Tender For Development Of Ro-Pax Jetty And Allied Infrastructure Connecting Balugaon In Khurda District And Krushnaprasad Gada In Puri District, Odisha Under Sagarmala, Balugaon-Odisha

TDR : 39200270

Tender Notice
Corrigendum Details
BOQ

Expired

Balugaon , Odisha

Tender Brief : Corrigendum : Tender For Development Of Ro-Pax Jetty And Allied Infrastructure Connecting Balugaon In Khurda District And Krushnaprasad Gada In Puri District, Odisha Under Sagarmala

Document Fees
₹ 10000 /-

EMD
₹ 3200000.0 /-

Tender Value
₹ 31.37 Crore /-

Submission Date
25-09-2023

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	21-09-2023	Corrigendum	Date	25-09-2023

Name of Work: Development of Ro-Pax Jetty and allied infrastructure connecting Balugaon in Khurda District and Krushnaprasad Gada in Puri District, Odisha under Sagarmala

Sl. No.	Item Description
1	BALUGAON MODULE-1 - Setting up the piling gantry and connected equipment over each pile location, including cost of shifting, cost of all materials for (1000mm Dia Pile) piling gantry, labour, setting up the rig to alignment and correct dimensions as shown in the drawing and as directed by the Engineer-in-Charge.
2	Providing and fabricating M.S.liners confirming to IS specifications of SAIL of specified thickness for required length with M.S. shoes of 1.0m height using 8mm thick M.S. plates for bored vertical pile measured from cut off level of pile to the terminating level including supplying, cutting, rolling, bending, handling and welding cost, labours, materials, accessories,all taxes, hire and running charges of all machineries, royality, labour, material, T&P, conveyance charges, Port entry fees etc. all complete as per drawings and specification as directed by Engineer-In-charge.Note:- The stiffener shall be measured under this item.In case the soil strata found to be not good in the founding level of the liner, extra depth may be provided as per site condition.
3	Boring through all types of soils, boulders, hard starta and rocks etc.. for 1000mm Dia vertical bored piles from the existing ground level 0 mCD to the founding level(-)32.0m CD of the piles, including bailing, flushing the bore bentonite with required density, chiselling, shifting of materials etc.. complete as per directed by the Engineer-In-charge.Note:-i)In case the soil stratum at the founding level is loose the Engineer orhis representative may direct the contractor to carryout additional length of boring and payment shall be made accordingly. ii)The sample of bored materials of regular interval shall be collected and produced for the verification of the Engineer or his representative at no extra cost . in case any test reqiured by engineer in-charge,bored the samples so collected shall be referred to an authorized laboratory / agency identified by the Engineer , cost for testing shall be included in the quoted rate. engineer in-charge decision regarding founding level is final.`no claims in this regards are entertained. iii)Boring through all type of soil strata means soft soil, weathered rock,cemented sand, boulders and hard rock etc.,iv)The boring in all type of soilmeasurement will be made on the basis of depth of boring from encountered soft soil level to founding/pile termination level.v)All the boring depths shall be jointly measured actually at site and Engineer in-charge decision is final.
4	Chiseling/Breaking using suitable tools and equipmentsthe top of pile concrete up to the receipt of dense concrete and dressing the pile head suitably so as to receive the form work for deck work , including breaking to the required level exposing the pile reinforcement to sufficient length as per approved drawing for embedding into the coping beam etc. including removal of concrete debris from the site, supply of all labour, material, transportation cost, hire and running charges of all machineries complete for 1000mm dia piles as directed by the Engineer-In-Charge.
5	Providing and laying reinforced cement concrete in concrete mix M40 for pile excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
6	Providing and laying reinforced cement concrete in concrete mix M40 for Precast Pile muff excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
7	Providing and laying reinforced cement concrete in concrete mix M40 forInsitu Beam excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
8	Providing and laying reinforced cement concrete in concrete mix M40 forInsitu Slab excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
9	Providing and laying reinforced cement concrete in concrete mix M40 for wearing coat as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
10	Providing and laying reinforced cement concrete in concrete mix M40 for Service Trench excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
11	Fabricating and placing in position of steel reinforcement TMT bars(Fe 500D)confirming toIS 1786 specifications of SAIL/RINL/TISCONfor all reinforced cement concrete pileincluding lifting hook, cutting, bending, tying with 16 gauge G.I. binding wire and welding to proper specifications wherever required including cost of steel and binding wire, cover blocks of 100mm dia in CC M40 mix, supply of with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
12	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Precast pile muff including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
13	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Main Beamsincluding cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
14	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Long Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
15	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Fender Column including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
16	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Slabincluding cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
17	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Service Trenchincluding cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
18	Conducting High Strain Dynamic Test as per standard practices(ASTMD 4945 of 1989) The rate is inclusive of testing, hire charges for all equipments like transducers, strain gauge, oscilloscope hammer crane and cost of development of pile concrete with line and dismantling the developed length of concrete, transportation of equipment, labour and furnishing the test result etc., complete and as directed by the EIC.
19	Supplying, handling, transporting and fixing in position ofV fender with anchor bolts, U hooks, Chains,shall be hot dip G.I coating with 80micron including cutting, concrete chipping, drilling, grouting, necessary welding with deck reinforcement steel and necessary coal tar painting(wherever required) including all materials, labour, consumable items, machineries, tools, tackles,transportation etc... and complete as per Engineer Incharge.
20	Supplying, handling, transporting and fixing in position of Cast iron Bollard (20T ton capacity)with necessary cutting, concrete chipping, drilling, grouting, welding with deck reinforcement steel and necessary coal tar painting(wherever required) including all materials, labour , consumable items etc.complete as per drawing and specifications as directed by the EIC.
21	Provision for3\" PVC Pipe cabling forlighting fixures inside the RCC as per the site requirement.
22	BALUGAON MODULE-2 - Setting up the piling gantry and connected equipment over each pile location, including cost of shifting, cost of all materials for (750mm & 1000mm Dia Pile) piling gantry, labour, setting up the rig to alignment and correct dimensions as shown in the drawing and as directed by the EIC.
23	Providing and fabricating M.S.liners confirming to IS specifications of SAIL of specified thickness for required length with M.S. shoes of 1.0m height using 8mm thick M.S. plates for bored vertical pile measured from cut off level of pile to the terminating level including supplying, cutting, rolling, bending, handling and welding cost, labours, materials, accessories,all taxes, hire and running charges of all machineries, royality, labour, material, T&P, conveyance charges, Port entry fees etc. all complete as per drawings and specification as directed by Engineer-In-chargeNote:- The stiffener shall be measured under this item.In case the soil strata found to be not good in the founding level of the liner, extra depth may be provided as per site condition.
24	Boring through all types of soils, boulders, hard starta and rocks etc.. for vertical bored piles (750 mm dia pile) from the existing ground level 0 mCD to the founding level(-)32.0m CD of the piles, including bailing, flushing the bore bentonite with required density, chiselling, shifting of materials etc.. complete as per directed by the Engineer-In-charge.Note:-i)In case the soil stratum at the founding level is loose the Engineer orhis representative may direct the contractor to carryout additional length of boring and payment shall be made accordingly. ii)The sample of bored materials of regular interval shall be collected and produced for the verification of the Engineer or his representative at no extra cost . in case any test reqiured by engineer in-charge,bored the samples so collected shall be referred to an authorized laboratory / agency identified by the Engineer , cost for testing shall be included in the quoted rate. engineer in-charge decision regarding founding level is final.`no claims in this regards are entertained. iii)Boring through all type of soil strata means soft soil, weathered rock,cemented sand, boulders and hard rock etc., iv)The boring in all type of soilmeasurement will be made on the basis of depth of boring from encountered soft soil level to founding/pile termination level.v)All the boring depths shall be jointly measured actually at site and Engineer in-charge decision is final.
25	Chiseling/Breaking using suitable tools and equipmentsthe top of pile (750 mm dia pile) concrete up to the receipt of dense concrete and dressing the pile head suitably so as to receive the form work for deck work , including breaking to the required level exposing the pile reinforcement to sufficient length as per approved drawing for embedding into the coping beam etc. including removal of concrete debris from the site, supply of all labour, material, transportation cost, hire and running charges of all machineries complete as directed by the Engineer-In-Charge.
26	Providing and laying reinforced cement concrete in concrete mix M40 for pile excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
27	Providing and laying reinforced cement concrete in concrete mix M40 for Precast Pile muff excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
28	Providing and laying reinforced cement concrete in concrete mix M40 forInsitu Beam excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
29	Providing and laying reinforced cement concrete in concrete mix M40 forInsitu Slab excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
30	Providing and laying reinforced cement concrete in concrete mix M40 for wearing coat as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
31	Providing and laying reinforced cement concrete in concrete mix M40 for Service Trench excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
32	Fabricating and placing in position of steel reinforcement TMT bars(Fe 500D)confirming toIS 1786 specifications of SAIL/RINL/TISCONfor all reinforced cement concrete pileincluding lifting hook, cutting, bending, tying with 16 gauge G.I. binding wire and welding to proper specifications wherever required including cost of steel and binding wire, cover blocks of 100mm dia in CC M40 mix, supply of with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
33	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for precast pile muff including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
34	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Main Beamsincluding cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
35	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Long Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
36	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Fender Column including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
37	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Slabincluding cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
38	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Serice Trench including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees,etc. all complete as directed by the Engineer-In-Charge.
39	Conducting High Strain Dynamic Test as per standard practices(ASTMD 4945 of 1989) The rate is inclusive of testing, hire charges for all equipments like transducers, strain gauge, oscilloscope hammer crane and cost of development of pile concrete with line and dismantling the developed length of concrete, transportation of equipment, labour and furnishing the test result etc., complete and as directed by the EIC.
40	Supplying, handling, transporting and fixing in position ofV fender with anchor bolts, U hooks, Chains,shall be hot dip G.I coating with 80micron including cutting, concrete chipping, drilling, grouting, necessary welding with deck reinforcement steel and necessary coal tar painting(wherever required) including all materials, labour, consumable items, machineries, tools, tackles,transportation etc... and complete as per Engineer Incharge.
41	Supplying, handling, transporting and fixing in position of Cast iron Bollard (20T ton capacity)with necessary cutting, concrete chipping, drilling, grouting, welding with deck reinforcement steel and necessary coal tar painting(wherever required) including all materials, labour , consumable items etc.complete as per drawing and specifications as directed by the EIC.
42	Provision for3\" PVC Pipe cabling forlighting fixures inside the RCC as per the site requirement.
43	BALUGAON MODULE-3 - Setting up the piling gantry and connected equipment over each pile location, including cost of shifting, cost of all materials for (1000mm Dia Pile) piling gantry, labour, setting up the rig to alignment and correct dimensions as shown in the drawing and as directed by the EIC.
44	Providing and fabricating M.S.liners confirming to IS specifications of SAIL of specified thickness for required length with M.S. shoes of 1.0m height using 8mm thick M.S. plates for bored vertical pile measured from cut off level of pile to the terminating level including supplying, cutting, rolling, bending, handling and welding cost, labours, materials, accessories,all taxes, hire and running charges of all machineries, royality, labour, material, T&P, conveyance charges, Port entry fees etc. all complete as per drawings and specification as directed by Engineer-In-charge.Note:- The stiffener shall be measured under this item.In case the soil strata found to be not good in the founding level of the liner, extra depth may be provided as per site condition.
45	Boring through all types of soils, boulders, hard starta and rocks etc.. for vertical bored piles (1000 mm dia pile) from the existing ground level 0 mCD to the founding level(-)32.0m CD of the piles, including bailing, flushing the bore bentonite with required density, chiselling, shifting of materials etc.. complete as per directed by the Engineer-In-charge.Note:-i)In case the soil stratum at the founding level is loose the Engineer orhis representative may direct the contractor to carryout additional length of boring and payment shall be made accordingly. ii)The sample of bored materials of regular interval shall be collected and produced for the verification of the Engineer or his representative at no extra cost . in case any test reqiured by engineer in-charge,bored the samples so collected shall be referred to an authorized laboratory / agency identified by the Engineer , cost for testing shall be included in the quoted rate. engineer in-charge decision regarding founding level is final.`no claims in this regards are entertained. iii)Boring through all type of soil strata means soft soil, weathered rock,cemented sand, boulders and hard rock etc.,iv)The boring in all type of soilmeasurement will be made on the basis of depth of boring from encountered soft soil level to founding/pile termination level.v)All the boring depths shall be jointly measured actually at site and Engineer in-charge decision is final.
46	Chiseling/Breaking using suitable tools and equipmentsthe top of pile concrete up to the receipt of dense concrete and dressing the pile head suitably so as to receive the form work for deck work , including breaking to the required level exposing the pile reinforcement to sufficient length as per approved drawing for embedding into the coping beam etc. including removal of concrete debris from the site, supply of all labour, material, transportation cost, hire and running charges of all machineries complete for 1000mm dia piles as directed by the Engineer-In-Charge.
47	Providing and laying reinforced cement concrete in concrete mix M40 for pile excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
48	Providing and laying reinforced cement concrete in concrete mix M40 for Precast Pile muff excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
49	Providing and laying reinforced cement concrete in concrete mix M40 forInsitu Beam excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
50	Providing and laying reinforced cement concrete in concrete mix M40 forInsitu Slab excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
51	Providing and laying reinforced cement concrete in concrete mix M40 for wearing coat as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
52	Providing and laying reinforced cement concrete in concrete mix M40 for Service Trench excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
53	Fabricating and placing in position of steel reinforcement TMT bars(Fe 500D)confirming toIS 1786 specifications of SAIL/RINL/TISCONfor all reinforced cement concrete pileincluding lifting hook, cutting, bending, tying with 16 gauge G.I. binding wire and welding to proper specifications wherever required including cost of steel and binding wire, cover blocks of 100mm dia in CC M40 mix, supply of with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
54	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for precast pile muff including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
55	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Main Beamsincluding cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
56	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Long Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
57	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Fender Column including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
58	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Slabincluding cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
59	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Serice Trench including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees,etc. all complete as directed by the Engineer-In-Charge.
60	Conducting High Strain Dynamic Test as per standard practices(ASTMD 4945 of 1989) The rate is inclusive of testing, hire charges for all equipments like transducers, strain gauge, oscilloscope hammer crane and cost of development of pile concrete with line and dismantling the developed length of concrete, transportation of equipment, labour and furnishing the test result etc., complete and as directed by the EIC.
61	Supplying, handling, transporting and fixing in position ofV fender with anchor bolts, U hooks, Chains,shall be hot dip G.I coating with 80micron including cutting, concrete chipping, drilling, grouting, necessary welding with deck reinforcement steel and necessary coal tar painting(wherever required) including all materials, labour, consumable items, machineries, tools, tackles,transportation etc... and complete as per Engineer Incharge.
62	Supplying, handling, transporting and fixing in position of Cast iron Bollard (20T ton capacity)with necessary cutting, concrete chipping, drilling, grouting, welding with deck reinforcement steel and necessary coal tar painting(wherever required) including all materials, labour , consumable items etc.complete as per drawing and specifications as directed by the EIC.
63	Provision for3\" PVC Pipe cabling forlighting fixures inside the RCC as per the site requirement.
64	BALUGAON RAMP - Setting up the piling gantry and connected equipment over each pile location, including cost of shifting, cost of all materials for (1000mm Dia Pile) piling gantry, labour, setting up the rig to alignment and correct dimensions as shown in the drawing and as directed by the EIC.
65	Providing and fabricating M.S.liners confirming to IS specifications of SAIL of specified thickness for required length with M.S. shoes of 1.0m height using 8mm thick M.S. plates for bored vertical pile measured from cut off level of pile to the terminating level including supplying, cutting, rolling, bending, handling and welding cost, labours, materials, accessories,all taxes, hire and running charges of all machineries, royality, labour, material, T&P, conveyance charges, Port entry fees etc. all complete as per drawings and specification as directed by Engineer-In-charge.Note:- The stiffener shall be measured under this item.In case the soil strata found to be not good in the founding level of the liner, extra depth may be provided as per site condition.
66	Boring through all types of soils, boulders, hard starta and rocks etc.. for vertical bored piles (1000 mm dia pile) from the existing ground level 0 mCD to the founding level(-)32.0m CD of the piles, including bailing, flushing the bore bentonite with required density, chiselling, shifting of materials etc.. complete as per directed by the Engineer-In-charge.Note:-i)In case the soil stratum at the founding level is loose the Engineer orhis representative may direct the contractor to carryout additional length of boring and payment shall be made accordingly. ii)The sample of bored materials of regular interval shall be collected and produced for the verification of the Engineer or his representative at no extra cost . in case any test reqiured by engineer in-charge,bored the samples so collected shall be referred to an authorized laboratory / agency identified by the Engineer , cost for testing shall be included in the quoted rate. engineer in-charge decision regarding founding level is final.`no claims in this regards are entertained. iii)Boring through all type of soil strata means soft soil, weathered rock,cemented sand, boulders and hard rock etc.,iv)The boring in all type of soilmeasurement will be made on the basis of depth of boring from encountered soft soil level to founding/pile termination level.v)All the boring depths shall be jointly measured actually at site and Engineer in-charge decision is final.
67	Chiseling/Breaking using suitable tools and equipmentsthe top of pile concrete up to the receipt of dense concrete and dressing the pile head suitably so as to receive the form work for deck work , including breaking to the required level exposing the pile reinforcement to sufficient length as per approved drawing for embedding into the coping beam etc. including removal of concrete debris from the site, supply of all labour, material, transportation cost, hire and running charges of all machineries complete for 1000mm dia piles as directed by the Engineer-In-Charge.
68	Providing and laying reinforced cement concrete in concrete mix M40 for pile excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
69	Providing and laying reinforced cement concrete in concrete mix M40 for Precast Pile muff excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
70	Providing and laying reinforced cement concrete in concrete mix M40 forInsitu Beam excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
71	Providing and laying reinforced cement concrete in concrete mix M40 forInsitu Slab excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
72	Providing and laying reinforced cement concrete in concrete mix M40 for wearing coat as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
73	Fabricating and placing in position of steel reinforcement TMT bars(Fe 500D)confirming toIS 1786 specifications of SAIL/RINL/TISCONfor all reinforced cement concrete pileincluding lifting hook, cutting, bending, tying with 16 gauge G.I. binding wire and welding to proper specifications wherever required including cost of steel and binding wire, cover blocks of 100mm dia in CC M40 mix, supply of with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
74	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for precast pile muff including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
75	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Long Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
76	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Slabincluding cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
77	Conducting High Strain Dynamic Test as per standard practices(ASTMD 4945 of 1989) The rate is inclusive of testing, hire charges for all equipments like transducers, strain gauge, oscilloscope hammer crane and cost of development of pile concrete with line and dismantling the developed length of concrete, transportation of equipment, labour and furnishing the test result etc., complete and as directed by the EIC.
78	Provision for3\" PVC Pipe cabling forlighting fixures inside the RCC as per the site requirement.
79	BALUGAON REMOVAL OF EARTHEN BUND-Earth work in excavation of foundation in Ordinary soil within 50m initial lead &1.5 M initial lift including rough dressing and leveling the bed and depositing the excavated materials away from the working areas as directed by the Engineer-in-Charge.
80	Earth work in excavation of foundationin hard soilwith in50m initial lead & 1.5m extra lift over the initial lift including rough dressing and levelling the bed as per thedirected by the Engineer-in-Charge.
81	Dismantaling and removing cement concrete including stacking the useful materials for reuse and removing the debris within 50m lead and depositing the excavated materials away from the working areas as directed by the Engineer-in-Charge.
82	Dismantaling dry or grouted rough stone revetments of approns for retaining walls and stacking the stones for reuse as directed by the Engineer-in-Charge.
83	BALUGAON OVERHEAD TANK-Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Fender Column including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
84	Providing and laying reinforced cement concrete in concrete mix M40 forInsitu Beam excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
85	Providing and laying reinforced cement concrete in concrete mix M40 forInsitu Slab excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
86	Fabricating and placing in position of steel reinforcement TMT bars(Fe 500D)confirming toIS 1786 specifications of SAIL/RINL/TISCONfor all reinforced cement concrete including lifting hook, cutting, bending, tying with 16 gauge G.I. binding wire and welding to proper specifications wherever required including cost of steel and binding wire, cover blocks of 100mm dia in CC M40 mix, supply of with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
87	Supplying & fixing on wall surface Following dia Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including Supplying & fixing the pipe with clamps at 1.00 m spacing & jointing of pipes & fittings with one step CPVC solvent cement including making good the wall & Floor and testing of joints complete as per direction of Engineer-in-Charge.
88	Fixing 2000 litre capacity Triple Layerwater storage tanks (WHITE) conforming to 1S:12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc. all complete as per specification and direction of the Engineer in charge.
89	Extra over for hoisting vertical water storage tanks of the following size for every additional height of 5 metres or part thereof .
90	BALUGAON PUMP HOUSE-Earthwork excavation for foundationin all soils and sub soils and to the full depth as may be directed except hard rock requiring blasting inclusive of shoring, strutting and waterwhere ever bailing out including necessary refilling the sides of foundation with excavated earth than and deposited the surplus earth as directed by department officer with all heads & lifts etc., completed as per standard specifications.
91	Filling in foudation and plinth with filling sand from approved quarry with all leads, lifts and delifts including cost, conveyance, royality, taxes, Labour & labour cess, well wateringetc. completeas per specification and direction of the Engineer in charge.
92	P.C.C of (1:3:6 ) with 4 cm down H.G.C.B metal includig hoisting, laying, compacting, curing and wateringetc. with all t&P required for the work including cost con veyance royality and all other taxes of materials compelte in all respect as per Engineer in charge.
93	Brick works with fly ash bricks 23 cm x 11 cm x 8 cm size having crushing strength not less than75 Kg/ cm2 with dimensional tolerance +or - 2% in cement mortar (1:6) in Super structure including cost conveyance,royality and all other taxes of materials etc. with curing complete in all respect as per specification and directon of Engineer in Charge.
94	Brick works with fly ash bricks 23 cm x 11 cm x 8 cm size having crushing strength not less than75 Kg/ cm2 with dimensional tolerance +or - 2% in cement mortar (1:6) in Super structure including cost conveyance,royality and all other taxes of materials etc. with curing complete in all respect as per specification and directon of Engineer in Charge.
95	Providing and laying reinforced cement concrete in concrete mix M35 for Slab excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
96	Providing and laying reinforced cement concrete in concrete mix M35 for Wall excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
97	16 mm thick cement plaster in cement mortor (1:6) over brick masonary including cost and conveyance of all materials with all the taxes, royality, labour, T & P required for the work etc. complete as directed by the Engineer-in-charge.
98	Providing and laying reinforced cement concrete in concrete mix M35 for Beam excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
99	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Slab including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
100	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Column including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
101	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Tank beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
102	Cement concrete (1:2:4) using 12 mm size hard granite chips of approved quarry including royality and all taxes etc complete in all respact as per direction of Engineer in charge.
103	Priming one coat with approved Water bound cementprimer including cost of primer, materials,taxes , labour, labour cess, and T&P etc. requiredto complete the work in all respect as directed by the Engineer-in-Charge.
104	Finishingsurface of walls with cement based wall putty ( Water Based ) of approved make including cost of paint, materials,taxes , labour, labour cess, and T&P etc. requiredto complete the work in all respect as directed by the Engineer-in-Charge.
105	Finishing walls with Weather coat (ISI) of approved shade in new work two coats to give an even shade including cost of paint, materials,taxes , labour, labour cess, and T&P etc. requiredto complete the work in all respect as directed by the Engineer-in-Charge.
106	Painting 2 coats to walls with Plastic emulsion paint of approved shade on new work to give an even shade including cost of paint, materials,taxes , labour, labour cess, and T&P etc. requiredto complete the work in all respect as directed by the Engineer-in-Charge.
107	Supplying,fitting & fixing solid WPCdoor with Choukath with all cost, conveyance, taxes,labour,T&P, iron fittings and cleats etccomplete in all respect including the cost of all fittings.
108	BALUGAON UNDER GROUND SUMP-Earthwork excavation for foundationin all soils and sub soils and to the full depth as may be directed except hard rock requiring blasting inclusive of shoring, strutting and waterwhere ever bailing out including necessary refilling the sides of foundation with excavated earth than and deposited the surplus earth as directed by department officer with all heads & lifts etc., completed as per standard specifications.
109	Filling sand and moorum admixture(30:70) by admixing sand and moorum and consolidating with HRR including watering, cost and conveyance of all materials with all the taxes, royality, labour, T & P required for the work etc. complete as directed by the Engineer-in-charge.
110	P.C.C of (1:3:6 ) with 4 cm down H.G.C.B metal includig hoisting, laying, compacting, curing and wateringetc. with all t&P required for the work including cost con veyance royality and all other taxes of materials compelte in all respect as per Engineer in charge.
111	Providing and laying reinforced cement concrete in concrete mix M35 for Slab excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
112	Providing and laying reinforced cement concrete in concrete mix M35 for Wall excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
113	16 mm thick cement plaster in cement mortor (1:6) over brick masonary including cost and conveyance of all materials with all the taxes, royality, labour, T & P required for the work etc. complete as directed by the Engineer-in-charge.
114	Providing and laying reinforced cement concrete in concrete mix M35 for Beam excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
115	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Slab including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
116	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Wall including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
117	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Tank beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
118	BALUGAON-ELECTRIFICATION-Recessed wiring to Tube light point/Fan point/exhaust fan point with 1.5 sq.mm FR PVCinsulated single core multistrand copper conductor of ISI marked with 20mm dia non-metalic PVC flexible conduit with 5A,250V Modular type switch (Make Cona/Anchor/ Havels ) & ceiling rose(Make Cona/Anchor/ Havels ) mounted on MS Box having front bakelite cover of suitable sizewith1.0 Sq.mm FR PVC insulated single core multistrand copper conductor as earth wire includingall accessories and connections as per the direction of Engineer-in-charge.(Excluding the cost of supplying and fixing of 100mmx100mmx60mm MS Box with backlight cover -1no for Modular Switch)(Make-approved ISI Marked)(GROUP-B)
119	Recessed wiring to light point (For bulb) with 1.5 sq.mm FR PVCinsulated single core multistrand copper conductor of ISI marked with 20mm dia non-metalic PVC flexible conduit with 5A,250V Modular type switch (Make Cona/Anchor/ Havels ) & Angle Holder (Make Cona/Anchor/ Havels ) mounted on MS box having front bakelite cover of suitable size, MS box with1.0 Sq.mm FR PVC insulated single core multistrand copper conductor as earth wire includingall accessories and connections as per the direction of Engineer-in-charge. (Excluding the cost of supplying and fixing of 100mmx100mmx60mm MS Box with backlight cover -1no for Modular Switch) (Make-approved ISI Marked).(GROUP-A)
120	Supplying& fixing of 5 pin 5/6 amp Modular Type Switch and 5/6 amp Modular Type socket outleton the existing switch box/ cover including connections etc. required as per the direction of Engineer-in-charge.
121	Point wiring for6pin, 15/16 ampModular Socket outletwith 2x4 sq.mm FR PVCinsulated single core multistrand copper conductor of ISI marked in recess with 20mm dia non-metalic PVC flexible conduit with 20 A,250V Modular type Motor Starter switch, Modular Base and coverfor 4 modules suitable size ISI marked Modular GI box18 SWG and earthing point with 1 x 1.5 Sq.mm FR PVC insulated single core multistrand copper conductor for loop earth wire etc. as required includingall accessories and connections as per the direction of Engineer-in-charge. (Make-approved ISI Marked)
122	Installation,Testing and Commissioning of Stepped type ceiling fan regulator, in existing switch box including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor, earthing the regulator as required.
123	Supplying and drawing 1x1.5 sq.mm FR PVCinsulated single core multistrand copper conductor of ISI markedconfirming to IS 694/1990 inexisting surface/recessed PVC conduitas required includingall accessories and connections as per the direction of Engineer-in-charge. (Make of wire Finolex/ L&T/Anchor/ Havels/ V Guard).
124	Recessedwiring to sub-main in 2x2.5 sq.mm FR PVCinsulated single core multistrand copper conductor of ISI markedconfirming to IS 694/1990 in20mm dia non-metalic heavy dutyflexible conduit 1.6mm thick alongwith 1 x 1.5 Sq.mm FR PVC insulated single core multistrand copper conductor as earth wire etc. as required includingall accessories and connections as per the direction of Engineer-in-charge. (Make of wire Finolex/ L&T/Anchor/ Havels/ V Guard).
125	Recessedwiring to sub-main in 2x4 sq.mm FR PVCinsulated single core multistrand copper conductor of ISI markedconfirming to IS 694/1990 in20mm dia non-metalic heavy dutyflexible conduit 1.6mm thick alongwith 1 x 1.5 Sq.mm FR PVC insulated single core multistrand copper conductor as earth wire etc. as required includingall accessories and connections as per the direction of Engineer-in-charge.(Make-approved ISI Marked)
126	Supplying& fixing of 12 WAY , SPN, Double Door MCB-DBwith sheet steel enclosure, distribution board, on surface/ recess complete with tinned copper bus bar, neutral box bar, earth bar, din bar, detachable gland plate , inter connection , phospate & powder painted including earthing etc. as required (but without MCB/RCCB/Isolator) includingall accessories and connections as per the direction of Engineer-in-charge.(Make-approved ISI Marked)
127	Supplying& fixing of 6amp to 32amp rating 240V \"B\" series miniature circuit breaker suitable for lighting & other loads of the Single poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as per the direction of Engineer-in-charge.(Make-approved ISI Marked)
128	Supplying& fixing of Modular GI box for 2-modules, 18 SWG(Nominal size) on surface/ recess with suitable size of Modular Base & Cover in front including cutting the wall & making good the same in case of recessed conduit as required includingall accessories and connections as per the direction of Engineer-in-charge. (Make-approved ISI Marked)
129	Supplying& fixing of Modular GI box for 6-modules, 18 SWG(Nominal size) on surface/ recess with suitable size of Modular Base & Cover in front including cutting the wall & making good the same in case of recessed conduit as required includingall accessories and connections as per the direction of Engineer-in-charge. (Make-approved ISI Marked)
130	Installation, testing and Commissioning of Ceiling fan including wiring the down rods of standard length (upto 30 cm) with 1.5sq.mm FR PVC insulated single core multistrand copper conductor etc. Required as per the direction of Engineer-in-charge.(Make-approved ISI Marked)
131	Supplying& fixing of Fan Hook Box including cutting the RC Ceiling & making good the same includingcost of all materials, labour etc. required as per the direction of Engineer-in-charge. (Make-approved ISI Marked)
132	Recessedwiring for water pump with 4 sq.mm PVCinsulated aluminium black twin flat cable working voltage suitable upto 1100 Vof ISI markedas required includingall accessories and connections as per the direction of Engineer-in-charge.(Make-approved ISI Marked)
133	Supply and fixing of following sizes of PVC conduit along with accesories in recessed wiring including cutting the walland making good the same in case of recessed conduitas per the direction of Engineer-in-charge.(Make-approved ISI Marked)
134	Supplying& fixing of 6amp to 32amp rating 240V \"C\" series miniature circuit breaker suitable for Inductive load of the Double poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as per the direction of Engineer-in-charge.(Make-approved ISI Marked)
135	Supplying,fixing & fixing of 40 Watt LED solar mini mast street light .The Luminaire havee intigreted charge controller with LIFE P04 Battery (12.8v,18Ah) and 85 Wp PV module and Luminaries,8mtr cast iron pole (Design pole) single arm with panel box with instalation cost complete with connections testing and commissioning etc. as per the direction of Engineer-in-charge.
136	KRUSHNAPRASADA GADA MAIN JETTY - Setting up the piling gantry and connected equipment over each pile location, including cost of shifting, cost of all materials for (1000mm Dia Pile) piling gantry, labour, setting up the rig to alignment and correct dimensions as shown in the drawing and as directed by the Engineer-in-Charge.
137	Providing and fabricating M.S.liners confirming to IS specifications of SAIL of specified thickness for required length with M.S. shoes of 1.0m height using 8mm thick M.S. plates for bored vertical pile measured from cut off level of pile to the terminating level including supplying, cutting, rolling, bending, handling and welding cost, labours, materials, accessories,all taxes, hire and running charges of all machineries, royality, labour, material, T&P, conveyance charges, Port entry fees etc. all complete as per drawings and specification as directed by Engineer-In-charge.Note:- The stiffener shall be measured under this item.In case the soil strata found to be not good in the founding level of the liner, extra depth may be provided as per site condition.
138	Boring through all types of soils, boulders, hard starta and rocks etc.. for 1000mm Dia vertical bored piles from the existing ground level 0 mCD to the founding level(-)32.0m CD of the piles, including bailing, flushing the bore bentonite with required density, chiselling, shifting of materials etc.. complete as per directed by the Engineer-In-charge.Note:-i)In case the soil stratum at the founding level is loose the Engineer orhis representative may direct the contractor to carryout additional length of boring and payment shall be made accordingly. ii)The sample of bored materials of regular interval shall be collected and produced for the verification of the Engineer or his representative at no extra cost . in case any test reqiured by engineer in-charge,bored the samples so collected shall be referred to an authorized laboratory / agency identified by the Engineer , cost for testing shall be included in the quoted rate. engineer in-charge decision regarding founding level is final.`no claims in this regards are entertained. iii)Boring through all type of soil strata means soft soil, weathered rock,cemented sand, boulders and hard rock etc.,iv)The boring in all type of soilmeasurement will be made on the basis of depth of boring from encountered soft soil level to founding/pile termination level.v)All the boring depths shall be jointly measured actually at site and Engineer in-charge decision is final.
139	Chiseling/Breaking using suitable tools and equipmentsthe top of pile concrete up to the receipt of dense concrete and dressing the pile head suitably so as to receive the form work for deck work , including breaking to the required level exposing the pile reinforcement to sufficient length as per approved drawing for embedding into the coping beam etc. including removal of concrete debris from the site, supply of all labour, material, transportation cost, hire and running charges of all machineries complete for 1000mm dia piles as directed by the Engineer-In-Charge.
140	Providing and laying reinforced cement concrete in concrete mix M40 for pile excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
141	Providing and laying reinforced cement concrete in concrete mix M40 for Precast Pile muff excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
142	Providing and laying reinforced cement concrete in concrete mix M40 forInsitu Beam excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
143	Providing and laying reinforced cement concrete in concrete mix M40 forInsitu Slab excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
144	Providing and laying reinforced cement concrete in concrete mix M40 for wearing coat as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
145	Providing and laying reinforced cement concrete in concrete mix M40 for Service Trench excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
146	Fabricating and placing in position of steel reinforcement TMT bars(Fe 500D)confirming toIS 1786 specifications of SAIL/RINL/TISCONfor all reinforced cement concrete pileincluding lifting hook, cutting, bending, tying with 16 gauge G.I. binding wire and welding to proper specifications wherever required including cost of steel and binding wire, cover blocks of 100mm dia in CC M40 mix, supply of with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
147	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Precast pile muff including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
148	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Main Beamsincluding cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
149	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Long Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
150	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Fender Column including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
151	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Slabincluding cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
152	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Service Trenchincluding cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
153	Conducting High Strain Dynamic Test as per standard practices(ASTMD 4945 of 1989) The rate is inclusive of testing, hire charges for all equipments like transducers, strain gauge, oscilloscope hammer crane and cost of development of pile concrete with line and dismantling the developed length of concrete, transportation of equipment, labour and furnishing the test result etc., complete and as directed by the EIC.
154	Supplying, handling, transporting and fixing in position ofV fender with anchor bolts, U hooks, Chains,shall be hot dip G.I coating with 80micron including cutting, concrete chipping, drilling, grouting, necessary welding with deck reinforcement steel and necessary coal tar painting(wherever required) including all materials, labour, consumable items, machineries, tools, tackles,transportation etc... and complete as per Engineer Incharge.
155	Supplying, handling, transporting and fixing in position of Cast iron Bollard (20T ton capacity)with necessary cutting, concrete chipping, drilling, grouting, welding with deck reinforcement steel and necessary coal tar painting(wherever required) including all materials, labour , consumable items etc.complete as per drawing and specifications as directed by the EIC.
156	Provision for3\" PVC Pipe cabling forlighting fixures inside the RCC as per the site requirement.
157	KRUSHNAPRASADA GADA LANDING JETTY -Setting up the piling gantry and connected equipment over each pile location, including cost of shifting, cost of all materials for (750mm & 1000mm Dia Pile) piling gantry, labour, setting up the rig to alignment and correct dimensions as shown in the drawing and as directed by the EIC.
158	Providing and fabricating M.S.liners confirming to IS specifications of SAIL of specified thickness for required length with M.S. shoes of 1.0m height using 8mm thick M.S. plates for bored vertical pile measured from cut off level of pile to the terminating level including supplying, cutting, rolling, bending, handling and welding cost, labours, materials, accessories,all taxes, hire and running charges of all machineries, royality, labour, material, T&P, conveyance charges, Port entry fees etc. all complete as per drawings and specification as directed by Engineer-In-chargeNote:- The stiffener shall be measured under this item.In case the soil strata found to be not good in the founding level of the liner, extra depth may be provided as per site condition.
159	Boring through all types of soils, boulders, hard starta and rocks etc.. for vertical bored piles (750 mm dia pile) from the existing ground level 0 mCD to the founding level(-)32.0m CD of the piles, including bailing, flushing the bore bentonite with required density, chiselling, shifting of materials etc.. complete as per directed by the Engineer-In-charge.Note:-i)In case the soil stratum at the founding level is loose the Engineer orhis representative may direct the contractor to carryout additional length of boring and payment shall be made accordingly. ii)The sample of bored materials of regular interval shall be collected and produced for the verification of the Engineer or his representative at no extra cost . in case any test reqiured by engineer in-charge,bored the samples so collected shall be referred to an authorized laboratory / agency identified by the Engineer , cost for testing shall be included in the quoted rate. engineer in-charge decision regarding founding level is final.`no claims in this regards are entertained. iii)Boring through all type of soil strata means soft soil, weathered rock,cemented sand, boulders and hard rock etc.,iv)The boring in all type of soilmeasurement will be made on the basis of depth of boring from encountered soft soil level to founding/pile termination level.v)All the boring depths shall be jointly measured actually at site and Engineer in-charge decision is final.
160	Chiseling/Breaking using suitable tools and equipmentsthe top of pile (750 mm dia pile) concrete up to the receipt of dense concrete and dressing the pile head suitably so as to receive the form work for deck work , including breaking to the required level exposing the pile reinforcement to sufficient length as per approved drawing for embedding into the coping beam etc. including removal of concrete debris from the site, supply of all labour, material, transportation cost, hire and running charges of all machineries complete as directed by the Engineer-In-Charge.
161	Providing and laying reinforced cement concrete in concrete mix M40 for pile excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
162	Providing and laying reinforced cement concrete in concrete mix M40 for Precast Pile muff excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
163	Providing and laying reinforced cement concrete in concrete mix M40 forInsitu Beam excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
164	Providing and laying reinforced cement concrete in concrete mix M40 forInsitu Slab excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
165	Providing and laying reinforced cement concrete in concrete mix M40 for wearing coat as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
166	Fabricating and placing in position of steel reinforcement TMT bars(Fe 500D)confirming toIS 1786 specifications of SAIL/RINL/TISCONfor all reinforced cement concrete pileincluding lifting hook, cutting, bending, tying with 16 gauge G.I. binding wire and welding to proper specifications wherever required including cost of steel and binding wire, cover blocks of 100mm dia in CC M40 mix, supply of with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
167	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for precast pile muff including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
168	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Main Beamsincluding cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
169	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Long Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
170	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Slabincluding cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
171	Conducting High Strain Dynamic Test as per standard practices(ASTMD 4945 of 1989) The rate is inclusive of testing, hire charges for all equipments like transducers, strain gauge, oscilloscope hammer crane and cost of development of pile concrete with line and dismantling the developed length of concrete, transportation of equipment, labour and furnishing the test result etc., complete and as directed by the EIC.
172	Provision for3\" PVC Pipe cabling forlighting fixures inside the RCC as per the site requirement.
173	KRUSHNAPRASADA GADA RAMP -Setting up the piling gantry and connected equipment over each pile location, including cost of shifting, cost of all materials for (1000mm Dia Pile) piling gantry, labour, setting up the rig to alignment and correct dimensions as shown in the drawing and as directed by the EIC.
174	Providing and fabricating M.S.liners confirming to IS specifications of SAIL of specified thickness for required length with M.S. shoes of 1.0m height using 8mm thick M.S. plates for bored vertical pile measured from cut off level of pile to the terminating level including supplying, cutting, rolling, bending, handling and welding cost, labours, materials, accessories,all taxes, hire and running charges of all machineries, royality, labour, material, T&P, conveyance charges, Port entry fees etc. all complete as per drawings and specification as directed by Engineer-In-charge.Note:- The stiffener shall be measured under this item.In case the soil strata found to be not good in the founding level of the liner, extra depth may be provided as per site condition.
175	Boring through all types of soils, boulders, hard starta and rocks etc.. for vertical bored piles (1000 mm dia pile) from the existing ground level 0 mCD to the founding level(-)32.0m CD of the piles, including bailing, flushing the bore bentonite with required density, chiselling, shifting of materials etc.. complete as per directed by the Engineer-In-charge.Note:-i)In case the soil stratum at the founding level is loose the Engineer orhis representative may direct the contractor to carryout additional length of boring and payment shall be made accordingly. ii)The sample of bored materials of regular interval shall be collected and produced for the verification of the Engineer or his representative at no extra cost . in case any test reqiured by engineer in-charge,bored the samples so collected shall be referred to an authorized laboratory / agency identified by the Engineer , cost for testing shall be included in the quoted rate. engineer in-charge decision regarding founding level is final.`no claims in this regards are entertained. iii)Boring through all type of soil strata means soft soil, weathered rock,cemented sand, boulders and hard rock etc.,iv)The boring in all type of soilmeasurement will be made on the basis of depth of boring from encountered soft soil level to founding/pile termination level.v)All the boring depths shall be jointly measured actually at site and Engineer in-charge decision is final.
176	Chiseling/Breaking using suitable tools and equipmentsthe top of pile concrete up to the receipt of dense concrete and dressing the pile head suitably so as to receive the form work for deck work , including breaking to the required level exposing the pile reinforcement to sufficient length as per approved drawing for embedding into the coping beam etc. including removal of concrete debris from the site, supply of all labour, material, transportation cost, hire and running charges of all machineries complete for 1000mm dia piles as directed by the Engineer-In-Charge.
177	Providing and laying reinforced cement concrete in concrete mix M40 for pile excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
178	Providing and laying reinforced cement concrete in concrete mix M40 for Precast Pile muff excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
179	Providing and laying reinforced cement concrete in concrete mix M40 forInsitu Beam excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
180	Providing and laying reinforced cement concrete in concrete mix M40 forInsitu Slab excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
181	Providing and laying reinforced cement concrete in concrete mix M40 for wearing coat as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
182	Fabricating and placing in position of steel reinforcement TMT bars(Fe 500D)confirming toIS 1786 specifications of SAIL/RINL/TISCONfor all reinforced cement concrete pileincluding lifting hook, cutting, bending, tying with 16 gauge G.I. binding wire and welding to proper specifications wherever required including cost of steel and binding wire, cover blocks of 100mm dia in CC M40 mix, supply of with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
183	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for precast pile muff including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
184	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Long Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
185	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Slabincluding cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
186	Conducting High Strain Dynamic Test as per standard practices(ASTMD 4945 of 1989) The rate is inclusive of testing, hire charges for all equipments like transducers, strain gauge, oscilloscope hammer crane and cost of development of pile concrete with line and dismantling the developed length of concrete, transportation of equipment, labour and furnishing the test result etc., complete and as directed by the EIC.
187	Provision for3\" PVC Pipe cabling forlighting fixures inside the RCC as per the site requirement.
188	KRUSHNAPRASADA GADA OVER HEAD TANK-Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Fender Column including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
189	Providing and laying reinforced cement concrete in concrete mix M40 forInsitu Beam excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
190	Providing and laying reinforced cement concrete in concrete mix M40 forInsitu Slab excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
191	Fabricating and placing in position of steel reinforcement TMT bars(Fe 500D)confirming toIS 1786 specifications of SAIL/RINL/TISCONfor all reinforced cement concrete including lifting hook, cutting, bending, tying with 16 gauge G.I. binding wire and welding to proper specifications wherever required including cost of steel and binding wire, cover blocks of 100mm dia in CC M40 mix, supply of with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
192	Supplying & fixing on wall surface Following dia Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including Supplying & fixing the pipe with clamps at 1.00 m spacing & jointing of pipes & fittings with one step CPVC solvent cement including making good the wall & Floor and testing of joints complete as per direction of Engineer-in-Charge. (32mm dia Pipe)
193	Fixing 2000 litre capacity Triple Layerwater storage tanks (WHITE) conforming to 1S:12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc. all complete as per specification and direction of the Engineer in charge.
194	Extra over for hoisting vertical water storage tanks of the following size for every additional height of 5 metres or part thereof .
195	KRUSHNAPRASADA GADA UNDER GROUND SUMP-Earthwork excavation for foundationin all soils and sub soils and to the full depth as may be directed except hard rock requiring blasting inclusive of shoring, strutting and waterwhere ever bailing out including necessary refilling the sides of foundation with excavated earth than and deposited the surplus earth as directed by department officer with all heads & lifts etc., completed as per standard specifications.
196	Filling sand and moorum admixture(30:70) by admixing sand and moorum and consolidating with HRR including watering, cost and conveyance of all materials with all the taxes, royality, labour, T & P required for the work etc. complete as directed by the Engineer-in-charge.
197	P.C.C of (1:3:6 ) with 4 cm down H.G.C.B metal includig hoisting, laying, compacting, curing and wateringetc. with all t&P required for the work including cost con veyance royality and all other taxes of materials compelte in all respect as per Engineer in charge.
198	Providing and laying reinforced cement concrete in concrete mix M35 for Slab excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
199	Providing and laying reinforced cement concrete in concrete mix M35 for Wall excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
200	Providing and laying reinforced cement concrete in concrete mix M35 for Beam excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
201	16 mm thick cement plaster in cement mortor (1:6) over brick masonary including cost and conveyance of all materials with all the taxes, royality, labour, T & P required for the work etc. complete as directed by the Engineer-in-charge.
202	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Slab including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
203	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Wall including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
204	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Tank beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
205	KRUSHNAPRASADA GADA PUMP HOUSE-Earthwork excavation for foundationin all soils and sub soils and to the full depth as may be directed except hard rock requiring blasting inclusive of shoring, strutting and waterwhere ever bailing out including necessary refilling the sides of foundation with excavated earth than and deposited the surplus earth as directed by department officer with all heads & lifts etc., completed as per standard specifications.
206	Filling in foudation and plinth with filling sand from approved quarry with all leads, lifts and delifts including cost, conveyance, royality, taxes, Labour & labour cess, well wateringetc. completeas per specification and direction of the Engineer in charge.
207	P.C.C of (1:3:6 ) with 4 cm down H.G.C.B metal includig hoisting, laying, compacting, curing and wateringetc. with all t&P required for the work including cost con veyance royality and all other taxes of materials compelte in all respect as per Engineer in charge.
208	Brick works with fly ash bricks 23 cm x 11 cm x 8 cm size having crushing strength not less than75 Kg/ cm2 with dimensional tolerance +or - 2% in cement mortar (1:6) in Super structure including cost conveyance,royality and all other taxes of materials etc. with curing complete in all respect as per specification and directon of Engineer in Charge.
209	Brick works with fly ash bricks 23 cm x 11 cm x 8 cm size having crushing strength not less than75 Kg/ cm2 with dimensional tolerance +or - 2% in cement mortar (1:6) in Super structure including cost conveyance,royality and all other taxes of materials etc. with curing complete in all respect as per specification and directon of Engineer in Charge.
210	Providing and laying reinforced cement concrete in concrete mix M35 for Slab excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
211	Providing and laying reinforced cement concrete in concrete mix M35 for Wall excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
212	16 mm thick cement plaster in cement mortor (1:6) over brick masonary including cost and conveyance of all materials with all the taxes, royality, labour, T & P required for the work etc. complete as directed by the Engineer-in-charge.
213	Providing and laying reinforced cement concrete in concrete mix M35 for Beam excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
214	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Slab including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
215	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Column including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
216	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Tank beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
217	Cement concrete (1:2:4) using 12 mm size hard granite chips of approved quarry including royality and all taxes etc complete in all respact as per direction of Engineer in charge.
218	Priming one coat with approved Water bound cementprimer including cost of primer, materials,taxes , labour, labour cess, and T&P etc. requiredto complete the work in all respect as directed by the Engineer-in-Charge.
219	Finishingsurface of walls with cement based wall putty ( Water Based ) of approved make including cost of paint, materials,taxes , labour, labour cess, and T&P etc. requiredto complete the work in all respect as directed by the Engineer-in-Charge.
220	Finishing walls with Weather coat (ISI) of approved shade in new work two coats to give an even shade including cost of paint, materials,taxes , labour, labour cess, and T&P etc. requiredto complete the work in all respect as directed by the Engineer-in-Charge.
221	Painting 2 coats to walls with Plastic emulsion paint of approved shade on new work to give an even shade including cost of paint, materials,taxes , labour, labour cess, and T&P etc. requiredto complete the work in all respect as directed by the Engineer-in-Charge.
222	Supplying,fitting & fixing solid WPCdoor with Choukath with all cost, conveyance, taxes,labour,T&P, iron fittings and cleats etccomplete in all respect including the cost of all fittings.
223	KRUSHNAPRASADA GADA TICKETING BOOTH-Earthwork excavation for foundationin all soils and sub soils and to the full depth as may be directed except hard rock requiring blasting inclusive of shoring, strutting and waterwhere ever bailing out including necessary refilling the sides of foundation with excavated earth than and deposited the surplus earth as directed by department officer with all heads & lifts etc., completed as per standard specifications.
224	Filling in foudation and plinth with filling sand from approved quarry with all leads, lifts and delifts including cost, conveyance, royality, taxes, Labour & labour cess, well wateringetc. completeas per specification and direction of the Engineer in charge.
225	P.C.C of (1:3:6 ) with 4 cm down H.G.C.B metal includig hoisting, laying, compacting, curing and wateringetc. with all t&P required for the work including cost con veyance royality and all other taxes of materials compelte in all respect as per Engineer in charge.
226	Brick works with fly ash bricks 23 cm x 11 cm x 8 cm size having crushing strength not less than75 Kg/ cm2 with dimensional tolerance +or - 2% in cement mortar (1:6) in Super structure including cost conveyance,royality and all other taxes of materials etc. with curing complete in all respect as per specification and directon of Engineer in Charge.
227	Brick works with fly ash bricks 23 cm x 11 cm x 8 cm size having crushing strength not less than75 Kg/ cm2 with dimensional tolerance +or - 2% in cement mortar (1:6) in Super structure including cost conveyance,royality and all other taxes of materials etc. with curing complete in all respect as per specification and directon of Engineer in Charge.
228	Providing and laying reinforced cement concrete in concrete mix M35 for Slab excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
229	Providing and laying reinforced cement concrete in concrete mix M35 for Wall excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
230	16 mm thick cement plaster in cement mortor (1:6) over brick masonary including cost and conveyance of all materials with all the taxes, royality, labour, T & P required for the work etc. complete as directed by the Engineer-in-charge.
231	Providing and laying reinforced cement concrete in concrete mix M35 for Beam excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
232	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Slab including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
233	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Column including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
234	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
235	Supplying,fitting &fixingVitrified tiles(600mmx600mm) in floors,treads or steps and landing on 25mm thick bed of cement mortar (1:1)(1 cement, 1 sand) jointed with neatcement slurry mixed with pigment to match the shade of the tiles including cost, conveyance, all taxes etc. complete.
236	Priming one coat with approved Water bound cementprimer including cost of primer, materials,taxes , labour, labour cess, and T&P etc. requiredto complete the work in all respect as directed by the Engineer-in-Charge.
237	Finishingsurface of walls with cement based wall putty ( Water Based ) of approved make including cost of paint, materials,taxes , labour, labour cess, and T&P etc. requiredto complete the work in all respect as directed by the Engineer-in-Charge.
238	Finishing walls with Weather coat (ISI) of approved shade in new work two coats to give an even shade including cost of paint, materials,taxes , labour, labour cess, and T&P etc. requiredto complete the work in all respect as directed by the Engineer-in-Charge.
239	Painting 2 coats to walls with Plastic emulsion paint of approved shade on new work to give an even shade including cost of paint, materials,taxes , labour, labour cess, and T&P etc. requiredto complete the work in all respect as directed by the Engineer-in-Charge.
240	Supplying, fitting & fixing of M.S. Grill for doors ,Windows & Ventilators of approved design including cost,conveyance, fabrication charges,labour,labour cess, and T&P etc. requiredto complete the work in all respect as directed by the Engineer-in-Charge
241	Priming one coat with any approved primer including cost of primer, materials,taxes , labour, labour cess, and T&P etc. requiredto complete the work in all respect as directed by the Engineer-in-Charge. (For Iron work)
242	Painting two coats with approved paints on newiron work including cost of paint, materials,taxes , labour, labour cess, and T&P etc. requiredto complete the work in all respect as directed by the Engineer-in-Charge.
243	Supplying,fitting & fixing solid WPCdoor with Choukath with all cost, conveyance, taxes,labour,T&P, iron fittings and cleats etccomplete in all respect including the cost of all fittings.
244	Supplying,fitting,fixing of window (sliding type)made up aluminium section 9778 as windows frame,section No,4095,4096 and 9777,39994 as shutter frame with 5mm thick glass as pannel fitted with rubber beading including locking arrangement including all fittings,including cost of materials all taxes,labour,T & P including cost of glass etc.complete as per direction of Engineer-in-charge
245	KRUSHNAPRASADA GADA SECURITY COMPLEX-Earthwork excavation for foundationin all soils and sub soils and to the full depth as may be directed except hard rock requiring blasting inclusive of shoring, strutting and waterwhere ever bailing out including necessary refilling the sides of foundation with excavated earth than and deposited the surplus earth as directed by department officer with all heads & lifts etc., completed as per standard specifications.
246	Filling in foudation and plinth with filling sand from approved quarry with all leads, lifts and delifts including cost, conveyance, royality, taxes, Labour & labour cess, well wateringetc. completeas per specification and direction of the Engineer in charge.
247	P.C.C of (1:3:6 ) with 4 cm down H.G.C.B metal includig hoisting, laying, compacting, curing and wateringetc. with all t&P required for the work including cost con veyance royality and all other taxes of materials compelte in all respect as per Engineer in charge.
248	Brick works with fly ash bricks 23 cm x 11 cm x 8 cm size having crushing strength not less than75 Kg/ cm2 with dimensional tolerance +or - 2% in cement mortar (1:6) in Super structure including cost conveyance,royality and all other taxes of materials etc. with curing complete in all respect as per specification and directon of Engineer in Charge.
249	Brick works with fly ash bricks 23 cm x 11 cm x 8 cm size having crushing strength not less than75 Kg/ cm2 with dimensional tolerance +or - 2% in cement mortar (1:6) in Super structure including cost conveyance,royality and all other taxes of materials etc. with curing complete in all respect as per specification and directon of Engineer in Charge.
250	Providing and laying reinforced cement concrete in concrete mix M35 for Slab excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
251	Providing and laying reinforced cement concrete in concrete mix M35 for Wall excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
252	16 mm thick cement plaster in cement mortor (1:6) over brick masonary including cost and conveyance of all materials with all the taxes, royality, labour, T & P required for the work etc. complete as directed by the Engineer-in-charge.
253	Providing and laying reinforced cement concrete in concrete mix M35 for Beam excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
254	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Slab including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
255	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Column including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
256	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
257	Supplying,fitting &fixingVitrified tiles(600mmx600mm) in floors,treads or steps and landing on 25mm thick bed of cement mortar (1:1)(1 cement, 1 sand) jointed with neatcement slurry mixed with pigment to match the shade of the tiles including cost, conveyance, all taxes etc. complete.
258	Priming one coat with approved Water bound cementprimer including cost of primer, materials,taxes , labour, labour cess, and T&P etc. requiredto complete the work in all respect as directed by the Engineer-in-Charge.
259	Finishingsurface of walls with cement based wall putty ( Water Based ) of approved make including cost of paint, materials,taxes , labour, labour cess, and T&P etc. requiredto complete the work in all respect as directed by the Engineer-in-Charge.
260	Finishing walls with Weather coat (ISI) of approved shade in new work two coats to give an even shade including cost of paint, materials,taxes , labour, labour cess, and T&P etc. requiredto complete the work in all respect as directed by the Engineer-in-Charge.
261	Painting 2 coats to walls with Plastic emulsion paint of approved shade on new work to give an even shade including cost of paint, materials,taxes , labour, labour cess, and T&P etc. requiredto complete the work in all respect as directed by the Engineer-in-Charge.
262	Supplying, fitting & fixing of M.S. Grill for doors ,Windows & Ventilators of approved design including cost,conveyance, fabrication charges,labour,T&P required.
263	Priming one coat with any approved primer including cost of primer, materials,taxes , labour, labour cess, and T&P etc. requiredto complete the work in all respect as directed by the Engineer-in-Charge. (For wood work )
264	Painting two coats with approved paints on newiron work including cost of paint, materials,taxes , labour, labour cess, and T&P etc. requiredto complete the work in all respect as directed by the Engineer-in-Charge.
265	Supplying,fitting & fixing solid WPCdoor with Choukath with all cost, conveyance, taxes,labour,T&P, iron fittings and cleats etccomplete in all respect including the cost of all fittings.
266	Supplying,fitting,fixing of window (sliding type) made up aluminium section 9778 as windows frame,section No,4095,4096 and 9777,39994 as shutter frame with 5mm thick glass as pannel fitted with rubber beading including locking arrangement including all fittings,including cost of materials all taxes,labour,T & P including cost of glass etc.complete as per direction of Engineer-in-charge
267	KRUSHNAPRASADA GADA PARKING AREA DEVELOPMENT-Earth work in slushy soil (in water upto 0.6m depth requiring the aid of pan and vassels) with in 50m. initial lift as per the direction and approved by the department.
268	Filling in foudation and plinth with filling sand from approved quarry with all leads, lifts and delifts including cost, conveyance, royality, taxes, Labour & labour cess, well wateringetc. completeas per specification and direction of the Engineer in charge.
269	Quarrying, collecting and supplying good moorum from approved quarry and stacking near work site in regular box heaps (1.50 X 1.50 X 0.50) M to be measured as 1 cum with all leads, lifts and delifts including cost, conveyance, royality taxes of all materials etc. complete and spreading the same in layers not exceeding 22.5cm and consolidation with PRR including watering etc. complete With all leads, lifts and delifts etc. complete as per specification and direction of the Engineer in charge.
270	P.C.C of (1:3:6 ) with 4 cm down H.G.C.B metal includig hoisting, laying, compacting, curing and wateringetc. with all t&P required for the work including cost con veyance royality and all other taxes of materials compelte in all respect as per Engineer in charge.
271	R.C.C. M-20 with 20 mm. down graded black hand granite crushed broken stone chips including watering and laying, compacting, curing and wateringetc. with all t&P required for the work including cost con veyance royality and all other taxes of materials compelte in all respect as per Engineer in charge.
272	Dismantling dry or grouted rough stone revetments of approns or retaining walls and stacking the stone for reuse and removing the debris within 50m lead as directed by the Engineer-in-Charge.
273	Rough stone dry packing for approach jetty in 30 cm. Depth with H.G. stone of size 15 cm. to 30 cm. including filling the interstices with require broken spalls with all leads, lifts and delifts including cost, conveyance, royalty and taxes of all materials, complete in all respect as per specification and direction of Engineer-in-Charge.(Labour only)
274	Rough stone dry packing for approach jetty in 30 cm. Depth with H.G. stone of size 15 cm. to 30 cm. including filling the interstices with require broken spalls with all leads, lifts and delifts including cost, conveyance, royalty and taxes of all materials, complete in all respect as per specification and direction of Engineer-in-Charge.
275	Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Column including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
276	Rigid and smooth centering and shuttering for R C C work including false work and dismentaling them after casting including cost of materials completev in ground floorfloor.(For Retaining wall)
277	Rigid and smooth centering and shuttering for R C C work including false work and dismentaling them after casting including cost of materials completev in ground floorfloor. (For Foundation & Plinth)
278	Provision for expansion joint in the concrete pavement complete in all respect as per specification and direction of Engineer-in-Charge.
279	KRUSHNAPRASADA GADAELECTRIFICATION-Recessed wiring to Tube light point/Fan point/exhaust fan point with 1.5 sq.mm FR PVCinsulated single core multistrand copper conductor of ISI marked with 20mm dia non-metalic PVC flexible conduit with 5A,250V Modular type switch (Make Cona/Anchor/ Havels ) & ceiling rose(Make Cona/Anchor/ Havels ) mounted on MS Box having front bakelite cover of suitable sizewith1.0 Sq.mm FR PVC insulated single core multistrand copper conductor as earth wire includingall accessories and connections as per the direction of Engineer-in-charge.(Excluding the cost of supplying and fixing of 100mmx100mmx60mm MS Box with backlight cover -1no for Modular Switch)(Make-approved ISI Marked)(GROUP-B)
280	Recessed wiring to light point (For bulb) with 1.5 sq.mm FR PVCinsulated single core multistrand copper conductor of ISI marked with 20mm dia non-metalic PVC flexible conduit with 5A,250V Modular type switch (Make Cona/Anchor/ Havels ) & Angle Holder (Make Cona/Anchor/ Havels ) mounted on MS box having front bakelite cover of suitable size, MS box with1.0 Sq.mm FR PVC insulated single core multistrand copper conductor as earth wire includingall accessories and connections as per the direction of Engineer-in-charge. (Excluding the cost of supplying and fixing of 100mmx100mmx60mm MS Box with backlight cover -1no for Modular Switch) (Make-approved ISI Marked).(GROUP-A)
281	Supplying& fixing of 5 pin 5/6 amp Modular Type Switch and 5/6 amp Modular Type socket outleton the existing switch box/ cover including connections etc. required as per the direction of Engineer-in-charge.
282	Point wiring for6pin, 15/16 ampModular Socket outletwith 2x4 sq.mm FR PVCinsulated single core multistrand copper conductor of ISI marked in recess with 20mm dia non-metalic PVC flexible conduit with 20 A,250V Modular type Motor Starter switch, Modular Base and coverfor 4 modules suitable size ISI marked Modular GI box18 SWG and earthing point with 1 x 1.5 Sq.mm FR PVC insulated single core multistrand copper conductor for loop earth wire etc. as required includingall accessories and connections as per the direction of Engineer-in-charge. (Make-approved ISI Marked)
283	Installation,Testing and Commissioning of Stepped type ceiling fan regulator, in existing switch box including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor, earthing the regulator as required.
284	Supplying and drawing 1x1.5 sq.mm FR PVCinsulated single core multistrand copper conductor of ISI markedconfirming to IS 694/1990 inexisting surface/recessed PVC conduitas required includingall accessories and connections as per the direction of Engineer-in-charge. (Make of wire Finolex/ L&T/Anchor/ Havels/ V Guard).
285	Recessedwiring to sub-main in 2x2.5 sq.mm FR PVCinsulated single core multistrand copper conductor of ISI markedconfirming to IS 694/1990 in20mm dia non-metalic heavy dutyflexible conduit 1.6mm thick alongwith 1 x 1.5 Sq.mm FR PVC insulated single core multistrand copper conductor as earth wire etc. as required includingall accessories and connections as per the direction of Engineer-in-charge. (Make of wire Finolex/ L&T/Anchor/ Havels/ V Guard).
286	Recessedwiring to sub-main in 2x4 sq.mm FR PVCinsulated single core multistrand copper conductor of ISI markedconfirming to IS 694/1990 in20mm dia non-metalic heavy dutyflexible conduit 1.6mm thick alongwith 1 x 1.5 Sq.mm FR PVC insulated single core multistrand copper conductor as earth wire etc. as required includingall accessories and connections as per the direction of Engineer-in-charge.(Make-approved ISI Marked)
287	Supplying& fixing of 12 WAY , SPN, Double Door MCB-DBwith sheet steel enclosure, distribution board, on surface/ recess complete with tinned copper bus bar, neutral box bar, earth bar, din bar, detachable gland plate , inter connection , phospate & powder painted including earthing etc. as required (but without MCB/RCCB/Isolator) includingall accessories and connections as per the direction of Engineer-in-charge.(Make-approved ISI Marked)
288	Supplying& fixing of 6amp to 32amp rating 240V \"B\" series miniature circuit breaker suitable for lighting & other loads of the Single poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as per the direction of Engineer-in-charge.(Make-approved ISI Marked)
289	Supplying& fixing of Modular GI box for 2-modules, 18 SWG(Nominal size) on surface/ recess with suitable size of Modular Base & Cover in front including cutting the wall & making good the same in case of recessed conduit as required includingall accessories and connections as per the direction of Engineer-in-charge. (Make-approved ISI Marked)
290	Supplying& fixing of Modular GI box for 4-modules, 18 SWG(Nominal size) on surface/ recess with suitable size of Modular Base & Cover in front including cutting the wall & making good the same in case of recessed conduit as required includingall accessories and connections as per the direction of Engineer-in-charge. (Make-approved ISI Marked)
291	Installation, testing and Commissioning of Ceiling fan including wiring the down rods of standard length (upto 30 cm) with 1.5sq.mm FR PVC insulated single core multistrand copper conductor etc. Required as per the direction of Engineer-in-charge.(Make-approved ISI Marked)
292	Supplying& fixing of Fan Hook Box including cutting the RC Ceiling & making good the same includingcost of all materials, labour etc. required as per the direction of Engineer-in-charge. (Make-approved ISI Marked)
293	Supply,Installation, Testing and Commissioning of 32 Amp DP Main switches of following capacity (IS 13940 Part 3/1993) on existing surface/ wall mounting and complete with HRC Fuse links, interconnections, earthing etc. as required as per direction ofEngineer-in-charge.(Make-approved ISI Marked)
294	Supply,Installation, Testing and Commissioning of single phase meter of 10-60 Amp rating with TPCODL tested on existing surface/ wall mounting and complete withinterconnections etc. as required as per direction ofEngineer-in-charge.
295	Recessedwiring from pole to meter with 6 sq.mm PVCinsulated aluminium black twin flat cable working voltage suitable upto 1100 Vof ISI markedas required includingall accessories and connections as per the direction of Engineer-in-charge. (Make-approved ISI Marked)
296	Recessedwiring for water pump with 4 sq.mm PVCinsulated aluminium black twin flat cable working voltage suitable upto 1100 Vof ISI markedas required includingall accessories and connections as per the direction of Engineer-in-charge.(Make-approved ISI Marked)
297	Supply and fixing of following sizes of PVC conduit along with accesories in recessed wiring including cutting the walland making good the same in case of recessed conduitas per the direction of Engineer-in-charge.(Make-approved ISI Marked)
298	Supplying& fixing of 6amp to 32amp rating 240V \"C\" series miniature circuit breaker suitable for Inductive load of the Double poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as per the direction of Engineer-in-charge.(Make-approved ISI Marked)
299	Supply and fixing of PVC supporting wire for 6& 4 sq.mm PVCinsulated aluminium black twin flat cable working voltage suitable upto 1100 Vof ISI markedalong with accesories etc. as per the direction of Engineer-in-charge.(Make-approved ISI Marked)
300	Earthing with GI earth pipe 3m long 40mm dia ISI marked including all accessories and providing masonary enclouser with cover plate having locking arrangement and watering pipe etc. with charcoal & salt as requiredas per the direction of Engineer-in-charge. (Make-approved ISI Marked)
301	Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthingfrom earth electrode to PANNEL BOARDdirectlyas directed by the Engineer in Charge.(Make-approved ISI Marked)
302	Supplying,fixing & fixing of 40 Watt LED solar mini mast street light .The Luminaire havee intigreted charge controller with LIFE P04 Battery (12.8v,18Ah) and 85 Wp PV module and Luminaries,8mtr cast iron pole (Design pole) single arm with panel box with instalation cost complete with connections testing and commissioning etc. as per the direction of Engineer-in-charge.
303	Supplying,fixing & fixing of 45 Watt LED solar mini mast street light .The Luminaire havee intigreted charge controller with LIFE P04 Battery (12.8v,18Ah) and 140 Wp PV module and Luminaries,8mtr Octagonal galvanzed pole(GI , hot dip ) 3way arm with panel box with instalation cost complete with connections testing and commissioning etc. as per the direction of Engineer-in-charge.(As per Quotation Rate)

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Marine Construction Tenders

Jetty Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Development Of Ro-Pax Jetty And Allied Infrastructure Connecting Balugaon In Khurda District And Krushnaprasad Gada In Puri District, Odisha Under Sagarmala, Balugaon-Odisha

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Development Of Ro-Pax Jetty And Allied Infrastructure Connecting Balugaon In Khurda District And Krushnaprasad Gada In Puri District, Odisha Under Sagarmala, Balugaon-Odisha

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us