Indian Institute Of Management-IIMA has published Tender For Design, Manufacturing, Supply And Installation Of Classroom Furniture At Iim Shillong Umsawli Campus.. Submission Date for this Tender is 07-10-2023. Classroom Furniture Tenders in shillong Meghalaya. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 01-Sep-2023 | Addendum 1 | Other | 22-09-2023 |
| 2 | 13-Sep-2023 | Extension of bid submission end date | Date | 05-10-2023 |
| 3 | 13-Sep-2023 | Reply of Pre-bid queries | Other | 05-10-2023 |
| 4 | 14-Sep-2023 | Corrigendum 2 | Other | 05-10-2023 |
| 5 | 05-Oct-2023 | Extension of Bid date | Date | 07-10-2023 |
| Sl. No. | Item Description |
| 1 | TENDER FOR DESIGN, MANUFACTURE, SUPPLY & INSTALLATION OF FURNITURE FOR THE CLASSROOM AT IIM SHILLONG CAMPUS AT UMSAWLI |
| 2 | CLASSROOM TABLE-HORSESHOE/Semicircular: Providing and placing in position table of the following specifications. Top and modesty panel shall be made 18mm thick BWP Plywood laminated (with 1mm thick matt finished laminate with grains laid as per approved sample, laminate colour to match colour of teak wood edge beadings and mouldings. Inner surface of modesty and bottom of tabletop shall be provided with balancing laminate of minimum 0.8mm thick matching with tabletop laminate of approved shades.Edge beadings and mouldings made in teak wood shall be as per design.The teal wood mouldngs shall be sanded and finished such that all edges are slightly champhered (0.5 to 1mm) and shall be finished in matt finished PU coating with Four Coates. Tabletop Supported on MS Frame shall be powder coated to the thickness of 40 microns. All ends of frame shall be plugged with plastic moulded end cap. The Grommet shall be made from antiskid plastic moulded components to facilitate access electrical / data / voice sockets access from top. Vertical cable 106eparately from bottom of table along with raceway having cut outs of required sizes along with Hydraulic Pop Up Box/Cable Cubby with Audio, Power Ports and USB C type Port. Table shall have adequate provisions for the movement of electric and LV cables 106eparately at desired levels. Table having provision of pen holder, bag holder and having a provision of name plate. All necessary SS hardware/ fitting/ hinges/ locks/ handles etc. shall be provided of from as per list of approved makes. The material procure from FSC certified supplier / OEM and complete as per the direction of Engineer-In-Charge. |
| 3 | CLASSROOM CHAIR-HORSESHOE/Semicircular/Rectangular: Supplying and placing in position of chair as per photograph. Overall height 945mm max, 870 min, overall width 560mm, overall depth 530mm, seat size 470mm (W) x 460mm (D) and back size 470mm (W) x 490 (H), seat and back are made up of 12mm thick hot pressed ply wood upholstered with fabric and molded with polyurethane foam (Density = 45 +/-2 kg/m 3 and Hardness = 20 +/- 2 at 25% compression). The back plywood shall be designed with contoured lumbar support for extra comfort. The chair shall have an center tilt mechanism and tilt tension adjustment, single locking facility and full 360 degrees swivel mechanism, the one piece arm rest should be made up of black integral skin polypropylene with 50-70 Shore “A” hardness reinforced with MS insert, the armrest are scratch and whether resistant. The arm rests are fitted to the seat with a connecting strip assembly made of 5mm of HR steel. The prong (base) is made of nylon and fitted with 5nos. twin wheel castors (castor wheel dia. 50mm). The prong (base) is 660mm pitch center dia (700mm with castors). The telescopic bellows is 3 piece telescopic type and injection molded in black polyurethane. The pneumatic height adjustment shall have adjustment stroke of 120mm and shall be operated at 30kgs extension force. The material procure from FSC certified supplier / OEM and complete as per the direction of Engineer-In- Charge. |
| 4 | CLASSROOM TABLE (FOR 40-SEATER) Rectangular: Providing and placing in position table of the following specifications. Top shall be made 18mm thick made of moderately kiln seasoned beech wood, Base material shall be made 18mm thick BWP plywood 2mm thick PVC edge banding on all working area. The Modesty shall be 18mm thick kiln seasoned beech wood. Base material shall be made 12 mm thick BWP plywood 2mm thick PVC binding on all visible area. Inner side of modesty and below the tabletop balancing laminate shall be minimum 0.6mm thick matching with tabletop laminate of approved shades. All wooden surface to be sprayed with four coats of PU polish matt finished in desired shade. Legs shall be made from 1.6 mm Matt silver anodized aluminum extrusion/ MS legs. The wire carrying is facilitated through the hollow space between duel modesty and all the wiresareconcealedbetweentwo modesty. Tabletop Supported on MS legs shall be powder coated to the thickness of 40 microns. Both ends of Aluminum extrusion covered with plastic moulded end cap. The Grommet shall be made from antiskid plastic moulded components to facilitate access electrical / data / voice sockets access from top. Table shall have adequate provisions for the movement of electric and LV cables 108eparately at desired levels. Raceway having cut outs of required sizes along with Hydraulic Pop Up Box/Cable Cubby with Audio, Power Ports and USB C type Port. Table having provision of pen holder, bag holder and having a provision of name plate. All necessary SS hardware/ fitting/ hinges/ locks/ handles etc. shall be provided of from EBCO / Hettich. The material procure from FSC certified supplier / OEM and complete as per the direction of Engineer-In-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
