Uttarakhand Jal Vidyut Nigam Limited-UJVN has published Tender For Construction Of Water Intake Chamber And Laying Of Drinking Water Supply Line For Koti, Dehradun. Submission Date for this Tender is 14-09-2023. Water Pipe Line Tenders in Dehradun Uttarakhand. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 06-Sep-2023 | Date Extension Notice- 01 | Date | 14-09-2023 |
| Sl. No. | Item Description |
| 1 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. |
| 2 | 80 MM |
| 3 | 65 MM |
| 4 | 50 MM |
| 5 | 40 MM |
| 6 | 32 MM |
| 7 | 20 MM |
| 8 | 15 mm |
| 9 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer in charge. 1:3:6 or richer mix |
| 10 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 11 | Demolishing brick work, manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 12 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m Excavation in all kinds of soil. |
| 13 | Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 14 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 15 | Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with cement mortar 1:6 (1 cement : 6 coarse sand) |
| 16 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 17 | Providing and Laying in position cement concrete of specified grade excluding the cost of centering and shuttering -all work up to plinth level1:3:6(1 Cement :3 coarse sand :6 gradede stone aggregate 20 mm Niminal size) |
| 18 | Providing and laying in position specified grade of reinforced cement concrete 1:1.5:3 (1 cement:1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 19 | Centring and shuttering including strutting, ropping etc. for |
| 20 | Foundation, Footing, Bases ofcolumns, etc for mass concrete. |
| 21 | wall any thickness. |
| 22 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Mild steel and Medium Tensile steel bars. |
| 23 | 12 CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT of mix 1:3 (1 cement : 3fine sand) |
| 24 | White washing with lime to give an even shade : Old work (two or more coats)including supply of all material, labour, T&P etc. required for proper completion of the work. |
| 25 | Distempering with 1st quality oil bound washable distemper (readymade) of approved manufacturer and of required shade and colour complete, as per manufacturer’s specification Two or more coats on new work. |
| 26 | Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). |
| 27 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @ 1.43 ltr/10 sqm) over existing cement paint surface. |
| 28 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work including supply of all material, labour, T&P etc. required for proper completion of the work. |
| 29 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old workincluding supply of all material, labour, T&P etc. required for proper completion of the work. |
| 30 | Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 31 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer Using M.S. angels 40x40x6 mm for diagonal braces. |
| 32 | Attending minor type repair for full day by engaging and supplyingone suitable helper mali/beldar/mazdoor/sweeper /beldar for caring of simple type of repairing of all work including all t&P etc complete for proper completion of work as per direction of Engineer-in-Charge. |
| 33 | Attending minor type repair for full day by engaging and supplyingone suitable mistry/mason for caring simple type of repairing of all work including all T&P etc complete required for proper completion of the work as per direction of Engineer -In-charge but Excluding cost of material. |
| 34 | Providing and fixing brass bib cock/ stop cock 20 mm nominal bore of approved quality. |
| 35 | Supply of ISI marked G.M Gate Valve class-I with Hand wheel conforming to IS:778/1984 (reaffirmed 2000) for water works purpose of following sizes. |
| 36 | 20 mm |
| 37 | 32 mm |
| 38 | 40 mm |
| 39 | 50 mm |
| 40 | 65 mm |
| 41 | 80 mm |
| 42 | Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) |
| 43 | 90° 50 MM |
| 44 | 90°65 MM |
| 45 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1mm thick with zinc coating not less than 275gm/ m. |
| 46 | Hire charges of Welding Machine single phase, with welder, helper, and electrodes etc. for repair and welding of gates, doors, windows etc. for 8 hours in a day complete with all material, labour,T&P etc. required for proper completion of work. |
| 47 | Providing and laying of wire crates 3.00x1.50x1.50 in size with GI wire conforming to IS: 280 & IS:4826 in 150mm x 150mm mesh laid with stone boulders. as per direction of Engineer-in- charge. GI wire 8 gauge BWG- |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
