Tender For Providing Furniture Work Bhaktniwas Shri Kshtra Chintamani Devstha At- Theur Tal Haveli Dist - Pune, pune-Maharashtra

Providing Furniture Work Bhaktniwas Shri Kshtra Chintamani Devstha At- Theur Tal Haveli Dist - Pune- 1 Item No. : 1 Providing And Fixing In Position Gypsum Board False Ceiling With 12.5 Mm Thick Gypsum Boards, Screwed / Fixed To The Under Structure Of Suspended G.I. Grid Constructed And Suspended From The Main Ceiling Consisting Of Ceiling Sections Of Size 25 X 50 Mm Maximum Center To Center Distance Of 600 Milimetre Perimeter Channel And Intermediate Channels At Maximum Center To Center Distance 1200 Milimetre Galvanized Grid Should Be Fixed To Reinforced Cement Concrete Slab. The Gypsum Board Should Be Fixed To Galvanized Iron Grid With Necessary Screws. The Boards Should Be Taped And Filled From Underside To Give Smooth, Seamless Ceiling. The Rate Should Include Necessary Additional Ceiling Sections And Intermediate Channels.Additional Intermediate Channels Should Be Fixed To Strap Hangers For Additional Support To Prevent Strapping At Every 1200 Milimetre Item To Be Completed In All Respect Including Necessary Sleeves For Ducts Finishing Of Joints Cut Outs, Painting Including Labour, Material, Lifts Etc. All Complete..... ( Ino38-51 , Pgno 243 ) ( State Dsr ) Item Spec: ( As Directed By Engineer In Charge. ) & ( ) 2 Item No. : 2 Single Bed @ 2025Lx 1000Dx 650Hproviding And Fixing Single Bed Of Size 2025Lx1000dx650hwith Matress And Pillow. Understructure: - The Legs Are Made Of Square Tube Of Size 25 X 25Mm Made Out Of Ms With A Thickness Of 1.2 Mm. The Legs Should Have Corner Brackets Welded To It At Two Levels. The Corner Brackets Are Made Of 2Mm Thick Crca Having A L Shaped Structure To Join The Side Panels And Headboard To The Leg. Three Nos. Of Horizontal Stiffeners Are Provided At Equal Intervals. The Stiffeners Are Made Of Square Tube Of Size 25 X 25Mm Made Out Of Ms With A Thickness Of 1.2Mm. The Middle Horizontal Stiffener Has A Leg Attached To It To Transfer The Load To The Ground And Add To The Strength And Stability Of The Complete Structure. This Leg Is Also Made Of Square Tube Of Size 25 X 25Mm Made Out Of Ms With A Thickness Of 1.2Mm. All Metal Components To Undergo 7 Tank Treatment Process And Should Be Powder Coated To The Thickness Of Minimum 50 Microns Dft. Side Panel: - The Side Panels Are Made Up Of 18Mm Thick Prelam Particle Board With Both Side Decorative Laminate. All Exposed Edges Are Sealed With 2Mm Thick Pvc Edge Banding. The Overall Width Of The Side Panel Is 150Mm. The Side Panels Have 18Mm Thick Prelam Particle Board Baton Running For Required Length To Add Rigidity To The Structure. Head Board :- The Head Board Is Made Up Of 18Mm Thick Prelam Particle Board With Both Side Decorative Laminate. All Exposed Edges Are Sealed With 2Mm Thick Pvc Edge Banding. The Head Board Size To Be Considered As 1000 X 650Mm. Foot Board :- The Foot Board Is Made Up Of 18Mm Thick Prelam Particle Board With Both Side Decorative Laminate. All Exposed Edges Are Sealed With 2Mm Thick Pvc Edge Banding. The Head Board Size To Be Considered As 1000 X 450Mm. Bed Base: - The Bed Base Is Made Up Of 12Mm Thick Prelam Particle Board With Both Side White Laminate. .... ( Ino51-55 , Pgno 366 ) ( State Dsr ) Item Spec: ( As Directed By Engineer -In- Charge ) & ( ) 3 Item No. : 3 Bed Side Table @ 400Lx 400Dx 415Hproviding And Fixing Bed Side Table Of Size 400Lx 400Dx 415H The Bed Side Unit Is Made Up Of 18Mm Thick Prelam Particle Board With Both Side Decorative Laminate. All Exposed Edges Are Sealed With 2Mm Thick Pvc Edge Banding. The Bed Side Table Has One Drawer And One Shelf. The Shelf Is Made Of 18Mm Thick Prelam Particle Board With Both Side Decorative Laminate. All Exposed Edges Are Sealed With 2Mm Thick Pvc Edge Banding.... ( Ino51-58 , Pgno 367 ) ( State Dsr ) Item Spec: ( As Directed By Engineer -In- Charge ) & ( ) 4 Item No. : 4 Wardrobe With Mirror @ 900Lx 600Dx 1965Hproviding And Fixing Wardrobe With Mirror Of Size 900Lx 600Dx 1965H The Wardrobe Side Panels And Doors Are Made Up Of 18Mm Thick Prelam Particle Board With Both Side Decorative Laminate. All Exposed Edges Are Sealed With 2Mm Thick Pvc Edge Banding. The Shelves Are Made Of 18Mm Thick Prelam Particle Board With Decorative Laminate On Both Sides. The Top Is Made Of 36Mm Prelam Particle Board With Decorative Laminate On Both Sides. ( 18Mm Prelam Particle Board And 18Mm Batons On All Sides To Achieve 36Mm Overall Thickness ) . The Exposed Edges Of The Top Are Sealed With 2Mm Thick Pvc Edge Banding. The Top Most Part Of The Wardrobe Has An Aluminum Hanger Rod Of Ebco Make. One Drawer Of Size 400 ( W ) X 150 ( H ) X 450 ( D ) Made Of 18Mm Thick Prelam Particle Board Has Been Considered. The Drawer Will Have A Multipurpose Lock Of Ebco Premium Make. The Wardrobe Handles Are Satin Ss Finish Of 160Mm Pitch. The Wardrobe Has A Multipurpose Lock Of Ebco Make. All Hinges Considered Are Hettich Make. Necessary Good Quality Hardwares Have Been Considered As Required..... ( Ino51-57 , Pgno 367 ) ( State Dsr ) Item Spec: ( As Directed By Engineer -In- Charge ) & ( ) 5 Item No. : 5 Dressing Table @400Lx 400Dx 1800Hproviding & Fixing Dressing Table Of Size 400Lx 400Dx 1800H.The Dressing Table Unit Is Made Up Of 18Mm Thick Prelam Particle Board With Both Side Decorative Laminate. All Exposed Edges Are Sealed With 2Mm Thick Pvc Edge Banding. The Unit Has One Drawer And One Shelf. The Dressing Table Has A Mirror Of 4Mm Thick Pasted On 18Mm Thick Prelm Particle Board Attached To The Base Unit. The Mirror Size Considered Is 1155 X 360 X 4 ( T ) . The Mirror Has Been Pasted Using High Quality 3M Sticker..... ( Ino51-56 , Pgno 367 ) ( State Dsr ) Item Spec: ( As Directed By Engineer -In- Charge ) & ( ) 6 Item No. : 6 Providing And Fixing 3.5 To 4 Mm Thick Veneer Finish Wall Panaling Made Out Of 50 X 25 Mm ( Finished Size ) C.C.T.W. Frame Work Or Size Of 600 X 600 Mm Center Or As Per Site Condition Covered By 6 Mm Thick Marine Plywood Of The Requisite Manufacture Viz Anchore / Century / Kenwood / Duro / Jet Or Equivalent Generally Confiriming To I:S 710- 1980 Finished With 3.5 To 4 Mm Thick Matching Veneer Of Approved Color And In Satin Wallnut Groov Matched Veneer Pattern And Design Including Melamine Polishing & Design With Antitermite Treatment Etc. To Plywood And Woodwork With Ten Years Guarantee Bond Etc. Including All Lead And Lifts Complete As Per Architects Drawing And Instructions Of Engineer Incharge..... ( Ino37-26 , Pgno 232 ) ( State Dsr ) Item Spec: ( As Directed By Engineer In Charge. ) & ( ) 7 Item No. : 7 ExecutiveStable @ 1800Lx900dx750ht Providing & Fixing Of Table @ 1800Lx900dx750ht - Top & Gable End To Be Made Ofmembrane Finish With Soft Water Fall Edges & Curved Panel & Decorated Anodized Section Modesty Panel To Be Made Of 18 Mm Thick Prelaminated Particle Board With Pvc Edge Band As Per Drawing .... ( Ino51-21 , Pgno 355 ) ( State Dsr ) Item Spec: ( As Directed By Engineer -In- Charge ) & ( ) 8 Item No. : 8 Full Height Steel Storage @ 750Lx450dx2100ht Providing And Fixing Openable Steel Storage Of 750 X 450 X 2100Ht, With 4 Adjustable Shelves, Complete Body & Shutter Made In0.8 Mm Thick & Topin 2 Mm Thick Crca, 4 Shutter To Be Mounted With The Help Of Cup Hinges, And 4 Adjustable Levelers, Enitre Storage In Powder Coated Finish With 60 To 80 Microns As As Per Drawing..... ( Ino51-37 , Pgno 359 ) ( State Dsr ) Item Spec: ( As Directed By Engineer -In- Charge ) & ( ) 9 Item No. : 9 Multiple Compartment Lockers @ 1140Lx 457D X 1830 Mm. Ht. Providing And Fixing Multiple Compartment Lockers @ 1140Lx 457D X 1830 Mm. Ht. With 12 Compartments , Complete Body & Shutter Made Of Crca Sheet With Powder Coated Finish As Per Approved Color..... ( Ino51-38 , Pgno 359 ) ( State Dsr ) Item Spec: ( As Directed By Engineer -In- Charge ) & ( ) 10 Item No. : 10 Providing & Arrangemnt Of Mid Back, Eco Cts Mechanism , Fixed Armrest , Gaslift For Seat Height Adjustment, Standard 5-Prong P / Nylon Base With Fabric Upholstery .... ( Ino51-43 , Pgno 359 ) ( State Dsr ) Item Spec: ( As Directed By Engineer -In- Charge ) & ( ) 11 Item No. : 11 Providing & Fixingsofa Set 3+1+1 Brown And Cream Leather Dimension Length: 182.5 ( Cms ) Breadth ( Cms ) : 100 ( Cms ) Height ( Cms ) : 100 ( Cms ) Weight ( Kgs ) : 66 ( Kg ) Seating Capacity: Five Seat.... ( Ino51-53 , Pgno 366 ) ( State Dsr ) Item Spec: ( As Directed By Engineer -In- Charge ) & ( ) 12 Item No. : 12 Tea Table 900Mm X 750Mm X 450Mm For M.S. Ante Chamber Providing And Fixing Of Tea Table 900Mm X 750Mm X 450Mm With 12Mm Thick Colour Eitched Tempered Glass With Bevelled Drawing Made Outof 18Mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thik Veneer Or 1 Mm Thik Mica Etc. .... ( Ino51-54 , Pgno 366 ) ( State Dsr ) Item Spec: ( As Directed By Engineer -In- Charge ) & ( ) 13 Item No. : 13 Directional Signage Design, Supply, Fabrication And Fixing Acrylic Multilingual Braille ( Raised Dots ) Directional Signboards Of Size 6 X 9Designed As Per Accessibility Standards And Having 4Mm Thick Acrylic Base Plate With Upper Case San Serif Words Made Of White Acrylic Non Glare Cut Out Letters Of Height 15Mm Raised Not Less Than 0.8Mm Above Base Plate And The Equivalent Word Written In Hindi With Devnagri Non Glare Acrylic Letters Of Height 15Mm Raised Not Less Than 0.8Mm Above Base Plate And Having A Non Glare Acrylic Cut Arrow Pointing In The Required Direction. Each Signboard To Be Fixed As Per Manufacturers Specifications On The Wall At The Approved Location And At A Height Of 1200Mm From Ffl And As Per The Directions By The Engineer In Charge..... ( Ino51-67 , Pgno 370 ) ( State Dsr ) Item Spec: ( As Directed By Engineer -In- Charge ) & ( ) 14 Item No. : 14 Providing & Fixing In Position, Carpetmore Than 800+ Gsm, Made With100% Stain Proof Fibres Of Approved Make Along With 5Mm Underlay As Per Architectural & Acoustical Design & Instructions & Complete In All Aspectsincluding All Materials Labour, Finishing Etc Complete.... ( Ino51-13 , Pgno 354 ) ( State Dsr ) Item Spec: ( As Directed By Engineer -In- Charge ) & ( ) 15 Item No. : 15 Providing And Fixing Rollar Blinds Ami Make Or Approved Make & Shade Of 38Mm Round Aluminium Channel With Blackout Fabric & Telting With Chain ( Ball ) System With All Necessary Fixtures And Fitting Etc. Complete. ( Sample To Be Final By Engineer In-Charge Prior Execution Of Work ) .... ( Ino51-19 , Pgno 355 ) ( State Dsr ) Item Spec: ( As Directed By Engineer -In- Charge ) & ( ) 16 Item No. : 16 Providing And Fixing 48 Mm Thick Oth Veneer Door ( Without Glass ) Made Up Of 18 Mm Thick Commetiol ( Isi 303 ) Plyywood Frame Covered With 12 Mm Thick Commertiol ( Isi 303 ) Ply Wood Both Side Of The Frame To Get Requrd Thickness As Per Architectural Design In Drawing Primium Quality With Grove Edg Finishing 50X10 Mm Btc Liping As Per Drawing Is Fitted By Btc 22X10 Mm Molding Including All Materials Brass Screw Brass Hinges ( 125 X12 Mm ) Mortice Lock Door Stoper Antitermite Tretment To Ply Wood To Coats Malamine Polish To Molding And Lipping Labour Charges As Directed By Engineer Etc Complete..... ( Ino35-28 , Pgno 225 ) ( State Dsr ) Item Spec: ( As Directed By Engineer In Charge. ) & ( ) 17 Item No. : 17 Solid Core Flush Door Single Leaf Providing And Fixing Factory Made Solidcore Flush Door In Single Leaf 35 Mm Thick, Decorative Types, Of Exterior Grade, As Per Detailed Drawings, Conforming To I.S.:2202 - 1962 ( Revised ) With Approved Face Veneers On Both Faces With / Without Glazing And Venetians In The Positions Shown On The Drawings Or As Directed, All Necessary Beads, Moulding And Lipping, Holdfasts, Mat Finish Stainless Steel Fixtures Fastenings , Finishing With French-Polish / Waxing Complete. ( Without Door Frame ) . ( Sample To Be Got Approved From Ex.Engineer Before Use ) Commercial Hard Wood Shutter .... ( Ino51-60 , Pgno 368 ) ( State Dsr ) Item Spec: ( As Directed By Engineer -In- Charge ) & ( ) 18 Item No. : 18 Providing And Applying Pearl / Luster Finish Paint Of Approved Colour And Shade To The Existing Plaster Surface Including Scaffolding, Preparing The Surface, Applying The Acrylic Wall Putti Etc. Complete..... ( Ino35-23 , Pgno 225 ) ( State Dsr ) Item Spec: ( As Directed By Engineer In Charge. ) & ( ) 19 Item No. : 19 Providing And Fixing 900Mm High S.S.304 Grade Stainless Steel Railing With 40Mm Diameter And 1.5Mm Thick At Top, 40Mm Diameter And 1.5Mm Thick Vertical Supports Spaced At 1.5M Center To Center And 8Mm Thick Toughened Glass Including Fabricating , Fixtures, Errecting , Necessary Welding , Grinding , Finishing, Buffing To Stainless Steel Pipe Etc. Complete.... ( Ino40-07 , Pgno 264 ) ( State Dsr ) Item Spec: ( As Directed By Engineer Incharge ) & ( ) 20 Item No. : 20 Providing And Fixing Country Cutteak Wood Partly Veneered And Partly Glazed Partition With 75 Mm X 50 Mm Frame At 60 Cm Center And 9 Mm Thick Commercial Ply On Both Sides, Decorative Veneer Of 4 Mm Thick And Plain Glass 5 Mm Thick, Including French Polishing Etc. Complete.... ( Ino39-70 , Pgno 260 ) ( State Dsr ) Item Spec: ( As Directed By Engineer In Charge. ) & ( ) 21 Item No. : 21 Public Seating Chair. - 3 Seater Providing And Fixing 3 Seater Public Seating Chair Made Of Complete Metal With Legs In Crome Finish And Seates In Silver Powder Coating Finish..... ( Ino51-44 , Pgno 359 ) ( State Dsr ) Item Spec: ( As Directed By Engineer -In- Charge ) & ( ) 22 Item No. : 22 Providing And Laying Cast In Situ / Ready Mix Cement Concrete In M-10 Of Trap / Granite / Quartzite / Gneiss Metal For Foundation And Bedding Including Bailing Out Water, Steel Centering, Formwork, Laying / Pumping, Compacting, Roughening Them If Special Finish Is To Be Provided, Finishing If Required And Curing Complete, With Fully Automatic Micro Processor Based Plc Withoutscada Enabled Reversible Drum Type Mixer / Concrete Batch Mix Plant ( Pan Mixer ) Etc. Complete. With Fine Aggregate ( Crushed Sand Vsi Grade Finely Washed ) .... ( Ino24-01 Ns, Pgno 175 ) ( State Dsr ) Item Spec: ( Bd. E. 1 Page No. 287 ) & ( Ra No. : 1 ) 23 Item No. : 23 Providing And Fixing Heavy Duty Inter Locking Concrete Coloured Paving Blocks Of 60 Mm Thickness Of Having A Strength Of 300 Kg / Sq.Cm. Of Approved Quality And Shape On A Bed Of Crushed Sand Of 25 To 30 Mm Thick Including Skirting Joints And Cleaning Etc. Complete.... ( Ino33-51 , Pgno 218 ) ( State Dsr ) Item Spec: ( A Directed By Engineer In Charge ) & ( ) 24 Item No. : 24 Providing And Fixing Board Displaying Information, Such As Name Of Work, Tender Cost, Name Of Contractor, Work Completion And Liability Period Etc, Having Rectangular Shape Of 1.20M X 0.90M Size Made Out 18 Gauge ( 1.25Mm ) Thick Mild Steel Sheet Painted With One Coat Of Zinc Chromate Stoving Primer And Two Coats Of Enamel Paint On Front Side And Grey Stove Enamel On Back Side And Border / Messages / Symbols Etc. With Approved Colour Shade Paint Complete, On M.S.Angle Of Size 35 X 35 X 3 Mm Frame With Properly Cross Braced M.S. Angles Of Size 35Mmx35mmx3mm Duly Painted Including Two M.S. Angle Iron Posts Of Size 65 Mm X 65 Mm X 6 Mm, 3.65 M Long Painted With Alternate Black And White Bands Of 25 Cm Width Including All Fixtures Etc.And Fixing The Boards In 1:4:8 Concrete Block Of Size 60 Cm X 60 Cm X 75 Cm Including, Excavation, Refilling, Transportation, And Labour Etc Complete. Spec. No. As Directed By Engineer In Charge.... ( Ino6-36 , Pgno 60 ) ( State Dsr ) Item Spec: ( Morth 801 ) & ( ) 25 Item No. : 1 Concrete Compressive Strength Of C.C. Cube ( Set Of 3 Cubes ) ..... ( Ino19-Vqc , Pgno 584 ) ( State Dsr ) Item Spec: ( As Per Standard Specification ) & ( ) 26 Item No. : 2 Concrete Paving Blocks Compressive Strength , Water Absorption, ( Set Of 8 Blocks ) .... ( Ino26-Vqc , Pgno 584 ) ( State Dsr ) Item Spec: ( As Per Standard Specification ) & ( )

INR 1180 /-

INR 50738.0 /-

INR 50.73 Lakhs /-

Name of Work: Providing Furniture workBhaktniwas Shri Kshtra Chintamani Devstha At- Theur Tal HaveliDist - Pune

Sl. No.	Item Description
1	ITEM NO. : 1 Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. ....(INo38-51 , PgNo 243) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & ()
2	ITEM NO. : 2 Single Bed @ 2025LX 1000DX 650HProviding and fixing Single Bed of Size 2025Lx1000Dx650Hwith matress and pillow. Understructure: - The legs are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Three nos. of Horizontal stiffeners are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. The middle Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. This leg is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT. Side Panel: - The side panels are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The overall width of the side panel is 150mm. The side panels have 18mm thick prelam particle board Baton running for required length to add rigidity to the structure. Head Board :- The head board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 650mm. Foot Board :- The foot board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 450mm. Bed Base: - The Bed Base is made up of 12mm thick Prelam Particle Board with both side White laminate. ....(INo51-55 , PgNo 366) ( STATE DSR ) Item Spec: (As directed by Engineer -in- Charge) & ()
3	ITEM NO. : 3 Bed Side Table @ 400LX 400DX 415HProviding and Fixing Bed Side Table of size 400LX 400DX 415H The bed side unit is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The bed side table has one drawer and one shelf. The shelf is made of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding....(INo51-58 , PgNo 367) ( STATE DSR ) Item Spec: (As directed by Engineer -in- Charge) & ()
4	ITEM NO. : 4 Wardrobe with Mirror @ 900LX 600DX 1965HProviding and Fixing Wardrobe with Mirror of size 900LX 600DX 1965H The wardrobe side panels and doors are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The shelves are made of 18mm thick Prelam Particle Board with decorative laminate on both sides. The top is made of 36mm prelam particle board with decorative laminate on both sides. (18mm Prelam Particle board and 18mm batons on all sides to achieve 36mm overall thickness). The exposed edges of the top are sealed with 2mm thick PVC edge Banding. The top most part of the wardrobe has an aluminum hanger rod of EBCO make. One drawer of size 400(W) x 150(H) x 450 (D) made of 18mm thick prelam Particle Board has been considered. The drawer will have a multipurpose lock of EBCO premium make. The wardrobe handles are Satin SS finish of 160mm pitch. The wardrobe has a multipurpose lock of EBCO make. All hinges considered are Hettich make. Necessary good quality hardwares have been considered as required.....(INo51-57 , PgNo 367) ( STATE DSR ) Item Spec: (As directed by Engineer -in- Charge) & ()
5	ITEM NO. : 5 Dressing Table @400LX 400DX 1800HProviding & Fixing Dressing Table of size 400LX 400DX 1800H.The Dressing table unit is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The unit has one drawer and one shelf. The dressing table has a mirror of 4mm thick pasted on 18mm thick prelm particle board attached to the base unit. The mirror size considered is 1155 x 360 x 4(t). The mirror has been pasted using high quality 3M sticker.....(INo51-56 , PgNo 367) ( STATE DSR ) Item Spec: (As directed by Engineer -in- Charge) & ()
6	ITEM NO. : 6 Providing and fixing 3.5 to 4 mm thick Veneer finish wall Panaling made out of 50 x 25 mm (finished size) C.C.T.W. frame work or size of 600 x 600 mm center or as per site condition covered by 6 mm thick marine plywood of the requisite manufacture viz Anchore / Century / Kenwood /Duro / jet or equivalent generally confiriming to I:S 710- 1980 finished with 3.5 to 4 mm thick matching Veneer of approved color and in satin wallnut groov matched veneer pattern and design including melamine polishing & design with antitermite treatment etc. to plywood and woodwork with ten years guarantee bond etc. including all lead and lifts complete as per Architects Drawing and instructions of Engineer Incharge.....(INo37-26 , PgNo 232) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & ()
7	ITEM NO. : 7 Executive"sTable @ 1800Lx900Dx750HT Providing & Fixing of Table @ 1800Lx900Dx750HT - TOP & GABLE END to be made ofMembrane finish with soft water fall edges & curved panel & Decorated Anodized section MODESTY PANEL to be made of 18 mm thick Prelaminated particle board with PVC edge band as per drawing ....(INo51-21 , PgNo 355) ( STATE DSR ) Item Spec: (As directed by Engineer -in- Charge) & ()
8	ITEM NO. : 8 Full Height Steel Storage @ 750Lx450Dx2100HT Providing and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable shelves, Complete body & shutter made in0.8 mm thick & Topin 2 mm thick CRCA, 4 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing.....(INo51-37 , PgNo 359) ( STATE DSR ) Item Spec: (As directed by Engineer -in- Charge) & ()
9	ITEM NO. : 9 Multiple Compartment Lockers @ 1140Lx 457D x 1830 mm. Ht. Providing and fixing Multiple Compartment Lockers @ 1140Lx 457D x 1830 mm. Ht. with 12 Compartments , Complete body & shutter made of CRCA Sheet with powder coated finish as per approved color.....(INo51-38 , PgNo 359) ( STATE DSR ) Item Spec: (As directed by Engineer -in- Charge) & ()
10	ITEM NO. : 10 Providing & Arrangemnt of Mid Back, ECO CTS Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Fabric Upholstery ....(INo51-43 , PgNo 359) ( STATE DSR ) Item Spec: (As directed by Engineer -in- Charge) & ()
11	ITEM NO. : 11 Providing & fixingSofa Set 3+1+1 Brown and Cream leather DIMENSION Length: 182.5 (cms)Breadth (cms): 100 (cms)Height (cms): 100 (cms) Weight (kgs): 66 (Kg) Seating Capacity: Five Seat....(INo51-53 , PgNo 366) ( STATE DSR ) Item Spec: (As directed by Engineer -in- Charge) & ()
12	ITEM NO. : 12 Tea Table 900mm X 750mm X 450mm for m.s. ante chamber Providing And Fixing Of Tea Table 900mm X 750mm X 450mm With 12mm Thick Colour Eitched Tempered Glass With Bevelled Drawing Made OutOf 18mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thik Veneer Or 1 Mm Thik Mica Etc. ....(INo51-54 , PgNo 366) ( STATE DSR ) Item Spec: (As directed by Engineer -in- Charge) & ()
13	ITEM NO. : 13 Directional signage Design, supply, fabrication and fixing acrylic multilingual Braille (raised dots) directional signboards of size 6" x 9"designed as per accessibility standards and having 4mm thick acrylic base plate with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15mm raised not less than 0.8mm above base plate and the equivalent word written in Hindi with Devnagri non glare acrylic letters of height 15mm raised not less than 0.8mm above base plate and having a non glare acrylic cut arrow pointing in the required direction. Each signboard to be fixed as per manufacturers specifications on the wall at the approved location and at a height of 1200mm from FFL and as per the directions by the engineer in charge. ....(INo51-67 , PgNo 370) ( STATE DSR ) Item Spec: (As directed by Engineer -in- Charge) & ()
14	ITEM NO. : 14 Providing & Fixing in position, Carpetmore than 800+ gsm, made with100% stain proof fibres of approved make along with 5mm underlay as per Architectural & Acoustical Design & Instructions & Complete in all aspectsincluding all materials labour,finishing etc complete....(INo51-13 , PgNo 354) ( STATE DSR ) Item Spec: (As directed by Engineer -in- Charge) & ()
15	ITEM NO. : 15 Providing and Fixing Rollar Blinds AMI Make or approved make & shade of 38mm round Aluminium channel with Blackout fabric & telting with chain (Ball) system with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work)....(INo51-19 , PgNo 355) ( STATE DSR ) Item Spec: (As directed by Engineer -in- Charge) & ()
16	ITEM NO. : 16 Providing and fixing 48 mm thick oth Veneer Door (WITHOUT GLASS ) Made up of 18 mm thick commetiol (ISI 303) Plyywood Frame covered with 12 mm thick Commertiol (ISI 303) Ply wood Both side of the frame to get Requrd Thickness as per architectural design in drawing primium quality with grove edg finishing 50x10 mm BTC liping as per drawing is fitted by BTC 22x10 mm Molding including all materials Brass screw Brass Hinges (125 x12 mm) Mortice lock door Stoper antitermite tretment to Ply wood to Coats malamine polish to molding and lipping labour charges as directed by Engineer etc complete.....(INo35-28 , PgNo 225) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & ()
17	ITEM NO. : 17 Solid Core Flush door Single leaf Providing and fixing factory made solidcore flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202 - 1962 (Revised) with approved face veneers on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings , finishing with french-polish/ waxing complete. (without door frame).(Sample to be got approved from Ex.Engineer before use) Commercial Hard Wood shutter ....(INo51-60 , PgNo 368) ( STATE DSR ) Item Spec: (As directed by Engineer -in- Charge) & ()
18	ITEM NO. : 18 Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete.....(INo35-23 , PgNo 225) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & ()
19	ITEM NO. : 19 Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top,40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete....(INo40-07 , PgNo 264) ( STATE DSR ) Item Spec: (As directed by Engineer Incharge) & ()
20	ITEM NO. : 20 Providing and fixing Country cutteak wood partly veneered and partly glazed partition with 75 mm x 50 mm frame at 60 cm center and 9 mm thick commercial ply on both sides, decorative veneer of 4 mm thick and plain glass 5 mm thick, including French polishing etc. complete....(INo39-70 , PgNo 260) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & ()
21	ITEM NO. : 21 Public Seating Chair. - 3 Seater Providing and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish.....(INo51-44 , PgNo 359) ( STATE DSR ) Item Spec: (As directed by Engineer -in- Charge) & ()
22	ITEM NO. : 22 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC WITHOUTSCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade finely washed )....(INo24-01 NS, PgNo 175) ( STATE DSR ) Item Spec: (Bd. E. 1 Page No. 287) & (RA NO. : 1)
23	ITEM NO. : 23 Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete....(INo33-51 , PgNo 218) ( STATE DSR ) Item Spec: (A directed by Engineer in charge) & ()
24	ITEM NO. : 24 Providing and fixing board displaying information, such as "Name of work, Tender cost, Name of Contractor, Work completion and liability period etc", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge....(INo6-36 , PgNo 60) ( STATE DSR ) Item Spec: (MORTH 801) & ()
25	ITEM NO. : 1 CONCRETE Compressive Strength OF C.C. Cube(Set of 3 cubes).....(INo19-VQC , PgNo 584) ( STATE DSR ) Item Spec: (As per Standard Specification ) & ()
26	ITEM NO. : 2 CONCRETE PAVING BLOCKS Compressive Strength , Water Absorption,(Set of 8 Blocks)....(INo26-VQC , PgNo 584) ( STATE DSR ) Item Spec: (As per Standard Specification ) & ()