Tender For Additional /Alternator To Armory Building, Additional /Alternator To Boundary Wall (Ph-Ii) And Additional /Alternator To Unit Shoping Complex At Af Station Wadsar Under Ge (Af) Chiloda
Tender Value
29.70 Lakhs
Estimated cost
Bid Submission
16 Sep 2023
0 days left
EMD
59400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
wadsar → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Additional /Alternator To Armory Building, additional /alternator To Boundary Wall (Ph-Ii) And additional /alternator To Unit Shoping Complex At Af Station Wadsar Under Ge (Af) Chiloda
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-Sep-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-Sep-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames with shutters( with out taking off shutters from the frame) n.exc 1.5 sqm complete all as specified and directed. |
| 2 | Taking down chowkhats or frames with shutters( with out taking off shutters from the frame) exc 1.5 sqm but n.exc 4.00 sqm complete all as specified and directed. |
| 3 | M&L aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92x31.75x1.50 mm, bottom size 92x31.75x1.50 mm and shutter top & bottom of size 40x18x1.50 mm and sides (handle) of size 40x18x1.50 mm and lock side shutter frame of size 40x18x1.50 mm with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 4 mm thick glass with necessary rubber beading gasket etc complete all as specified and as directed by Engr-in-Charge. |
| 4 | S&F aluminium doors, powder coated (of approved colour), with frame of section 100mm x 44mm x 1.50 mm thick and shutter with bottom rail of section 150mm x 44.5mm x 1.50mm thick, middle rail of section 85mm x 44.5mm x 1.50mm thick and top rail of section 80.4mm x 44.5mm x 1.50mm thick and styles of section 80.4mm x 44.5mm x 1.50mm thick with 4.0mm thick glass (plain/ tinted/ with laminated film) or prelaminated board fixed in position with aluminium beading including necessary rubber gaskets and 2 Nos. aluminium push plate handle of aluminium section 150mm wide and 1.50mm thick including 150mm aluminium tower bolt, brass mortice lock complete all as per Drawing No. CEAA/TD/63 sheet No. 2.2 complete all as specified and as directed. |
| 5 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.laid and bedded on pointed on any mortar complete all as specified and directed. |
| 6 | M&L for single piece of green marble slab 15-18 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of Marble slab including moulding,cutting and polishing and nosing and polishing of the free or front edge of the slab window cills etc and including 15mm thick backing coat in CM1:4 complete all as specified and directed by Engineer -in -Charge. |
| 7 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and including 15mm thick backing coat in CM1:6 complete all as specified and directed by Engineer -in -Charge. |
| 8 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and including 10mm thick backing coat in CM 1:4 complete all as specified and directed by Engineer -in -Charge |
| 9 | Demolition of wall of brick and stone wall built in cement mortor incl all quoins, archs, pillars,etc complete all as specified and directed. |
| 10 | M&L for brick work sub class B bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 11 | Taking dawn cement or cement lime plaster any description on brick or stone wall/ celling including raking out joint , haking for key scrubing with water etc complete all as specified and directed. |
| 12 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces or block masonary in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 13 | All as per item No 12 here in before but 5 mm thick in ceiling surfaces CM 1:4 complete all as specified and directed. |
| 14 | M&L for preparation ofnew plastered surface of wall and applying two coats of distemper oil emulsion over a coat of primer and 3mm thick coat ofwall care putty complete all as specified and directed. |
| 15 | M&L for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and directed. |
| 16 | Dismantling of Plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 17 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 18 | Excavating in post holes (or similar holes) each not exc 0.5 Cum in soft/loose soil, getting out, returning fillimg in and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm thick watering and well ramming and removing surplus soil to a distance n, exc 50m and making good surface complete all as specified and directed. |
| 19 | M&L for PCC (1:3:6) type C-2using 40mm graded stone aggregate as in foundation of posts and pillars etc complete all as specified and directed. |
| 20 | S&F for MS framed works as in purline, rafters, column square/rectangular, round or angle section, fixed with and including iron cleats or other connected plates flate iron wind ties etc incl bending of MS section as requriedsuch as grills,gratings, etc. with ends of barsshouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 21 | S&F Pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 22 | Dismantling of RCC fencing post and struts including taking out embeded portion for post embedded in natural ground making good the disturbed portion to requried shape & size for placing new fencing post including any excavation requried complete all as specified and directed. |
| 23 | Dismantling of fencing wire mesh of any type complete all as specified and directed. |
| 24 | Taking down galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings & straining etc. (each line wire to be measured) complete all as specified and directed. |
| 25 | M&L for cement concrete type B2 (1:2:4) using 40 mm graded crushed stone aggregates in post hole complete all as specified and directed. |
| 26 | M&L for hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 27 | Supply only Chain link fencing MS galvansied fencing size 50x50mm and 3.8 mm dia wire complete all as specified and directed. |
| 28 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standars, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. |
| 29 | S&F Galvanised 2 strand steel barbed wire 2.24mm dia, barbed with 2.00 mm dia barbs at 75mm spacing, straining and fixing to any standard rails and straining bolts incl securing or typing at crossing with and provisions of galvanised mild steel wire stapples or steel pins etccomplete all as specified and directed (each line wire to be measured). |
| 30 | S&F mild steel screw bolt (machine made) with hexagonal or square heads at one end and screwed the other each screwed end to be fitted with washersand one hexagonal nut but length of bolt exc. 5cm and n. exc. 10cm long and bolt one side embedded in concrete posts etc complete to fix fencing wire dia of shank 5 to10mm complete all as specified and directed. |
| 31 | M&L for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface complete all as specified and directed. |
| 32 | S&F for galvanised steel punched type concertina coil of 610 mm dia (dia of coil when unstretched with weight 10 kg/coil and average coverage area is 8 RM/coil) and fixed to angle iron post/struts with 3.15 mm dia GI wire complete all as specified and as directed. |
| 33 | Taking down old concertina coil 1050 mm dia wire complete all as specified and as directed. |
| 34 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed. |
| 35 | Demolition of RCC of any description & in any position not otherwise specifically provided for complete all as specified and as directed. |
| 36 | M&L for use and waste of formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Fair finished surfaces of concrete flat complete all as specified and as directed. |
| 37 | M&L for use and waste of formwork to sides of pillars, posts, struts, piers,columns, and stanchions Rough finished surfaces of concrete Circular on plan complete all as specified and as directed. |
| 38 | M&L RCC M-25 design mix using 20 mm graded aggregate in Columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 39 | M&L RCC M-25 design mix using 20 mm graded aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 40 | M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding,welding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed. |
| 41 | M&L Mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed. |
| 42 | M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed. |
| 43 | S&F of steel galvanised punched type concertina coil 1050mm dia when stretched with 80 nos of clip with weight 15.6Kg/coil and average coverage area is 6.00RM per coil complete all as specified and as directed. |
| 44 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 45 | M&L for complete removal of existing treatement of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces complete all as specified and as directed. |
| 46 | M&L for preperation of newly plastered surfaces of wall and applying two coats of cement based over a coat of primer complete all as specified and as directed. |
| 47 | M&L for complete removal of existing treatment of wall and applying two coats of cement based complete all as specified and as directed. |
| 48 | S& F mild steel screw bolt (machine made) with hexagonal or square heads at one end and screwed the other each screwed end to be fitted with washers and one hexagonal nut but length bolt one side embeded in concrete posts etc complete to fix fencing wire dia of shank 11 to 15mm,but length of bolt exc 10cm and n exc 15cm long complete all as specified and as directed. |
| 49 | Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 50 | M&L for Hard core( broken stone or boulders) of guage n exe.63mm deposited, spread and levelled in layers n exe. 150 mm thick watered and rammed to a true surface complete all as specified and directed byEngineer in-charge. |
| 51 | M&L for 75 mm thick PCC type D-2 (1:4:8) (by using 40 mm grade aggregate) as in sub base of floor complete all as specified and directed. |
| 52 | M&L for 25 mm thick PCC type B-1 ( 1:2:4)(by using 12.5mm grade aggregate) as in sub base of floor complete all as specified and directed |
| 53 | M&L for 15 mm thick screed bed or bedding layer of morter for laying floor finishes CM 1:6 complete all as specified and directed. |
| 54 | M&L for vitrified ceranic dark coloured 10 mm thick (square/Rectangular) polished area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 55 | M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey pigment cement and pigments, set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 56 | All as per Item No 55 here in before but as in dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat/ rendering in CM 1:3 for wall finishes complete all as specified and directed. |
| 57 | M&L for granite work (of any type) 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including CM 1:4 10mm thick etc complete all as specified and as directed by Engineer -in -Charge. |
| 58 | M&L for Half brick work sub class B bricks, straight or curved on plan to any radius built in half brick thick wallsCM 1:4 complete all as specified and as directed. |
| 59 | M&L for reinforced cement concrete (nominal mix) Type B-1 1:2:4 (using 20mm garded stone aggregate) as in as beam, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 60 | S&F aluminium anodised grill of 7.00 mm dia squares rectangular triangular circular shape aperture n.exc 7.00cm in length or width fixed with H or F channel make grill No. 20 of décor or equivalent complete all as specified and as directed. |
| 61 | S& F for Steel rolling shutters (1.25m thickness of lath, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,push pull or manual type complete all as specified and as directed. |
| 62 | S&F for safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed. |
| 63 | S&F for 10 mm thick toughned glass as in doors, partitions including hinges, door closer/automatic door closer/floor spring and similar work including cutting to shape, moulding of edge etching design if reqd including locking device and SS handles drilling holes required and necessary fitting for fixing the same complete all as specified and as directed. |
| 64 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed. |
| 65 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 66 | M&L for plate grider or single stanchions, built up of one beam or channel section with flange plates, caps, bases, splices, angle brackets cleats and other connections complete Fe-290(Gde-E-165) complete all as specified and as directed. |
| 67 | M&L for rendering 10 mm thick CM 1:6 and setting coat 5mm thick CM 1:4 mixed with WPC in external surface of wall including scaffolding finished even and smooth without using extra cement complete all as specified and directed . Note:- WPC measured and paid in revalent item of this schedule. |
| 68 | Supply only intergral water proofing compound. |
| 69 | M&L for complete removal of existing treatment of wall surface and applying two coat of distemper oil emulsion over a coat of primer over a sufficient coat ofwall care putty in old surface of wall complete all as specified and as directed. |
| 70 | M&L for cement concrete Type C-2,1:3:6 (40 mm graded aggregate) 75 mm thick as in plinth protection finishes even and fairwithout using extra cement finishing exposed edges fair for rounding and in phase every 2 mtr for length and joint shall be finsihed with bitumen and sand mixtures 1:3 complete all as specified and directed. |
| 71 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directedceiling board with fittings and any description including cover fillets complete all as specified and as directed. |
| 72 | M&L false ceiling at height of 600mm x 600mm x 15mm mineral fibre ceiling tiles RH-99 of type micro looks edge laid on super fine XL 15mm expose d grid systems with 15mm wide T- section flanges. The frame work comprises of main runner of size 15mm x 32mm x 3000mm spaced at 1200mm centre securing fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers (GI wire of 3.0mm dia) to be fixed by approved roof plug, level adjusters and screws etc. The last hanger at the end of each main runner should not be greater than 450mm from the adjacent wall flush fitting 1200mm long cross tees of size 15mm x 26mm x 1200mm to be interloched between main runners at 600mm centers to form a 1200mm x 600mm module. Cut cross tees longer than that 600mm to be supported independently. 600mm x 600mm modules to be formed by fitting 600mm long flush fitting cross tees of size 15mm x 26mm x 600mm centrally between the 1200mm crosstees perimeter wall angle of size 19mm x 19mm x 3000mm secured to wall at 450mm maximum centres. Finally RH-99 mineral fibre tile 15mm thick micro look edge has to be laid on the 600mm x 600mm module complete all as specified and as directed by Engr-in-Charge. |
AI Tender Summary
Tender Timeline
Sep 09, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 16, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedSep 16, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 18, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender