Tender For Dens Construction Work From Shankar Medical Store To Parsi Aid In Ward No. 17 In Nagar Panchayat Budhana
Tender Value
16.80 Lakhs
Estimated cost
Bid Submission
06 Sep 2023
0 days left
EMD
1.68 Lakhs
Bank guarantee accepted
Document Fee
1888
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
budhana → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Dens Construction Work From Shankar Medical Store To Parsi Aid In Ward No. 17 In Nagar Panchayat Budhana
BOQ
| Sl. No. | Item Description |
| 1 | Scraping old painted surface including disposal of all scraped material to a distance of 30 meters (100 ft.) as directed by Enginer-in-charge. For small area for big area as per MORTH or MORD Sl.No. 772 |
| 2 | Disposal of malba lead 2 km (same as item No 1)Ch 3 Sl.No. 231(a) |
| 3 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. |
| 4 | Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means. |
| 5 | Providing and applying tack coat with bitumen VG-10 using Bitumen pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. |
| 6 | Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per centby weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 507 complete in all respects. |
| 7 | Providing and applying tack coat with bitumen VG-10 using Bitumen pressure distributor at the rate of 0.2 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. |
| 8 | Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5per centof mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 508 complete in all respects |
| 9 | M-150 Brick Work in 1:4 (One Cement and Coarse Sand) Mortar in Foundation And Plinth including supply of All materials and labour, Tools and plants etc. required for proper completion of work as per SI No. 307 |
| 10 | 12 mm thick plaster with cement and coarse sand of 1.25 fineness modules in 1:4 over brick work minimun thickness not to be less than 1 cm including supply of all materials, labour , tools and plants etc. requred proper completion of the work asper SI No. 13.07 (584a) |
| 11 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC: 35. The finished surface to be level uniform and free from streaks and holes. (SI. New Item No. 8) complet as per sepecifications. |
| 12 | Reflective Raised Pavement Marker with shanks Providing and fixing of raised pavement markers with twin shanks of adequate length anchored with epoxy / bitumen adhesive of approved make(Cat Eye) Type x-ASTMD-4956-04 Avery Dennision/3m(USA Make) having moulded body of polycarbonate, ASA, HIPS or ABS able to support a load of 13.635 M.T. tested in accordance with ASTMD 4280 type H and other requirement mentioned in MoRT&H Circular, its reflective lens made of micro prismatic lens (capable of providing total internal reflection of light), electronically welded to the body. The length, height and width of the body shall not exceed 130 mm, 20 mm and 105 mm respectively, The area of each reflective surface shall not be less than 13 Sq. cm . on each side sloping at the angle of 35 + 5 degree to the base to ensure maximum reflectively. it shall comply to specification of Category A of MoRT&H circular no. RW/NH 33023/10/97-DO-III dated 11.06.97 lenses shall be moulded of methyl methecrylate conforming to ASTMD 788 or equivalent. With 7 years warranty. Rate shall be inclusive of all taxes, royalty,etc. etc. All T&P/ machine material and labour required for proper completion of work.Ch 27 new item |
| 13 | supply & fixing of inogration signs board at site . |
| 14 | GST 18% |
AI Tender Summary
Tender Timeline
Aug 19, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedSep 06, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 06, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender