|
| 1 | Clearing of Grass and removal of rubbish upto a distance of 50 mtr outside the periphery of the area cleared. |
| 2 | Earth work in excavation by mechanical means( hydraulic excavator in trenches for foundations, drains,pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspitsand the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) with 20% boulders in walls drain etc. |
| 5 | Brickwork with common burnt clay of class designation 75 in foundation and plinth in 1:4 mix |
| 6 | Reinforced cement concrete work in beams ,suspended floors roofs, balconies, etc in ( 1:1.5:3) mix with 20mm n/size of agg. |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete upto plinth level.Thermo-Mechanically Treated bars . |
| 8 | 15mm thuck cement sand plaster in 1:6 mix |
| 9 | Providing and laying 50mm thick cement concrete flooring in (1:2:4) mix with 20mm nomial size of stone agg. |
| 10 | Providing and fixing ist quality ceramic glazed wall tiles conforming to is 156222 thicknessto be specified by the manufacture over 12mm thick bed of cement mortar of 1;3 mix |
| 11 | Providing and fixing aluminium work for doors windows ventilators and partitions with extruded built up section standard tabular section appropriate z section and other section of approved make confirming to is 733 etc complete as per specification and diection of I/C Engineer powder coated aluminium minimum thickness of powder coated 50 microns Chowkhats |
| 12 | For Shutters of doors etc |
| 13 | Providing and fixing glazing in Aluminuim doors windows ventilators shutters partitions etc with EPDM neoprene gasket etc with float glass panes of 5mm thickness wt. not less than 12.50kg/sqm |
| 14 | Providing and fixing 12mm prelaminated particle board flat pressed three layer or graded wood particlein panelling fixed in aluminium doors windows shuutersetc particle board with decorarive lamination on both sides |
| 15 | Providing and fixing of Aluminum fitting and fixturesHinges 125*65*212 mm |
| 16 | Handles 125mm |
| 17 | tower bolts |
| 18 | Arl drop |
| 19 | Providing and fixing of structural steel work in built up section trusses and framed work including cutting hoisting fixing in postion applying a priming coat compltete welded |
| 20 | Renewing glass panes with wooden fillets wherever necessary with float glass panes 4mmm thicknesss and wt. not less than 10kg/sqm |
| 21 | Making the opening for doors/windows /clerestorey window in brick masonry including dismantling in floors walls by cutting masonry and makung good the walls etc . complete to match the existing surface including disposal of surface. |
| 22 | Providing and fixing water closetsquating pan Indain type w.c pan with 100mm sand cast iron from p or s trap 10 litre low level flushing cistern including flush pipe and manually controlled lever device with all fitting and fixtures complteteetc all incuding cutting and making good the wall. |
| 23 | Providing and fixing wash basin with CI brackets 15mm C.P brass pillars taps 32mm cp brass waste of standard patternincluding cuuting and making good the walls with white vitreous china wash basin 630* 450mm with a pais of 15mm CP brass pillars taps |
| 24 | Providing and fixing of Wash basin mixer of approved make |
| 25 | Providing and Fixing of Bibcock of approved make etc complete |
| 26 | Providing and fixing of CP grating 100mm |
| 27 | Providing and fixing of GI pipes complete with GI fiitings15mm dia |
| 28 | 20mm |
| 29 | 65mm |
| 30 | Carriage of Sand for an Avg. distance of20 KM by MT |
| 31 | Carriage of bajri for anAvg. distance of 50 KM by MT |
| 32 | Carriage of bricksfor anAvg distanmce 120KM by MT |
