Tender For Urgent Maintenance Of Road From Manurmukh To Birchandramanu (L-13.55 Km) Under Belonia Pwd(Randb) Sub-Division During The Year 2023-24 From Ch.5.00 Km To 9.00 Km
Tender Value
24.14 Lakhs
Estimated cost
Bid Submission
08 Sep 2023
0 days left
EMD
48286
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Urgent Maintenance Of Road From Manurmukh To Birchandramanu ( L-13.55 Km ) Under Belonia Pwd ( Randb ) Sub-Division During The Year 2023-24 From Ch.5.00 Km To 9.00 Km Grouting, Patch Carpeting, Palasiding, Bats Filling, Landslide Clearing, Road Side Katcha Drain And Allied Works
BOQ
| Sl. No. | Item Description |
| 1 | Single bamboo palasiding/walling of whole 2nd class bamboo (Jati or Bethua) 65 to 75 mm dia and closely packed & driven @ 150 mm c/c including fitting fixing with half bamboo kamis horizontally in three rows with cane or tying with wire complete and struts 1.5 m apart longitudinally and providing bitumen drum sheet walling fixed with nails as per drawing and MoRD technical specification Clause 1302.5.A. Driven at least 900 mm below ground and 900 mm above ground on average |
| 2 | Construction of Embankment with Material Obtained from Borrow PitsConstruction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per MoRD Technical Specification Clause 301.5. |
| 3 | Supplying of brick bats (mixed class) and laying the same in road depressions and stretches including spreading one layer of blinding materials to make it good to proper grade and camber and consolidation with hand roller as per direction of the Engineer-in-charge. |
| 4 | Cutting of Branches of Trees Shrubs and Trimming of Grass and WeedsTrimming of grass and weeds from the shoulders/berms and disposing off the same to suitable location as per MoRD technical specification Clause 1914. |
| 5 | Providing and placing gunny/ polythene (of minimum wall thickness of 500 micron) bags filled with sand (of minimum qty of 0.034 cum) and properly manually stitched to avoid any leakage of sand as per specification. |
| 6 | Removal of land slide in different stretches including loading, unloading and disposal upto 3000 m bymechanically lead as per direction of the Engineer in-Charge |
| 7 | Surface DrainsConstruction of unlined surface drains of average cross sectional area 0.40 Sqm in ordinary soil to specified lines, grades levels and dimensions. Excavated material to be used in embankment with a lift upto 3m and lead of 50m (average lead 25m) as per MoRD Technical Specification Clause 307.I. Surface drains in ordinary soila) Manual means |
| 8 | Patch repairing / Maintenance of bituminous surface road using Jhama brick aggregate & Viscosity Gradedbitumen (VG-30)Repairing pot-holes and making up small depressions with ramming or power rolling after removal/ disposal of disintegrated materials within a lead of 50 m, cutting pot holes to regular shapes with vertical edges and levelling the bottom, cleaning the same with compressed air or any other appropriate method including screening, cleaning of aggregates; and filling up with jhama chips using bitumen of VG-30 @54 Kg per m3 of loose volume of jhama brick chips, after applying tack coat of bitumen on sides and bottom @ 0.75 kg/sqm and finishing the top of repaired surface levelled with adjoining area in proper grade and camber including spreading of sand @ 0.006 cum/sqm of prepared road surface as per direction of the Engineer-in-Charge and all as per MoRD technical specification Clauses 1900, 502, 503 and 504. |
| 9 | Tack Coat using hot straight run bitumen of grade VG-30 on bituminous surfaceProviding and applying tack coat using hot straight run bitumen of grade VG-30, including heating the bitumen, spraying the bitumen, cleaning and preparing the existing road surface as per specifications: on bituminous surface @ 0.50 Kg/Sqm. |
| 10 | 20 mm thick Open-Graded Premix Carpet using Bituminous (Viscosity grade / modified bitumen) BinderProviding, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using Viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 508Case - I: By Manual MeansBitumenofVG-30 |
| 11 | Seal CoatProviding and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 510.A. By Manual Meansi) Case - IV : Type D (premix with fine sand)a) Bitumen of VG-30 |
AI Tender Summary
Tender Timeline
Aug 18, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 08, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender