New Okhla Industrial Development Authority-NOIDA has published Tender For Development Of Village (Maintenance Of Roads, Drain And Fixing Steel Jaal In Village-Nayabans), Noida. Submission Date for this Tender is 24-08-2023. Road Repair Tenders in noida Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) |
| 2 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 3 | Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). |
| 4 | M-150 Brick work in 1:6 cement & Fine sand 1.25 F.M. mortar in foundation and plinth including supply of all materials, labour and T & P etc required for proper completion of the work. Same as item no.- 305 but in 1:4 one cement & four coarse sand of 2.20 F.M. mortar. |
| 5 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) |
| 6 | Neat cement punning. |
| 7 | S/o Tractror trolly on hire basic with driver, fuel and lubricating oil. |
| 8 | S/o Beldar at site. |
| 9 | Providing and fixing in position 12mm thick bitumen impregnatedfiber board conforming to IS: 1838, including cost of primer, sealingcompound Grade-A in expansion joints. |
| 10 | Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable /recoverable separately. Providing M-30 grade concrete instead of M-25 grade BMC/ RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum) |
| 11 | Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/ccost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
