Irrigation And Public Health Department has published Tender For Construction Of Water Treatment Plant 0.20 Mld Capacity/Filtration And Balancing Unit Near Swimming Pool Gasota In Tehsil And Distt. Hamirpur. Submission Date for this Tender is 29-08-2023. Water Treatment Plant Tenders in hamirpur Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 26-Aug-2023 | Corrigendum | Date | 29-08-2023 |
| Sl. No. | Item Description |
| 1 | Excavation in foundation , trecnches etc., in all kinds of soil suchas pickwork, jumper work blasting work,kankar moorum,singles including decomposed soft and hard rock,including chiselling wedging clearance of bushes etc.including shoring, dewatering etc. in all leads and lifts stacking the excavated soil not more than 3 meters clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth and sides of foundation etc. consolidating each deposited layers by remming and watering and then disposing of all surplus earth within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge of the site of work.(PJ) |
| 2 | Excavation in earth work and disposal of all excavated earth upto a lead of 20 metres and lift upto 1.50 metres, disposed earth to be levelled and neatly dressed: (PJ Work 50-50) All kinds of soil (PJ Work 50-50) |
| 3 | Providing and laying cement concrete 1:3:6(1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work in:Foundation and plinth |
| 4 | Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in: |
| 5 | Foundation, footings basis of columns etc. and mass concrete. |
| 6 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like. (Floors etc.upto 200mm. In thickness) |
| 7 | Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like. |
| 8 | Beams, cantilever, girders and lintels. ( Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 Mtr. In depth in all heights from floor. |
| 9 | Edges of slabs and breaks in floors and walls: (Under 20 cm. wide.) |
| 10 | Providing and laying cement concrete 1:1.5:3 (1cement :1.5 sand :3 graded stone aggregate 20mm. nominal size) and curing complete excluding cost of form work and reinforcement for feinforced concrete work in: |
| 11 | Foundation footings bases of columns and thelike and mass concrete. |
| 12 | Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor two level. |
| 13 | Walls including attached buttresses, pilasters and their caps and bases string courses etc. upto floor two level. |
| 14 | Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level.: |
| 15 | Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position & applying a priming coat of red lead paint:In gratings framed guard bars,ladders,railling,brackets and similar works. |
| 16 | Providing Laying jointing and testing in trenches (to level or grade) of GMSpipes (bevelled edge flanged pipes having MS flanges@ 100% of toal length) of below mentioned diametre conforming to IS 1239-2001 (Latest upto date amendments)as specified, suitable to withstand required hydraulic test pressure including fixing of required numberofbends of all degree & tee etc.complete in all respects . The laying of pipes shall conform to IS 5822-1994 as well asCPHEEO manual and will include all operations such asjointing including flushing, cleaning and hydrauliic testing complete in all respects to the entire satisfation of Enginner in Charge including entire carrirage of materials in all leads and lifts. (Earth work in trenches, welding of flanged joint and butt welding will be measured and paid for separately.) |
| 17 | 100 mm Dia (MC) |
| 18 | Providing & fixing Sluice valve of reputated make having dia & class mentioned below, including welding with the flanges of table mentioned below in three no of welds (Two inner & One Outer) complete in all respect.CI of Class PN 1.0 with FT-5, 100mm Dia |
| 19 | Manufacturing& Fixing MANHOLE COVER of size 60 x 60 cm made of angle iron from size 40x40x5 mm thick covered with MS sheet 2.0 mm thick and welded with angle iron frame 35x35x3 mm thick including finges, handle, holdfast and locking arraingement along with lock and key of standard make including priming two coats with red lead paint and fixing with Cement Concrete 1:1.5:3 (1cement: 1.5 Sand: 3 Aggregate 20mm nominal size) complete in all respects. |
| 20 | Brick work using common burnt clay building bricks in Super-structure above plinth level upto floor two level in Cement Mortar 1:6 (1 Cement : 6 Sand) 2nd Class Bricks |
| 21 | Providing woodwork in frames of doors, windows, clerestory windows and other frames wrought, framed and fixed in position. Sal wood. |
| 22 | Providing 40x3 mm flat iron hold fast 40mm. Long including fixing to frame with 10m diameter bolts nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) |
| 23 | 6mm Cement plaster to ceiling In Cement mortar 1:3 (1 Cement:3 Sand) |
| 24 | 15mm cement plaster in single coat on fair side of brick /concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. |
| 25 | 20mm Cement plaster in single coat on rough side of brick/stone masonry for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:6 (1 Cement:6 Sand) |
| 26 | Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. |
| 27 | Providing and laying Duro stone vetrified tiles (300 x300mmx8mm) in grey/coloured of required shade in skirting risers of steps and dados on 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. |
| 28 | Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows, ncluding black enamelled iron butt hinges with necessary screws. 2nd Class deodar wood. (40mm thick) |
| 29 | Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85g. With wire of dia 0.56mm for doors, windows and clerestorey windows including brightfinished black enamelled iron hingeswith necessary screws. 2nd class deodar wood. ( 40mm thick ) |
| 30 | Providing and fixing M.S. grills of require pattern in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws. Plain grill. |
| 31 | Providing and fixing following mentioned anodized aluminium Fittings anodized colour and shade with bolts and nuts screws etc. complete. |
| 32 | a)Sliding door bolt ( 250x16mm ) |
| 33 | b) Tower bolts (berrel type) 150x10mm |
| 34 | c) Tower bolts (berrel type) 100x10mm |
| 35 | Providing and fixing aluminium handles anodized transparent or dyed to required colour shade with necessary screws etc. complete. |
| 36 | a) 125 mm |
| 37 | b) 75 mm |
| 38 | Providing and fixing brightfinished hard drawn hooks and eyes. |
| 39 | a) 150 mm |
| 40 | Providing and fixing bright finished or/ & black enamelled iron (Helical door spring 150mm) |
| 41 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. |
| 42 | Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer |
| 43 | Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equivalent on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete. |
| 44 | Applying two coats of wood preservative on new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter,sand papering and knotting. |
| 45 | Applying priming coat over new wood and wood based surfaces after andincluding prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matters sand papering and knotting. Readymixed paint brushing wood primer pink |
| 46 | Painting two coats (excluding priming coat)on new wood and wood based surfaces,with readymixed paint,brushing to give an even shade including cleaning of all dirt,dust and other foreign matter sand papering and stopping:--Readymixed paint other then white |
| 47 | Applying priming coat over new steel & other metal surfaces after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete. With ready mixed priming paint brushing red lead,Red-oxide/zinc oxide chrome. |
| 48 | Painting two coats (excluding priming coat)on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt,dust and other foreign matter With readymixed paint other than white. |
| 49 | Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominal size) |
| 50 | Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size will rammed and consolidated and grouted with fine sand including preparation of ground. |
| 51 | Electrical Instruments Wiring for light point / fanpoint /exhaust fan /call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group "C" |
| 52 | Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. |
| 53 | Supplying & Fixing of G.I. modular boxes of following sizes along with modular base and cover platefor modular switches in recess as required:- |
| 54 | 4 modules (140mmx78mmx50mm) |
| 55 | 6 modules (205mmx78mmx50mm) |
| 56 | 8 modules (120mmx135mmx60mm) |
| 57 | Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. |
| 58 | 2 x 1.50 Sq. mm. |
| 59 | 2 x 2.50 Sq. mm. |
| 60 | Wiring for circuit / sub-main with 4x6 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.6 Sq.mm. (4x6+2x6) HRFRLS/PVC insulated single core copper conductor cable for earthing as required. |
| 61 | Supplying and Fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required. |
| 62 | S.P. 5/ 6 Amps one way Modular switch. |
| 63 | 5 pin, 5/ 6 Amps Modular socket outlet. |
| 64 | Supplying and Fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required. |
| 65 | S.P. 15/ 16 Amps one way Modular switch. |
| 66 | 6 pin,15/16 Amps Modular socket outlet. |
| 67 | Supplying and Fixing ceiling rose on the existingjunction box / wooden blockincluding connections etc. as required. |
| 68 | Supplyingand Fixingoffollowingway, singlepoleandneutral sheetsteel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-Double door-12 way |
| 69 | Providing and Fixing TP&N switch disconnector fuse unit cubical type, 415/500 volts with 3 No. HBC/HRC fuses, in sheet steel enclosure including drilling holes on the board, connections, earthing the bodyetc. as required.100 Amp. Category-A |
| 70 | Supplyinganderection of 6amps. to 32 amps. rating, 10 KA breaking capacity, 240volts, "C" curves, miniaturecircuit breaker of following poles in the existing MCB DB complete with connections etc. as required.Single pole & neutral. Cat-B. |
| 71 | Supplying and Fixing 20 Amps, 240 volts, SPN industrial socket outlet, 2-pole & earth, metal enclosed plug top, sheet steel enclosure, suitable to accommodate a 20 Amp SPN-MCB/DP, on surface or in recess, with chained metal cover for the socket outlet, complete with connections, testing and commissioning etc. as required. |
| 72 | Earthing with copperearth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required. |
| 73 | Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required. |
| 74 | Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and Fixing phenolic laminated sheet cover on the fan boxand earthing etc. as required. Ceiling Fan 1400 mm sweep, Category-A |
| 75 | Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required.Exhaust Fan, Light duty, (Domestic) 225 mm sweep |
| 76 | Supplying and Fixing bakelite batten/angle holder including connections etc. as required. |
| 77 | Providing and Fixing of LED Tube Fixture 18 watt (Syska or any other reputed make) complete in all respect in all leads and lifts. |
| 78 | Supplying and fixing of LED24 watt bulk head fitting "Frontier Half frame" complete with all accessoriesincluding making connections, testing etc. as required. (Standard reputed Make ) |
| 79 | Supplying and fixingLED. Lamp 10 watts in the existing batten holder. (Standard reputed Make ) |
| 80 | Providing and fixing filtration unit including all accessories complete in all respect to the entire satisfaction of Engineer in charge. |
| 81 | LACUS SAND FILTER TOP MOUNT WITH MPV -FILTER 900 DIA FLOW RATE 30000/HR |
| 82 | Swimming pool motor pupm with pot stainer |
| 83 | Sand Media -550 Kg For Filter |
| 84 | Piping and fiting |
| 85 | Clorine Feeder Machine |
| 86 | Installation of Filtration system Panel and All the Mechanical, electrical and plumbing |
| 87 | Suction Trolley with self priming pump |
| 88 | Cleaning Kit and Accessories and Chemicals |
| 89 | Control Panel for Filtration system |
| 90 | Transport Charges |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
