|
| 1 | Earth work excavation above water level in light or sandy or clay soils for infiltration well of 4.50m dia ( internal) including leveling the site and as directed by the departmental officers open well excavation for infiltration well for first depth of 1.00m |
| 2 | Reinforced cement concrete 1:1.5:3 mix using 20mm HBG metal for all RCC items of works excluding cost of reinforcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or Roof slab wherever necessary and bearing surfaces of walls, sides and bottom of the slabs, beams etc., shall be finished smooth with Cement Mortar 1:3, 12mm thick and with Kraft paper without claming etc., as directed by the department officers as per standard specification. |
| 3 | Sinking of infiltration well of 4.50m internal dia and 5.50m external dia below water level including all incidental charges in light or sandy soil. First depth of 2.0m |
| 4 | Sinking of infiltration well of 4.50m internal dia and 5.50m external dia below water level including all incidental charges in light or sandy soil. Second depth of 2.0m |
| 5 | Sinking of infiltration well of 4.50m internal dia and 5.50m external dia below water level including all incidental charges in light or sandy soil. Third depth of 1.0m |
| 6 | Porous concrete in CC 1:4 ( one cement and four hard broken jelly of size 20mm) for steining of infiltration well excluding cost of centering but including curing etc., complete and as directed by the TWAD Board officers. |
| 7 | Brick work in Cement Mortar 1:5 (one cement and five sand ) using Country Bricks ground molded of size 22x11x7 cm for staining of 45cm thick for infiltration well including curing etc., complete. |
| 8 | Centering shuttering including necessary support for plane surface in Foundation and Basement and in all floors using mild steel sheets of size 90x60 cm and 10 gauge stiffened, welded with steel angles of size 25mmx25mm x3mm for boarding laid over silver oak (country wood) joints of 10cm size x6.5cm size spaced at about 90 cm center to center and supported casuarina props of 10 cm to 13 cm dia spaced at 75 cm center to center complete complying with standard specification. for plane surface |
| 9 | Centering shuttering including necessary support for plane surface in Foundation and Basement and in all floors using mild steel sheets of size 90x60 cm and 10 gauge stiffened, welded with steel angles of size 25mmx25mm x3mm for boarding laid over silver oak (country wood) joints of 10cm size x6.5cm size spaced at about 90 cm center to center and supported casuarina props of 10 cm to 13 cm dia spaced at 75 cm center to center complete complying with standard specification.for curved surface curb |
| 10 | Supplying fabricating and placing in position mild steel or ribbed steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc. complete complying with standard specification |
| 11 | Plastering in CEMENT MORTAR 1:4 12mm thick in Including cost and conveyance of materials to site and all other labour charges including etc., as per standard specification. |
| 12 | Plastering in CEMENT MORTAR 1:5 20mm thick in Including cost and conveyance of materials to site and all other labour charges including etc., as per standard specification. |
| 13 | Supply & deliverymanhole cover of size 0.60 x 0.60m ( Heavy duty) with frame |
| 14 | Painting two coat of Plastic emulsion paint over wall plastering surface with best approved first quality of approved colour over the one coat of priming etc., complete complying with standard specification (The paint should be got approved by the departmental officers before use on works ) |
| 15 | Motor & Other WorksProvision for Three phase 20 HP submersible pump set for open well with ISI mark IS 80.34 without panel board (1500 x 40) LPM x m |
| 16 | Supply and fixing of Three phasepanel board |
| 17 | Supply and delivery of 6 Sqm submersible cable |
| 18 | Provision labour charges for erection of20.00 HP submersible pump set. |
| 19 | Light Point Wiringwith 2x1.5 Sq.mm (22/0.3) PVC insulated SC unsheathed Cu. conductor of 1100v grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W. swithc box and 5A F.T. switch with painting of suitable colour for open PVC light / fan point (for electronic regulator) (5 points per coil) SD 18 |
| 20 | Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5 A flush type switch concealed in suitable M.S box in flush with wall SD 130 |
| 21 | Supply and run of 2 of 4 Sq.mm (56/0.3) PVC insulated SC unsheathed Cu. conductor of 1100 V on 7/20 GI bearer wire for service connection mains SD 63. |
| 22 | Supply and fixing of 6 way SPDB of 16A / with 16ADPIC switch of 500V (side handle) with F&N on suitable T.W. board with PWD earthling SD 143 |
| 23 | Pump Room Earth work excavation above water level in light or sandy or clay soils for infiltration well of 4.50m dia ( internal) including leveling the site and as directed by the departmental officers open well excavation for infiltration well for first depth of 1.00m |
| 24 | Cement Concrete 1:4:8 Using 40 mm HBG metal for basement and flooring layers not more than 15cm thick including cost and conveyance of materials to site and all other labour charges including consolidation as perstandard specification. |
| 25 | Filling in the basement with excavated earth in layers of mot more than 15cm thick including watering ramming and consolidation etc., complete as per standard specification. |
| 26 | Supplying and filling in foundation and basement with filling sand layers not more than 15 cm thick well rammed watered and not compacted complete complying with standard specification. |
| 27 | Brick work in Cement Mortar 1:5 (one cement and five sand ) using Country Bricks ground molded of size 22x11x7 cm. Including cost and conveyance of materials to site and all other labour charges as per standard specification. |
| 28 | Reinforced cement concrete 1:1.5:3 mix using 20mm HBG metal for all RCC items of works excluding cost of reinforcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or Roof slab wherever necessary and bearing surfaces of walls, sides and bottom of the slabs, beams etc., shall be finished smooth with Cement Mortar 1:3, 12mm thick and with Kraft paper without claming etc., as directed by the department officers as per standard specification. |
| 29 | Supply and fixing of position reinforced cement concrete precast slab of following thickness with CC 1:2:4 (one cement two sand and four hard broken stone) using 20mm gauge hard broken stone jelly excluding cost of M.S. rods in position but including moulding finishing curing and fixing the precase slabs in shelves cubboards recks plaform manhole cover slab leach pit cover slab etc. complete complying with standard specifications. |
| 30 | Centering shuttering including necessary support for plane surface in Foundation and Basement and in all floors using mild steel sheets of size 90x60 cm and 10 gauge stiffened, welded with steel angles of size 25mmx25mm x3mm for boarding laid over silver oak (country wood) joints of 10cm size x6.5cm size spaced at about 90 cm center to center and supported casuarina props of 10 cm to 13 cm dia spaced at 75 cm center to center complete complying with standard specification. |
| 31 | Plastering in CEMENT MORTAR 1:5 12mm thick in Including cost and conveyance of materials to site and all other labour charges including etc., as per standard specification. |
| 32 | Plastering in CEMENT MORTAR 1:3 10mm thick in Including cost and conveyance of materials to site and all other labour charges including etc., as per standard specification. |
| 33 | Supply and delivery of steel door of size 0.90 x 2.10m in MS angle 40mm x 40mm x 6mm with MS sheet including all charges. |
| 34 | Supplying fabricating and placing in position mild steel or ribbed steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc. complete complying with standard specification |
| 35 | Supplying and fixing of RCC post box type jolly of size 0.60 x 0.45m |
| 36 | Painting two coat of Plastic emulsion paint over one coat of priming etc., complete. |
| 37 | White washing TWO coat using best freshly burnt white shell lime including cost of lime blue powder, fevicol type gums, brushes, scaffolding charges ect.., complete with standard specification. |
| 38 | Finishing the top of roofwith one course of Machine Pressed Tiles of size 20 cm x 20 cm x 2cm of approved quality laid in CEMENT MORTAR 1:3 (one cement and three sand) 12mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar, red oxide, etc., complete complying with standard specification. |
| 39 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \"BB\" for all works in this package} |