Military Engineer Services-MES has published Tender For Provision Of Duty Offer Room At Lab Sec, Fd Vet Hosp, Provision Of Welded Mesh Protection With Iron Frame Supported With In And Out Gate In Varandah At Bldg No P-87, P-89, P-88 Of Fmsd, Provn Of Air Curtain For Various Wards At Base Hosp And Pr. Submission Date for this Tender is 18-09-2023. Air Fittings and Connectors Tenders in guwahati Assam. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 28-Aug-2023 | Date Corrigendum | Date | 14-09-2023 |
| 2 | 05-Sep-2023 | BOQ Corrigendum | BOQ | 18-09-2023 |
| 3 | 05-Sep-2023 | Date Corrigendum_2 | Date | 18-09-2023 |
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out, in soft/loose soil complete all as specified and directed. |
| 2 | Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for column & wall foundation,laying of UG cable, pipe and getting out in soft/loose soil complete all as specified and directed. |
| 3 | M&L PCC (1:2:4)type B-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 4 | M&L Reinforced cement concrete (design mix) M-25 (20mm graded aggregates) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 5 | M&L Reinforced cement concrete (design mix) M-25 (20mm graded aggregates) as in chajjas complete all as specified and directed. |
| 6 | M&L Reinforced cement concrete (design mix) M-25 (20mm graded aggregates) as inBeams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 7 | M&L Reinforced cement concrete (design mix) M-25 (20mm graded aggregates) as inColumns, pillars, piers, posts and struts complete all as specified and directed. |
| 8 | M&L Reinforced cement concrete (design mix) M-25 (20mm graded aggregates) as inSlabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 9 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 10 | M&L Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 11 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat, roughed finished surfaces of concrete, complete all as specified and directed. |
| 12 | Formwork to chullah hoods, chajjas, troughs and similar items including edges, flat, roughed finished surfaces of concrete, complete all as specified and directed. |
| 13 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc., flat, roughed finished surfaces of concrete, complete all as specified and directed. |
| 14 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal roughed finished surfaces of concrete, complete all as specified and directed. |
| 15 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)roughed finished surfaces of concrete, complete all as specified and directed. |
| 16 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 17 | M&L Brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and as directed. |
| 18 | M&L 25mm thick Damp proof course to horizontal or vertical surfaces in In cement concrete 1:2:4, type B-0 including necessary formwork complete all as specified and as directed. |
| 19 | M&L 15mm thick rendering with cement mortar (1:4)on fair faces of brick work in two layers (10mm& 5mm)seperately mixed with water proofing compound in top layer as per manufacturer"s instructions and finishing the surface even and smooth without using extra cement complete all as specified and as directed. Note:- WPC shall be measured and paid seperately under appropiate item. |
| 20 | M&L Rendering 10 mm thick on other thanfair faces of brick work or concrete surfaces in cement mortar 1:6 for finished even and smooth complete all as specified and as directed. |
| 21 | M&LRendering 5 mm thick on concrete surfaces as in ceiling in cement mortar 1:3 for finished even and smoothcomplete all as specified and as directed. |
| 22 | M&L prepration of new plastered surfaces ofwall, applying two coat of oil emulsion distemper including a coat of primer complete allas specified and as directed. |
| 23 | M&L prepration of new plastered surfaces ofceiling, applying two coat of oil emulsion distemper including a coat of primer complete allas specified and as directed. |
| 24 | M&L preparation of new treated plastered surfaces of walland applying twocoat ofweather proof paint (exterior quality acrylic emulsion paint) over a coat of suitable priming coat complete all as specified and directed |
| 25 | M&L second class hardwood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 26 | S&Fmild steel hold fasts; for securing chowkhats and similar small articles conforming to Fe-290 Gde-E-165 incuding treating hold fast with tar or coal tar black paint, sandingcomplete all as specified and as directed. |
| 27 | M&L providing plain cementconcrete type C-1, (1:3:6), (using 20 mm graded stone aggregate), as in copings,fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 28 | S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sidescomplete all as specified and directed. |
| 29 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete as required and as directed. |
| 30 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing as specified in SSR Part I, Section 8 complete all as specified and as directed. |
| 31 | S&F Powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed |
| 32 | S&F Colour coatedanodised aluminium windows/ventilators/partitionsany type including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, along with standard locking arrangements, handles, tower bolts etc as required. complete all as specified and directed Note:- (i) Labour charges for fixing of glass/wire guage/aluminum grills is inclusive in the unit rate quoted. Glass/Wire Guage/aluminum grills shall be measured and paidseperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed |
| 33 | Supply only 4mm thick plain sheet frosted glass one side, ordinary quality fixed with Aluminum frame work n. exc 0.5 sqm in each pane complete all as specified and as directed. |
| 34 | Supply only Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum window/ventilator shutters complete all as specified and as directed. |
| 35 | S&F factory made 35mm thick second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); complete all as specified and as directed. Note:- S&F glass or guage shall be meadured and paid seperately under appropiate items. |
| 36 | S&F 100mm size Butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed. |
| 37 | S&F 150mm size aluminium anodised barrel tower bolt of extruded section and fixedcomplete all as specified and as directed. |
| 38 | S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 39 | S&F 300 mm aluminium alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium ally fixed complete all as specified and as directed. |
| 40 | Returning, filling in, including spreading,levelling, watering and well ramming in layers n exc 25 cm layers in soft/loose soil complete all as specified and directed. |
| 41 | Removing excavated material (Soil) not exceeding 50 metre and depositing where directed at a level not exceeding 1.50 metre above the starting point complete all as specified and directed. |
| 42 | Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 43 | M&L Hardcore of gauge n exc. 63 mm, deposited, using Broken stone or boulders, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 44 | M&L 75mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in sub base complete all as specified and as directed. |
| 45 | M&L 75mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in plinth protection laid in alternatebays (not exceeding 2 Sqm each)and finished even and smooth without using extra cement and providing jointsthroughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed. |
| 46 | M&L 40mm thick cement concrete (1:2:4) type B-1( using 20mm graded crushed stone aggregate) as in floor laid in alternatebays (not exceeding 2 Sqm each)and finished even and fair without using extra cementcomplete all as specified and as directed. |
| 47 | M&L Virified Ceramic tiles light shade, 9-10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including cement screed 15 mm thick 1:6 complete all as specified and as directed. |
| 48 | M&L Glazed ceramic coloured tiles of size. 450x300x7mm thick on vertical surfaces of walls such as skirting dado etc and includingrendering10mm thick screed bed in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed, |
| 49 | S&F 15mm bore GI pipe medium grade water tube with all fittings laid in floors fixed to walls and ceilings or laid in floors,complete allas specified and as directed. |
| 50 | S&F 20mm bore GI pipe medium grade water tube with all fittings laid in floors fixed to walls and ceilings or laid in floors, complete allas specified and as directed. |
| 51 | S&F single piece-WC with PP soft close slim seat cover , Hinges, Dual flushing cisternfitting,Fixing accessories set and accessories set, Size: 360x640x6850mm,S trap-220mm complete all as specified and as directed . |
| 52 | S&F wall mixer non telephonic shower with connecting legs and wall flanges complete all as specified and as directed . |
| 53 | S&F vitreous china, white, Table top basin,size :425x340x175mm complete all as specified and as directed |
| 54 | S&F 15mm high neckbasin tap complete all as specified and as directed |
| 55 | S&F bottle trap 32mm size with 250mm and 190mm long wall connection pipes and wall flange, complete all as specified and as directed. |
| 56 | S&F 15mm, 2 way bib cock with wall flange complete all as specified and as directed. |
| 57 | S&F 15mm, angle valve with wall flange complete all as specified and as directed. |
| 58 | S&F health faucet (ABS Body) with 8mm dia, 1 meter long flexible tube & wall hook complete all as specified and as directed |
| 59 | S&F corner glass shelf (with bracket) complete all as specified and as directed |
| 60 | S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed |
| 61 | M&L Granite (of any type) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including cement screed 20 mm thick in cement mortar 1:6 complete allas specified and as directed. complete all as specified and as directed. |
| 62 | S&F 150mm bore UPVC Pipes (SCH-40) laid in trenches complete all as specified and as directed. |
| 63 | S&F framed work such as grills, grating, etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed baluster; walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 including necessary preperation of surfaces and applying one shop coatof red oxide, zinc chrome primer complete all as specified and as directed. |
| 64 | Supply, hoisting fix in position and connecting up 1000 Ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed. |
| 65 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/loose soil complete all as specified and directed. |
| 66 | M&L preparing new steel surfaces of any description, not otherwise describe over 10cm width or girth and applyingtwo coats of synthetic enamel paint complete all as specified and as directed. |
| 67 | M&L preparing new steel surfaces of any description, not otherwise describe not exc 10cm width or girth and applyingtwo coats of synthetic enamel paint complete all as specified and as directed. |
| 68 | Cutting chases in walls for concealed 15mm/20mm bore GI pipe to the required sizes and making good the same after relaying/refxing GI pipe in cement mortar 1:3 to match with adjoining surfaces complete allas specified and as directed. |
| 69 | S&F 20mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 70 | S&F aluminum anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed |
| 71 | S&F20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 72 | S&F 15mm bore Stop valves, fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| 73 | S&F 15mm bore PVC Connection with PTMT nut of length 450 mm complete all as specified and directed |
| 74 | S&F Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union,complete allas specified and as directed. |
| 75 | M&L for concrete bed in P.C.C.1:3:6 type C2 (using 40mm graded stone aggregated )as in concrete bed to drain pipe 110mm dia pipes including packing under and haunching against the sides of the pipes after laying & testing complete all as specified and directed. |
| 76 | M & L for 110mm PVC SWR single socketed,inanylength with rubber ring joints, laid in trenches & jointed complete all as specified anddirected.. |
| 77 | M&L for PCC (1:3:6)type C-2 (using 40 mm graded stone aggregate) as in surface channels and drain complete all as specified and as directed. |
| 78 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.complete all as specified and as directed. |
| 79 | Add to or deduct for each 25 mm girth or part thereof over or under 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed. Note:- Rate quoted is for adjustment of rate only for the actual size excuted at site for the item no 78 mentioned as above |
| 80 | M&L for sand cushioning in cable trenches over & under the cable/ducts with river washed coarse sand (approved source), as per standard practice with proper compaction complete all as specified and directed. NOTE : Punned thickness shall be considered for payment as per para 19.75 of SSR Part-I. |
| 81 | Supply and laying for brick protection for protection of cable over sand cushioning cables inside the trench by using common brunt clay building bricks sub-class “B” old size brick and flat and width wise along the axis of the trenchcomplete all as specified and directed. |
| 82 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25sq mm, 4core complete all as specified and as directed. |
| 83 | S&F40mm bore GI pipe light grade with all necessary fittings (ISI marked) as in cable protection fixed to pole,laid in trenches/road/floor complete all as specified and as directed. |
| 84 | M&L 50mm outer diameter, 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and as directed. |
| 85 | M&L 25mm outer diameter, 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and as directed. |
| 86 | M&L50mmouter diameter, PP-R Gate valves (brass insert) as per requirement of the site, complete all as specified and as directed. |
| 87 | M&L25mmouter diameter, PP-R Gate valves (brass insert) as per requirement of the site, complete all as specified and as directed. |
| 88 | Cutting existing 100mm steel tubing for alterations or additions (Each cut measured) done in position without taking down complete all as directed. |
| 89 | S&F electric water heater, storagetype, BEE 5 star rated, 25 ltr capacity 230 volts AC, 50 Hz comprising of high wattage heating elementfor instant heating, extra thick SS inner tank of superior 304 grade, rust & shock proof ABS outer body, non-ferrous pressure plate with & including provision of necessary grouting bolts suitably flushed to wall or any other surface, connection with PVC connection pipe of suitable length with CP brass nut for hot and cold water, including electric connection with 3 core PVC insulated, sheathed, stranded copper conductor cable/flexible chord complete all as specified and as directed. |
| 90 | S&F sheet metal encloser Plug and socket for suitable for 20 Amps SPN with and including 20 AmpsMCB andflush to wall surface complete all as specified and directed. . |
| 91 | Supply, install, testing & commissioning of hi wall, split-type Air Conditioner Unit of capacity 1.5 TR based on Inverter Technology comprising ofindoor & outdoor units complete with cordless remote control unit & with in-builtair ionizer & plasma filter for better indoor air quality with minimum 5 star rated including electric connections complete all as specified and as directed. NOTE : (i) The Air Conditioner shall be initial filled / charged with refrigerant of specified quantity & the refrigerant to be used shall of Non-CFC type & as per the latest technology. (ii) The cost of additional refrigerant pipes required (if any) is deemed to be included in the unit quoted rates. (iii) Suitable piping of adequate length & size 5/8" for drainage of condensate water from indoor unit shall be provided & the cost of the same is deemed to be included in the unit quoted rates. (iv) Anything missed out in the technical specifications but technically required for efficient working of the AC is deemed to be included in the unit quoted rates. |
| 92 | Supply, install & testing of refrigerator, ISI marked, electric driven, single phase having capacity 185 Ltrs (or nearest higher size), single door, frost-free smooth flow type, separate chill compartment with plastic shelves, ice maker unit, vegetable/fruit drawer, body colour as approved with suitable lighting arrangement, working with non-CFC refrigerant & 3 star rated including electric connection complete all as specified and as directed. |
| 93 | S&F Voltage Sablizer for automatic operation, single phase with neutral, air cooled indoor type and designed for input voltage variation between 170 Volts to 250 Volts with voltage stablizer at 230 Volts with accuracy+2.5% and Capacity of3 KVA complete all as specified and directed. |
| 94 | Demoliation Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 95 | M&L for 18-20 mm thick machine cut Kota stone slab as in flooring over and including 20 mm thickscreed bed in cement mortar (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and complete all as specified and as directed. |
| 96 | M&L 25mm thick cement concrete (1:2:4) type B0( using 12.5mm graded crushed stone aggregate) as in sub base complete all as specified and as directed. |
| 97 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240including necessary preperation of surfaces and applying one shop coatof red oxide, zinc chrome primer complete all as specified and as directed. |
| 98 | S&F welded steel wire fabric n exc 4 Kg per sqm supplied and fixed complete to wood or steel membersincluding necessary preperation of surfaces and applying one coatof red oxide, zinc chrome prime complete all as specified and as directed. |
| 99 | M&L MS flat iron including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., conforming to Fe-290 Gde E-165 and similar work including necessary preperation of surfaces and applying one shop coatof red oxide, zinc chrome primer complete all as specified and as directed. |
| 100 | M&L concealed sub-main wiring alongwith earth wire of size of 2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire, ISI marked, FRLSH, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of 25mm dia (Medium Grade)with all fittings and accessories ISI markedincluding cutting chases for conduits &making good to walls, floors etc complete all as specified and as directed. Notes;- (i) 2 Runs of 4Sqmm main cable and 1Run of 4 Sqmm earth wire along with 1 Run of PVC conduit with acessories shall be measured as one unit length (ii) Rate is deemed to be inclusive cutting chases and making good the distrubed surfaces of wall etc (iii) Loop length as required and as directed deemed to be included in the UNIT RATE QUOTED. |
| 101 | Supply,install, commissioning and testing of commercial Air curtain unit for prevention of dust and conditioned air losses, single phase, 220 V, 50 HZ, made out of MS/CRCA sheet of minimum thickness 18 gauge finished with two coats of red oxide primer and final coat of synthetic enamel paint (oven baked) with MS - CRC 18 gauge square perforated suction grills, Aluminium alloy fans and single phase electric motor, nozzles etc, complete with fittings and accessories so as to produce 1 - 1.5 m/sec air velocity at floor level for door opening 28" x 78" complete all as specified and directed. |
| 102 | S&F Prepainted galvalume aluminium zink coating GI based corrugated/semi corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 103 | S&F Prepainted galvalume aluminium zink coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridges, valley eaves boardand fixed with self tapping screws complete all as specified and as directed |
| 104 | M&L PCC (1:4:8)type D-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 105 | M&L 100mm thick cement concrete (1:4:8) type D-2( using 40mm graded crushed stone aggregate) as in sub base complete all as specified and as directed. |
| 106 | M&L 75mm thick cement concrete (1:2:4) type B-2( using 40mm graded crushed stone aggregate) as in floor finished even and smooth without using extra cement complete all as specified and as directed. |
| 107 | M&L Pre polished chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick set and jointed and pointed in neat cement slurry in floor with grey cement and pigment over cement screed 15 mm thick in cement mortar 1:6 complete allas specified and as directed. |
| 108 | M&L surface point wiring for light/fan points controlled by one, one way switch complete with 1.5 Sqmm single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) with multistranded copper conductor with proper colour codingdrawn through and including non-metallic rigid PVC conduit medium grade with accessories (ISI marked) fixed in wall/fixed to roof, ceiling etcincluding provision of 1.5 Sqmm PVC insulated multistranded unsheated copper conductor cable FR-LSH (ISI markd) with proper colour coding as earth continuity conductor connected to common earth dolly , modular sheet steel surfaced terminal box of appropriate size suitable for modularswitch/ fittingsfixed in walls, with modular back plate, top cover fixed, for housing switches, socket outlets, fan regulators etc duly earthed complete all as specified and as directed. Note:- Connections of cable with MCB"s or bus bar shall be done through proper size copper/brassthimbles. |
| 109 | All as per item No 108here-in-before but for one 6 amps socket out let point on the same board with other switches |
| 110 | All as per item No 108here-in-before but for one 6 amps socket out let point on independent board. |
| 111 | S&F LED lights fitting 1x 20Watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 112 | S & F LED Bulk Head fitting 10 watt with Injection molded polycarbonate housing IP66, IK10, 3.5kV inbuilt surge protection, PF =0.95,total System Lumens 1000 lm, 6500k CRI = 80, Operating Voltage range 140 V - 270 V. complete all as specified and as directed. |
| 113 | S & F energy saving & environment friendly long life 60 Watt,(or nearest next higher wattage)CT = 5700 K, LED building security light made up of pressure die-cast aluminium housing with acrylic cover as diffuser with IP 66 protection & impact resistance not less than IK-07 complete withintegrated type, with high efficiency electronic driver, surge suppressor of 5 KV or more & high brightness LEDs, luminaire efficacy > 110 lumens/Watt, power factor = 0.90, operating range 140 to 270 V, 50 Hz complete including 32mm bore GI pipe bracket (Light Grade) of length 1.5 mtrs bent to shape and fixed with 25mm x 4mm MS flat with necessary nuts, bolts, washers etc, painting with two coats of syntheic enamel paint over a coat of primer and connecting up with and including three core twisted flexible copper conductor cable of suitable size all as specified & as directed. |
| 114 | S&F Modular switch, single pole, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed. |
| 115 | S&F Modular shuttered Socket outlet, 5 Pin, 6 Amp, 2 Module, 230 volts, ISI marked complete all as specified and as directed. |
| 116 | S&F ceiling rose, PVC/ polycarbonate, isolated body, three terminals, complete all as specified and directed. |
| 117 | S&F stepped type modular electronic fan regulator 120 watt 2 module suitablefor 1200/1400 mm sweep energy saving fans,ISI marked complete all as specified and directed. |
| 118 | S&F ceiling fan 1200 mm sweep, Air Delivery not less than 210 CFM, heavy duty, single phase, AC, 230 Volts, 50Hz, 5 star rating, ISI marked complete with 30 cm down rod, canopy, blades, motor etc and connecting up complete including provision of cable 3 core of size 0.75 Sqmm from ceiling rose to fan complete all as specified & as directed. |
| 119 | S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), IP-43 doubledoor, Single pole & neutral with 200 amps rated bus bar, including blanking plates as required andfixed to wall surface including making good the distrubed surfaces of walls as per existing surfaces and finishes, complete all as specified and as directed. |
| 120 | S&F MCB Single pole and Neutral, 6 to32 amps, 240 volts, ‘C’ curve, 10 KAall complete as specified and as directed. |
| 121 | S&F MCB Single pole, 6 to32 amps, 240 volts, ‘C’ curve, 10 KAall complete as specified and as directed. |
| 122 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10sq mm, 2core complete all as specified and as directed. |
| 123 | Earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized iron earth lead wire of 4 sqmmby means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part - I, including necessary excavation and earth work, P.C.C (1:3:6) type C-I with 50 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab (reinforced with 8 mm dia TMT bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar),including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (light grade), wire mesh, aluminium lugs, complete in all respect, GI earth wire protected by 15 mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed,including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completioncomplete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
