Public Health Engineering Department-PHED has published Tender For Work Of Narmada Based Water Supply Scheme For 163 Village Of Dhorimanna Chouhtan Block Distt. Barmer Pkg Cp-03 Chouhtan-1 Under Jica Funded Rrws And Fluorosis Mitigation Project Phase Ii On Spr Basis With 1 Yr Defect Notification Period And 10 . Submission Date for this Tender is 14-12-2023. Water Supply Project Tenders in barmer Rajasthan. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 09-Oct-2023 | CORRIGENDUM I | Date | 09-11-2023 |
2 | 13-Oct-2023 | ADDENDUM I | Technical Bid | 09-11-2023 |
3 | 07-Nov-2023 | CORRIGENDUM II | Date | 04-12-2023 |
4 | 02-Dec-2023 | CORRIGENDUM III | Date | 14-12-2023 |
Sl. No. | Item Description |
1 | BILL 1 - WATER TREATMENT PLANT |
2 | Survey, Design, Construction, Testing and Commissioning of Rapid Gravity Water Treatment Plant (Output Capacity 58 MLD or 2636.365 KL/Hr.) including all relevant Civil, Electrical, Mechanical, Instrumentation, Automisation, SCADA Worksalong with Ancillary Civil Works as per specifications and Employer"s requirement complete in all respect. at ALETI HW. (Instrumentation, Automisation and SCADA works shall be paid as per Section for Instrumentation, Outdoor Switchyard as per Section for Electrical) |
3 | Inlet and Distribution System: Inlet chamber, Measuring channel, Flash Mixers, Main/ By Pass Channel to Filter Beds, Walkways, Stairs, Railings etc. |
4 | Equipments |
5 | Civil works |
6 | Clariflocculators: Pipes between Flash Mixers and Clariflocculators, Clariflocculators, Walkways, Stairs, Railings, Clarified Water Channel to the Filter Inlet Channel and Sludge Pipe to Sludge Buffer Tanks etc. |
7 | Equipments |
8 | Civil works |
9 | Filters and Filter House: Filters,Distribution/ Back Wash Channel, Pipe Gallery with Clear Water Channel and Sump, Control Gallery, observation Platforms, Walkways, Stairs, Railings, Back Wash Water Tank, Clear Water Measuring Channel, and any other item required for completion of filter plant other than specified in BOQ. |
10 | Equipments |
11 | Civil works |
12 | Administrative and Control Building: Administrative Control Building, Backwash Pumps, Air Blowers, Laboratory Equipment, Water Cooler, Furniture etc. as per Scope of Work and Specifications |
13 | Equipments |
14 | Civil works |
15 | Chemical House: Chemical House, Alum/PAC and Lime Dosing Equipment, Piping to the Injection Point and Injection Devices |
16 | Equipments |
17 | Civil works |
18 | Chlorine Building, Chlorination and Chlorine Storage: Chlorine Storage Area, Chlorine Building, Chlorine Toners, Chlorination Equipments, Chlorination Chamber, Injection Devices etc |
19 | Equipments |
20 | Civil works |
21 | Backwash Water and Sludge Recycling and Disposal: Construction of Wwater Recirculation System including associated work of Inlet/Outlet, Recycling of Backwash Water and Sludge Handling and Disposal System, Pumps and Piping etc. |
22 | Equipments |
23 | Civil works |
24 | BILL-2 - PIPELINE WORKS |
25 | Earth work in Excavation in all kind of Strata (all type of Soil/ soft rock/ hard rock etc), including Road Cutting in all type of road (RCC/Cement Concrete / bitumen road/stone pitching road /gravel road etc) and including road restoration in all type of road (RCC/Cement Concrete / bitumen road/stone pitching road /gravel road etc), Sand/Soil Bedding in rocky starta or wherever required, disposal of surplus excavated Earth for the Trench, Road Cuttings/Crossing (other than pushin) & Road resotoration ,River/ Drain and Canal/Gas/Petroleum Pipelines Crossing (other than pushin), Construction of RCC -Pedestals, Anchor/Thrust/Fixidity Blocks, Cross walls, Protective Aprons, Encasing, other Civil Worksetcas per specifications and Employer requirement for following diameter Pipe Line:- |
26 | 75mm |
27 | 90mm |
28 | 100 mm |
29 | 110mm |
30 | 125mm |
31 | 140mm |
32 | 150 mm |
33 | 160 mm |
34 | 180mm |
35 | 200 mm |
36 | 225mm |
37 | 250 mm |
38 | 300 mm |
39 | 350 mm |
40 | 450 mm |
41 | 500 mm |
42 | 700 mm |
43 | 900 mm |
44 | 1200 mm |
45 | Survey, Design, Supply, Laying, Jointing, Testing and Commissioning of ISI markedS/SDI (Ductile Iron) K7 Class Pipeas per IS:8329-2000 (Amended up to date) for Raw / Clear Water Transmission, ESR/ GSRRising Main, Cluster/Village Distributionincluding Flanged Pipes wherever required, Socket/FlangedSpecials and Isolations and Interconnection works with existing system where dovetailing is required . This work also includes the required Laying above the Ground Level, Crossing requiredfor Drain, Canal, River and Road crossingswith Reinstatement Works,following diameters of Pipe Linesas per Employer requirement and Specification.(Payment for Casing Pipe to CrossNational/State/Mega Highway/GREF Road shall be made as per seperate item. However, MS / DIDF / Fitting for other to this shall be paidin this section ). |
46 | 100 mm dia |
47 | 150 mm dia |
48 | 200 mm dia |
49 | 250 mm dia |
50 | 300 mm dia |
51 | 350 mm dia |
52 | 450 mm dia |
53 | 500 mm dia |
54 | 700 mm dia |
55 | 900 mm dia |
56 | Survey, Design, Supply, Laying, Jointing, Testing and Commissioning of ISI markedS/SDI (Ductile Iron) K9 Class Pipeas per IS:8329-2000 (Amended up to date) for Raw / Clear Water Transmission, ESR/ GSRRising Main, Cluster/Village Distributionincluding Flanged Pipes wherever required, Socket/FlangedSpecials and Isolations and Interconnection works with existing system where dovetailing is required . This work also includes the required Laying above the Ground Level, Crossing requiredfor Drain, Canal, River and Road crossingswith Reinstatement Works,following diameters of Pipe Linesas per Employer requirement and Specification.(Payment for Casing Pipe to CrossNational/State/Mega Highway/GREF Road shall be made as per seperate item. However, MS / DIDF / Fitting for other to this shall be paidin this section ). |
57 | 100 mm |
58 | 150 mm |
59 | 200 mm |
60 | 250 mm |
61 | Survey,Design, Supply, Laying, Jointing, Testing and Commissioning in position to correct line spirally welded MS /SAW/Fabricated Pipe having bevelled end plates / coils, confirming to IS 3589-2001 or its latest revision/ amendments, forthickness (as per approved design) and inside dia Mtr, including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges,including cost of labour and material, specials (Tee, bend etc.), field joints,satisfactory hydraulic testing, disinfection, commissioning etc. completeas per technical specifications anddirection of Engineer-in-charge; Providing and applying following Coating to the External surface of MS pipes, including preparation of surface by cleaning as per ISO 8502-3/ SSPC-SP10/ NACE No.2 near white blast cleaning and abrasive blasting to a finish to SA 2.5 as per ISO: 8501-1 and surface profile / anchor profile of 50-75 / 75-100 microns as per ISO: 8503-2, including field joint coating at site complete as per Technical specifications and direction of Engineer –in-charge: 3 LPE (3 Layer Polyethylene) / DFBE (Dual Layer Fusion Bonded Epoxy)/ PU (Polyurethane)/ Polyolefin Tape coating .Providing and applying Solvent free, two pack liquid epoxy lining to internal surface of M.S. Pipe as per BS 6920:2000 and AWWA C210 standard including preparation of internal surface of pipe by cleaning and abrasive blasting including field joints coating at site complete as per technical specification and direction of Engineer in Incharge. Liquid Epoxy shall be NSF/WARS approved for drinking water. Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. |
62 | 100 mm dia confirming to IS 3589-2001 or its latest revision/ amendments/reaffirmed |
63 | 125 mm dia confirming to IS 3589-2001 or its latest revision/ amendments/reaffirmed |
64 | 150 mm dia confirming to IS 3589-2001 or its latest revision/ amendments/reaffirmed |
65 | 200 mm dia confirming to IS 3589-2001 or its latest revision/ amendments/reaffirmed |
66 | 250 mm dia confirming to IS 3589-2001 or its latest revision/ amendments/reaffirmed |
67 | 300 mm dia confirming to IS 3589-2001 or its latest revision/ amendments/reaffirmed |
68 | 350 mm dia confirming to IS 3589-2001 or its latest revision/ amendments/reaffirmed |
69 | 450 mm dia confirming to IS 3589-2001 or its latest revision/ amendments/reaffirmed |
70 | 500 mm dia confirming to IS 3589-2001 or its latest revision/ amendments/reaffirmed |
71 | Outer Dia. 711 mm & 06.30 mm min. thickness confirming to IS 3589-2001 or its latest revision/ amendments/reaffirmed |
72 | Outer Dia. 914 mm & 08 mm min. thickness confirming to IS 3589-2001 or its latest revision/ amendments/reaffirmed |
73 | Outer Dia. 1219 mm & 10 mm min. thickness confirming to IS 3589-2001 or its latest revision/ amendments/ reaffirmed |
74 | Providing, erction andcommissioning of Cathodic protection for the buried portion of 900 mm & 1200 mm MS pipeline including cost of rubber gaskets etc. required for cathodic protection seperation, if any, construction of terminals etc. as per specification |
75 | 900 mm dia |
76 | 1200 mm dia |
77 | Survey, Design, Supply, Lying and Pushing of MS Casing Pipe as per approved design & drawing of concern Department Authority/EIC( for following carrier pipe dia.) of specified thickness (thikness as per approved drawing&design) including all type ofrequired size of casing pipe , SluiceValves/other Valves at U/S and D/S and jointing/supporting materials with valve chamber etc civil work approved by concerned Department Authority/EIC by Trenchless Method adopting any suitable Technology Below Ground at required depth under Running Traffic Condition as per NH/SH/GREF/MEGA Highway Standard/GREF road/Canal Crossing, including Excavation of Driven Pits and Exit Pit with proper Protection, Construction of Temporary Works etc. as perapproved by concernAuthority Specificationas per Employer"s Requirement Specification for following CarrierPipe diameter (Carrier Pipe shall be measured in Pipe Line Length in separate item) including all type ofExcavation of boring pit & receiving pit provide Thrust Wall / Bed as required boring, jacking of MS pipe in embankment for crossingas per approved design &drawing - For all soil strata (for Canal/road etc Crossing ) by trenchless technology |
78 | MS Casing Pipe required for carrier pipe of 100 mm dia |
79 | MS Casing Pipe required for carrier pipe of 125 mm dia |
80 | MS Casing Pipe required for carrier pipe of 150 mm dia |
81 | MS Casing Pipe required for carrier pipe of 200 mm dia |
82 | MS Casing Pipe required for carrier pipe of 250 mm dia |
83 | MS Casing Pipe required for carrier pipe of 300 mm dia |
84 | MS Casing Pipe required for carrier pipe of 350 mm dia |
85 | MS Casing Pipe required for carrier pipe of 450 mm dia |
86 | MS Casing Pipe required for carrier pipe of 500 mm dia |
87 | MS Casing Pipe required for carrier pipe of 700 mm dia |
88 | MS Casing Pipe required for carrier pipe of 900 mm dia |
89 | MS Casing Pipe required for carrier pipe of 1200 mm dia |
90 | Survey, Design, Supply, Laying, Aligning, Fixing in position, Jointing, Testing, Commissioningof ISI marked HDPE Pipes of Class PE 80, PN-6 suitable for Potable Water as per IS 4984:1995 (Amended up to date) withSpecials and necessary Jointing Material like Mechanical Connectors i.e. Thread / Insert Joint / Quick Release Coupler Joint /Compression Fitting Joint or Flanged Joint and Special Jointing Pipe by Butt Fusion / Electro Fusion Welding method,Flanged Joints shall be used for Jointing HDPE Pipes to Valves and Non-HDPE Pipes. This work also includes the Drain/ Canal/ River/ Road Crossingswith Reinstatement works forfollowing outer diameters of Pipe Lines as per Employer"s Requirement and Specification :(Payment for Casing Pipeto CrossNational/State/Mega Highway/GREF Roadshall be made as per seperate item. However MS / DIDF / Fitting for other to this shall be measured in this section ).- |
91 | 75mm |
92 | 90mm |
93 | 110mm |
94 | 125mm |
95 | 140mm |
96 | 160mm |
97 | 180mm |
98 | 200mm |
99 | 225mm |
100 | Supply, Installation, Testing and Commissioning of following diameter PN 1.0 Rating Tamper ProofCI Single Air valveincluding construction of RCC Air Valve Shaft (height 3.0m above ground level) complete work on DI/HDPE Pipe Lines as per Employer"s Requirement and Specification - |
101 | 25 mm |
102 | 40mm |
103 | 50mm |
104 | Supply, installation, Testing and Commissioning of following diameter PN 1.6 Rating DI Kinetic type temper proof Double orifice Air Valve with Isolation Valves including construction of RCC Air Valve Shaft(height 3.0m above ground level) complete work on DI/HDPE Pipe Lines as per Employer"s Requirement and Specification - |
105 | 50mm |
106 | 80mm |
107 | 100mm |
108 | 150mm |
109 | Supply, installation, Testing, Commissioning and Jointing inpipe line, combinationAir Release Valve Kinetictype withsingle chamber housed Double orificeandhave3functions,largeAirexhaust,smallAirventingandlargeair intakeduringvacuum ofpipelineofapprovedmakesoffollowingpressure rating anddiaandasperfollowingspecifications: Governingstandard-AWWAC512, Body and bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GRSG-400/12asperIS1865, Float&internaltrim:AISI304stainlessSteel,Seat ring & Gasket - EPDM/NBRDrilled as per IS:1538. Electrostatic Epoxy Powder (EP- P)/FusionBondedEpoxy(Non-Toxic&suitablefordrinkingwater)coatedwith minimumthicknessof250micronappliedonbody&cover insideandoutside Fasteners- CS/ Galvanised steel, Outlet of big orifice will have a screen to prevent Tamper of float, Big orifice size should be equal or larger than the inlet flange bore, forfullycomplywith AWWA C512), Valveincludingallmaterial,labour, testingandcommissioningasperTechnicalSpecificationsandas perdirectionof Engineer in charge. |
110 | 150 mm dia (PN 1.6 ) |
111 | Supply, Installation, Testing and Commissioning of following diameter PN 1.0 Rating CI Scour Valvesincluding all type of jointing material, Dismantling Joints, Fittings, nutbolt, rubbersheet and Specials etc,complete work at all required locations per Employer"s Requirement and Specification:- |
112 | 80mm |
113 | 100mm |
114 | Supply, Installation, Testing and Commissioning of following diameter PN 1.6 Rating CI Scour Valves (with Gear Arrangement if required)including all type of jointing material, Dismantling Joints, Fittings, nutbolt, rubbersheet and Specials etc,complete work at all required locations as per Employer"s Requirement and Specification:- |
115 | 80mm |
116 | 100mm |
117 | 150 mm |
118 | 200 mm |
119 | 250 mm |
120 | 300 mm |
121 | Supply, Installation, Testing and Commissioning of following diameter PN 1.0/1.6 Rating D/F CI Sluice Valves(with Gear Arrangement if required) including all type of jointing material, Dismantling Joints, Fittings, nutbolt, rubbersheet and Specials etc,complete work at all required locations per Employer"s Requirement and Specification:- |
122 | 100 mm dia |
123 | 150 mm dia |
124 | 200 mm dia |
125 | 250 mm dia |
126 | 300 mm dia |
127 | Supply, Installation, Testing and Commissioning offollowing diameter suitable RatingDI Soft Seated Sluice Valves(with Gear Arrangement if required) for Off takes/Junctions, Sectionalising, outside of pump house and at upstream of FCV to Pipe Line, including in-village pipelines including all type of jointing material, Dismantling Joints, Fittings, nutbolt, rubbersheet and Specials etc, complete work as per Employer"s Requirement and Specification:- |
128 | Manually Operated Resilient Seated Sluice Valves of Class PN 1.6 |
129 | 80mm |
130 | 100mm |
131 | 125mm |
132 | 150mm |
133 | 200mm |
134 | 250mm |
135 | 300mm |
136 | 350mm |
137 | 400mm |
138 | 450mm |
139 | 500mm |
140 | 600 mm |
141 | 700 mm |
142 | 800 mm |
143 | 900 mm |
144 | 1000 mm |
145 | 1100 mm |
146 | Motorized Sluice Valves with Electric Actuator and integral starter of Class PN 1.6 |
147 | 100 mm dia |
148 | 125 mm dia |
149 | 150 mm dia |
150 | 200 mm dia |
151 | 350 mm dia |
152 | 400 mm dia |
153 | 500 mm dia |
154 | 600 mm dia |
155 | 700 mm dia |
156 | 900 mm dia |
157 | 1000 mm dia |
158 | 1200 mm dia |
159 | Supply, Installation, Testing and Commissioning of following diameter suitable RatingDI Soft Seated Butterfly Valves for Sectionalising to Pipe Line including all type of jointing material, Dismantling Joints, Fittings, nutbolt, rubbersheet and Specials etc, complete work as per Employer"s Requirement and Specification:- |
160 | Class PN 1.6 Manually Operated with Gear |
161 | 1200mm |
162 | Class PN 1.6 Motorised Operated |
163 | 700 mm dia |
164 | 900 mm dia |
165 | 1000 mm dia |
166 | 1200 mm dia |
167 | Supply, Installation, Testing and Commissioning of following diameter suitable RatingDIdouble flanged resilient seated Dual plate check valves onindividual & common delivery piping of following sizes (PN-1.6) for Sectionalising to Pipe Line including all type of jointing material, Dismantling Joints, Fittings, nutbolt, rubbersheet and Specials etc, as per Employer"s Requirement and Specification:- |
168 | 100 mm dia |
169 | 125 mm dia |
170 | 150 mm dia |
171 | 200 mm dia |
172 | 350 mm dia |
173 | 400 mm dia |
174 | 500 mm dia |
175 | 600 mm dia |
176 | 700 mm dia |
177 | 1000 mm dia |
178 | Supply, Installation, Testing and Commissioning offollowing diameter suitable RatingPlungar Type Flow and Pressure Control Valves including all type of jointing material, Dismantling Joints, Fittings, nutbolt, rubbersheet and Specials etc,along as per Employer"s Requirement and Specification:- |
179 | 80mm |
180 | 150mm |
181 | Carrying out Surge Analysis, Construction, Supply, Installation, Testing and Commissioning of suitable Surge Controlled Devices as approved with all Piping, Valves, Accessories forthe Transmission and Rising/ Pumping Mains complete as per Employer"s Requirement and Specifications :- |
182 | Transmission Main |
183 | Raw Water Transmission Main from RD 74 Km RWPS TO Aleti H/W |
184 | RWR TO WTP |
185 | ALETI HEAD WORKS to IPS BAMARALA |
186 | IPS BAMARALA to IPS PHAGALIYA |
187 | IPS BAMARALA to IPS SOBHALA DARSHAN |
188 | IPS PHAGALIYA to CPS FAKIRON KA NIWAN |
189 | IPS PHAGALIYA to CPS SATA |
190 | IPS SOBHALA DARSHAN to IPS DHANAOO |
191 | IPS SOBHALA DARSHAN to CPS SERWA |
192 | ESRs Rising Main from |
193 | Aleti HEAD WORKS |
194 | IPS BAMARALA |
195 | IPS PHAGALIYA |
196 | CPS SATA |
197 | CPS FAKIRON KA NIWAN |
198 | CPS SERWA |
199 | IPS SOBHALA DARSHAN |
200 | Survey, Design, Construction of RCC valve chambers for Sectionalizing valves,offftake/junction valves, flow meters(FM+DJ) and (FM+DJ+SV), complete work at all required locations. This also includesexcavation in all type of Strata with all lift, refilling of earth, disposal of excess earth materials for following pipe sizes as per employer"s requirement and Specification :- |
201 | up to 125 mm (Minimum size 1.13mx0.85m) |
202 | above 125 mm & up to 200mm (Minimum size 1.17mx0.95m) |
203 | above 200 to 300mm (Minimum size 1.26mx1.185m) |
204 | 350 to 450mm (Minimum size 1.39mx1.43m) |
205 | 500 to 700mm (Minimum size 1.61mx1.75m) |
206 | 750 to 1200mm (Minimum size 2.10mx2.30m) |
207 | Survey, Design, Construction of RCC chambers for Scourvalves, supports, complete work at all required locations. This also includes end excavation in all type of Strata with all lift, refilling of earth, disposal of excess earth materials for the following Valve sizes as per employer"s requirement and Specification :- |
208 | 80/100 mm dia (Minimum size 1.13mx0.85m) |
209 | Survey, Design, Construction of RCC chambers for SV+DJ+FCV+FM+DJ, within campus, supports,complete work at all required locations. This also includes end excavation in all type of Strata with all lift, refilling of earth, disposal of excess earth materials the following Valve sizes as per employer"s requirement and Specification :- |
210 | up to 250mm (Minimum size 3.0mx1.5m) |
211 | BILL-3 - RESERVOIR WORKS |
212 | Surveying, Geotechnical Investigations, Designing and construction of Raw water Reservoir, earth work, Double PCC Block Lining work, HDPE film work, Ramp, inlet sump, inlet/delivery well, including the works related to inlet arrangements delivery well, making interconnection, Bituminous Road work all around the RWR; with all finishing work to complete the structure in all respect etc. as per attached drawing, scope of work, specification and as per direction of Engineer-in-charge complete in all respect at Aleti HW. (As per approved Drawing & Designfrom MNIT Jaipur/MBM Engineering college Jodhpur or any Indian Institute of Technology Govt. of India.) |
213 | 1420 ML capacity |
214 | Survey, Design, Construction, Testing, Commissioningof circular RCC Clear Water reservoirs includingCI/DI puddle collars for inlet, one/two outlets, overflow and washout. It also includes Providing and fixing double flanged ISI marked DI class K- 9 pipes {as per IS:8329-2000 (amended upto date), as cortical pipes for RCC reservoirs including specials required such as duckfoot bend, bend tee etc. Providing clamps at every 3 MTR, jointing metrials such as nuts, bolt, rubber packing, hydraulic testing etc. Complete in all respect upto and form valve chamber as per direction of EIC, technical specification and scope of work} for inlet, outlet, overflow and washout along with ductfoot bends, DI soft seated Valves along with Dismantling Joints on inlet, outlet and washout pipes with sluice valves (both of these piping upto the chamber where these will join storm water drain pipe), construction of chamber to join overflow+washout with storm water drain pipe complete in all respect (Rates are invited for SBC 7 MT/Sqm or as per site,Earthquake zone IVas per IS 1893; However payment shall be made as per Conditions of Contract Agreement.) at following locations:- |
215 | CPS Sata (800 KL) |
216 | CPS Fakhiron ka Niwan (700 KL) |
217 | CPS Serwa(500 KL) |
218 | CPS Aleti HW (5750 KL) |
219 | IPS Bamarla (5600 KL) |
220 | IPS Phagaliya (1400 KL) |
221 | IPS Dhanoo (3200 KL) |
222 | IPS Shobhala Darshan (3700 KL) |
223 | Survey, design, Construction, Testing, Commissioningof RCC Elevated Service reservoirs at different locations and as per the stated effective capacity includingCI/DI puddle collars for inlet, outlet, overflow and washout. It inludes Providing and fixing double flanged ISI marked DI class K- 9 pipes {as per IS:8329-2000 (amended upto date), as cortical pipes for RCC reservoirs including specials required such as duckfoot bend, bend tee etc. Providing clamps at every 3 MTR, jointing metrials such as nuts, bolt, rubber packing, hydraulic testing etc. Complete in all respect upto and form valve chamber as per direction of EIC, technical specification and scope of work} for inlet, outlet, overflow and washout along with ductfoot bends, DI soft seated Valves along with Dismantling Joints on inlet, outlet and washout pipes; making by pass arrangements along with Sluice Valve with Dismantling joints for by passing the ESR for supplying water directly from inlet, making connection of overlow pipe with washout on the downstream of its" Sluice Valve approximately at 6m away from ESR, providing and laying NP pipe from the junction of overflow with washout with minimum 20m length. Making Header on the outlet pipe (on the downstream of by pass arrangements) to faciliate joining more than one cluster distribution pipeline emanating from the ESR, Plinth Protection, Levelling and Plantation in campus, Chambers, Lightneing arrestor Complete in all respect with Design and Construction of RCC FramedService Room ( Min size 2.4m x 2.4m ) in the ESR campusas per employers requirementsand specifications : (Rates are invited for SBC 7 MT/Sqm or as per site, 18m staging, Earthquake zone IVas per IS 1893; However payment shall be made as per Conditions of Contract Agreement.) For staging above 18 meters,2% per meter increase over quoted rates shall be payable. Staging above 22m will not be allowed. |
224 | 100 KL |
225 | 150 KL |
226 | 200 KL |
227 | 250 KL |
228 | 300 KL |
229 | 400 KL |
230 | 500 KL |
231 | BILL-4PUMPING STATION WORKS |
232 | Civil WORKS |
233 | Survey,Design and Construction of RCC framed type structure Pump House with transition zone and complete civil work for taking water from WRD canal offtake to RWPH , (with provision of trash rack from outlet Chamber, Sump for raw water pump house to accommodateVT pumps, providingassociated Electrical and plumbing works for water supply and sanitation, Civil work required for installation of gantry for Semi EOT crane, Pipes and specials, rain water harvesting & collection system for rain water frompump house roofto thesumpcomplete in all respect as per employer"s requirement and Specifications at following location:- |
234 | RD 74 KM RWPS |
235 | Survey, Investigations, Design andModification, Construction of intake structure to accommodate VT pumps,providingassociated Electrical and plumbing works for water supply and sanitation, Civil work required for installation of gantry for Semi EOT crane, Pipes and specials, rain water harvesting & collectionsystem for rain water frompump house roofto thesumpcomplete in all respect as per employer"s requirement and Specifications at following location:- |
236 | RWPS for RWR to WTP |
237 | Survey,Design and Construction of RCC framed structure pump house buildingto accommodate C/ Fpump sets, Maintenance bay, Control Roomwith associate Electrical / Plumbing work. Thisshall includeCivil works required for erection of Semi EOT crane,installation of pumps and panels, cable trenches, drainage, access platforms, ladders, thrust/anchor blocks, pipe supports, Pipes and specials, rain water harvesting & collectionsystem for rain water frompump house roofto thesumpcomplete in all respect as per employer"s requirement and Specifications at following location:- |
238 | At Aleti Head work |
239 | At Bamarla Head work |
240 | At Shobhala Darshan Head work |
241 | At Phagaliya Head work |
242 | At Serwa Head work |
243 | At Sata Head work |
244 | At Fakiro Ka Niwan Head work |
245 | Supply of office furniture as per Employer requirement and Specification as per Specifications at RD 74 KM RWPS, Aleti Head work, Bamarla Head work, Shobhala Darshan Head work, Barmer CR, Chouhtan CR, Phagaliya Head work, Serwa Head work, Sata Head work and Fakiro Ka Niwan Head works |
246 | MECHNICAL WORKS AND PUMPING MACHINARY:- Design, Providing , Installation, Testing, Commissioningfor following as per Employer requirement and Specification:- |
247 | MS/DI pipe work for suction piping, from puddle Collar in CWR and common cum individual suction header with inside and outside protection (Tape coating/ epoxy coating) and all miscellaneous bore in pump house wall at following location :- |
248 | Aleti HEAD WORKS |
249 | AletiRWPS |
250 | IPS BAMARALA |
251 | IPS PHAGALIYA |
252 | IPS SOBHALA DARSHAN |
253 | MS/DI pipe work for suction piping, from puddle collar in CWR and common suction header and individual suction header with inside and outside protection (Tape coating/ epoxy coating)and all miscellaneous bore in pump house wall at following locations :- |
254 | CPS SATA |
255 | CPS FAKIRON KA NIWAN |
256 | CPS SERWA |
257 | MS/DI pipe work for reducer, enlarger, inividual delivery piping of each pump and common delivery header with inside and outside protection (Tape coating/ epoxy coating)up to Valve/flow meter and related works including bore in walls at following locations as -:- |
258 | RD 74 KM RWPS |
259 | RWPS for RWR to WTP |
260 | MS/DI pipe work for individual suction from common header, reducer, enlarger, inividual delivery piping of each pump and common delivery header with inside and outside protection (Tape coating/ epoxy coating)up to Valve/flow meter and related works including bore in walls at following locations as -:- |
261 | Aleti HEAD WORKS |
262 | IPS BAMARALA |
263 | IPS PHAGALIYA |
264 | IPS SOBHALA DARSHAN |
265 | CPS SATA |
266 | CPS FAKIRON KA NIWAN |
267 | CPS SERWA |
268 | Manually operated PN 1.0/ 1.6 ratingsoft seated sluice valves with dismantling joints at intersection of CWR outlet with common suction header and individual suction of each pump at following locations:- |
269 | RD 74 Km RWPS |
270 | RWPS at Aleti |
271 | Aleti HEAD WORKS |
272 | IPS BAMARALA |
273 | IPS PHAGALIYA |
274 | IPS SOBHALA DARSHAN |
275 | CPS SATA |
276 | CPS FAKIRON KA NIWAN |
277 | CPS SERWA |
278 | Ductile Iron PN 1.6 rating Double Plate Check valves with Expansion Bellow Type Dismantling Joint oneach pump delivery sideat following locations:- |
279 | RD 74 Km RWPS |
280 | RWPS at Aleti |
281 | Aleti HEAD WORKS |
282 | IPS BAMARALA |
283 | IPS PHAGALIYA |
284 | IPS SOBHALA DARSHAN |
285 | CPS SATA |
286 | CPS FAKIRON KA NIWAN |
287 | CPS SERWA |
288 | Ductile IronPN 1.6 ratingElectrically operated Butterfly/ Soft seatedSluice valve with actuators oneach individual delivery of each pump side at following locations:- |
289 | RD 74 Km RWPS |
290 | RWPS at Aleti |
291 | Aleti HEAD WORKS |
292 | IPS BAMARALA |
293 | IPS PHAGALIYA |
294 | IPS SOBHALA DARSHAN |
295 | CPS SATA |
296 | CPS FAKIRON KA NIWAN |
297 | CPS SERWA |
298 | PN 1.6 ratingManually operated soft seated sluice valves with expansion bellow type dismantling joints on individual delivery of each pump as well as on common delivery header at following locations:- |
299 | RD 74 Km RWPS |
300 | RWPS at Aleti |
301 | Aleti HEAD WORKS |
302 | IPS BAMARALA |
303 | IPS PHAGALIYA |
304 | IPS SOBHALA DARSHAN |
305 | CPS SATA |
306 | CPS FAKIRON KA NIWAN |
307 | CPS SERWA |
308 | Vertical Turbine Pumps with 6.6/.415 KV motor, Column pipe, shaft and other accessories complete at following location:- |
309 | RD 74 Km RWPS (VT pump with 6.6 KV motor) |
310 | From Canal to RWR Aleti HW (for normal flow) (2W+1S) |
311 | From Canal to RWR Aleti HW (for Pre-Closure flow) (4W+2S) |
312 | RWPS at Aleti (VT pump with 0.415 KV motor) |
313 | From RWR to WTP Aleti HW (2W+1S) |
314 | HSC / End Suction type Centrifugal Pump sets (1W+1S) with LT 0.415 kV horizontal motor,base plates, Coupling, foundation bolts, accessories etc. on concrete foundation with accurate levellingand proper alignment completeat following locations:- |
315 | ALETI HEAD WORKS |
316 | ALETI HEAD WORKS to IPS BAMARALA (3W+2S) |
317 | ALETI HEAD WORKS to P-SR PRATAP NAGAR CL-02 , P-SR RADOOCL-05 , P-SR ARNIYALI CL-03 , P-SR DHAKON KA GOLIYA CL-04(1W+1S) |
318 | ALETI HEAD WORKS to P-SR ALETI CL-01(1W+1S) |
319 | IPS BAMARALA |
320 | IPS BAMARALA to IPS PHAGALIYA(1W+1S) |
321 | IPS BAMARALA to IPS SOBHALA DARSHAN(2W+2S) |
322 | IPS BAMRALA to P-SR BAMARALA CL-06(1W+1S) |
323 | IPS BAMRALA to P-SR MAYLON KI BERICL-12 , P-SR BHAWANIPURA CL-11 , P-SR CHALKANA CL-10(1W+1S) |
324 | IPS BAMRALA to P-SR BHARTHE KI BERI CL-07 , P-SR MOTI KI BERI CL-08 , BHAGBHARE KI BERI CL-09 (1W+1S) |
325 | IPS BAMRALA to P-SR SHERPUR CL-13 , P-SR AAKAL CL-14 , P-SR KHARADER CL-15 route29 LPS / 68 m head/37 KW (1W+1S) |
326 | IPS SOBHALA DARSHAN |
327 | IPS SOBHALA DARSHAN to IPS DHANAOO (2W+2S) |
328 | IPS SOBHALA DARSHAN to CPS SERWA (1W+1S) |
329 | IPS SOBHALA DARSHAN to P-SR ROHILA CL-57 , P-SR SONRI CL-58 , P-SR DOB KI BERI CL-59 , P-SRPABUBERI CL-60 (1W+1S) |
330 | IPS SOBHALA DARSHAN to P-SR SHOBHALA DARSAN CL-56 , P-SR MANDON KI BERI CL-61 , P-SR BHOONIYACL-62 (CH-2) (1W+1S) |
331 | IPS PHAGALIYA |
332 | IPS PHAGALIYA to CPS FAKIRON KA NIWAN (1W+1S) |
333 | IPS PHAGALIYA to CPS SATA (1W+1S) |
334 | IPS PHAGALIYA to P-SR PHAGALIYA CL-19 (1W+1S) |
335 | IPS PHAGALIYA to P-SR GANGASARA CL-20 , P-SR GORA CL-21 (1W+1S) |
336 | IPS PHAGALIYA to P-SR PANORIYA CL-16 , P-SR BOLI CL-18 , P-SR KHARI CL-17 (1W+1S) |
337 | CPS SERWA |
338 | CPS SERWA to P-SR SERWA CL-48(1W+1S) |
339 | CPS SERWA to P-SR SAMAWALI CL-49 , P-SR SAMON KI DHANI CL-50 , P-SR BHANWAR CL-52 (1W+1S) |
340 | CPS SERWA to P-SR SALRIYA CL-51 , P-SR SINHAR CL-54 , P-SR BEESASAR CL-55 (CH-2) (1W+1S) |
341 | CPS SERWA to P-SR KUNDANPURA CL-53(1W+1S) |
342 | CPS SATA |
343 | CPS SATA to P-SR SATA CL-22 , P-SR RANWA CL-27 , P-SR NAWAPURA CL-28(1W+1S) |
344 | CPS SATA to P-SR GANGASARIYA CL-29 , P-SR TARLA CL-30 , P-SR BHANWARIYA CL-31 , P-SR GIRA CL-32 (1W+1S) |
345 | CPS SATA to P-SR ARTI CL-35 , P-SR MEETHRI CL-34 , P-SR CHHOTA HATHLA CL-33 (1W+1S) |
346 | CPS SATA to P-SR BAKHASAR CL-23 , P-SR BHALGAON CL-26 , P-SR TAREESARA CL-24 , P-SR BAWARWALA CL-25(1W+1S) |
347 | CPS FAIKORON KA NIWAN |
348 | CPS FAIKORON KA NIWAN , P-SR MOOLANI CL-36 , P-SR JHARPA CL-40 , P-SR NAWATALA BAKHASAR CL-41 , P-SR BHARA CL-42 (1W+1S) |
349 | CPS FAIKORON KA NIWAN , P-SR BAMARLADER CL-38 , P-SR SINHANIYA CL-37 , P-SR BHADA CL-39 (1W+1S) |
350 | CPS FAKIRON KA NIWAN , P-SR HARPALIYA CL-45 , P-SR SUJON KA NIWAN CL-43 , P-SR SARLA CL-47 , P-SR SARAIYON KA TALA CL-46 (CH-2) , P-SR DEEPLA CL-44 (1W+1S) |
351 | Overhead Treverssing Crane Semi Electrically operated of suitable capacity along with MS girders, MS rails, electric hoist, chain etc. at following locations:- |
352 | RD 74 Km RWPS |
353 | RWPS at Aleti |
354 | Aleti HEAD WORKS |
355 | IPS BAMARALA |
356 | IPS PHAGALIYA |
357 | IPS SOBHALA DARSHAN |
358 | CPS SATA |
359 | CPS FAKIRON KA NIWAN |
360 | CPS SERWA |
361 | Submersible Drain pumps of Minimum 3 m3/hr capacity @ 10 meters head at following locations:- |
362 | RD 74 Km RWPS |
363 | RWPS at Aleti |
364 | Aleti HEAD WORKS |
365 | IPS BAMARALA |
366 | IPS PHAGALIYA |
367 | IPS SOBHALA DARSHAN |
368 | CPS SATA |
369 | CPS FAKIRON KA NIWAN |
370 | CPS SERWA |
371 | Continuous type Electro chlorinator (1 working+1 standby) of suitable capacity (The capacity of Electro-chlorinator shall be minimum 2 kg/Hr, But the bidder has to work out the capacity of Electro-Chlorinator based on demand and tail end residual chlorine requirement of Minimum 0.2 ppm) including all required pipe fitting, accessories, valves, Brine Tank (HDPE material) of required capacity, level and Temperature sensors, pumps, Rotameter, Electrolyser, Hypo tank (HDPE Material), Blower, acid tank and pump, DC rectifier cum Control Panel and all required power and control cables complete for post chlorination/disinfection at following locations:- |
372 | IPS BAMARALA |
373 | IPS PHAGALIYA |
374 | IPS SOBHALA DARSHAN |
375 | CPS SATA |
376 | CPS FAKIRON KA NIWAN |
377 | CPS SERWA |
378 | Electrical WORKS:-Design, Provide , Installation, Testing, Commissioningfor following as per Employer requirement and Specification (FromJdVVNL End toMotor Panel) |
379 | Distribution Transformers (1W+1S) including all other accessories and protection devices complete at following locations with Minimum Rating (subject to as per design & ER):- |
380 | 33/6.6 KV at RD 74 Km RWPS |
381 | 33/0.415 KV at RD 74 Km RWPS |
382 | 33/0.415 KV at Aleti HEAD WORKS |
383 | 33/0.415 KV at IPS BAMARALA |
384 | 33/0.415 KV at IPS PHAGALIYA |
385 | 11/0.415 KV at CPS SATA |
386 | 11/0.415 KV at CPS FAKIRON KA NIWAN |
387 | 11/0.415 KV at CPS SERWA |
388 | 33/0.415 KV at CPS IPS SOBHALA DARSHAN |
389 | 33 KV, Switch board ( HT VCB panel ) withall required protection, equipment, Instrument, accessories, battery with charger, DCDBetc for 33/6.6 KV substation atFollowing Locations (subject to as per design & ER):- |
390 | RD 74 Km RWPS |
391 | 33 KV, 630 Amp Switch board ( HT VCB panel ) withall required protection, equipment, Instrument, accessories, battery with charger, DCDBetc for 33/.44 KV substation atFollowing Locations:- |
392 | RD 74 Km RWPS |
393 | RWPS at Aleti |
394 | Aleti HEAD WORKS |
395 | IPS BAMARALA |
396 | IPS PHAGALIYA |
397 | CPS IPS SOBHALA DARSHAN |
398 | 11 KV, 630 Amp,Out Door type Ring Main Unit ( RMU ) including switch board HT VCB panel with 1 Incomer and 2 out going VCB withall required protection, equipment, Instrument, accessories, battery with charger, DCDBetc for 11/.44 KV substation atFollowing Locations:- |
399 | CPS SATA |
400 | CPS FAKIRON KA NIWAN |
401 | CPS SERWA |
402 | XLPE insulated H.T.cable for working voltage 33 KV from JdVVNL end point to HT panel and from Panel to transformer along with all necessary accessories,complete for following locations:- |
403 | RD 74 Km RWPS |
404 | Aleti HEAD WORKS |
405 | RWPS at Aleti |
406 | IPS BAMARALA |
407 | IPS PHAGALIYA |
408 | CPS IPS SOBHALA DARSHAN |
409 | XLPE insulated H.T.cable for working voltage 11 KV from JVVNL end point to RMU and from RMU to transformer along with all necessary accessories, complete for following locations:- |
410 | CPS SATA |
411 | CPS FAKIRON KA NIWAN |
412 | CPS SERWA |
413 | Maintenance free gel earthing for Electricalsub stations (No. of earthings as per design requirements)asat following locations:- |
414 | RD 74 Km RWPS |
415 | Aleti HEAD WORKS & RWPS Aleti |
416 | IPS BAMARALA |
417 | IPS PHAGALIYA |
418 | IPS SOBHALA DARSHAN |
419 | CPS SATA |
420 | CPS FAKIRON KA NIWAN |
421 | CPS SERWA |
422 | All civil works related to electric sub station including GSS lattice structure, if required,transformer foundation withdivide wall, oil collection sump, Piping, Chain link fencing with gates, Spreading of gravel in the sub Station areas, Civil works required for laying of cables( Trenching/ Trey) etc, for following location |
423 | RD 74 Km RWPS |
424 | Aleti HEAD WORKS & RWPS Aleti |
425 | IPS BAMARALA |
426 | IPS PHAGALIYA |
427 | IPS SOBHALA DARSHAN |
428 | CPS SATA |
429 | CPS FAKIRON KA NIWAN |
430 | CPS SERWA |
431 | Design, Provide , Installation, Testing, Commissioningfor following as per Employer requirement and Specification (Onwards to Motor Panel) |
432 | HT< switchgear housing two incomers ACBs,MCCBs,relays,metering system,CT,PT,Bus Bar,Bus Couplers etc.with requisite numbers of outgoing cubical to have Motor control unit with starters for all LT motors of main pumps, for electric actuators and Hoist, Main lighting distribution panel for inside as well as out side pump room, welding socket, spare cubicals,switchgear for DG system, complete in all respect for following location . |
433 | RD 74 Km RWPS |
434 | HT< switchgear housing two incomers ACBs,MCCBs,relays,metering system,CT,PT,Bus Bar,Bus Couplers etc.with requisite numbers of outgoing cubical to have Motor control unit with starters for all LT motors of main pumps, for electric actuators and Hoist, Main lighting distribution panel for inside as well as out side pump room, welding socket, spare cubicals,switchgear for DG system, complete in all respect for following location . |
435 | RD 74 Km RWPS |
436 | Aleti HEAD WORKS |
437 | RWPS at Aleti |
438 | IPS BAMARALA |
439 | IPS PHAGALIYA |
440 | IPS SOBHALA DARSHAN |
441 | CPS SATA |
442 | CPS FAKIRON KA NIWAN |
443 | CPS SERWA |
444 | APFC Panel with Capacitor Bank at following Pumping Station |
445 | RD 74 Km RWPS |
446 | Aleti HEAD WORKS |
447 | RWPS at Aleti |
448 | IPS BAMARALA |
449 | IPS PHAGALIYA |
450 | IPS SOBHALA DARSHAN |
451 | CPS SATA |
452 | CPS FAKIRON KA NIWAN |
453 | CPS SERWA |
454 | Local push button station for pump motors, actuators, HoistAt all locations of Pumping Station |
455 | RD 74 Km RWPS |
456 | Aleti HEAD WORKS |
457 | RWPS at Aleti |
458 | IPS BAMARALA |
459 | IPS PHAGALIYA |
460 | IPS SOBHALA DARSHAN |
461 | CPS SATA |
462 | CPS FAKIRON KA NIWAN |
463 | CPS SERWA |
464 | 110V DC system with batteries, battery charger, DC DB in panel to operate spring charging motors and LED supply on LT panel At followingpumping station . |
465 | RD 74 Km RWPS |
466 | Aleti HEAD WORKS |
467 | RWPS at Aleti |
468 | IPS BAMARALA |
469 | IPS PHAGALIYA |
470 | IPS SOBHALA DARSHAN |
471 | CPS SATA |
472 | CPS FAKIRON KA NIWAN |
473 | CPS SERWA |
474 | LT cable withAccessories, cable trays/Trenchingfor motors and all Electrical equipments to be provided in Head works at FollowingLocations |
475 | RD 74 Km RWPS |
476 | Aleti HEAD WORKS |
477 | RWPS at Aleti |
478 | IPS BAMARALA |
479 | IPS PHAGALIYA |
480 | IPS SOBHALA DARSHAN |
481 | CPS SATA |
482 | CPS FAKIRON KA NIWAN |
483 | CPS SERWA |
484 | Exhaust Fans, Pedestal type air circulator, other ventilating arrangement for Following Pump Station |
485 | RD 74 Km RWPS |
486 | Aleti HEAD WORKS |
487 | RWPS at Aleti |
488 | IPS BAMARALA |
489 | IPS PHAGALIYA |
490 | IPS SOBHALA DARSHAN |
491 | CPS SATA |
492 | CPS FAKIRON KA NIWAN |
493 | CPS SERWA |
494 | Earthing system for LV systems and motors installed in the contract in the Head works At |
495 | RD 74 Km RWPS |
496 | Aleti HEAD WORKS |
497 | RWPS at Aleti |
498 | IPS BAMARALA |
499 | IPS PHAGALIYA |
500 | IPS SOBHALA DARSHAN |
501 | CPS SATA |
502 | CPS FAKIRON KA NIWAN |
503 | CPS SERWA |
504 | All Solar based Pumping Stations |
505 | Diesel generating set of respective minimumcapacity including all associated accessories for lighting load At following locations:- |
506 | 62.5 KVA at Aleti Headworks & RWPS Aleti |
507 | 25 KVA atRD 74 Km RWPS |
508 | 5KVA at IPS BAMARALA |
509 | 5KVA at IPS PHAGALIYA |
510 | 5KVA at IPS SOBHALA DARSHAN |
511 | 5KVA at CPS SATA |
512 | 5KVA at CPS FAKIRON KA NIWAN |
513 | 5KVA at CPS SERWA |
514 | Supply and erection of Octagonal pole of following length and dimension as per table-3 with base plate on the cement concrete foundation of M-15 /M-20 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (IS 1367 P III ). The pole shall be made of S-355JO grade steel sheet , folded lengthwise to obtained Octagonal shape, having single longitudinal seam weld and hot dipped galvanised internally & externally in accordance with IS 2629. The pole shall have a weatherproof flush door and locking arrangements. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning. |
515 | 7 Mtr. |
516 | P/ F IP-65/ IP-66 protected street light luminaries on existing bracket. Fixture made from powder coated single piece pressure die cast aluminum housing with heat dissipation fins on housing with high power LEDs . Diffuser / glass cover for ensuring IP-65 protection for lamp and control gear compartment, system lumen output of 100 lum/watt high power LED. Integrated driver shall be high efficiency having efficiency more than 85 % and in compliance to IEC standards. System life of 50000 burning Hours with 70 % of initial lumens maintained. Fixture shall be in CE compliance. LED street light fixture 150 watt |
517 | RD 74 Km RWPS |
518 | Aleti HEAD WORKS |
519 | RWPS at Aleti |
520 | IPS BAMARALA |
521 | IPS PHAGALIYA |
522 | IPS SOBHALA DARSHAN |
523 | CPS SATA |
524 | CPS FAKIRON KA NIWAN |
525 | CPS SERWA |
526 | All Solar based Pumping Stations |
527 | BILL 5- Instrumentation |
528 | Setting up of Master Control Station (MCS) : Complete Automization, PLC and SCADA system including central processing unit, memory unit, Input/Output modules, requisite hardware and software, Communication system, Instrument Control Panel (I.C.P.) / Control Desk, (MMI) consisting of required Personal Computers with colour monitors, printers, UPS, all transducers and transmittersetc. SCADA software and its installation with required software, complete in all respect including air conditioners at WTP AletiAdministrative Buildingas per General and Particular Specifications and Employer"s requirement |
529 | Setting up of Local Control Station (LCS): Complete Automization, PLC and SCADA system including central processing unit, memory unit, Input/Output modules, requisite hardware and software,Instrument Control Panel (I.C.P.) / Control Desk, MMI), consisting of one Personal Computer with printers, UPS, all transducers and transmitters, communication or internet Systemetc. SCADA software and its installation with required software complete in all respect at following locations as per General and Particular Specifications and Employer"s requirement |
530 | RD 74 Km RWPS |
531 | Aleti HEAD WORKS |
532 | RWPS at Aleti |
533 | IPS BAMARALA |
534 | IPS PHAGALIYA |
535 | IPS SOBHALA DARSHAN |
536 | CPS SATA |
537 | CPS FAKIRON KA NIWAN |
538 | CPS SERWA |
539 | AT BARMER |
540 | At CHOUHTAN |
541 | Setting of remote Station and instrumentation control panel including all necessary hardware and software, instrumentation and control cable of LT power Cabling, LT Panel, Battery backup and UPS with 2 hrs battery backup complete for transferring the data as well as operation and control through SCADA of Flow Control Valves from Local/Master control Station (These are such where power connection is going to be available viz. near inlet of ESR having FCV). |
542 | Setting of remote Station including all necessary hardware and software, instrumentation, with solar power system, Battery backup complete for transferring the data to LCS and MCS (These are such where power connection is not going to be available viz. near inlet of ESR not having FCV plus Village Transfer Chambers & solar PS CWR). |
543 | Providing, Installation, testing, commissioning of Following Instrument as per Employer requirement and Specifications:- |
544 | for the WTP |
545 | Ultrasonic flow meters with transmitterfor inlet and outlet channels with all accessories |
546 | Bulk flow meters for air pipe and wash water pipe with all accessories |
547 | Mechanical flow measuring system withall accessories at the parshall flume |
548 | Ultrasonic type level sensor, transmitter with switch in the sump for atomisation of backwash pump. |
549 | Ultrasonic type level sensor,transmitter with level switch in backwash tank for atomisation of backwash pump |
550 | External cage type magnetic level sensors, transmit orwith switches in all solution tanks of Alum/PAC, lime and sludge thickening compound for automisationof dosing pumps |
551 | Sensors , Transmitter forDifferential Head across Filter Beds |
552 | PH meter with transmitterfor continuous monitoring at inlet and outlet |
553 | Continuous turbidity meter withtransmitter at inlet and outlet |
554 | Continuous Residual Chlorine sensorwith transmit or at the outlet |
555 | Portable pH meter, Chlorine Sensor and turbidity meters |
556 | IACC Panel with a automation components such as PLC and associated Digital Input/output subsystems, power supply unit, switches, indicators etc., along with Local SCADA Systemat following locations:- |
557 | RD 74 Km RWPS |
558 | Aleti HEAD WORKS |
559 | RWPS at Aleti |
560 | IPS BAMARALA |
561 | IPS PHAGALIYA |
562 | IPS SOBHALA DARSHAN |
563 | CPS SATA |
564 | CPS FAKIRON KA NIWAN |
565 | CPS SERWA |
566 | at BARMER |
567 | At CHOUHTAN |
568 | Control cables, cable trays, support, Accessories, Glands, Work tocompletein all respectat following locations:- |
569 | RD 74 Km RWPS |
570 | Aleti HEAD WORKS |
571 | RWPS at Aleti |
572 | IPS BAMARALA |
573 | IPS PHAGALIYA |
574 | IPS SOBHALA DARSHAN |
575 | CPS SATA |
576 | CPS FAKIRON KA NIWAN |
577 | CPS SERWA |
578 | at BARMER |
579 | At CHOUHTAN |
580 | UPS / Invertors with 2 hrs battery backup to supply power to all Instrumentation system, completeat following locations:- |
581 | RD 74 Km RWPS |
582 | Aleti HEAD WORKS |
583 | RWPS at Aleti |
584 | IPS BAMARALA |
585 | IPS PHAGALIYA |
586 | IPS SOBHALA DARSHAN |
587 | CPS SATA |
588 | CPS FAKIRON KA NIWAN |
589 | CPS SERWA |
590 | BARMER CR |
591 | CHOUHTAN CR |
592 | Solar based Pumping Stations |
593 | Pressure Gauges at individual delivery and Headerat following Pumping Stationlocations:- |
594 | RD 74 Km RWPS |
595 | Aleti HEAD WORKS |
596 | RWPS at Aleti |
597 | IPS BAMARALA |
598 | IPS PHAGALIYA |
599 | IPS SOBHALA DARSHAN |
600 | CPS SATA |
601 | CPS FAKIRON KA NIWAN |
602 | CPS SERWA |
603 | Solar based Pumping Stations |
604 | Ultrasonic level indicators with Sensor andSwitches atsump,Pressure Sensors, Transmitters andSwitches on delivery header, Temperature sensors with transmitterfor motors, with all required components and associated erection hardware as well as accessories as per the requirements at following Pumping Stationlocations:- |
605 | RD 74 Km RWPS |
606 | Aleti HEAD WORKS |
607 | RWPS at Aleti |
608 | IPS BAMARALA |
609 | IPS PHAGALIYA |
610 | IPS SOBHALA DARSHAN |
611 | CPS SATA |
612 | CPS FAKIRON KA NIWAN |
613 | CPS SERWA |
614 | FOR RESERVOIRS |
615 | Ultrasonic Level Indicator, transmitter, Sensor with all required components and associated erection hardware as well as accessoriesat following CWR locations:- |
616 | RWPS |
617 | Aleti HEAD WORKS |
618 | IPS BAMARALA |
619 | IPS PHAGALIYA |
620 | IPS SOBHALA DARSHAN |
621 | CPS SATA |
622 | CPS FAKIRON KA NIWAN |
623 | CPS SERWA |
624 | Ultrasonic Level Indicator, transmitter, Sensor with all required components, with solar power supply & battery backup system and associated erection hardware as well as accessoriesat following ESR/CWR locations:- |
625 | AT all ESRs |
626 | AT all solar powered PS CWRs |
627 | Electro-magnetic flow meters, transmitter, flow Integrator ( Digital display in Instrument Panel in Control Room) with required specials, fittings, supports etc.. complete in all respectof following NB:- |
628 | 100 mm dia |
629 | 125 mm dia |
630 | 150 mm dia |
631 | 200 mm dia |
632 | 300 mm dia |
633 | 350 mm dia |
634 | 400 mm dia |
635 | 450 mm dia |
636 | 500 mm dia |
637 | 700 mm dia |
638 | 700 mm dia |
639 | 900 mm dia |
640 | 1000 mm dia |
641 | 1200 mm dia |
642 | Battery Operated Woltman type In-Line flow meters with GSM/GPRS based communication model, battery with accessories, fittings, valves (upstream and downstream to the Flow meter), dismantling joints, Air valves, specials, pressure gauge, anchor block, supports,complete in all respect at all VTC (Size of flow meters shall vary from 80mm to 200 mm as per minimum flow velocity requirement of flow meter) |
643 | Electronic Sound level Meter, Electronic virabation meter & Electronic Temparature meter and any other instuments/items/tools required for smooth running & daily monitoring/ routine maintenance of pump motors/headworks other than specified in BOQ. |
644 | RD 74 Km RWPS |
645 | Aleti HEAD WORKS & RWPS Aleti |
646 | RWPS at Aleti |
647 | IPS BAMARALA |
648 | IPS PHAGALIYA |
649 | IPS SOBHALA DARSHAN |
650 | CPS SATA |
651 | CPS FAKIRON KA NIWAN |
652 | CPS SERWA |
653 | BILL 6- VILLAGE DISTRIBUTION |
654 | Survey, Design, Construction, Testing, Commissioningof circular RCC Clear Water reservoirs includingDI D/F inlet with manually operated Sluice Valve, dismantling joints, outlet with flange and blind flange, overflow with requiredpiping up to thechamber and up to storm water drain, washout pipe with sluice valves, construction of chambers complete in all respect of various capacitiesfor village Distribution as per Employer requirement and General Specification |
655 | 20 KL to 100 KL |
656 | 101 to 200 KL |
657 | 201 to 300 KL |
658 | Providing, installation, testing and commissioning of AC submersible/ monoblock pump sets with HDPE/GI/MS/DI pipe fittings andindividual solar pump controller (1w+1s)with Maximum power point tracking (MPPT) for optimally use the solar panel and maximize water discharge to deliver maximum water during the day including PVC flat submersible cable from controller to motor pumps. Solar pumpshall be of Stainless steel construction and performance shall be as per scope of work and minimum lift of water shall be as per defined in scope. Pump controller shall have Adequate protection against dry operation of motor pump set, and against hails and storms. Full protection against open circuit, accidental short circuit and reverse polarity should be provided. A good reliable on/off switchbe provided. The cable shall be ISI marked three core PVC flat submersible cableas per IS 694:1990 or amended up to date ( standard insulation) and conductor as per class 5 of IS 8130:1980 or amended up to date. The entire work shall be executed as per technical specification and direction of Engineer in charge. |
659 | up to 5 HP |
660 | 5 HP to 7.5 HP |
661 | 7.5 HP to 10 HP |
662 | 2.17/Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB, DOL starter, overload relay, ampere Mtr, volt Mtr, phase preventer,phase indicators, lighting arrangement etc complete suitable for three phase pump Set. The panel should have space for energy Mtr ( supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 gauge M.S. Sheet with powder coating. Panel should be ofminimum size 900 x 600 x 300mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18" and double door including in built locking system.The legs should be embedded in M-15 cement concrete platform. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level.The panel should have opening of suitable size in front of space for energy Mtr with glass for Mtr reading. The operation of panel should be suitable for on 440 Volt AC Supply. |
663 | Up to 5.00 HP |
664 | 2.18/Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay,ampere Mtr with CTs, volt Mtr, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc. complete suitable for three phase pump Set. The panel should have space for energy Mtr ( supplied by DISCOM).All these equipments shall be housed by panel box made out from 18 gauge M.S. Sheet with powder coating. Panel should be ofminimum size 900 x 600 x 450 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18" and double door including in built locking system.The legs should be embedded in M-15 cement concrete plat form. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy Mtr with glass for Mtr reading. The operation of panel should be suitable for on 440 Volt AC Supply. |
665 | Above 5 HP and up to 20 HP |
666 | Supply & Fixing of ISI marked three core PVC flat submersible cableas per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980including making connection etc. |
667 | 3 core 4.0 Sq.mm |
668 | Supply, installation, testing and commissioning ofMNRE approved off GridSolar Panels for running of motor pumps with 25 years of Linear Generation warranty, Work includes designing of solar panel area, MS fabricated structure 120 micron hot dip galvanized iron, fencing, showing arrangement of panel in available space and installation ofPV module on frame structure such that minimum height of lower edge of panel shall be 4.0 mtr from ground level to safeguard against damage and theft as per indicative drawing enclosed with the bid document. The foundation of structure shall be in RCC. Mountingstructure shall be suitably designedto withstand wind velocity up to 150km/hr. The work shall be executed as perdetailedtechnical specifications, approved drawing and direction of Engineer in Charge. Note: There shall be 5 year service warranty for solar panel and mounting structureandsuitable provision shall be included in tender document. |
669 | Construction of Pump House in Stone/Brick Masonry of min. 2.5m x 2.5m size,pump house buildingto accommodate SOLARpump & panel & controller sets,with associate Electrical / Plumbing work. Thisshall includeCivil works required for erection of chainpulley and Supply & fixing of chanipulley 2MT,installation of pumps and panels, cable trenches, drainage, access platforms, ladders, thrust/anchor blocks, pipe supports, Pipes and specials, rain water harvesting & collectionsystem for rain water frompump house roofto thesumpcomplete in all respect as per employer"s requirement and Specifications at following location |
670 | Providing service connection as per technical specification and standard drawing as per relevant IS code (amended up to date) from all kind of water mains up to consumer Mtr/premises (Complete job).This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil (muram/soft rock/hard rock) including demolishing of cement concrete,WBM, Black top etc. of all thickness; cutting of CC road/jhiri by using a concrete cutter machine; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 50 Mtr ; providing & fixing of all fittingusing PP mechanicalIntegrated saddle with inbuilt flow control valve made out of SS316 designed for 5 LPM discharge at 0.5 bar pressure , notexceedingtheflowof7LPMat2barandacompressionelbow, moulded in single piece/ fusion welded (Complete job). providing & fixing of all fitting duly approvedinaccordancewith specificationforpotablewaterincluding GMFull-wayValve(IS:778Mark)orwheelvalveandspecialswith20 mmnominaldiaMDPEpipePE 80PN16asperISO4427/20mm nominaldia PPR-C (Three layered) pipe PN16SDR 7.4 (IS:15801:2008) (ISImark)andabovegroundlevelusingPPR-CpipewithstandardPPR fittings/ GI pipes in the premises for fixing a tap. P&F a Bib Cock (IS : 8931 Mark) superior quality Brass 400 gm,15 mm nominal bore including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . In addition to the ferrule, an orifice of 4.0 mm dia should also be provided in the service line at the entry point of the consumer"s property in such a way that it should be accessible for inspection to VWSC, PHED and any other authority which would like to inspect as and when required. The service line should be laid at least 45 cm below ground level, except in case of concrete/bituminous roads where minimum depth shall be 20 cm. Including Road cutting for house hold service connection in minimum trench width wherever road crossing is required. Road cutting of cement concrete,WBM, Black top etc. of all thickness shall be doneby using a concrete cutter machine keeping minimum trench width and restoration of the road with Cement concrete with PCC M-10 and CC M-30 grade as per specification and direction of Engineer in charge.The raw material shall be virgin PE 80 Blue compound and comply with the requirements of ISO/Directive of testing material : 9080 with minimum required strength of 8 Kg/sq.cm. The raw material shall be Food grade quality.Pressure rating shall be 12.5 Bar. The pipes shall bear ISO marking. |
671 | Average length up to 05 mtr 20 mm dia MDPE pipe/ 15 mm GI class B pipe |
672 | Extra length of 20 mm MDPE pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. |
673 | BILL 7 - Civil AND ANCILLARY WORKS |
674 | Construction of Office Building (Minimum Area 1830 Sqft) with furniture including air conditioners as per Employer requirement, Specification and tender drawings. |
675 | Construction of J-2 Type Set (Twin quarter) at various headworks as per Employer requirement, Specification and tender drawings |
676 | Construction of Engineer residence including air conditioners as per Employer requirement, Specification and tender drawings |
677 | Campus area Development Works bylandscaping, Horticulture, Drainage, External campus lightingetc and any other item other than specified in BOQ. as per Employer requirement and Specification at following Campuses:- |
678 | RD 74 Km RWPS |
679 | Aleti HEAD WORKS |
680 | IPS BAMARALA |
681 | IPS PHAGALIYA |
682 | IPS SOBHALA DARSHAN |
683 | CPS SATA |
684 | CPS FAKIRON KA NIWAN |
685 | CPS SERWA |
686 | Construction of Boundary wall, installation of MSGates (Man and Animal Obstruct with Minimum Weight 450 Kg ) and Approach Roads as per Employer requirement and Specification for various PS head works, ESR campuses, VD CWRs etc. |
687 | Boundary Wall |
688 | MS Gates |
689 | Cement Concrete roads within campuses |
690 | Gravel roads for approach to ESRs |
691 | Construction of HT/ LT/ switchyard panel Room with all facilities (Minimum plinth area 25 Sqmtr) asper Employer requirement and Specification |
692 | Construction of Store builindg with all facilities (Minimum Area 50 Sqm with on side Kota stone shelves 1.0m deep from top to ground level on a long wall) as per Employer requirement and Specification |
693 | Construction of Local Control Station with all facilities (LCS) building of minimum 30 sqm area complete in all respect including air conditionersas per Employer requirement and Specificationat Barmer & Chouhtan |
694 | Construction of Village Transfer chamber (VTC)complete in all respect as per the tender drawing,complete in all respect as per Employer requirement and Specification. |
695 | BILL 8 - SPARE PARTS, TOOLS AND TACKLES |
696 | Supply of spares for mechanical works for all pumping stations as per scope of work and specifications given. |
697 | Supply of spares for electrical works for all pumping stations as per scope of work and specifications given. |
698 | Supply of spares for instrumentation works as per scope of work and specifications given. |
699 | Supply of spares for pipeline works as per scope of work and specifications given. |
700 | Supply of tools and tackles as per scope of work and specifications given. |
701 | Supply of retractable aluminum ladder 4.5m length at all PS |
702 | BILL 9 - PRICE SCHEDULE-OPERATION & Maintenance SERVICE(SECTION II) |
703 | OPERATION & MAINTENANCE SERVICE AFTER DEFECTS LIABILITY/NOTIFICATION PERIOD OF ONE YEAR |
704 | Operation and Maintenance (AFTER DEFECTS LIABILITY/NOTIFICATION PERIOD OF ONE YEAR) ofPipeline up to VTC, CWRs, ESRs, pump houses,WTP, EMI Works, include all type of materials/chemicals/fuel (disinfactant/chlorine gas, & coagulant/PAC/Alum, etc) required for O&M service,Electro chlorinators at pumping stations etc of the whole WSS system/works (except Jdvvnl electricity bill /charges & WRD canal water bill/ charges ) as per Employer requirement and Specification for:- |
705 | 1st Year |
706 | 2 rd Year |
707 | 3 rd Year |
708 | 4 th Year |
709 | 5 th Year |
710 | 6 th Year |
711 | 7 th Year |
712 | 8 th Year |
713 | 9 th Year |
714 | 10 th Year |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail