including cost of fabrication providing necessary locking arrangement with haskal end dommy duly fixed in P.C.C. (1:2:4) block of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. (5.5.29 BCD)
17Providing Tor steel reinforcement 8mm dia. rodas per approved design & drawing excluding the carriage of M.S. rods (straight or in coils) to work site, cutting, bending, and binding with anneled wire with the cost of wire removel of rust placing the rods in position( excluding carriage of bars to work site) all complete as per building specification and direction of E/I. TMT Fe 500 (Only valid for Tata (Tiscon),Sail.JSPL,Electrosteel steels Ltd.Bokaro and Vizag (RINL)) (5.5.4 BCD)
18Providing Tor steel reinforcement 10mm,12mm &16mm dia. rodas per approved design & drawing excluding the carriage of M.S. rods (straight or in coils) to work site, cutting, bending, and binding with anneled wire with the cost of wire removel of rust placing the rods in position( excluding carriage of bars to work site) all complete as per building specification and direction of E/I. TMT Fe 500 (Only valid for Tata (Tiscon),Sail.JSPL,Electrosteel steels Ltd.Bokaro and Vizag (RINL)) (5.5.5 (a) BCD)
19Providing Tor steel reinforcement 10mm,12mm &16mm dia. rodas per approved design & drawing excluding the carriage of M.S. rods (straight or in coils) to work site, cutting, bending, and binding with anneled wire with the cost of wire removel of rust placing the rods in position( excluding carriage of bars to work site) all complete as per building specification and direction of E/I. TMT Fe 500 (Only valid for Tata (Tiscon),Sail.JSPL,Electrosteel steels Ltd.Bokaro and Vizag (RINL)) (5.5.5 (b & c) BCD)
20S/F/F MS grill with ms grills msde of 20x6 mm ms flat or 16 mm ms squre bar as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I.( where materials is not supplied by the deptt.) (5.5.12 BCD)
21Providing and fixing fan hook of 16 mm dia M.S. bar 1 Meter long bent to required size and shape , placed in position and fixed in R.C.C. slab / beam at the time of casting all complete as per building specification and direction of E/I. (5.5.13 BCD)
22Providing and laying doublecharge vitrified floor tiles in different size ( thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622/ISO 13006 of approved make in all colours and shades laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc, size of tiles 600mm X 600mm.(5.6.28 BCD)
23Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5including screening, curingwithall leadsand liftsof water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.( 5.7.6 BCD)
24Provinding 12 mm thick water proof cement plaster (1:6) with clean sand of F.M 1.4 including, screening, curing withall leads andlifts of water, scaffolding taxes and royalty all complete as per buildingspecification and direction of E/I. (5.7.3 BCD)
25Providing two coat of oil bond distemper of approval shade and make over a coat of cement primer over new surfaceincluding preparing the plastered surface by rubbing wmooth with pumice stone or fine sand paper applying puty wherever required scaffolding washing og floors and taxes all complete as per building specification and direction of E/I.(5.8.18 BCD)
26Supplying fitting and fixingM.S. grill gate with M.S. grill made of 20x6 mm M.S. flats or 16 mm M.S square bars filled on 25x25x6 mm M.S. angle fram of size 60x60x6 mm including cost of fabrication providing necessary locking arrangement with haskel and dommy duly fixed in P.C.C (1:2:4) blocks of required size,applying a priming red lead paint over steel works,taxes all complete as per drawing specification and direction of E/I.(when steel is not supplied by deptt.) (5.5.30 BCD)
27Providing and fixing stainless steel ( Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge,(for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts fasteners etc) (10.28 DSR)
28Providingprimer one coat of red lead paint of approved make new steel surface including preparing the surface after cleaning, removing dust. Dirt. Scales smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/l.( 5.8.41 BCD)
29Providing and applying while cement based putty of average thickness 1 mm of approved brand and manufacture over the plastered wall surface to prepare the surface even and smooth complete. (13.80 D.S.R)
30Finishing walls with premium acrylic Smooth exterior paint...Applied @1.43 Ltr./ 10 Sqm over and including priming coat exterior primer applied @ 2.20 kg/10 sqm.(13.47.1 D.S.R)
31Providing two coats of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface thoroughly cost of scaffolding and taxes all comple as per building specification and direction of E/I.(5.8.43 BCD)
32Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.(5.3.8 BCD)
33Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq mm FR PVC copper conductor single core cable in surface /recessed PVC conduit, piano type switch.phenolic laminated sheet with suitable size PVC/MS box etc as required. Group B (1.1.2 Energy)
34Wiring forckt /submain wiring along with earth wire with the following size of FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit As requied.(2x 4.0 sq mm + 1 x 4.0 sq mm earth wire) (1.7.3 Energy)
35Wiring forckt /submain wiring along with earth wire with the following size of FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit As requied. (2X 2.5 sq mm + 2.5 sq mm earthwire). (1.7.2 Energy)
36Supplying and fixingof following size /modules,G.I. box along with modular base & cover plate for modular switches in reccess etc required.1 or 2 module (78mmx78mmx45mm) (1.27.1 Energy)
37Supplying and fixingof following size /modules,G.I. box along with modular base & cover plate for modular switches in reccess etc required.6 module (78mm x 205mmx50mm). (1.27.3 Energy)
38Supplying and fixingof following size /modules,G.I. box along with modular base & cover plate for modular switches in reccess etc required.8/9 module (78mm x 205mmx50mm). (1.27.4 Energy)
39Supplying and fixingof following size /modules,G.I. box along with modular base & cover plate for modular switches in reccess etc required.12 module (135mm x 205mmx60mm). (1.27.5 Energy)
40Supplying and fixing following modularswitch/socket on the existing modulear plate & Switch box including connections but excluding modular plate etc as required. 5/6 amps,one way switch. (1.24.1Energy)
41Supplying and fixing following modularswitch/socket on the existing modulear plate & Switch box including connections but excluding modular plate etc as required.5/6 amp, 3 pin socket outlet. (1.24.4 Energy)
42Supplying and fixingstepped type electronic fan regulator on the existing modular plate & switch box including connection bot excluding modular plate etc. required. (1.25 Energy)
43Supplying and fixing brass batten/ angle holder including etc as required. (1.34 Energy)
44supplying and fixing of following size of PVC conduict along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit are required. ( 25mm ) (1.21.2 Energy)
45Supplying and fixing 2 pin , 5 amp ceiling rose on the existing junction box/ wooden block including connection etc. as required. (1.33 Energy)
46Supplying and fixing followingrating , double pole,240 voltss, isolate in the existing MCBDBcomplete with connections, testing and commissioning etc required. 63 amps (2.14.2 Energy)
47Supplying and fixing following240 voltss, 10 kA\"C\" curve, miniature circuit breaker suitable forincluding load of following poles in existingMCBDBcomplete with connections existing and commissioning etc as required. 6/32 amps,Sngle pole (2.12.1 Energy)
48Supplying and fixing single pole blanking plate in the existingMCB DB complete etc. as required. (2.13 Energy)
49Providing and fixing following capacity TP&N disconnector fuse switch unit in existing metal board with rewireable type fuse, including drilling holes in metal board making connections. etc as required.63 amp Double pole. (2.1.3 Energy)
50Earthing with G.I. pipe 4.5 metre long 40 mm dia including accessories, and providing masonry enclosure with cover plate having arrangement and watering pipe etc. with charcoaland salt as required. (3.2 Energy)
51Supplying and laying 8 SWG copper wire at 0.50 mtr below ground level for conductor earth electrode including soldering etc. as required. (3.7 Energy)
52Supplying and fixing of ceiling fan - 48\" dia(1200mm)BLDC 5star IS 374:2019.P.N-52 (M-779) Energy
53Supplying and fixing of holder type LED 9/10 watt.P.N-54 (M-855) Energy
54Carriage of materials including loading, unloading, stacking ---do--do-- all complete as per specification and direction of E/I.Cement:-
55Sand(Local):-
56Sand(Coarse) :-
57Chips :-
58Bricks:-
59Steel:-
60Goods & Services Tax (G.S.T.) @ 18%
61Labour Cess @ 1%

AI Tender Summary

OUR REF NO 39263102
AUTHORITY Government Departments
TENDER VALUE 98.13 Lakhs
LAST DATE 02-09-2023
Authority
Authority Name Water Resources Department
Work Description Renovation And Boundary Wall Of Vijaiya Upgraded Plus 2 High School, Block- Barhi, District- Hazaribag
Basic Detail
Tender No DMFT/MID/HAZARIBAG/F2 -07/2023-24 (GR.NO.-01)
Bidding Type Tender
Location
City barhi
State Jharkhand
Key Dates
Publish Date 22 Aug 2023
Submission Date 02 Sep 2023
Open Date 06 Sep 2023
Finance
Tender Value 98.13 Lakhs
Tender Fee 10000
EMD 1.96 Lakhs
Exemption Not Available
Document List
92dbb166-1604-4cd3-8d23-9e4a5c5365f2.html
02Specialconditonforf2onl.pdf
BOQ_100344.xls
Tendernotice_1.pdf
TENDER_DOCUMENT_F2_07_01.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 22, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 02, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Sep 06, 2023

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

92dbb166-1604-4cd3-8d23-9e4a5c5365f2.html

pdf

02Specialconditonforf2onl.pdf

xls

BOQ_100344.xls

pdf

Tendernotice_1.pdf

pdf

TENDER_DOCUMENT_F2_07_01.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender