Educational and Research Institute Boards / Undertakings / PSU Closing in 0 days TDR #39199369

Tender For Installation Of Based Solar Lift Irrigation

Issued by Boards / Undertakings / PSU · Patna, Bihar
Tender Value
Ref. Documents
Estimated cost
Bid Submission
30 Aug 2023
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Offline

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Patna → Bihar
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Installation Of Based Solar Lift Irrigation Solar PV module PV module mounting structure 335 Wp poly crystalline solar panel Make: Circular /Panasonic / Afternoon /Luminous/Vikram Should be angle section fixed and tilt type made up of Galvanized Iron (GI) channel. Having Silver Color Vertical legs are 75x40x4 mm channel section, all rafter are 50x50x5mm angle, and purlins should be 40x40x5mm angle, all cross support are 40x40x5mm angle section fully prefabricated and assemble with Gl fasteners and should be hot dipped galvanized, minimum height of the panel from GL should be 1.5meter, no. of vertical leg supported the PV module should be 8. 3.00 HP(DC), submersible pump set with complete stainless-steel body 50 HZ frequency having minimum discharge 3.50 LPS for 65 Meter Head make- Kirloskar. Submersible pump set Controller panel with cabinet IP54CPRI tested double door enclosure make- Kirloskar variable frequency drive, Isolator switch protected from over current and under current, short circuit, GI coated cabinet IP65 protection, 1000 volts reserve protection diode, panel should be installed outside PV module. Warranty- 5 Years Antitheft SS304 nuts and bolts and aluminum Z clamp with high deeped galvanized. Nuts and bolts for PV panel, rafter and purlins Cable and connections conduits Copper, 2.5 Sq.mm, 3 Core, Length- 60 M, ISI Mark, Make-Anchor-Panasonic Polycab, Inter Connecting Cable Type- DC, Size- 4 sq. mm, Copper, Make: Anchor- Panasonic, polycab Column pipe 50 mm dia HDPE column pipe (Separate 10 ft. length each) make-Prince Fencing and 50x50 mm cross linked 3mm dia Gl wire mesh, other accessories 40x40x5mm Gl fencing post, entry gate 2x1m Lighting arrestor LA type- Spice type LA, earthing type-Copper plate, thickness- 3 mm, size 2 x 2, HDG Pole Mounted 5 M Heights, Make- power track, Qty- 1 Set Danger Board GI sheet made, minimum thickness-1.1 mm, Size- 1.5x1.5 ft. Enclosure-Transparent, 280*190*130, IP 65, SPD- Type-2,1000V, DC MCB-16A, 2P, 1000V, Fuse DCDB Holder & Fuse- 16A, Qty- 1 Set, Make- Anchor-Panasonic (CITEL, polycab Siemens, Hager) Earthing for Controller and DCDB System Testing Earthing type-Copper plate, thickness- 3 mm, size 2 x 2, Make- Power track, Qty- 2 Set System Testing, Installation, Integration, commissioning of system Warranty and AMC for PV module and pump set PV module should be 10 years product warranty and 25 years power output warranty for pump set and controller warranty should be 2 years.

AI Tender Summary

OUR REF NO 39199369
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE Ref. Documents
LAST DATE 30-08-2023
Authority
Authority Name baif institute for sustainable livelihoods and development
Work Description Tender For Installation Of Based Solar Lift Irrigation Solar PV module PV module mounting structure 335 Wp poly crystalline solar panel Make: Circular /Panasonic / Afternoon /Luminous/Vikram Should be angle section fixed and tilt type made up of Galvanized Iron (GI) channel. Having Silver Color Vertical legs are 75x40x4 mm channel section, all rafter are 50x50x5mm angle, and purlins should be 40x40x5mm angle, all cross support are 40x40x5mm angle section fully prefabricated and assemble with Gl fasteners and should be hot dipped galvanized, minimum height of the panel from GL should be 1.5meter, no. of vertical leg supported the PV module should be 8. 3.00 HP(DC), submersible pump set with complete stainless-steel body 50 HZ frequency having minimum discharge 3.50 LPS for 65 Meter Head make- Kirloskar. Submersible pump set Controller panel with cabinet IP54CPRI tested double door enclosure make- Kirloskar variable frequency drive, Isolator switch protected from over current and under current, short circuit, GI coated cabinet IP65 protection, 1000 volts reserve protection diode, panel should be installed outside PV module. Warranty- 5 Years Antitheft SS304 nuts and bolts and aluminum Z clamp with high deeped galvanized. Nuts and bolts for PV panel, rafter and purlins Cable and connections conduits Copper, 2.5 Sq.mm, 3 Core, Length- 60 M, ISI Mark, Make-Anchor-Panasonic Polycab, Inter Connecting Cable Type- DC, Size- 4 sq. mm, Copper, Make: Anchor- Panasonic, polycab Column pipe 50 mm dia HDPE column pipe (Separate 10 ft. length each) make-Prince Fencing and 50x50 mm cross linked 3mm dia Gl wire mesh, other accessories 40x40x5mm Gl fencing post, entry gate 2x1m Lighting arrestor LA type- Spice type LA, earthing type-Copper plate, thickness- 3 mm, size 2 x 2, HDG Pole Mounted 5 M Heights, Make- power track, Qty- 1 Set Danger Board GI sheet made, minimum thickness-1.1 mm, Size- 1.5x1.5 ft. Enclosure-Transparent, 280*190*130, IP 65, SPD- Type-2,1000V, DC MCB-16A, 2P, 1000V, Fuse DCDB Holder & Fuse- 16A, Qty- 1 Set, Make- Anchor-Panasonic (CITEL, polycab Siemens, Hager) Earthing for Controller and DCDB System Testing Earthing type-Copper plate, thickness- 3 mm, size 2 x 2, Make- Power track, Qty- 2 Set System Testing, Installation, Integration, commissioning of system Warranty and AMC for PV module and pump set PV module should be 10 years product warranty and 25 years power output warranty for pump set and controller warranty should be 2 years.
Basic Detail
Tender No BISLD-BR/HRDP-HDFC/PATNA/392
Bidding Type Tender
Location
City Patna
State Bihar
Key Dates
Publish Date 17 Aug 2023
Submission Date 30 Aug 2023
Open Date 01 Jan 0001
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD Ref. Documents
Exemption Not Available
Document List
f075220f-9a26-47af-8c32-acf594ba55b7.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 17, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 30, 2023
17:00 IST

Bid Submission Deadline

Offline submission at the designated office.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

f075220f-9a26-47af-8c32-acf594ba55b7.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders