Tender For Construction Of Computer Lab In Government Girls Inter College Maholi, Block- Maholi
Tender Value
12.49 Lakhs
Estimated cost
Bid Submission
25 Aug 2023
0 days left
EMD
25000
Bank guarantee accepted
Document Fee
813
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
maholi → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Computer Lab In Government Girls Inter College Maholi, Block- Maholi
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 min width or 10 sqm on plan ),including getting out the excavated soil and disposal of surplus earth upto 50 m including dressing of sides and ramming of bottoms, lift upto 1.5 m as directed by Engineer-in- Charge as per dar-2.8.1 |
| 2 | Providing and laying in cement concrete 1:6:12 (1 cement:6 coarse sand:12 brickballast 40 mm size) and curing complete. As per PWD.ch-273 |
| 3 | Earth filling available excavated earth (excluding rock)in tranches, plinth,sides of foundation etc. in layars nat exceeding 20cm in depth , consolidating each deposited layer by ramming and watering,lead up to 50 m and lift upto 1.5 m i/call DSR No-2.25 with 2.0 km cartage. |
| 4 | Sand filling in plinth under floor including watering and ramming and also including lift up to 1.50m and lead 50 m as per PWD-2.27 |
| 5 | Brick work wthi common burnt clay (non modular) bricks of class -150 in foundation and plinth with(1:4) cement and C/ sand mortar i/c allas per DSR No-6.1.1 |
| 6 | Brick work wthi common burnt clay (non modular) bricks of class -150 in foundation and plinth with(1:6) cement and C/ sand mortar i/c allas per DSR No-6.1.2 |
| 7 | Providing and laying in position specified grade of reinforced cement concrete,excludingthecostofcentering,shuttering,finishingand reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone As per PWD-5.1.2 |
| 8 | Providing and layingcement concrete in retaining walls,return walls, walls (anythickness) i.c. attached pilaters, columns, piers, abutments, pillars, posts, struts, bullresses, string or lacing courses, parapets, coping, floor etc.of specified grade excluding the cost of centering and shuttering - All work up to five level : 1:1.5:3 (1 Cement : 1.5 coarse sand (zone-III) : 3graded stone aggregate 20 mm nominal size). As per PWD-4.2.2 |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. as per D.A.R. NO-5.22.6+Ch.no-1 item no-13 a |
| 10 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4graded stone aggregate 20 mm nominal size). As per PWD-4.1.3 |
| 11 | Brick work wthi common burnt clay (non modular) bricks of class -150 in superstructure above plinth level up to floor V level in all shapes and sizes in.(1:6) cement and C/ sand mortar i/c allas per DSR No-6.4.2 |
| 12 | Providing and fixing angle iron frames for doors , windows and ventilators of mild steel angle section of size 35x35x5mm joint mitred and welded by angle iron 35x35x5mm or 35x5 mm flat pieces to the existing Angle Iron chaukhat (40x40x5 mm) . As per PWD-10.31 |
| 13 | S/F of flush doors commercial quality conforming to I.S. 2202 Part 1 (1983) including fixing of woodencleats and stoppers and including fixing and adjustment of hings bolts locks handles springs fitting with necessary screws complete. As per PWD-9.21.1 -35 mm thick |
| 14 | Providing & fixing oxidized M.S. sliding door bolts ISI marked with nuts and screws etc complete (250mm x 16mm). As per PWD-9.62.2 |
| 15 | Providing & fixing oxidized M.S. tower bolts ISI marked with nuts and screws etc complete (250mm x 10mm). As per PWD-9.63.1 |
| 16 | Providing & fixing oxidized M.S. Door Handle ISI marked with nuts and screws etc complete (125mm). As per PWD-9.66.1 |
| 17 | Supply an fixing glass panes of 4mmthick glass equuivelent ISI mark quality putty brades and springs andi/c all comp. As per PWD-10.30.1 |
| 18 | 15 mm thick cement, sand plaster in 1:6 cement & C/sand mortar as per PWD-13.5.2 |
| 19 | 12 mm thick cement, sand plaster in 1:6 cement & C/sand mortar as per PWD-13.4.2 |
| 20 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm. As per PWD-11.41.2 |
| 21 | 15mm thick cement plaster on rough side of single or half brick wall with cement mortar in 1:3 cement & F/sand mortarfinished with a floating coat neat cementas per PWD-13.8.1+13.21 |
| 22 | Providing and Applying white cement based putty average thickness of 1 mm of approved brand over the plasterd wall surface.as per Chap-13 S.I. no-23 |
| 23 | Painting two coats on steel or other metal surface over one coat of priming coat incl. material,labour and T&P etc. required for proper completion of work, as per PWD-641+642 |
| 24 | 25 mm C.C. flooring in 1:2:4 cement, C/sand and 12.50 mm gauge stone grit, laid over base concrete and finished with floating coat of neat cement(base concrete to be paid seprately) incl. fixing of glass strips( excluding cost of glass strips) As per PWD-601 (2020) |
| 25 | Supply and fixingglass strips 22 mm wide 2.8 to 3.7 mmthick as per sor ch.no-1 item no-2a |
| 26 | Engraving Lines in the plaster of outer face wall vertically and horizontally to display the surface as stone facing as directed by the E/I including all labour and T&P etc. required for proper completion of the work.As per PWD-598 (2020) |
| 27 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). As per PWD-13.47.1 |
| 28 | Finishing walls with oil bond distemper of approved make three coat quality of required shade etc comp. As per PWD-649+650. |
| 29 | Centering & shuttering including strutting, propping etc. and removal of form for |
| 30 | Centering & shuttering including strutting, propping etc. and removal of form for |
| 31 | Centering & shuttering including strutting, propping etc. and removal of form for |
| 32 | S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16 SWGM.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for proper completion of work.as per elc.sor no-1149 |
| 33 | P/F of 100 mm dia wall face unplasticised rigid PVC rain water down pipe complete with rose heads bends as DSR NO-12.41.2 |
| 34 | Wiring point for light with 1sq mm PVC insulated single core copper conductor cable in PVC condute with 1.5 sq mm FR PVC Complet in all respect SI No. 131 (C) |
| 35 | Wiring point for fan/fresh air fan (lisht duty exhaust fan)with 1sq mm PVC insulated single core copper conductor cable in PVC condute with 1.5 sq mm FR PVC Complet in all respect SI No. 133 (C) |
| 36 | Wiring point for plug with 1sq mm PVC insulated single core copper conductor cable in PVC condute with 1.5 sq mm FR PVC Complet in all respect SI No. 134 (C) |
| 37 | S/F of switch box made up of 16 SWG (1.5 mm) thick M.S. Sheet of200x250x65mm size duly painted with red oxide primer require for proper completion of work. SI. No. 162 |
| 38 | S/F of surface / flush mounting 8 ways S.P.N. Distribution board without MCB complete in all respect SI No. 1024 cat-b |
| 39 | S/F of power plug 20 A/ 250 V flush type switch and 5 pin 20 A/ 250V flush type universal socket in sutaible M.S. Box of 175x100x65 mm complete in all respect SI No. 1139 A |
| 40 | S/W submain with two number 2.5 sqmm FR PVC insulated 1100V grade multistrand single core copper conductor cable complete in all respect SI No. 1304 (C) |
| 41 | S/W of LED tube light with batten suitable for up 1x22 watt LED tube light complete in all respect SI No. 1413 AAA |
| 42 | S/F of Fan |
| 43 | Add 18% GST |
AI Tender Summary
Tender Timeline
Aug 17, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 26, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender