}

Tender For Provision Of Guard Room With Toilet Block Athffr At Inf School Under Ge (Mis) Mhow, Indore-Madhya Pradesh

Military Engineer Services-MES has published Tender For Provision Of Guard Room With Toilet Block Athffr At Inf School Under Ge (Mis) Mhow. Submission Date for this Tender is 18-09-2023. Building Work Tenders in Indore Madhya Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

39252205
Corrigendum : Tender For Provision Of Guard Room With Toilet Block Athffr At Inf School Under Ge (Mis) Mhow
Open Tender
Indian
Madhya Pradesh
Indore
18-09-2023

Tender Details

Tender For Provision Of Guard Room With Toilet Block Athffr At Inf School Under Ge ( Mis ) Mhow; 1 B / R Works: 2 Surface Dressing Not Exceeding 15 Cm Deep In Soft / Loose Soil All As Specified . 3 Excavationover Areas Not Exceeding1.5 M Deep And Getting Out In Soft / Loose Soil Complete All As Specified 4 M& For Moorum / Red Bajri Filling In Floors Or Pavings, Laid In Layers Not Exceeding150mm Thick, Spread, Levelled And Rammed Includingwatering As Required Complete All As Specified 5 Returning, Filling In Soil Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exceeding 25 Cm. 6 Removing Excavated Material ( Soil ) Not Exceeding50m And Depositing Where Directed At A Level Not Exceeding 1.5 M Above The Starting Point 7 M&L For Plaincement Concrete 1:4:8Type D2using 40Mm Graded Stone Aggregateas In Foundation, Filling And Mass Concrete And Sub Base Of Floor Complete All As Specified 8 M&L Forrccm-25 Grade Concrete ( Using20mm Graded Aggregate ) As In Foundation, Footings, Plinth Protection And Similar Rcc Works All As Specified. Note : Reinforcement Shall Be Measured And Paid Separately Under Relevant Item. 9 M&L Forrccm-25 Grade Concrete ( Using20mm Graded Aggregate ) As In Slabs Supported On Walls, , Chajjas, Landings, Balconies, Canopies, Deck Slabs And In Shelves And The Like Complete All As Specified .Note : Reinforcementshall Be Measured And Paid Separately Under Relevant Item 10 M&L Forrccm-25 Grade Concrete ( Using20mm Graded Aggregate ) As In Roof Beam, Plinth Beam, Roof Beam, Lintel Beams And Columns Complete All As Specified.Note : Reinforcementshall Be Measured And Paid Separately Under Relevant Item 11 M&L Forrccm-25 Grade Concrete ( Using20mm Graded Aggregate ) As In Chajjas Complete All As Specified .Note : Reinforcementshall Be Measured And Paid Separately Under Relevant Item 12 M&L Forrccm-25 Grade Concrete ( Using20mm Graded Aggregate ) As Incolumns, Footing, Pillars, Piers, Posts And Struts Complete All As Specified .Note : Reinforcementshall Be Measured And Paid Separately Under Relevant Item 13 M&L For Mild Steel Tmt Bars 8Mm Dia And Over, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Footing, Roof Beam, Plinth Beam, Slab, Chajjas And Similar Work Hooking Ends And Binding With And Including Mild Steel Wire ( Annealed ) Not Less Than 0.9Mm Dia Or Securing With Clips Complete All As Specified 14 All As Peritem No 12Above But 5 Mm Dia And Over Up To And Including 10 Mmdia As In Stirrups 15 M&L For Formwork To Sides Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits ( If Any ) Of Foundation And Plinth Beams; And Similar Work; Vertical Or To Batter Etc.Complete Rough Finished Surface Of Concrete 16 M&L For Formwork To Sides Of Pillars, Posts, Struts, Piers, Columns And Stanchions Etc Complete Rough Finished Surface Of Concrete 17 M&L For Formwork To Soffits Of Suspended Slabs Such As Roof Slabs, Floor Slabs, Landings And Similar Work; Not Exceeding 200Mm Thick ( Horizontal Or Sloping ) Complete Rough Finished Surface Of Concrete 18 M&L For Formwork To Sides And Soffits Of Floor Or Roof Beams, Beam Haunchings, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Supports, Overhangs, Etc. Also Splays Between Floors And Beams, Etc.Complete Rough Finished Surface Of Concrete 19 M&L For Formwork To Edges Of Concrete Flats, Treads, Breaks In Floors, Window Cills, Concrete Railings, Openings In Concrete Walls, Floor And Roofs N Exc 20 Cm Wide And Sides Of Rcc / Pcc Bands In Walls, Horizontal Or Sloping And Similar Work Exc 10Cm But N Exc 20Cm Wide Complete Rough Finished Surface Of Concrete 20 M&L For Brickwork With Modular Fly Ash Bricks, Straight Or Curved On Plan Exc 6M Mean Radius, Built In Cm ( 1:4 ) Complete All As Specified 21 M&L For 15 Mm Thick Rendering In Cm 1:6 Onbrick Work Or Concrete Surfaces, Surfacesfinished Even And Smooth Without Using Extra Cement Complete All As Specified 22 M&L For 15 Mm Thick Rendering In Cm 1:4 Onbrick Work Or Concrete Surfaces, Surfacesfinished Even And Smooth Without Using Extra Cement Complete All As Specified 23 M&L For 5 Mm Thick Rendering In Cm 1:3 Onbrick Work Or Concrete Surfaces, Surfacesfinished Even And Smooth Without Using Extra Cement Complete All As Specified 24 M&L For 75 Mm Thick , Pcc 1:3:6 Type C2 ( Using 20Mm Graded Stone Aggregate ) As In Plinth Protection Finished The Surfaces Of Concrete Topping Even And Fair ( Without Using Extra Cement ) Including Making Joint At Every 3 Minterval And At Corner And Filled With Mixture Of Bitumen And Sandlaid In Alternate Bays Complete All As Specified 25 M&L For Preparation Of Newly Plastered Surfaces Of Wall And Applying Two Coat Ofsuperiorquality Exterior Weatherproof Water Base Emulsion Paint Over A Coat Of Primer Of Same Make On Wall Completeall As Specified And Directed. Note :- ( A ) Each Stage I.E Preparation Of Surfaces, Application Of Primer, Application Of First Coat.Application Of Second Coat Shallbe Approved By Engineer-In-Charge ( B ) Written Warranty For Four Years Shall Befurnished By Contractor 26 M&L For Preparation Of New Plastered Surfaces Of Walls And Applying Two Coats Of Oil Bound Distemper Over A Coat Of Alkali Resistance Primer Complete All As Specified 27 M&L For Preparation Of New Plastered Surfaces Of Walls And Applying Three Coats Of White Wash On Ceiling Surface Complete Allas Specified 28 M&L For Machine Cut Kota Stone Slab Flooring 20 Mm Thick ( + 2Mm ) Of Size58cm X 58Cm ( Or Nearest Size As Available In The Market ) Laid Over And Including 25 Mm Thick Pcc 1:2:4 Type B1 Using 20Mm Graded Stone Aggregate And 15Mm Thick Screed Bedin Cement Mortar 1:4 And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab, Including Rubbing And Mirror Polishingfinishcomplete All As Specified 29 S&Fpre Painted Steel Sliding Window 3-Track, 2 Glass Panel And 1 Mesh Panel Sliding Window Fabricated From Roll Formed Sections Made Of Galvanized Steel Colour Coated / Powder Coated ( Base Steel As Per Is 513 ‘D’ Quality, Galvanized As Per Is 277 With Zinc Of 120 Gm / Sq.Mtr ) With Total Coated Thickness Of 0.58Mm. Primer Coat With Epoxy Primer Of 5-7 Microns Thick, Finish Painted With A Polyester Paint Of 12-16 Microns Thick And Back Coated With Alkyd Backer Of 5-7 Microns Or Powder Coated With Pure Polyester Powder Up To 50-60 Microns Thick. Section For External Frame Should Be Of 107X44mm, Section For Shutter Should Be Of 35X49mm. Section Of Mesh Should Be Of 35 X 49 Mm.The Windows Should Be Paneled With 5Mm Thick Plain Clear Glass. Corner Bracket For Internal And External Frame Made Of Glass Filled Nylon. Gaskets Are To Be Made Of Ethyl Propylene Diamine Monomer ( Epdm ) .The Sections Are To Be Cut To Length, Joined And Assembled By Means Of Corner Bracket. The Above Frames Should Be Fixed To The Concrete / Masonry Walls By Means Of Self Expandingscrewscomplete All As Specified And Directed . 30 S&Fair Tight Windows Top Hung Type Made With Galvanised Steel Colour Coated / Powder Coated ( Base Steel As Per Is 513 Of “D Quality, Galvanized As Per Is 277 With Zinc Of 120 Grams / Sqm ) With Total Coating Thickness Of 0.58 Mm, Coated Sections Should Be With Epoxy Primer Of 5-7 Microns Thick, Finish Painted With A Polyester Paint Of 12-16 Microns Thick And Back Coated With Alkyd Backer 5-7 Microns Thick Or Powder Coated With Pure Polyester Powder Up To 50-60 Microns Thick, Outer Frame Section 46X52x0.58 Mm, Shutter Section 46X46x0.58Mm, Mullion Section 46X70x0.58Mm, Beading Section 18X25x0.58 Mm, Windows Panelled With 5Mm Thick Plain Clear Glasswith Epdm ( Ethyl Propylene Diamine Monomer ) Gasket And The Sections Cut To Length Mitre Joined With Corner Bracket Centre Mullions Fixed Using Mullion Cap And With Handle Made Of High Grade Aluminium Powder Coating And Nylon Receiver, Corner Brackets Made Of Crca ( Cold Rolled Close Annealed ) With Zinc Phosphate, Mullion Caps Made Of Glass Filled Nylon, Frames Fixed To The Concrete / Masonry Wall By Means Of Self-Expanding Screws Complete All As Specified And Directed 31 M&L For Glazed Ceramic Coloured Tile Of Size 450Mm X 300 Mmx6 To 7Mm Thick As In Dados Or Skirting Over And Including Rendering 10Mm Thick In Cm ( 1:4 ) , Jointed In Neat Grey Cement Slurry And Pointed Incolour Cement To Match Colour Oftile All Specified. 32 M&L For Non Skid Ceramic Coloured Tiles7 To 8 Mm Thick ( Square / Rectangular ) Area Of Each Tile Exceeding 0.06 Sqm But Not Exceeding 0.11 Sqm, Over Andincluding 20Mm Thick Screed Bed In Cm ( 1:6 ) Asin Floors Etc Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement To Match Colour Of Tiles Allas Specified 33 S&Fwash Hand Basins, Vitreous China, Of Size 550X400mm ( Flat Back, Or Angle Back Type ) Including Cutting For And Pinning In Ends Of Brackets Or Errecting Stand Exclusive Of Fixing Of Supply And Waste Pipe Etc Complete All As Specified 34 S&Fvitreous China Squatting Pan, ‘Orissa’ Pattern Of Size 580 X 440 Mm White, With Integral Foot Rests ( Excluding Flushing Cistern And Flush Pipe ) Complete All As Specified. 35 S&F Pvc Valveless, Syphonic Action Type Flushing Cistern 10 Litres Capacity , Low / High Level White With Inlet Ball Valve Float And Handle Including Brackets Complete All As Specified 36 S&Fvitreous China Urinal Half Stall Type 350X390x600 Mm ( Minimum ) Height With Including Providing & Fixing Of Plugs Bedding Against Wall In Cement Mortar 1:2 Pointing Around Urinal Back In Cement Mortar Complete All As Specified. 37 S&F Cp Brass Urinal Spreader Suitable For 15 Mm Dia Pipe. 38 S&F Urinal Partition Of Size 900X450 Mm With Hpl Board 10 To 12Mmthickfixed With Brackets Complete All As Specified 39 S&F Pvc Waste Pipe40mm / 32Mm Bore Suitable For Wash Hand Basin / Sink / Urinal Outlet Complete All As Specified & Directed. 40 S&F 75 Mm Bore Pvcfloor Traps Plain With Grating And 300 Mm Long Out Let Including Necessary Jointing 41 S&F Pvc Pipe 40 Mm Dia, In Any Length And In Any Position Such As Walls, Ceiling Or Laid In Floor Or Trenches Etc. Complete All As Specified 42 S&F Pvc Bend For 40Mm Dia Pvc Pipe 43 S&Fpvc Bends 75Mm Bore, Any Radius 44 S&Fpvc ( Swr ) Pipe 110 Mm Dia Single Socketed In Any Length With Rubber Ring Joints Laid In Trenches Or In Floors Complete All As Specified 45 S&Fpvc ( Swr ) Pipe 75 Mm Dia Single Socketed In Any Length With Rubber Ring Joints Laid In Trenches Or In Floors Complete All As Specified 46 S&F Bib Taps ( Push Type ) Cast Copper Alloychromium Plated With Crutch Or Butterfly Handle, Screwed Down, Screwed For Iron Pipe Of 15Mm Borecomplete All As Specified 47 S&F Fancy Type Chromium Plated Two Way Bib Cock Of 15Mm Bore, Screwed For Iron Pipe Or Brass Ferrule Etc Complete All As Specified . 48 S&F Pillar Taps ( Swan Neck ) , Fancy Typecast Copper Alloy With Capstan Heads, Chromium Plated, Screwed Down, High Pressure With Or Without Lettered “Hot” Or “Cold” With Long Screwed Shanks And Fly Nut Screwed For Iron Pipe Of 15Mm Bore, Complete All As Specified 49 S&F Stop / Angle Cock Cast Copper Alloy High Pressure, Angle Valve Type, Chromium Plated Suitable For 15Mm Bore Steel Pipecomplete All As Specified 50 S&Fhealth Faucet With Stainless Steel Flexible Pipe Of 1.00 To 1.50 Metrelength Including Holdercomplete All As Specified 51 S&F Pvc Connection Of 450Mm Longsuitable For 15Mm Dia Iron Pipe Including Ptmt Nuts Complete All As Specified 52 S&F 15Mm Bore, Tubes Medium Grade, Galvanized With All Fittings And Fixed To Walls And Ceiling Or Laid In Floors Including Testing Complete All As Specified 53 All As Per Serial Item No.51 Abovebutfor 20Mm Bore. 54 S&Fgun -Metal, Globe Or Gate Valve 15Mm Dia With Iron Wheel Head , Screwed Both Ends For Iron Pipe And Fixed. 55 S&F 20Mm Boreball Valve Highpressure Of Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipecomplete All As Specified 56 S&F Rotational Moulded Polythylenewater Storage Tank 500 Litres Capacitydouble Layered , Cylindrical , Vertical With Closte Top , Hoisted And Fixed In Position All As Specified In Ssr Part-Icomplete 57 S&F Sheet Glass Shelf Assembly Consisting Of 5.5Mm Thick Sheet Glass Shelf 12Cm Vide With Chromium Plated Bracket Guard And Railing 60Cm Long Complete. 58 S&Fbevelled Edge Mirror Of 5 To 6 Mm Thick Selected Quality Glass Of Size 600 X 450 Mm Mounted On 6Mm Thickac Building Board Or Commercial Plywood Andfixed To Wooden Plug With Chromium Plated Brass Screw And Cup Washers Complete Complete All As Specified 59 S&F Pressed Steel Frame Of Size 105 Mmx60 Mm For Doors With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc., Complete All As Specified 60 S&F Steel Door Including Projecting Type Hinges, Steel Handle, Complete, With Glazing Bars, Dovetailed Or Welded Complete 61 S&F Pvc Door Frame Of Size 50Mm X 47 Mm Made Out Of 5 Mm Prelam Pvc Sheet Reinforced With Ms Square Tube In Opening Of Suitable Size Complete All As Specified 62 S&F Factory Made ( Prelam On Both Sides ) Solid Panel Pvc Door Shutter 30 Mm Thick ( Style ) Consisting Of Frame Made Out Of Ms Tubes For Top And Bottom Rails, Ms Frame Shall Covered With Heat Moulded Prelam Pvc C Channel Having A Pvc Sheet Strip Of 20 Mm Width Stuck Inside With Solvent Cement For Styles And Prelampvc Sheets For Top Rail, Lock Rail And Bottom Rail In Either Side And As Gap Insert For Top Rail And Bottom Rail Pannelling Of Prelam Pvc Sheet To Be Filled In The Ms Welded / Sealed To The Styles And Rails With Suitable Pvc Sheet Beading And Jointed Together Wiht Solvent And Fixing In The Frame At Site As Per Specification And Drawing Complete All As Specified 63 S&F 100Mm Long Butt Hinges Medium Weight Cold Rolled Mild Steel Complete All As Specified 64 S&Faluminium Anodized Barrel Tower Bolts Of Length 150Mm Of Extruded Section 65 S&Fmild Steel Pressed Handle Of Size 150 Mm, Oval Type, Stove Enamelled Black Complete All As Specified 66 M&L For Preparation Of Surfaces For Applying Bituminous Primer ( Conforming To Is-3384-1965 ) @ 0.40 Kg / Sqm Complete. 67 M&L For Applying A Tack Coat Of Industrial Bitumen Grade Of 85 / 25 At The Rate Of 1.2 Kg Per Sqm Including Cleaning Surfaces Complete All As Specified 68 M&Lfor App Based Polymeric Membrane Minimum Weighing 3Kg / Sqm And Minimum 3Mm Thick Reinforced With Polyster Non Woven Fabric ( Weightnot Less Than 150 Gm / Sqm ) Laid On Primed Surface By Forced Application Complete All As Specified 69 M&L For Applying Two Coats Of Bitumen Based Aluminium Painting @ 0.15 Kg / Sqm Each Coat On Water Proofing Treatment Includingpreparation Of Surface As On Non Assesible Area Complete All As Specified 70 E / M Portion: 71 M&L For Point Wiring With Fr Lshpvc Insulated Pvc Unsheathed Electriccable 1100V Grade Single Core Having Multi Stranded Copper Conductor Of Size 1.5 Sqmm Nominal Cross Sectional Area Drawn In & Including Non Metallic Rigid Pvc Conduit Isi Marked Medium Grade Not Less Than 20Mm Dia With All Conduit Accessories In Concealed Wiring System By Cutting Of Wall And Making Good And Matching Disturbed Surface Of Wall With Existing Surface Of Wall ( Cutting Except On Ceiling For Fan Point Only, On Ceiling Instead Of Pvc Conduit Surface Casing Caping Shallbe Used ) & 1.5 Sqmm Green Fr Lspvc Insulated Unsheathed Copper Conductor As Earth Wire Connected To Commonearth Dolly By Providing Lugs Including Galvanised Boxes And Bakelite Sheetfor Mounting Switches, Sockets, Fan Regulators Etc For One Light Point / Fan Point Controlled By One Switch. Make Of Pvc Conduit / Casing Caping:- Plaza / Finolex / Polycab / Kalinga / Jindal / Asian. 72 One Light Point Controlled By One Switch 73 One Exhaust Fan Point Controlled By One Switch 74 One 5 Amps Socket Out Let Point Controlled By One Switch On Same Board With Other Switches. 75 One 5 Amps Socket Out Let Point On Independent Board Controlled By One Switch. 76 All As Per Item No 69 Here In Before But Using Pvc Insulated Unsheathed 2.5 Sqmm Cross Sectional Area Cable For Phase / Neutral & For Earth 2.5 Sqmm Green Pvc Insulated Cable For 15 Amps Socket Point On Independent Board Controlled By One Switch. 77 S&F Switchpiano Flush Button Single Pole One Way 6 Amp 240 Volt 78 S&F Socket Outlet Flush Type 5 Pin, 6 Amps, 230 Volts 79 S&F Switch Piano Flush Button Single Pole One Way 15 Amp 240 Volt 80 S&F Socket Outlet Flush Type Multipurpose 2 In 1, 3 Pin 5 And 15 Amp, 230 Volts 81 S&F Ceiling Rose Surface Bakelitethree Terminal 82 S&F Electronic Fan Regulator Step Type 83 S&F Integrated Led Tube Light Fitting 1X18 / 20 Watt, 6000Kcomplete Fitting With All Accessories Duly Connection With Three Core Flexible Coppercable Duly Fixed On Two Nos Of Pvc Square Boxescomplete All As Specifiedmake:- Havells Cat No. Lhexblp7pn1w018 , Bajaj Cat Pt No. Bclsb 18Whor Otherequivalent In Wipro 84 S&F Integrated Led Tube Light Fitting 1X9 / 10 Watt, 6000Kcomplete Fitting With All Accessoriesduly Connection With Three Core Flexible Coppercable Duly Fixed On Two Nos Of Pvc Square Boxcomplete All As Specified And Directed. Make:- Havells Cat No. Lhexblp7in1w009 Bajaj Cat Pt No. Bclsb 10 Wh Or Other Equivalent In Wipro 85 S&F Led Street Light Fittings 1X30 Watt, 5700K Complete Fitting Having Pressure Dia Cast Aluminium Housing With Heat Resistant Toughened Glass & Ip 65 Protection Fixed On And Including Sufficient Length And Appropriate Size Gi Bracket With All Accessories Duly Connection With Three Core Flexible Copper Cable Complete All As Specified Make:- Havells Cat No.Lhexayp7pn6k030 Crompton Cat No. Lsto-25-Cdl, Bajaj Cat No. Bclst 25W Led Iv2 86 S&F Double Door Tpn Dbs Four Wayof Powder Coated DbS Suitable For McbS Fitted With Bus Bar, Neutral Link, Earth Bar And Din Ral Complete All As Specified Make:- Hpl / L&T / Hpl / Havells 87 S&F Double Door Spn Dbs 4 Wayof Powder Coated DbS Suitable For McbS Fitted With Bus Bar, Neutral Link, Earth Bar And Din Ral Complete All As Specified 88 S&F Double Door Spn Dbs 8 Wayof Powder Coated DbS Suitable For McbS Fitted With Bus Bar, Neutral Link, Earth Bar And Din Ral Complete All As Specified 89 S&F Mcb Tpn 40 To 100 Amps415v 10Ka C Curve Fixedindb Complete 90 S&F Mcb Spn 6 To 32 Amps10 Ka, B Series Including Connection With Suitable Size Aluminium / Copper Lugs Complete All As Specified 91 S&F Mcb Sp 240 Volts 6 To 32 Amps, 10 Ka Breaking Capacity, B Series Including Connection With Suitable Size Aluminium / Copper Lugs Complete All As Specified 92 S&F Ceiling Fan Complete With Blades, Down Rods, Electronic Regulator And Accessories, 230 V, 1200 Mm Sweep. Minimumair Delivery 210 Cfm With Service Value 6.00 Bee. 5Star Rated With Brushless Direct Current Motor ( Bldc ) . Complete All As Specified Make: Havells / Bajaj / Crompton. 93 M&L For Sub Main Wiringwith Two Runs Of Single Core Frlspvc Insulated Unsheathed Cable 1100 Volts Grade, 4 Sqmm Size With Multistranded Copper Conductor, Drawn In And Including Non Metallic Rigid Pvc Conduit Of Not Less Than 25 Mm Dia Concealed In Wall By Cutting Chases Of Wall And Making Good The Disturbed Surface, Including Frls Pvc Insulated Unsheathed 4.0 Sqmm Cable With Multistranded Copper Conductor Green Pvc Insulated As Continuous Earth Conductor Cable Connected To Earth Dolly From Main Distribution Board Complete All As Specified . 94 S&F Exhaust Fan 300Mm Sweep, Ac Single Phase 230 Volts, Metallic Type, Complete With Louverincluding Electric Connection With Suitable Size Copper Conductor Cable, Clamps, Nuts, Bolts Etc Including Making Hole Of Appropriate Size In The Existing Brick Wall And Making Good The Disturbed Wall Tomatch With The Existing Surface Of Wall Complete All As Specified And Directed By Engineer-In-Charge. Make : Havells Model:Ventil Air-Dx White Or Otherequivalent In / Bajaj / Crompton. 95 M&L For Earthing Complete With Galvanized Steel Earth Plate Electrode 60Cm X 60Cmx 6.3 Mm Thick Buried Directly In Ground ( Earth Pit Not Less Than 2.25 Meter Deep Below Ground Level ) With The Top Edge Of The Earth Plate Not Less Than 1.5 Meter Below Normal Ground Level Connected To Galvanized Earth Lead Wire 4Mm Dia By Means Of Bolts, Nuts, Check Nuts And Washer Of Galvanized Iron Or Of Steel All As Shown In Electrical Plate No.5 Of Messsr Parts-I And Including Excavation & Earth Work In Any Type Of Soil , Disposal Of Soil , Providing Alternate Layers Of Charcoal And Common Salt, Construction Of Pcc Earth Chamber In Mix 1:3:6 Type C1 , 40 Mm Thick Rcc 1:2:4 Type B1cover Reinforced With 8Mm Dia Ms Bars Both Ways With Lift Hook Made Out Of 8 Mm Dia Bar, Watering Arrangement With Funnel And Wiremesh And Watering Pipe Of 20Mm Dia Gi Light Grade And 15Mm Dia Light Grade Pipe For Earth Lead Protection And Testing On Completionall As Specified And Directed. 96 Excavation In Trenche Not Exceeding 1.5M Wide Andnot Exceeding 1.5M Indepthgetting Out In Hard / Dense Soil For Laying Cable / Errecting Poles , Stay Assembly All As Specified. 97 Returning And Filling In Soil Including Spreading Levelling Watering And Well Ramming In Layers Not Exceeding 25Cm All As Specified. 98 Removing Excavated Soil To A Distance Not Exceeding 50M And Depositing Where Directed At A Level Not Exceeding 1.5M Above The Starting Point. 99 S&F Medium Grade Galvanised Iron Tube With All Fittings And Fixed Completeon Walls And Ceilings Or Laid On Floors Of 50 Mm Bore 100 S&F Medium Grade Galvanised Iron Tube With All Fittings And Fixed Completeon Walls And Ceilings Or Laid On Floors Of 25 Mm Bore 101 S&F Ballvalves, High Pressure Of Ptmt With Epoxy Coated Aluminium Rod & High Density Plastic Ballscrewed For Iron Pipe And Fixed Suitable For 25Mm Bore Dia Of Pipe ( Minimum Weight - 455 Gms ) 102 Supply, Lowering, Install, Testing And Commissioning Submersible Pump Set Of Capacity 10 Hp Slip Start Synchronous Run Motor ( S4rm / Bldc Type ) , Pump 20 Stage, 143 Metrewith Ss 304 Impeller, Shaft-Duplex Steel, Casing Ss 304, Pump Motor Ss 304 Suitable For 6 Bore Well Includingsuitable Control Panel For Pumpset , Smart Vfd Driven With Phase Reversal Protection, Dry Run Protection, Over & Under Voltage Protection, Fault Indication Alarm, Energy Monitoring And Remote Monitoring System For Access Through Mobile Or Computer By Manufacturer Application For 5 Year Of Period By Providing Sim Card. Including Provision Ofms Cover For Borewell And Suitable Clamp To Hold The Submersible Pumpset Including Provision Of Suitable Size Rope Of Required Length Complete All As Specified And Directed By Engineer-In-Charge. 103 S&Fpvc Insulated Sheathed 1100 Volt Grade Copper Conductor Cable Flat Multi Stranded For Submersible Pumps Of3 Core 6 Sqmm As In Motorsforbore Well All As Specified And Directed

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 31-Aug-2023 Amendment to tender documents Other 11-09-2023
2 11-Sep-2023 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 18-09-2023

Key Value

Document Fees
INR 500 /-
EMD
INR 32100.0 /-
Tender Value
INR 16.03 Lakhs /-

BOQ Items

NAME OF WORK : PROVISIONOF GUARD ROOM WITH TOILET BLOCK ATHFFR AT INF SCHOOL UNDER GE (MIS) MHOW
Sl. No. Item Description
1B/R WORKS:
2Surface dressing not exceeding 15 cm deep in soft/loose soil all as specified .
3Excavationover areas not exceeding1.5 m deep and getting out in soft/loose soil complete all as specified
4M& for Moorum / red bajri filling in floors or pavings, laid in layers not exceeding150mm thick, spread, levelled and rammed includingwatering as required complete all as specified
5Returning, filling in soil including spreading, levelling, watering and well ramming in layers not exceeding 25 cm.
6Removing excavated material (soil) not exceeding50m and depositing where directed at a level not exceeding 1.5 m above the starting point
7M&L for plaincement concrete 1:4:8type D2using 40mm graded stone aggregateas in foundation, filling and mass concrete and sub base of floor complete all as specified
8M&L forRCCM-25 grade concrete (using20mm graded aggregate) as in foundation, footings, plinth protection and similar RCC works all as specified. Note : Reinforcement shall be measured and paid separately under relevant item.
9M&L forRCCM-25 grade concrete (using20mm graded aggregate) as in Slabs supported on walls, ,chajjas, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified .Note : Reinforcementshall be measured and paid separately under relevant item
10M&L forRCCM-25 grade concrete (using20mm graded aggregate) as in roof beam, plinth beam,roof beam, lintel beams and Columns complete all as specified.Note : Reinforcementshall be measured and paid separately under relevant item
11M&L forRCCM-25 grade concrete (using20mm graded aggregate) as in chajjas complete all as specified .Note : Reinforcementshall be measured and paid separately under relevant item
12M&L forRCCM-25 grade concrete (using20mm graded aggregate) as inColumns, footing, pillars, piers, posts and struts complete all as specified .Note : Reinforcementshall be measured and paid separately under relevant item
13M&L for mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, footing, roof beam, plinth beam, slab,chajjas and similar work hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified
14All as peritem no 12above but 5 mm dia and over up to and including 10 mmdia as in stirrups
15M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc.complete rough finished surface of concrete
16M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc complete rough finished surface of concrete
17M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete rough finished surface of concrete
18M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.complete rough finished surface of concrete
19M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete rough finished surface of concrete
20M&L for brickwork with modular fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM(1:4) complete all as specified
21M&L for 15 mm thick rendering in CM 1:6 onbrick work or concrete surfaces, surfacesfinished even and smooth without using extra cement complete all as specified
22M&L for 15 mm thick rendering in CM 1:4 onbrick work or concrete surfaces, surfacesfinished even and smooth without using extra cement complete all as specified
23M&L for 5 mm thick rendering in CM 1:3 onbrick work or concrete surfaces, surfacesfinished even and smooth without using extra cement complete all as specified
24M&L for 75 mm thick ,PCC 1:3:6 type C2 (using 20mm graded stone aggregate) as in plinth protection finished the surfaces of concrete topping even and fair (without using extra cement) including making joint at every 3 minterval and at corner and filled with mixture of bitumen and sandlaid in alternate bays complete all as specified
25M&L for preparation of newly plastered surfaces of wall and applying two coat ofsuperiorquality exterior weatherproof water base emulsion paint over a coat of primer of same make on wall completeall as specified and directed. Note :-(a) Each stage i.e preparation of surfaces, application of primer, application of first coat.application of second coat shallbe approved by Engineer-in-Charge (b) Written Warranty for four years shall befurnished by contractor
26M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistance primer complete all as specified
27M&L for preparation of new plastered surfaces of walls and applying three coats of white wash on ceiling surface complete allas specified
28M&L for Machine cut Kota stone slab flooring 20 mm thick(+ 2mm) of size58cm x 58cm (or nearest size as available in the market) laid over and including 25 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate and 15mm thick screed bedin cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and mirror polishingfinishcomplete all as specified
29S&Fpre painted steel sliding window 3-Track, 2 glass panel and 1 mesh panel sliding window fabricated from Roll formed sections made of galvanized Steel colour coated/powder coated (Base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 GM/Sq.mtr) with total coated thickness of 0.58mm. Primer coat with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. Section for external frame should be of 107x44mm, Section for shutter should be of 35x49mm. Section of mesh should be of 35 x 49 mm.The windows should be paneled with 5mm thick plain clear glass. Corner bracket for internal and external frame made of glass filled nylon. Gaskets are to be made of Ethyl Propylene Diamine Monomer (EPDM).The sections are to be cut to length, joined and assembled by means of corner bracket. The above frames should be fixed to the concrete/masonry walls by means of self expandingscrewscomplete all as specified and directed .
30S&Fair tight windows top hung type made with Galvanised steel colour coated/powder coated(base steel as per IS 513 of “D" quality, galvanized as per IS 277 with zinc of 120 grams/sqm) with total coating thickness of 0.58 mm, coated sections should be with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, outer frame section 46x52x0.58 mm, shutter section 46x46x0.58mm, mullion section 46x70x0.58mm, beading section 18x25x0.58 mm, windows panelled with 5mm thick plain clear glasswith EPDM (Ethyl Propylene Diamine Monomer) gasket and the sections cut to length mitre joined with corner bracket centre mullions fixed using mullion cap and with handle made of high grade aluminium powder coating and nylon receiver, corner brackets made of CRCA (Cold Rolled Close Annealed) with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self-expanding screws complete all as specified and directed
31M&L for glazed ceramic coloured tile of size 450mm x 300 mmx6 to 7mm thick as in dados or skirting over and including rendering 10mm thick in CM (1:4), jointed in neat grey cement slurry and pointed incolour cement to match colour oftile all specified.
32M&L for non skid ceramic coloured tiles7 to 8 mm thick (Square / rectangular ) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,over andincluding 20mm thick screed bed in CM (1:6) asin floors etc set and jointed in neat cement slurry and pointed in coloured cement to match colour of tiles allas specified
33S&Fwash hand basins, vitreous china,of size 550x400mm (flat back, or angle back type)including cutting for and pinning in ends of brackets or errecting stand exclusive of fixing of supply and waste pipe etc complete all as specified
34S&Fvitreous China squatting pan, ‘Orissa’ pattern of size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified.
35S&F PVC valveless, syphonic action type flushing cistern 10 litres capacity ,low / high level white with inlet ball valve float and handle including brackets complete all as specified
36S&Fvitreous china urinal half stall type 350x390x600 mm (minimum) height with including providing & fixing of plugs bedding against wall in cement mortar 1:2 pointing around urinal back in cement mortar complete all as specified.
37S&F CP brass urinal spreader suitable for 15 mm dia pipe.
38S&F Urinal partition of size 900x450 mm with HPL board 10 to 12mmthickfixed with brackets complete all as specified
39S&F PVC waste pipe40mm / 32mm bore suitable for wash hand basin /sink / urinal outlet complete all as specified & directed.
40S&F 75 mm bore PVCfloor traps plain with grating and 300 mm long out let including necessary jointing
41S&F PVC pipe 40 mm dia,in any length and in any position such as walls, ceiling or laid in floor or trenches etc. complete all as specified
42S&F PVC bend for 40mm dia PVC pipe
43S&FPVC bends 75mm bore, any radius
44S&FPVC (SWR) pipe 110 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified
45S&FPVC (SWR) pipe 75 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified
46S&F Bib taps (push type) cast copper alloychromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm borecomplete all as specified
47S&F fancy type chromium plated two way bib cock of 15mm bore,screwed for iron pipe or brass ferrule etc complete all as specified .
48S&F pillar taps (swan neck), fancy typecast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore,complete all as specified
49S&F stop / angle cock cast copper alloy high pressure,angle valve type, chromium plated suitable for 15mm bore steel pipecomplete all as specified
50S&Fhealth faucet with stainless steel flexible pipe of 1.00 to 1.50 metrelength including holdercomplete all as specified
51S&F PVC connection of 450mm longsuitable for 15mm dia iron pipe including PTMT nuts complete all as specified
52S&F 15mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified
53All as per serial item No.51 abovebutfor 20mm bore.
54S&FGun -metal,globe or gate valve 15mm dia with iron wheel head ,screwed both ends for iron pipe and fixed.
55S&F 20mm boreball valve highpressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipecomplete all as specified
56S&F rotational moulded polythylenewater storage tank 500 Litres capacitydouble layered ,cylindrical ,vertical with closte top , hoisted and fixed in position all as specified in SSR Part-Icomplete
57S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm vide with chromium plated bracket guard and railing 60cm long complete.
58S&FBevelled edge mirror of 5 to 6 mm thick selected quality glass of size 600 x 450 mm mounted on 6mm thickAC building board or commercial plywood andfixed to wooden plug with Chromium Plated brass screw and cup washers complete complete all as specified
59S&F Pressed steel frame of size 105 mmx60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified
60S&F Steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded complete
61S&F PVC door frame of size 50mm x 47 mm made out of 5 mm prelam PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified
62S&F Factory made (Prelam on both sides) solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall covered with heat moulded prelam PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and prelamPVC sheets for top rail, lock rail and bottom rail in either side and as gap insert for top rail and bottom rail pannelling of prelam PVC sheet to be filled in the MS welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together wiht solvent and fixing in the frame at site as per specification and drawing complete all as specified
63S&F 100mm long butt hinges medium weight cold rolled mild steel complete all as specified
64S&FAluminium anodized barrel tower bolts of length 150mm of extruded section
65S&FMild steel pressed handle of size 150 mm, oval type, stove enamelled black complete all as specified
66M&L for preparation of surfaces for applying bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm complete.
67M&L for applying a tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces complete all as specified
68M&Lfor APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (weightnot less than 150 gm/sqm)laid on primed surface by forced application complete all as specified
69M&L for applying two coats of bitumen based aluminium painting @ 0.15 Kg / sqm each coat on water proofing treatment includingpreparation of surface as on non assesible area complete all as specified
70E/M PORTION:
71M&L for Point wiring with FR LSHPVC insulated PVC unsheathed electriccable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area drawn in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good and matching disturbed surface of wall with existing surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit surface casing caping shallbe used) & 1.5 sqmm green FR LSPVC insulated unsheathed copper conductor as earth wire connected to commonearth dolly by providing lugs including galvanised boxes and bakelite sheetfor mounting switches, sockets, fan regulators etc for One light point/fan point controlled by one switch. Make of PVC conduit/Casing Caping:- Plaza/Finolex/Polycab/Kalinga/Jindal/Asian.
72One light point controlled by one switch
73One Exhaust fan point controlled by one switch
74One 5 Amps socket out let point controlled by one switch on same board with other switches.
75One 5 Amps socket out let point on independent board controlled by one switch.
76All as per item no 69 here in before but using PVC insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 2.5 Sqmm green PVC insulated cable for 15 amps socket point on independent board controlled by one switch.
77S&F switchpiano flush button single pole one way 6 Amp 240 volt
78S&F socket outlet flush type 5 pin, 6 amps, 230 volts
79S&F switch piano flush button single pole one way 15 Amp 240 volt
80S&F socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts
81S&F ceiling rose surface bakelitethree terminal
82S&F Electronic Fan regulator step type
83S&F integrated LED tube light fitting 1x18/20 Watt, 6000Kcomplete fitting with all accessories duly connection with three core flexible coppercable duly fixed on two nos of PVC square boxescomplete all as specifiedMake:- Havells Cat No. LHEXBLP7PN1W018 , Bajaj cat Pt No. BCLSB 18WHor otherequivalent in Wipro
84S&F integrated LED tube light fitting 1x9/10 Watt, 6000Kcomplete fitting with all accessoriesduly connection with three core flexible coppercable duly fixed on two nos of PVC square boxcomplete all as specified and directed. Make:- Havells Cat No. LHEXBLP7IN1W009 Bajaj Cat Pt No. BCLSB 10 WH or other equivalent in Wipro
85S&F LED street light fittings 1x30 Watt, 5700K complete fitting having pressure dia cast aluminium housing with heat resistant toughened glass & IP 65 protection fixed on and including sufficient length and appropriate size GI bracket with all accessories duly connection with three core flexible copper cable complete all as specified Make:- Havells Cat No.LHEXAYP7PN6K030 Crompton Cat No. LSTO-25-CDL, Bajaj Cat No. BCLST 25W LED IV2
86S&F double door TPN DBs four wayof powder coated DB"s suitable for MCB"s fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified Make:- HPL/L&T/HPL/Havells
87S&F double door SPN DBs 4 wayof powder coated DB"s suitable for MCB"s fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified
88S&F double door SPN DBs 8 wayof powder coated DB"s suitable for MCB"s fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified
89S&F MCB TPN 40 To 100 Amps415V 10KA "C" curve fixedinDB complete
90S&F MCB SPN 6 to 32 Amps10 KA, "B" series including connection with suitable size aluminium / copper lugs complete all as specified
91S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity,"B" series including connection with suitable size aluminium / copper lugs complete all as specified
92S&F ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. minimumair delivery 210 CFM with service value 6.00 BEE. 5star rated with brushless direct current motor (BLDC). Complete all as specified Make: Havells/Bajaj/ Crompton.
93M&L for Sub main wiringwith two runs of single core FRLSPVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit of not less than 25 mm dia concealed in wall by cutting chases of wall and making good the disturbed surface, including FRLS PVC insulated unsheathed 4.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly from main distribution board complete all as specified .
94S&F Exhaust fan 300mm sweep, AC single phase 230 Volts,metallic type,complete with louverincluding electric connection with suitable size copper conductor cable, clamps, nuts, bolts etc including making hole of appropriate size in the existing brick wall and making good the disturbed wall tomatch with the existing surface of wall complete all as specified and directed by Engineer-in-Charge. Make : Havells Model:Ventil Air-DX white or otherequivalent in /Bajaj/Crompton.
95M&L for Earthing complete with galvanized steel earth plate electrode 60cm x 60cmx 6.3 mm thick buried directly in ground ( earth pit not less than 2.25 meter deep below ground level) with the top edge of the earth plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4mm dia by means of bolts, nuts, check nuts and washer of galvanized iron or of steel all as shown in electrical plate No.5 of MESSSR parts-I and including excavation & earth work in any type of soil , disposal of soil , providing alternate layers of charcoal and common salt, construction of PCC earth chamber in mix 1:3:6 type C1 , 40 mm thick RCC 1:2:4 type B1cover reinforced with 8mm dia MS bars both ways with lift hook made out of 8 mm dia bar, watering arrangement with funnel and wiremesh and watering pipe of 20mm dia GI light grade and 15mm dia light grade pipe for earth lead protection and testing on completionall as specified and directed.
96Excavation in trenche not exceeding 1.5m wide andnot exceeding 1.5m indepthgetting out in hard / dense soil for laying cable / errecting poles , stay assembly all as specified.
97Returning and filling in soil including spreading levelling watering and well ramming in layers not exceeding 25cm all as specified.
98Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point.
99S&F "Medium grade" galvanised iron tube with all fittings and fixed completeon walls and ceilings or laid on floors of 50 mm bore
100S&F "Medium grade" galvanised iron tube with all fittings and fixed completeon walls and ceilings or laid on floors of 25 mm bore
101S&F Ballvalves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ballscrewed for iron pipe and fixed suitable for 25mm bore dia of pipe ( Minimum weight - 455 gms)
102Supply, lowering, install, testing and commissioning submersible pump set of capacity 10 HP slip start synchronous run motor (S4RM/BLDC type), pump 20 stage,143 metrewith SS 304 impeller, shaft-duplex steel, Casing SS 304, Pump motor SS 304 suitable for 6" bore well includingsuitable control panel for pumpset , smart VFD driven with Phase Reversal Protection, Dry Run Protection, Over & under voltage protection, Fault indication alarm, energy monitoring and remote monitoring system for access through mobile or computer by manufacturer application for 5 year of period by providing sim card. including provision ofMS cover for borewell and Suitable clamp to hold the submersible pumpset including provision of suitable size rope of required length complete all as specified and directed by Engineer-in-charge.
103S&FPVC insulated sheathed 1100 volt grade copper conductor Cable flat multi stranded for submersible pumps of3 core 6 sqmm as in motorsforbore well all as specified and directed
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail