|
| 1 | BOQ ( Sch \"A\") B/R itemsConstruction of brick masonry Soakage Wells,excavation and earth work in hard/dense soil/disintegrated rock, foundation in PCC 1:3:6 type -C2, wall of honey combed and solid brick work in CM 1:4, RCCcover slab Type-A1 (1:1.5:3) using 20mm graded crushed stone aggregate duly reinforced with 8 mm TMT bar @ 120mm C/C, filling with brick bats, complete of internal size 2.40m x 3m depth complete all as specified and directed and as shown on drawing No TD-309 sheet 1/4 to 4/4. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/ dense soil complete all as specified and directed |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed. |
| 4 | Removing excavated soils to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. |
| 5 | M&L for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc complete all as specified and directed. |
| 6 | M&L for cement concete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in bed to drain pipes of 150/160 mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed. |
| 7 | Material and labourunplasticised PVC pipe 160mm dia type \"B\" with wall thickness 4mm (Min) of pressure rating 4 KN/Sqm laid in trenches and jointed with cement solvent including testing complete all as specified and directed. |
| 8 | M & L for cement concrete 1:4:8 type D-2 (using40mm graded stone aggregate) as in foundation filling and mash concrete complete all as specified and directed. |
| 9 | Material & Labour for brick work with sub class `B’ bricks using old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed. |
| 10 | M&L for brick work with sub class `B’ bricks, straight on plan to any radius as in half brick thick walls, built in CM 1:4 complete all as specified and directed. |
| 11 | Removing excavated soils to a distance exc 250m but n exc 500m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. |
| 12 | Use and waste of formwork to sides and soffits of beams, bands and the like for fair finished flat surfaces of concrete complete all as specified and directed. |
| 13 | M&L for RCC 1:2:4 type B1(using 20mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels and the like complete all as specified and directed. |
| 14 | Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed |
| 15 | M&L for RCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 16 | S & F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 17 | S & F Mild steel TMT bars 5mm dia and over upto 10mm dia as in stirrups, spacers and binders,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified and as directed |
| 18 | M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed |
| 19 | M&L for broken stone or boulders Hardcore of gauge not exc 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and as directed |
| 20 | M&L for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces using WPC where ever requiredas per manufacturerer\"s instructions and finishing the surface even and smooth (without using extra cement) etc.complete all as specified and directed. Note: WPC shall be measured and paid seperately |
| 21 | Supply only WPC complete all as specified and directed. |
| 22 | M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and fair complete all as specified and as directed |
| 23 | S&F steel windows with side hung shutters including box type hinge with steel handle, and steel peg stay including 03 Nos of tower bolt 100mm long in each window, complete without glazing bars, dovetailed or weldedand making good disturbed surface as per existing surface in CM 1:4 complete all as specified and directed. |
| 24 | S&F Steel ventilators with top hung shutters incl hinges steel peg stay complete all as specified and directed. |
| 25 | S&F framed work such as grills,gratings, etc with ends of bars shouldered and / or riveted or forged into spikes; framed guard ; barred iron doors; ladders ; framed balusters; walk ways; railing and simillar work Con-forming to Fe 290 Gde E-165 complete all as specified and directed. . |
| 26 | S&F figured 3mm thick glass pin headed type and glazing with oil putty in square n. exc 0.5 sqm in each pane complete all as specified and directed. |
| 27 | S&F mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with alluminium staple and around all beading complete all as specified and as directed |
| 28 | S&F solid PVC door frame of size 50x47mm made of 5mm plain colour PVC sheet reinforced with MS square tube supply & fixing Sintex Polycon and equivalent complete all as specified and directed. |
| 29 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame work made out of MS tubes for top or bottom rail MS frame shall be covered with heat mouldedplain colour PVC channel having a PVC sheets for strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to stiles and rail with suitable PVC sheets beading and jointedtogether with solvent cement supplying and fixing in the frame at site as specified in cluase No 8.2.1 B.of SSR Part-II 2004 complete all as specified and directed. |
| 30 | S & F aluminium handle, cast type anodized 150mm size complete all as specified and directed. |
| 31 | S & F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed. |
| 32 | S&F Butt hinges medium weight cold rolled mild steel of 100mm long complete all as specified and directed. |
| 33 | M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and directed. |
| 34 | Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all GI Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed. |
| 35 | All as per Item No 34 above but 25mm dia (Bore). |
| 36 | S&F Ball Valves Brass, 25mm dia,quarter turn, femaled threaded, screwed both ends for iron pipe for unions, complete all as specified and directed. |
| 37 | S&F 15mm dia bib taps CP Brass with Capstan head, screweddown, screwed for iron pipe of bore 15mm complete all as specified and directed. |
| 38 | S&F brass chromium plated basin mixer valve for mixing of hot and cold water, screwed down for iron pipe of 15mm bore complete all as specified and directed |
| 39 | S&F brass chromium plated wall mixer for mixing of hot and cold water (3 in 1), screwed down for iron pipe of 15mm bore complete all as specified and directed |
| 40 | S&F PVC Connections 15mm size with PTMT Nuts of length 600mm and fixed, complete all as specified and as directed. |
| 41 | S&F Angle Cock,15mm fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 42 | Supply& Fixing tubular towel Rail CP Brass, chromium plated D type with CP Brackets, 600 mm long between flanges complete all as specified and as directed. |
| 43 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 44 | S&F Brass chromium plated shower rose 125mm size with 225 mm Flange, swivel joints, including fixing to steel pipe or union complete all as specified and directed. |
| 45 | S&F Soap Dish Stainless Steel complete all as specified & directed. |
| 46 | S&F Peg Set of 6 Stainless Steel as approved complete all as specified & directed. |
| 47 | S&F Corner Glass Shelf 300mm (with ABS Brackets) 300 x 300mm as approved complete all as specified & directed. |
| 48 | S&F Hand Shower (health faucet) CP Brass 15 mm bore with 1 meter long easy flex tube in chrome finish and wall hook with NRV (Back Flow Preventer) as approved by the GE complete all as specified & directed. |
| 49 | S&F Towel Ring including necessary stain less steel screws, rawl plugs and washers complete all as specified and directed. |
| 50 | S&F Toilet paper Holder with flat recessed type p stainless steel, complete all as specified and directed |
| 51 | S&F one piece floor mounted vitreous china EWC with integrated flushing cistern, soft closing seat cover and necessary nut/bolt for fixing complete all as specified and as directed |
| 52 | S&F wash hand basin of vitreous china counter sunk size 450mm x 350mm x 150mm, PVC waste pipe 32mm dia, waste coupling brass chromium plated and including cutting complete all as specified and directed. |
| 53 | S&F selected quality looking mirror bevelled edge 5.5mm thick selected quality glass, mounted on 6mm thick commercial plywood, including moulding of all round edges of looking mirror and fixed to wooden plug with 4 nos CP brass screwed cup washers complete all as specified and directed. |
| 54 | M&L 100 mm thick PCC (1:4:8 ) type D-2 (using 40mm grade stone aggregate) as in sub base finished even and rough complete all as specified and as directed. |
| 55 | M&L for 25mm thick PCC 1:2:4 type B-0 (12.5mm graded stone aggregate) as in level course with finshining in cement concrete surface even and rough to receive screed bed complete all as specified and as directed. |
| 56 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over with and including screed bed of 15 mm thick in CM 1:6 complete all as specified and directed |
| 57 | M&L Joint free Non - skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over with and includingscreed bed of 15 mm thick in CM 1:6 and pointed in white or coloured cement to match complete all as specified and directed |
| 58 | M&L Glazed coloured ceramic tiles in verticle surfaces 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match with backcoat of over and including screed bed or bedding layer 10mm thick in CM 1:4 and pointed in white or coloured cement to match complete all as specified and directed |
| 59 | M&L for cast iron spun pipe 100mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints fixed to walls including necessary clamps etc.complete all as specified and as directed. |
| 60 | M&L for cast iron spun pipe 100mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints laid in trenches or floor complete all as specified and as directed. |
| 61 | M&L for cast iron spun pipe 75mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints laid in trenches or floor complete all as specified and as directed. |
| 62 | S & F CI spun pipe bends 100mm bore of any radius, diminishing piece or tappers complete all as specified and as directed. |
| 63 | S & F CI spun pipe bends 75mm bore of any radius, diminishing piece or tappers complete all as specified and as directed. |
| 64 | S & F CI spun pipe branch piece 100mm bore, double(eaqual or unequal), with parallel branches and fitted with oval access door complete all as specified and as directed. |
| 65 | S & F CI spun pipe branch piece 75mm bore, single(eaqual or unequal),ordinary or inverted spigot or socketted type with parallel branches and fitted with oval access door complete all as specified and as directed. |
| 66 | Extra over CI spun pipe fittings if fitted with oval access door 100mm complete all as specified and as directed. |
| 67 | Extra over CI spun pipe fittings if fitted with oval access door 75mm complete all as specified and as directed. |
| 68 | S & F CI spun fittings floor tarps of size 75mm with grating including jointing to CI pipe with lead joint all as specified and as directed. |
| 69 | S & F CI spun cowls 100mm bore, complete all as specified and as directed. |
| 70 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concret 1:2:4 type B-1 smooth finished, and reforming benching as required, for internal dia of pipe 150mm complete all as specified and directed. |
| 71 | M&L precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:6 including necessary form work complete all as specified and directed. (reinforcement to be measured separately) |
| 72 | M&L for providing PCC 1:2:4 type B-0 as in roof kerbs or mud stops rouded or chamfered on edges (using 12.5mm graded stone aggregate) complete all as specifed and directed. |
| 73 | M&L 75mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection incl finishing even and smooth w/o using extra cement, laid in bays including necessary form work complete all as specified and completed |
| 74 | M&L for Forming contraction (Dummy) joints 65mm deep x 10mm wide with ceiling compound grade \"A\" complete all as specifed and directed. |
| 75 | S&F rolled mild steel sections channel angle Tee section and in tubular section as in main and cross beams, hip and jack rafters; purlins,post where connected to common rafters and running rails fixed with angle cleat or other connecting plates conforming to Fe 410-W Gde-E-250, quality A complete all as specified and directed. |
| 76 | S&F prepainted aluminium zinc steel sheet (galvalumebase) or thinknee0.50mmhaving tensile strength of 550 MPA , in colour and profile as apporved by GE and to be facotry moulded as in roof covering /cladding and fixed with hot dipped galvanished with high durable protective triple coated self tapping screws /self drilling serews, to suit the roofing in customizedcolour matching with the colour of roofing and screws are to be fixed using torque adjustable electronic gun screws drills of suitable capacity complete all as specified and directed |
| 77 | M&L for applying two coats of synthetic enamel painting over a coat of red oxide zinc chrome primer on steel surfaces over 10cm width or girth including preparation of surface complete all as specifed and directed. |
| 78 | S&F powder coated aluminium snap grid frame work for false ceiling size of grid 605 mm x 605 mm complete all as specified and directed. |
| 79 | Supply & fixing 4mm thick non asbestos E-board cement building board for insulation and accoustic purpose, 600 x 600 mm size fixed with staples on snap grid as in ceiling complete all as specified and directed. |
| 80 | M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted over & including a coat of primer complete all as specified and directed. |
| 81 | M&L for preparing newly plastered surfaces and applying two coat of cement base paint over a coat of primer complete all as specified and as directed |
| 82 | Material & Labour for brick work with sub class `B’ bricks using old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 83 | M&L for Mirror polished Kota Stone slab flooring 20-25 mm thick over with and including cement screed bed 15mm thick in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed |
| 84 | M&L Glazed coloured ceramic tiles in verticle surfaces 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match with and including back coat of screed bed or bedding layer 10mm thick in CM 1:4 and pointed in white or coloured cement to match complete all as specified and directed |
| 85 | BOQ ( Sch \"A\") R/M itemsTaking down old unserviceable and Supply, fixing, testing and commissioning of Centrifugal motor with pump set 30 HP (22KW), electric driven, 3 phase, 4 pole suitable for suction and delivery line as required at site, 60 mtr head, 1266 LPM, 1465 RPM with CI Casing, Br Impeller, SS Shaft, CS Sleeve, Mech Seal , Foot B 3 with MS heavy baseframe, with coupling guard, all as required at site along with pressure gauge complete all as specified and directed Note:- The unserviceable pump sets will be depostied to MES Store yard by contractor at his own cost. |
| 86 | Taking down old unserviceable and Supply, fixing, testing and commissioning of NRV 80 mm as required at site complete all as specified and directed |
| 87 | Supply, fixing of flange as required at site complete all as specified and directed |
| 88 | Taking down old unserviceable and Supply, fixing, testing and commissioning of sluice valve 80 mm as required complete all as specified and directed |
| 89 | M&L for Earthingcomplete with galvanized sheet earthplate electrodes 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2. 25mtr deep below ground level) with top edge of plat not less than 1.5 mtr below normal ground level connected to galvanized iron strip 25 x 4 mm as earthing lead by means of bolts, nuts , check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3and including excavation and earth work, GI pipe light grade 15 mm bore for protection of GI wire from earth electrode to and incl the earth test point of galvanized Iron/steel of size 75x75x 25mm,supplying and laying charcoal dust, common salt, PCC 1:2:4 typeB1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced with 6 mm dia TMT bars @ 75mm C/C both ways with MS handle 12mm dia, PGI funnel and wire mesh,20 mm dia GI pipe light grade for wateringand connected to earth test point including brazing at all joints except at test point and testing complete all as specified and directed Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost to Govt by Contractor. |
| 90 | M&L for mild steel work Fe-410-W grade in equal angle as per site requirement of size and MS Flat iron as per site requirement of size to making cable tray, bracing, supports, fabricated from structural steel section by welding, bending , cutting, grouting in any shape or size as directed by Engr-in-Charge as required at site from motor to wall/panel box and including two coats of aluminium paint over a coat of red oxide primeretc complete all as specified and directed. Note:- (Height and width of cable tray will be as per site requirement and directed |
| 91 | Supply , laying , connecting, testing and commissioningof16 Sqmm 3 core PVC insulated flat type 1100 Volts copper cable fixed to walls/ cable tray with necessary clampswith suitable size glands, crimping type lugs and incl the disturbence surface ofmaking good etc all as specified and directed |
| 92 | Supply & Fixing point wiring for one light point/ fan (independent) point controlled by one, one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS)PVC cable drawn into & including medium grade PVC conduit (not less than 20mmouter dia ) with all fittings and accessories fixed concealed(including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) andsunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washersincluding one continuous run of PVC insulated (green colour) 1.5 Sqmm multistrandedcopper conductor cable earth wire and connected to earth dolly complete all as specified and directed Note:- wiring shall be done in colour coding as directed by Engineer in charge. |
| 93 | All as per item No. 92 herein before butone 3 pin socket outlet 5 Amps on the same board. |
| 94 | Supply & Fixing lamp holder (modular type) PVC insulated body with back plate for angle/battern fitting complete all as specified and directed. |
| 95 | Suppy & Fixing switch piano flush type single pole, one way 5 Amp complete all as specified and directed. |
| 96 | Supply & Fixing socket outlet 2 in 1, 3 pin, 5 Amp flush type complete all as specified and directed. |
| 97 | Supply & Fixing ceiling rose, PVC/ Poly carbonate, isolated body three terminal complete all as specified and directed. |
| 98 | Supply & Fixingsheet metal enclosure for DBs(double door type)single pole and neutral 4 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed . |
| 99 | Supply & Fixing 240V, 10KA \"B\" curve miniature circuit breaker (MCB) of single pole 5 to 32 Amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed . |
| 100 | Supply & Fixing 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of SPN 32 Amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed . |
| 101 | Supply and fixing LED lights fitting 1x 20W (warm/milky white as required on site), 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and life of tube light not less than 50,000 hours.completeall as specified and directed. Make:- Havells/Philips/Bajaj |
| 102 | Supply and Fixingpropeller type AC ventilating fans 230 volts, 50 C/S heavy duty 1400 RPM, 300 mm sweep (Exhaust fan) metal body and blades protected by metal guards,Bird guard for safetry,two sleeves bearings, complete includingthe ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core white 23/.0076 copper cable, rubber insulated from ceiling rose to exhaust fan motor complete all as specified and directed. |
| 103 | Supply and fixing or passing through pipe, stranded conductor 6 Sqmm, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers no more than 1 meter apart including 4 mm suspension wire, one twin core cable flat or circular etc all as specified and directed. |
| 104 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories (incl ceiling clamp/hook fixing in ceiling/roof with fashner/nut & bolts), 230 V, 1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)complete all as specified and directed |
