Tender For Special Repair To Kulundi To Bandhabahal Road In The District Of Sambalpur For The Year 2023-24.
Tender Value
5.04 Lakhs
Estimated cost
Bid Submission
28 Aug 2023
0 days left
EMD
5041
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kuchinda → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special repair To Kulundi To Bandhabahal Road In The District Of Sambalpur For The Year 2023-24.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area etc. complete as per direction of the Engineer in charge. |
| 2 | Flank dressing to proper camber on both side berms etc. complete including taxes of all materials with all labour T&P required for the work etc. complete in all respects as per specification and direction of the Engineer-in-charge. |
| 3 | Earth work in all kinds of soilwith 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and compaction with PRR including hire and running charges of PRR etc. complete as per specification and direction of the Engineer-in-charge. |
| 4 | Maintenance of Hume pipe Culvert by way ofClearing, Cleaning erosion repair, repairs to cracks, parapet wall and protection work as per drawing and technical specification Clause 1908 . |
| 5 | White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scrapping etc., as per MORD technical specifications Clause 1915. |
| 6 | Providing and laying Moorum on road berms including cost conveyance of all materials & labour chrges etc complete for finished item of work and as per the direction of Engineer- in charge. |
| 7 | Reinforced cement concrete M15 grade kilometer stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical specification Clause 1703 of MORD. |
| 8 | Km Stone |
| 9 | 200m stone |
| 10 | Reinforced cement concrete M15 grade Guard stone/local stone of standard design as per IRC:25 fixedposition including finishing as per drawing and Technical specification Clauseof MORDetc.complete as per direction of the Engineer-in-charge. |
| 11 | Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges.The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level.The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube.All M.S. will be stove enameled on both sides.Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 of MoRD and as per direction of the Engineer-in-charge. |
| 12 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 of MoRD and as per the direction of the Engineer-in-charge. |
| 13 | 600mm Equilateral Triangle |
| 14 | 600mm dia Circular |
| 15 | 600mm x 450mm Rectrangle |
AI Tender Summary
Tender Timeline
Aug 21, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 29, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender