Tender For Procurement Of Gauge, Ups Cooling Fan, Air Filter Regulator And Rotameter For Dm Plant On Oandm Head Of Unit 8And9, Dtps Through Open Tender (E-Tender).

Sharing tender

Procurement Of Gauge, Ups Cooling Fan, Air Filter Regulator And Rotameter For Dm Plant On Oandm Head Of Unit 8And9, Dtps Through Open Tender ( E-Tender ) . , Metal Tube Rotameter Operating Conditions:- Fluid: Water, Sp. Gr:1, Press: 1Kg / Cm2 Viscosity: 0.725 Cp, Temp: 30Degc, Materials:- Measuring Tubes: Aisi Ss 316 Water Parts:Aisi Ss 316, Float: Aisi Ss 316 Float Retainers: Aisi Ss 316 Flanges: Aisi Ss 316 Connections:- Standard: Ansi 150#B 16.5 Flange Facing: Rf Separated Inlet-Outlet Direction: Bottom- Top Other Details:- Range Ability: 10:1 Accuracy: +- 2% Of Full Flow Test Press: 40Kg / Cm2, Output- 4-20Ma Accessories: Gasket With Nut-Bolts Measuring Range-0.75-7.5 M3 / Hr Type: Flanges, Size: 50Nb Distance: Ff 250Mm , Metal Tube Rotameter Operating Conditions:- Fluid: Water, Sp. Gr:1, Press: 1Kg / Cm2 Viscosity: 0.725 Cp, Temp: 30Degc, Materials:- Measuring Tubes: Aisi Ss 316 Water Parts:Aisi Ss 316, Float: Aisi Ss 316 Float Retainers: Aisi Ss 316 Flanges: Aisi Ss 316 Connections:- Standard: Ansi 150#B 16.5 Flange Facing: Rf Separated Inlet-Outlet Direction: Bottom- Top Other Details:- Range Ability: 10:1 Accuracy: +- 2% Of Full Flow Test Press: 40Kg / Cm2, Output- 4-20Ma Accessories: Gasket With Nut-Bolts Measuring Range- 6-60 M3 / Hr Type: Flanges, Size: 100Nb Distance: Ff 350Mm , Pressure Gauge ( Back Entry ) Range: 0-300 Psi / 0-2100 Kpa, Dial Size: 75Mm Fitting: ¼”Npt, Ss316 , Vacuum Gauge ( Back Entry ) Range: -760Mmhg To 0 Mmhg, Dial Size: 75Mm Fitting:3 / 8”Npt, Ss316 , Cooling Fan ( 4 Inch ) Size: 120 X 120 X 38 Mm Motor Structure: Shaded Pole Motor With Inner Rotor Running, Impeller: Made By Injection Mould With Black Plastic, Pbt± 30% Glass , Fibre + Vo Class Of Anti –Burning Liquid , Operating Voltage- 180-245 Vac Current: 0.11 / 0.20 Amp Insulation Grade: Class B, Protection Grade: Ip44 Operating Temperature: -20 To +70 Deg ( With Ball Bearing ) , Min Life : 60000 Hrs At 25 Degree , Cooling Fans ( 6 Inch ) Size: 172 X 150 X 51 Mm 230 Volts, 50 / 60 Hz, 0.31 Ampere, 45 Watt, 2800 Rpm , Motor Structure: Shaded Pole Motor With Inner Rotor Running, Impeller: Made By Injection Mould With Black Plastic, Pbt± 30% Glass Fibre + Vo Class Of Anti –Burning Liquid Insulation Grade: Class B, Protection Grade:Ip 44 , Air Filters / Regulator With Plastic Knob Adjustment, Outlet Pressure- 1 To 10 Bar Specification: Pipe Thread- 1 / 2 Npt ( F ) , Body Material- All Alloy Die-Cast Filter Element Size - 50Micron Filter Element Material- Plastic ( Polypropylene ) Filter Bowl Material- Transparent Polycarbonate Maximum Inlet Pressure-10 Bar, Drain- Manual Maximumoperating Temperature- 80 C Regulator Type-Relieving Diaphragm Pressure Adjustment- Non Rising Plastic Knob Regulated Secondary