}

Tender For Furnishing Work At Kushaha Branch, New Premises, jaunpur-Uttar Pradesh

Union Bank Of India-UBI has published Tender For Furnishing Work At Kushaha Branch, New Premises. Submission Date for this Tender is 05-09-2023. Civil Work Tenders in jaunpur Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

39174553
Tender For Furnishing Work At Kushaha Branch, New Premises
Limitted
Indian
Uttar Pradesh
jaunpur
05-09-2023

Tender Details

Tender For Furnishing Work At Kushaha Branch, New Premises => Limited A. Furnishing Works 1 Main Entrance Door For Branch 90 Sqft Providing And Fiing In Position Toughened Glass Door With 12 Mm Thick Toughned Glass With 3M Security Film Complete In All Respects With Ozone Patch Fittings Including Top Patch ( Opf-02 ) , Bottom Patch ( Opf-03 ) Angle Lock ( Opl-01 ) Top Pivot ( Ofs-Acc-Gdp ) Floor Spring ( Fs8400 ) And Handle ( Ogh55 ) 32Mm X 457 Mm All Item Included ) 2 Full Height Glazed & Unglazed Partition ( Ht - 8-6 ) 355.00 Sq.Ft Glazed Partition ( Upto False Ceiling Height Only Considered And Above Necessary Ceiling Supports To Be Provided ) With Anodized Aluminium Frame Work, Heavy Sections ( 2Mm Thickness ) Of 2X1.5 Section, Spacing Of 20X20 On Bothsides And Covered With 9Mm Thick Bwr Plywood Finished With 1Mm Thick Laminate Of Skriting & Borders On Both Sides.Above 10 / 26 / 30 Height Partition, Fixed With 8.0 Mm Bevelled Glass With 3M Sticker Works Door And Teak Wood Beading With Duco Paint. Clear Glass Shall Be Finished With Frosted Film Sticking Over The Glass Of Approved Pattern And Design. Rate To Include Providing Cutouts And Provisions To Run Electrical Conduits, Switches, Etc..Cost Include Wastages, Transports, Loading, Unloading Charges, Labours, Materials, Tools, Lead, Lift And Etc.Complete As Per Drawings And Instructions Of The Architect. The Job Shall Also Include For Provision Of Laying Conduits, Switch Boxes Etc. The Erection Of Partition Shall Include For Expansion Bolts Cleats, Clamps Bolts, Nuts, Screws, Rivets And Other Accessories, All Complete Up To The Satisfaction Of The Architect. All Door Opening Shall Have Rebated Teak Wood Framework ( Size - 75Mm X 50Mm, As Per Profile ) On Vertical ( 2 Nos. ) And Horizontal ( 1 No. ) Sides, With Melamine Finish And Rebate Of 40Mm X 12Mm, All Complete Up To The Satisfaction Of The Architect. 26 The Partition And Doors Shall Have Hinges Floor Springs / Sliding Arrangement / Hydraulic Door Closer, Mortise Locks ( Godrej Make All ) , Etc. The Rate Shall Include Cost Of All Materials, Labour, T&P, Wastages, Etc. Required For Proper Completion Of Work, All Complete To The Satisfaction Of The Architect. 3 Low Height Wooden Partitions ( Partly Glazed ) And Flap Doors Same Specification As In 1 But P / F Half Height Partition Of Height 4 -6 With Wooden Laminate Till 3 -0 And 1 -6 Height 12 Mm Thick Glass Secured With D Brackets Including All Hardware Necessary With The Same Specs.As Above. 155.00 Sq.Ft 3B Ups Parttion Up To Ceiling Ht With Bison Board 115.00 Sq.Ft 4 Cash Cabin Partition ( Ht-7-6Only ) Decorative Grill ( 12Mm Thk ) -Hexagonal Opening As Per Instruction Of Banks Engineer / Architect. ) Aii Exposed Edges Of Plywood Shall Be Fixed With 1 / 8 C.P.Teak Lipping. Providing And Fixing Of Cash Enclosures At Height Of 7 -4 With Anodized Aluminium Frame Work, Heavy Sections ( 2Mm Thickness ) Of 2X1.5, Spacing Of 20X20 On Bothsides And Covered 6Mm Thick Bwr Plywood Finished With 1Mm Thick Laminate Of ( As Per Bank Colours ) For Skriting & Borders.Partition Shall Have Provision For Opening And 19Mm Bwr Plywood Tray For Challan Receiving Purpose. Cost Include Aluminium Grill And Fixed With Teak Wood Beading And Duco Paint. Cost Also Include 3 Nos Of Solid Core Flush Doors With Sizes Of 26X70, Fixed In The Partition. Door Shall Have Teak Wood Beading And Lipping With Duco Paint. Door Finished With 1Mm Thick Laminate Of ( As Per Bank Colours ) For Base And ( As Per Bank Colours ) For Skirting Of Approved Pattern. Door Shall Have 8Mm Glass Fixed With Teak Wood Beading And Duco Paint. Rate To Include Hardwares Like Brass Hinges, Godrej Three Nos Of Night Latch, Door Closure, Door Stopper And Handles. Cost Also Include Cash Transaction Opening Shall Be Provided With Door Arrangements Made With Bwr Plywood Frame Work Finished By Laminate, Duco Paint And Locking System. Cost Include Wastages, Transports, Loading, Unloading Charges, Labours, Materials, Tools, Lead, Lift And Etc.Complete As Per Drawings And Instructions Of The Architect. Solid Till 4’ -0’’ Then Aluminium Decorative Grill Height Till 7’ -0”Then Again Solid 115.00 Sq.Ft 5 Glass Barrier On Cash Cabin And Front Glass For Counter ( 12 Mm Necessary ) 80.00 Sq.Ft Providing And Fixing Glass Barrier ( As Per Profile And Design ) In Front Of Cash And Ledger Counter Made Out Of 12Mm Thick Polished Edged Float Glass ( Make – Modi Guard Or Equivalent ) . It Shall Have 25Mm X 20Mm Teakwood Beading ( As / Shape Approved By The Architect ) To Hold The Glass From Sides And Top ( Optional ) . All Teak Wood Surfaces Shall Be Melamine Polished. The Rates Shall Include For Cutting ( In Geometrical Shape ) And Polishing The Edges, All Complete To The Satisfaction Of The Architect. 6 Computerised Ledger & Cash Counter . Providing And Placing In Position Ledger Counter With Top, Vertical Sides / Dividers, Skirting And Fascia Made Out Of 19Mm Thick Water Proof Board With 1Mm Thick Laminate 27 ( As / Shade Approved By The Architect ) On All Exposed Surfaces. It Shall Also Have 75Mm X 40Mm Teak Wood Runners Below The Top And For Footrest Below. Every Unit Shall Be Provided With A Side Unit ( Size - W-500Mm, H750mm, D-500Mm Approx. ) , Consisting Of 150 Mm Deep Drawer At Top And A Cabinet With Open Able / Hinged Shutter Below. . The Fascia Of Drawer And Shutter Of Cabinet Below Shall Be Made Out 19Mm Thick Water Proof Board With 1Mm Thick Laminate ( As / Shade Approved By The Architect ) And Sides And Bottom / Internal Surface Of Drawer Shall Be Made Out Of 12Mm Thick Water Proof Ply. The Side Unit Shall Have Cam Locks, Handles, Guides, Sliding Units, Hinges, Magnetic Catcher’S Etc. Of Approved Make. Every Unit Shall Be Provided With A Keyboard Drawer Unit ( Size - W-550Mm, H100mm, D-300Mm Approx. ) Below. The Counter Shall Have 100Mm Deep Fascia, Below The Top, In Which Keyboard Drawer Unit Shall Be Adjusted. It Shall Be Made Out 19Mm Thick Water Proof Board With 1Mm Thick Laminate ( As / Shade Approved By The Architect ) And Sides And Bottom Of Drawer Shall Be Made Out Of 12Mm Thick Water Proof Ply. The Unit Shall Have Cam Locks, Handles, Guides, Sliding Units Etc. Of Approved Make. The Job Shall Include For 6Mm X 6Mm Grooves In Between Sides And Open Able Drawers And Hinged Shutters. All The Exposed Edges Of Water Proof Board And Ply Shall Be Provided With 6Mm Thick Teak Wood / Hard Wood Lipping. All Teak Wood Surfaces Shall Be 1Mm Thick Laminate , All Complete To The Satisfaction Of The Architect. A High Level 5.50 Rg.Ft High Level ( Two Levels ) Computerised Cash Counter. Lower Level Top Shall Be 900Mm Wide And At 750Mm Level From Floor & Upper Level Top Shall Be 250Mm Wide ( And At 1150 Mm Level From Floor B Low Level 36.00 Rg.Ft Low Level ( Two Levels ) Computerised Ledger Counter. Lower Level Top Shall Be 900Mm Wide And At 750Mm Level From Floor & Upper Level Top Shall Be 150Mm Wide And At 900Mm Level From Floor 7 Tables A Managers Table With Side Credenza Include The 12 Mm Thick Glass 1.00 No. Providing And Placing In Position Tables With Top, Vertical Sides / Dividers, Skirting And Modesty Panel Made Out Of 19Mm Thick Water Proof Board With 1Mm Thick Laminate ( As / Shade Approved By The Architect ) On All Exposed Surfaces. It Shall Also Have 75Mm X 40Mm Teak Wood Runners Below The Top And For Footrest Below.Every Table Shall Be Provided With A Side Unit ( Size - W-500Mm, H750mm, D-500Mm Approx. ) , Consisting Of 150 Mm Deep Drawer At Top And A Cabinet With Open Able / Hinged Shutter Below. The Facia Of Drawer And Shutter Of Cabinet Below Shall Be Made Out 19Mm Thick Water Proof Board With 1Mm Thick Laminate ( As / Shade Approved By The Architect ) And Sides And Bottom / Internal Of Drawer Shall Be Made Out Of 12Mm Thick Water Proof Ply. The Side Unit Shall Have Cam Locks, Handles, Guides, Sliding Units, Hinges, Magnetic Catcher’S 28 Etc. Of Approved Make. Every Table Shall Be Provided With A Keyboard Drawer Unit ( Size - W -550Mm, H -100Mm, D - 300Mm Approx. ) Below. The Table Shall Have 100Mm Deep Facia, Below The Top, In Which Keyboard Drawer Unit Shall Be Adjusted. It Shall Be Made Out 19Mm Thick Water Proof Board With 1Mm Thick Laminate ( As / Shade Approved By The Architect ) And Sides And Bottom / Internal Surface Of Drawer Shall Be Made Out Of 12Mm Thick Water Proof Ply. The Unit Shall Have Cam Locks, Handles, Guides, Sliding Units Etc. Of Approved Make. The Job Shall Include For 6Mm X 6Mm Grooves In Between Sides And Open Able Drawers And Hinged Shutters. All The Exposed Edges Of Water Proof Board And Ply Shall Be Provided With 6Mm Thick Teak Wood / Hard Wood Lipping. All Teak Wood Surfaces Shall Be Melamine Polished And Other Internal Surfaces Shall Be Painted With Two Coats Of Synthetic Enamel Over One Coat Of Primer, All Complete To The Satisfaction Of The Architect. Every Table Top Shall Be Provided With 10 Mm Thick Float Glass ( As Per Profile ) With Polished And Beveled ( 25Mm Wide ) Edges All Complete To The Satisfaction Of The Architect. B Officer Table Size 4 -6X 2 -6X 2 -6 Withside Table Include The 12 Mm Thick Glass 0.00 No. Specification As Per Manager Table ( Part - A ) 8 Writing Table & Brochure Holder 1.00 No. Providing And Fixing In Position ( With Rear Wall ) Slip And Customer Writing Desk ( As Per Design ) Of Over All Size - 1200Mm X 450Mm X 300Mm. The Fixing Shall Include For Expansion Bolts, Cleats, Clamps, Bolts, Nuts, Screws, Rivets And Other Anodized Accessories, All Complete Up To The Satisfaction Of The Architect. .The Writing Top And Facia / Sides Shall Be Made Out Of 19Mm Thick Water Proof Board With 1Mm Thick Laminate ( As Per Shade Approved By The Architect ) , On All Sides And . It Shall Be Laid Over The Base Of 19Mm Thick Water Proof Board ( Already Considered In Various Items. ) And Fixed With Araldite. It Shall Include For Beveling And Polishing At All The Exposed Edges. The Rate Shall Include Cost Of All Materials, Labour, Scaffolding, Wastages, Polishing And T& P Etc. It Shall Be Made Out Of 12Mm Thick Water Proof Plywood ( Two Surfaces Of 6Mm Thickness, Fixed Together, Where Required ) On Rear And Both Sides. The Front Shall Be Made Out Of 12Mm Thick Glass ( As Per Profile ) . It Shall Be Fixed In The Grooves, Made In Side Members, In An Inclined Manner ( As Per Profile In Drawing Enclosed ) With A Gap Of 75Mm ( Max. ) In Between. The Space Shall Be Further Divided In Four Equal Parts With Help Of 12Mm Thick Water Proof Plywood. All Edges Of The Glass Shall Be Polished.All The Exposed Edges Of Water Proof Board And Plywood Shall Be Provided With 6Mm Thick Teak Wood / Hard Wood Lipping. All Teak Wood Surfaces Shall Be Melamine Polished And Other Internal Surfaces Shall Be Painted With Two Coats Of Synthetic Enamel Over One Coat Of Primer, All Complete To The Satisfaction Of The Architect 9 Complaint & Suggestion Box & Cheque Drop Box 2.00 No. Providing And Fixing In Position Complaints / Suggestion Box ( As Per Design ) With Hinged Shutter Of Size - 450Mm X 600Mm X 150Mm Made Out Of 19Mm Thick Water Proof Board With 1Mm Thick Laminate ( As Per Shade Approved By 29 The Architect ) On All Exposed Surfaces. It Shall Have 6Mm Thick Water Proof Plywood On The Back. .The Hinged Shutter Shall Be Made Out Of Teakwood ( Section - 25Mm X 50Mm ) Framework, With 4Mm Thick Float Glass, Fixed With Teakwood ( Size - 12Mm X 12Mm ) Beading. The Unit Shall Have Cam Locks, Handles, Spring Hinges, Magnetic Catchers Etc. Of Approved Make. All The Exposed Edges Of Water Proof Board Or Ply Shall Be Provided With 6Mm Thick Teak Wood / Hard Wood Lipping. All Teak Wood Surfaces Shall Be Melamine Polished And Other Internal Surfaces Shall Be Painted With Two Coats Of Synthetic Enamel Over One Coat Of Primer, All Complete To The Satisfaction Of The Architect. 10 Notice Board 1.00 No. Providing And Fixing In Position Notice Board ( As Per Design ) Of Size - 900Mm X 600Mm X 150Mm. The Sides Shall Be Made Out Of 19Mm Thick Water Proof Board With 1Mm Thick Laminate ( As Per Shade Approved By The Architect ) On All Exposed Surfaces.It Shall Have 12Mm Thick Tack The Front Shall Have 6Mm Thick Float Glass Sliding Shutter In Two Parts. It Shall Also Have 19Mm Wide Two Track Aluminium Channel For Sliding Arrangement, All Around, Along With Locking Arrangement.Board ( Make – Cellotex Or Equivalent ) Wrapped With Stretched Blazer Cloth ( Make- Raymonds ) , Of Rs. 200.00 Per Mt. ( Approx. ) In Colour And Pattern Approved By The Architect. It Shall Be Fixed With Help Of Kail / Partal Wood ( Sect. 19Mm X 25Mm ) Frame Work. It Shall Be Covered With 6Mm Thick Water Proof Plywood, On The Back. All The Exposed Edges Of Water Proof Board And Ply Shall Be Provided With 6Mm Thick Teak Wood / Hard Wood Lipping. All Teak Wood Surfaces Shall Be Melamine Polished And Other Internal Surfaces Shall Be Painted With Two Coats Of Synthetic Enamel Over One Coat Of Primer, All Complete To The Satisfaction Of The Architect. 11 False Ceiling ( Armstrong ) 840.00 Sq.Ft. Providing And Fixing In Position False Ceiling In Armstrong 600 X 600 X 15 / 16 Mm Dune Supreme Rh 99 Prima Tile With Regular Edge Frame Work As Specified By Armstrngcompany With Suspenders Making Necessary Frame Work For A.C. Ducting For Diffusers And Light Fitting. 12 False Ceiling Works ( Gypsum ) With Cove Design & Cnc Cutting Jali & Mdf Jali Providing & Fixing With Necessary Scaffolding Frame In 22 Gauge Gi Channel / Angle, Placed At Appropriate Grid, Fixed To Rcc Slab, Beam, Wall Etc. With Fasteners / Screws Finished With 12.0Mm Gypsum Sheets Joints Covered With Pop Slurry / Tape. Rates Shall Include Painting ( One Coat Of Putty, One Coat Of Primer Coat And Two Coats Of Acryilc Paint ) . Rates Shall Include Providing Necessary Cut-Outs & Additional Support Frames For Electrical Fixtures, A.C. Grills, Vertical Drop Upto 16 Etc 525.00 Sqft 13 Column & Wall Panelling ( As Per Direction By Architect ) 495.00 Sqft Providing & Fixing In Position 2X2 Kailwood Frame And Finished With 6 Mm Thk. Commercial Ply On Both Sides With1.0 Mm Thk. Laminate On Top As Per Instruction Of The Architect 30 14 Designer Mdf Board Column Cladding With Cnc Cutting And Backing Of Acryllic / Metalim, Jaali To Be Painted In White Duco Mpaint And Led Strip Lighting To Be Included In This Rate.The Support System To Be As Above. 145 Sq.Ft. 15 Acrylic Emulsion With Pop Base. 4852.00 Sq.Ft. Painting On Undecorated / Decorated Wall And Ceiling Surfaces With Two Or More Coats Of Acrylic Emulsion ( Asian / Berger Make ) ( As / Shade Approved By The Architect ) Of Approved Brand. It Shall Include For Preparing The Surfaces Clean, Even And Smooth With Thoroughly Brushing With Broom, Scratching With Patti And Sand Papering Respectively, So That The Surfaces Are Free From Oil, Grease, Dirt, Mortar Droppings & Other Foreign And Loose Matter. It Shall Also Include For Preparing The Surface And Filling Of Holes With Plaster Of Paris Before Priming Coat Of Whiting / Approved Primer. This Work Is Included Front Elevation Painting ( Including First Floor Elevation Painting ) Complete In All Respects . The Rate Shall Include Cost Of All Materials Such As Plaster Of Paris, Whiting / Primer, Glue ( Fevicol ) , Indigo / Stainer, Brushes, Sand Paper, Patti, Dhoti, Broom Stick, Clean Water With Storage And Other Containers, Labour, Scaffolding / Ladder Charges, Cleaning Of Floors And Other Sundries Etc., All Complete To The Satisfaction Of The Architect. 16 Low / Full Height Storage Racks S1-Storage ( Low Height ) Size- 6 Length X 2-6 Highx 1-4Deep Ply Wood-19.0Mm Thick For Side Top And Door & Back 6.0Mm With Shutters, Shelf 19.0Mm Shelf-19.0Mm Thick Ply Handle-Brush Finish Stainless Steel Lock-Vijayan / Godrej All Internal & Rear Surfaces To Be Painted With Two Coats Of Enamel Paint Over A Coat Of Primer / Putty As Directed To Get A Smooth Finish.All Instructed By Banks Engineer / Architect. 260.00 Sqft 17 Acp Panneling ( As Per Bank Colour ) 105.00 Sqft Rolling Shutter Box. Frame Work-2 X 2 X 1.5 Mm Thick Aluminium Tubular Section ( Horizontal / Vertical ) Jindal / Alstrong Make Aluminium Composite Panel-3.0Mm Thick Of Approved Colour With Bonding Material 18 Main Panel Boxing Sqft 60 Providing & Fixing In Position 2X2 Kailwood Frame And Finished With 6 Mm Thk. Ply On Outer Sides With1.0 Mm Thk & Inner Side Of Storage Paste 1.5 Thick Aluminium Tubular Section Of Approved Colour Pattern . Front Side Of Storage Aluminum Jali For Ventilation Of The Panel & The Measurement Of The Storage Only Front Facia Of The Storage ( Lenth X Height ) . Alll Work Complete To The Satisfaction Of The Bank / Architect . 19 Wooden Planter With Plants 31 Providing And Placing In Position Planter Made Of Phenol Bonded 19 Mm Thick Commercial Board With Top Front And Sides Finished In 1.0 Mm Thick Laminate Including Gi Trough With Sand And Marble Chips Filling And Artificial Plants As Per The Approval Of The Architect Of Not Less Than Rs.750. The Design Of The Grooves Shall Be As Per Detailed Drawing And Complete As Per Architects Direction No 0.00 20 Synthetic Enamel Sqft 1245.00 • Surface Preparation. • Rub With Sand Paper To Ensure That The Surface Is Dry And Free From Abrasions, Dust, Dirt, Grease Etc. • Fill The Holes Etc. In The Wood, If Any With Putty. • Let The Surface Dry Before Application Of Paint. How To Apply • Generally Two Coats Of Synthetic Enamel Finishes Are Required For Satisfactory Results. • After Priming The Surface With Two Coats Of Wood Primer White And One Coat Of Putty Apply First Coat Of Paint And Finish As Recommended. • Allow A Minimum Time Gap Of 8 Hrs In Between Two Coats. • First Coat Should Be Sanded With Emery Paper Grade 320 / 400 And Wipe Clean Before Application Of Subsequent Coats. • For Make And Shade Please Refer To The Schedule Of Interiors, Furniture & Finishes. 21 Fire Extinguisher Rack No 1 22 P&F Vertical Venetion Blinds Made Out Of 100Mm Wide Strips As / Shade Approved Including Supports, Sft 60 23 Post Construciton Antitermite Treatment Sqft 1260 By Drilling Holes And Injecting Chemical As Per Is Code From A Reputed Company With 10 Years Warranty Certificate 24 Sofa ( Per Seater ) Nos 6 E. Pu Molded Three Seater Waiting Seats Upholstered With Upholstery Of About Rs.400 / - Per M. ( As Per Approval Of The Architect ) With 50Mm Thick 32 Density U Foam.The Whole Structure Fabricated On Tubular Frame Powder Coated Upto 95 Microns Inclusive Of All Materials, Labour, T&P Taxes Etc. Completed To The Satisfaction Of Architect. 25 Center Table With Glass Size : 4-0X2-0 Nos 2 Civil Work 1 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is : 15622 ( Thickness To Be Specified By The Manufacturer ) Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge 12.25 Sqm 2 Providing And Laying Rectified Glazed Ceramic Floor Tiles 300X300 Mm Or More ( Thickness To Be Specified By The Manufacturer ) Of 1St Quality Conforming To Is : 15622 Of Approved Make In Colours White, Ivory, Grey, Fume Red Brown, Laid On 20Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. 3.50 Sqm 3 Providing & Fixing White Vitereous China Water Closet Squatting Pan Isi Marked ( Indian Type W.C. Pan ) With 32 100Mm Sand Cast Iron P Or S Trap, 10 / 12.5 Litrs Pvc Low Level Flushing Cistern With Fittings & Brackets 40Mm Dia C.P. Flush Pipe With Fitting & Clamps, 20Mm Over Flow Pipe With Specials And Mosquito Proof Coupling Of Approved Municipal Design, Painting Wherever Required Including Cutting & Making Good The Walls & Floors Where Required. A ) Orissa Pattern W.C. Pan Of Size 580X 440M With Integral Type Foot Rests Flush Pipe And Over Flow Arrangement. ( Parry Ware Orrisa Pan-C0117, Cistern-C8090, ) 0 Nos. B ) Same As Above But For European Type Cascade Type W.C. Pan With White Plastic Seat And Lid. Make- Parry Ware ( Parry Ware Comode White-C0285, Cistern-C8090, Seat Cover -C8071 ) 1 Nos. 4 Providing & Fixing White Vitreous China Wash Basin With C.I. Brackets Painted White, Short Padestal White 15Mm C.P. Brass Pillar Taps, C.P. Brass Chain With Rubber Plug, 32Mm C.P. Brass Waste Of Standard Pattern Including Cutting & Making Good The Walls Wherever Required. ( Parry Ware-Cascade Nxt Basin White -C0404, Short Padestal-C 0379 1 Nos. 5 Cost Of Water Supply & Sanitary Work ( Conection Of Watwer Supply Around 50 Ft From The Branch Premises & Water Pipe Goes To Water Tank Complete Is All Respects 1 Ls 6 Opening Of Ventilator In Toilet & 12 Mm Grill 3 Spacing C / C Including Civil Work Complete In All Respects. 1.00 No 7 Class 150 Brick Work In 1 : 6 Cement & F.Sand Mortar In Super Structure Above Plinth Level ( Upto Two Stories ) Including Necessary Cutting And Moulding Of Brick Work As Required. 3.25 Cum 8 12Mm Thick Cement Plaster With Cement Coarse Sand ( 1:3 ) Below Plinth Inside & Out Side In Depth Of 15 Cm. 55.78 Sqm 9 Supply & Fixing Of Flush Doors Commercial Quality Conforming To I.S. 2202 Part I ( 1983 ) Including Fixing Of Wooden Cleats & Stoppers & Including Fixing And Adjusment Of Hinges, Bolts, Locks Handles, Springs And Other Fittings And Other Fittings But Excluding Their Supply & Including Painting With Two Coats Of Black Japan Paint On All Iron Fitting Of Necessary Screws To Be Supplied Departmentally. 2.00 Nos 10 Dismenting Of Old Door & Window ( 1 Nos ) Then New Brick Wall To Be Constructed With Induded Matarial, Labourer Etc 1 Job

Key Value

Document Fees
Refer document
EMD
Refer document
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail