|
| 1 | TableCentre (Drg No FD-235, 274) Removing old damaged top,S & F new Top of 18 mm thick pre-laminated praticale board, as per existing shape and size,provided hard pvc toe to each leg ,all as per drg or asdirected by Engr-in-Charge |
| 2 | Removing old damaged legs , S & F new legs of 30 x 60 mm thick as per existing shape and size, as per drg or directed by Engr-in-Charge. |
| 3 | All as per item No 01 above but long Rail. |
| 4 | All as per item No 01 above but stort rail |
| 5 | All as per item No 01 above but stiffner. |
| 6 | M&L for applying two coat ofwood polish high glossy/French polish all exposed wood surfaceas per drg or asdirected by Engineer-in-Charge. |
| 7 | Chair Varandha (PVC) (FD-19, 359, FD/MAP-II/07) Removing UNSV seat & back plastic sheet, S&F new seat & back plastic sheet as per drg or as directed by Engr -in- Charge. |
| 8 | M&L for welding to damage/decayed steel frame all as per drg or as directed by Engr-in-Charge. |
| 9 | Removing unsv plastic shoes from chair, S&F new hard PVC shoes of best quality as per drg or as directed by Engr-in-Charge. |
| 10 | S&F flat iron 20x3mm thick nos 2 welded to steel frame to supportchair as directed by Engr-In-Charge. |
| 11 | M&L for painting steel surface with two coat of white synthetic enamel paint as per drg or as directed by Engr-in-Charge. |
| 12 | Table Writing(Drg No FD-249, 268, 275) Removing old damaged top,S & F new Top of 18 mm thick pre-laminated praticle board, as per existing shape and size,provided hard pvc toe to each leg ,all as per drg or asdirected by Engr-in-Charge. |
| 13 | Removing old damaged legs , S & F new legs of 35 x 55 mm thick as per existing shape and size, as per drg or directed by Engr-in-Charge. |
| 14 | All as per item No 12 above but front/rear rail. |
| 15 | All as per item No 12 above but side rail |
| 16 | All as per item No 12 above but side stiffner. |
| 17 | All as per item No 12 above but shelves. |
| 18 | All as per item No 12 above but centre stiffner. |
| 19 | Removing old damage handle S&F Newhandle 100 mm long CP, all as specified shape, size, drg or as per directed by Engr-in-Charge. |
| 20 | Removingold damaged Shutter , S & F new Shutter made of 19 mm thick MDF board, as per existing shape and size,replaced unsv knobs, all as per drg or directed by Engr-in-Charge.. |
| 21 | All as per item No 12 above but drawers. |
| 22 | Removingold damaged bottom ply of drawer , S & F new 6 mm thickbottom ply of drawer as per existing shape and size all as per drg or directed by Engr-in-Charge.. |
| 23 | Removingold damaged back side ply of drawer , S & F new 12 mm thick back side ply of drawer as per existing shape and size all as per drg or directed by Engr-in-Charge.. |
| 24 | Removingold damaged left/right side ply of drawer , S & F new 12 mm thick left/right side ply of drawer as per existing shape and size all as per drg or directed by Engr-in-Charge.. |
| 25 | M&L for applying two coat ofwood polish high glossy/French polish all exposed wood surfaceas per drg or asdirected by Engineer-in-Charge. |
| 26 | Table dining 6/8 person (Drg No FD-239,269,273) Removing old damaged top,S & F new 18 mm thick pre-laminated praticale board Top as per existing shape and size,provided hard pvc toe to each leg ,all as per drg or asdirected by Engr-in-Charge. |
| 27 | Removing of old damage leg, S&F new 40 x 75 mm thickleg made of 1st class season teak, all as per drg or as per existing shape and size directed by Engr-in-Charge. |
| 28 | All as per item No 26 above but long rail. |
| 29 | All as per item No 26 above butstiffner |
| 30 | All as per item No 26 above butshortrail |
| 31 | M&L for applying two coat ofwood polish high glossy/French polish all exposed wood surfaceas per drg or asdirected by Engineer-in-Charge. |
| 32 | TablePeg (Drg No FD-266,277) Removing old damaged top,S & F new 18 mm thick pre-laminated praticale board Top, as per existing shape and size,provided hard pvc toe to each leg ,all as per drg or asdirected by Engr-in-Charge. |
| 33 | Removing of old damage leg, S&FNew 30 x 50 mm thick leg made of 1st class season teak,all as per drg or as directed byEngineer-In-Charge. |
| 34 | All as per item No 32 above butlong rail. |
| 35 | All as per item No 32 above but shortrail . |
| 36 | M&L for applying two coat ofwood polish high glossy/French polish all exposed wood surfaceas per drg or asdirected by Engineer-in-Charge. |
| 37 | Sofa Set 5 seaters with cushion (Drg No FD-281, FD/MAP/06) Removing of old damage seat and back cushion from Sofa Set 5 Seater , S & FNew cushion of 100 mm thick 40 density make sleep well/Kurlon duly upholster with tepstry cloth not less than Rs. 250/- Per meter ofbest quality approved shadeas per drg oras directed by Engineer-in-Charges. |
| 38 | Table Dressing Gents with Mirror(Drg No FD/E6/MAP/16 )Removing of old damage mirrorS&F new mirror of 5 to 5.5mm thick mirror as per drg or as directed by Engineer-In-Charge. |
| 39 | Removing of old damage drawers, S&F new drawers of 12/6 mm thick commercial BWR quality ply with knobs as per drg or as directed by Engineer-In-Charge. |
| 40 | Removing of old damage Top S&F New Topof 12 mm thick pre-laminated particale board,as per drg or as directed byEngineer-In-Charge. |
| 41 | Removing of old damageleft/right sideS&F new left/right side of 12 thick pre-laminated particale board,as per drg or as directed by Engineer-In-Charge. |
| 42 | Removing of old damageback side Ply,S&F new back side Ply as per drg or as directed by Engineer-In-Charge. |
| 43 | Removing of old damage bottom ply, S&F newbottom of 6 mm thick commercial BWR quality ply as per drg or as directed by Engineer-In-Charge. |
| 44 | Removing of old damage back side 6mm ply of mirror, S&F newback side 6mm ply for mirror as per drg or as directed by Engineer-In-Charge. |
| 45 | Removing of old damage long rail of mirror frame includingbeading , S&F new 25 x 35 mm thicklong rail of mirror frame including fitting as per drg or as directed by Engineer-In-Charge. |
| 46 | Removing of old damage short rail of mirror frame includingbeading , S&F new 25 x 35 mm thick short rail of mirror frame including fitting as per drg or as directed by Engineer-In-Charge. |
| 47 | M&L for applying two coat ofwood polish high glossy/French polish all exposed wood surfaceas per drg or asdirected by Engineer-in-Charge. |
| 48 | Bed Hard Steel (Drg No FD-FD/MAP/E6/08R) Removing of old damage 12mm BWR ply wood, S&F 12mm BWR ply wood ISI markedas per drg or as directed byEngineer-In-Charge. . |
| 49 | M&L for applying two coat ofwood polish high glossy/French polish all exposed wood surfaceas per drg or asdirected by Engineer-in-Charge. |
| 50 | Chair Revolving/computer steel (FD/E6/MAP) Removing of damage UNSVseat cushion,S&F newseat cushion of 75mm thick 32 density duly upholstery complete all as per specification or as directed by Engr-in-Charge. |
| 51 | Removing of damage old UNSV back cushionrest, S&F newbackrest cushion of 75 mm thick 32 density duly upholstery complete all as per specification or as directed Engr-in-Charge. |
| 52 | Removing of damage UNSV Hydrolic spring , S&F new Hydrolic spring to chair revolving complete all as per specification or as directed Engr-in-Charge. |
| 53 | Removing of damaged old UNSV arm rest, S&F new arm rest as per existing shape and size all as per drg or as directed by Engr-in-Charge. |
| 54 | Removing of damage old UNSV Base frame , S&F new Base frame iron/PVCto chair revolving complete all as per specification or as directed Engr-in-Charge. |
| 55 | Removing of damage old UNSV wheel S&F new wheel to chair revolving complete all as per specification or as directed Engr-in-Charge. |
| 56 | M&L for spray painting with of synthetic enamel paint black as per drg or as directed by Engr-in-Charge. |
| 57 | Chair writing Officer steel (FD/E6/MAP/12) Removing of damage UNSVseat cushion,S&F newseat cushion of 75mm thick 32 density duly upholstery complete all as per specification or as directed by Engr-in-Charge. |
| 58 | Removing of damage UNSV back cushionrest, S&F newbackrest cushion of 75 mm thick 32 density duly upholstery complete all as per specification or as directed Engr-in-Charge. |
| 59 | M&L for welding to damaged/decayed steel frame with arc welding as per std workmanship or as directed by Engr-in-Charge. |
| 60 | Removing of damaged/UNSV arm rest, S&F new arm rest as per existing shape and size all as per drg or as directed by Engr-in-Charge. |
| 61 | S&F flat iron 20x3mm thick welded to steel frame to supportchair as directed by Engr-In-Charge. |
| 62 | Removing UNSV plastic shoes from chair, S&F new plastic shoes of best quality as per drg or as directed by Engr-in-Charge. |
| 63 | M&L for spray painting with of synthetic enamel paint black as per drg or as directed by Engr-in-Charge. |
| 64 | Almirah SteelLarge/Med/Small with shelves (Drg No FD-67, 1031) Removing old worn out damaged base legs, S&F 1mm thick MS new legs as per existing shape and size as per drg or directed by Engr-in-Charge. |
| 65 | All as per item No 64 above but shelves |
| 66 | All as per item No 64 above but shutter |
| 67 | All as per item No 64 above but base/ top sheet |
| 68 | Removing of old damaged door lock, S&F new door lock as per sample or as directed by Engineer-in-Charge. |
| 69 | Removing of old damaged CP handle, S&F New CP handle as per sample as directed by Engineer-in-Charge. |
| 70 | M&L for welding to damaged/ decayed steel frame with arc welding as per std workmanship or as directed by Engr-in-Charge. |
| 71 | M&L for spray painting with synthetic enamel paint OG as per drg or as directed by Engr-in-Charge. |
| 72 | Teapoy (Drg No FD-232, 278, 34) Removing old damaged top, S & F new 18 mm thick pre-laminated praticale board Top as per existing shape and size,provided hard pvc toe to each leg ,all as per drg or asdirected by Engr-in-Charge. |
| 73 | Removing of old damage leg, S&FNew 30 x 50 mm thick leg made of 1st class season teak,all as per drg or as directed byEngineer-In-Charge. |
| 74 | All as per item No 72 above but long rail. |
| 75 | All as per item No 72 above but shortrail . |
| 76 | All as per item No 72 above but stiffner. |
| 77 | M&L for applying two coat ofwood polish high glossy/French polish all exposed wood surfaceas per drg or asdirected by Engineer-in-Charge. |
| 78 | Table bed side(Drg NoMAP/E6/15) Removing of old damage Top of Table bed side S & F new18 mm thick pre-laminated praticale board Top,as per drg or as per existing shape and size directed by Engr-in-Charge. |
| 79 | Removing of old damageleft/right side,S & F new 12 mm partical board with teak venreed OSD left/right sideas per drg or as directed by Engineer-In-Charge. |
| 80 | Removing of old back side,S&F new 6 mm ply BWR quality to backsideas per drg or as directed byf Engineer-In-Charge. |
| 81 | Removing of old damage shelves and bottoms, S&F New 19 thick MDF board shelves as per drg or as directed by Engineer-In-Charge. |
| 82 | Removing old damage handle S&F Newhandle 100 mm long CP, all as specified shape, size, drg or as per directed by Engr-in-Charge. |
| 83 | M&L for applying two coat ofwood polish high glossy/French polish all exposed wood surfaceas per drg or asdirected by Engineer-in-Charge. |
| 84 | Table Dressing Ladies with Mirror(Drg No FD/E6/MAP/11) Removing of old damage mirrorS&F new mirror of 5 to 5.5mm thick mirror as per drg or as directed by Engineer-In-Charge. |
| 85 | Removing of old damage drawers, S&F new drawer of12/6 mm thick commercial BWR qualithy playwood with knobs as per drg or as directed by Engineer-In-Charge. |
| 86 | Removing of old damage Top S&F new Top of 19 mm thick pre-laminated praticale boardas per drg or as directed byEngineer-In-Charge. |
| 87 | Removing of old damageleft/right side and centre protionS&F new left/right side & centre protion of 19 mm thick pre-laminated particale boardas per drg or as directed by Engineer-In-Charge. |
| 88 | Removing of old damageback side ply,S&F new back side Ply of 6 mm thick commmercial BWR quality, as per drg or as directed by Engineer-In-Charge. |
| 89 | Removing of old damageleg , S&F new leg as per drg or as directed by Engineer-In-Charge. |
| 90 | Removing of old damage bottom ply , S&F new 12 mm thick bottom commercial BWR quality plyas per drg or as directed by Engineer-In-Charge. |
| 91 | Removing of old damageglass shutter with aluminum channel, S&F new glass shutter with aluminum channelas per drg or as directed by Engineer-In-Charge. |
| 92 | M/L for applying two coat ofwood polish high glossy/French polish all exposed wood surfaceas per drg or asdirected by Engineer-in-Charge. |
| 93 | Bin Soil Linen. multipurpose(Drg No FD-E6/MAP/09) Removing of old damaged top S&F New Top of pre-laminated partical board of 18 mm thickas per existingshape & size, all as per drg and directed by Engineer-in-Charger. |
| 94 | Removing old damage left/right side pre laminated partical board, S&F New left/right side pre laminated practical board of 18 mm thickall as per drg and directed by by Engr-in-Charge. |
| 95 | Removing of old damaged drawer S&F new drawer of 18 mm thick pre-laminated praticle boardexisting shape and sizeall as per drg or as directed by Engineer-in-Charger. |
| 96 | Removing old damage shutter S&F New shutter of 18 mm thick pre-laminated praticle board as per existing shape and size, drg or as directed by Engr-in-Charge. |
| 97 | Removing old damange legs S&F New legs as per existing shape and size as per drg or as directed by Engr-n-Charge. |
| 98 | Removing old damage handle S&F Newhandle 100 mm long CP, all as specified shape, size, drg or as per directed by Engr-in-Charge. |
| 99 | M&L for applying two coat ofwood polish high glossy/French polish all exposed wood surfaceas per drg or asdirected by Engineer-in-Charge. |
| 100 | Side Board(Drg No FD-241, 371) Removing of old damage Top Board S&F new Top Board as per drg or as directed byEngineer-In-Charge. |
| 101 | Removing of old damage left/right side boardS&F New 18 mm thick pre-laminated praticle board left/right side boardas per drg or as directed byEngineer-In-Charge. |
| 102 | Removing of old back side ply ,S&F new 6 mm thick back side BWR quality ply as per drg or as directed byf Engineer-In-Charge. |
| 103 | Removingold damaged Shutter , S & F new 19 mm thick pre-laminated particle board Shutter as per existing shape and size,replaced unsv knobs,handle and hinges, all as per drg or directed by Engr-in-Charge.. |
| 104 | Removing of old damage drawers, S&F new 12 mm thick drawers of BWR quality ply with knobs as per drg or as directed by Engineer-In-Charge. |
| 105 | S&F 18mm thick teak veneered parctical board of exterior grade-1 OSD to drawer front sideas per specified and directed by Engineer-in-Charge. |
| 106 | Removing of old damage shelves, S&F new 19 mm thickBWR ply shelves as per drg or as directed by Engineer-In-Charge. |
| 107 | Removing old damage handle S&F Newhandle 100 mm long CP, all as specified shape, size, drg or as per directed by Engr-in-Charge. |
| 108 | M&L for applying two coat ofwood polish high glossy/French polish all exposed wood surfaceas per drg or asdirected by Engineer-in-Charge. |
| 109 | Chair Dining Officer.(Drg No FD-MAP/02, FD-E6/MAP/10R)Removing old damged seat cushion from chair, S&F New seat cushion of 75 mm thick 40 mm dinesity Sleep Well/Kurlone duly upholes by with tepestory cloth not less than Rs 250/- per mtrof approved all as specifiedas per drg and directed by Engr-in-Charge. |
| 110 | Removing ofold damagedseat ply S&F New seatply 6 mm thick BWR quality as per existingshape and size or drg and directed by Engr-in-Charge. |
| 111 | Removing ofdamaged front leg ,S&F Front leg of 2nd class HW sal wood, as per drg or as directed by Engr-in-Charge. |
| 112 | All as per item No 109 above but rear leg. |
| 113 | All as per item No 109above butside rail. |
| 114 | All as per item No 109 above butfront rail. |
| 115 | All as per item No 109above butrear rail. |
| 116 | All as per item No 109above butback rest. |
| 117 | All as per item No 109above but stiffner. |
| 118 | M&L for applying two coat ofwood polish high glossy/French polish all exposed wood surfaceas per drg or asdirected by Engineer-in-Charge. |
| 119 | Teapoy Varandha Steel (Drg FD-255, 383) Removing old damaged top, S&F new top of 18 mm thick pre-laminated praticale board as per existing shape and size all as per drg are as directed by Engr-in-Charge. |
| 120 | M&L for welding to damage/decayed steel frame all as directed by Engr-In-Charge. |
| 121 | Removing UNSV plastic shoes from leg, S&F new hard PVC shoes each leg best quality as per drg or as directed by Engr-in-Charge. |
| 122 | M&L for painting steel surface with two coat of white synthetic enamel paint as per drg or as directed by Engr-in-Charge. |
| 123 | Hat Stand with Mirror(Drg No FD-206,233) Removing of old damage mirrorS&F new mirror of 5 to 5.5mm thick mirror as per drg or as directed by Engineer-In-Charge. |
| 124 | Removing of old damageback side ply , S&F new back side ply 6 mm thick BWR quality as per drg or as directed by Engineer-In-Charge. |
| 125 | Removing old damage front ply, S&F new front ply 4mmthick BWR quality one side teak faceas per drg or as directed by Engineer-in-Charge. |
| 126 | Removing of old damagehooks, S&F new brass hookto Hat standand all as per drg or as directed by Engineer-In-Charge. |
| 127 | M&L for applying two coat ofwood polish high glossy/French polish all exposed wood surfaceas per drg or asdirected by Engineer-in-Charge. |
| 128 | Table Computer (TP) Removing old damaged top, S&F new Top as per existing shape and size, all as per drg or asdirected by Engr-in-Charge |
| 129 | Removing old damaged tray S&F new tray as per existing shape and size, all as per drg or asdirected by Engr-in-Charge |
| 130 | Removing old damaged shelf S&F new shelfas per existing shape and size, all as per drg or asdirected by Engr-in-Charge |
| 131 | Removing UNSV plastic shoes from Leg and S&F new hard plastic shoes of best quality of each leg as per drg or as directed by Engr-in-Charge. |
| 132 | M&L for spray painting with synthetic e namel OG paint/black as per drg completed as specified as directecd by Engr-in-Charge. |
| 133 | TV Trolly (MAP-TP) Removing of old damage Top of Table bed side S & F new18 mm thick pre-laminated praticale board Top,as per drg or as per existing shape and size directed by Engr-in-Charge. |
| 134 | Removing of old damageleft/right side,S & F new 18 mm partical board with teak venreed OSD left/right sideas per drg or as directed by Engineer-In-Charge. |
| 135 | Removing of old back side,S&F new18 mm partical board with teak venreed OSD to backsideas per drg or as directed byf Engineer-In-Charge. |
| 136 | Removing of old damage Fornt Glass , S&F New Front Glass size 600mm X 300mm x 6mm thickwith wooden frame as per drg or as directed by Engineer-In-Charge. |
| 137 | Removing of old damaged bottom of table, S&F New 18 mm partical board with teak venreed OSD bottomas per drg or as directed by Engineer-in-Charge. |
| 138 | Removing of damage old UNSV wheel S&F new wheel to chair revolving complete all as per specification or as directed Engr-in-Charge. |
| 139 | M&L for applying two coat ofwood polish high glossy/French polish all exposed wood surfaceas per drg or asdirected by Engineer-in-Charge. |