|
| 1 | S.I.T.C. of Solar Centrifugal Pumping Plant with Accessories |
| 2 | Supply of solar A.C/D.CCentrifugal pump (Dual energy based) with adequate capacity, motor complete with 1.0 Meter cable complete in all respectsfor 60000LPD/200 LPM at 200Mtr TDH(Total Dynamic Head) (1Set Pumps as stand bye) |
| 3 | Supply of M.S Fabricated base plate for above pump and motor set, coupling water at 200 Mts Head |
| 4 | Supply of solar pump controller (control panel cum starter) suitable for above motor as per following parameters.i)Inbuilt MPPT tracking facility ensuing over load under over voltage protection. Force Air colled, inverse exponential shutdown at the time of lack of radiation. |
| 5 | AC/DC manual selector switch auto on/off failure depending of water level in tank by sensor based floating valve. 1- 65mmdia HDPE Pipe For Cablling. 50Mtr2- 10sqmm solar cable 70Mtr |
| 6 | Solar photo voltage poly crystalline solarmoduleminumum 20000wt. As per IEC standrard (for above pump) |
| 7 | MAIN PIPING AND VALVES ( Suction / Delivery side/ By pass) as per Specification and site requirement. |
| 8 | S/o Chemical earthing material for pumping plant including earth electrode, aluminium earth strip etc as per I.E rules including sefety kit with lightening arrestor, electrode, Earth strip, Earthing compound, Earth kit etc |
| 9 | Site development for construction foundation for PV module panel and other related items |
| 10 | Construction RCC Foundation with suitable foundation Nut, Bolts and Supply & fitting of G.I. Solar Panel mounting structure including panel mounting clamp, pole etc complete in all respect. |
| 11 | Installation, commissioning and setting to work and testing of entire equipment installed at site including supply of necessary fixing accessories like insulation, teflon tape etc. |
| 12 | 10 sq.mm x 3 core copper flexible cable |
| 13 | Gauges |
| 14 | Supply of Special tools and spanners |
| 15 | Rubber insulation sheet 1 Mt. x 2Mt.x 0.025 Mt |
| 16 | Supply and fixing of Electronic type dosing system complete with solenoid coil actuated pulsar circuit, diaphragm & electronically pulp capable of delivery max, 4LPH at 5.5kg./cm2 pressure operated 220Volt single phase A.C. Supply along with chemical injection device and 100Ltrs capacity of media tank complete with accessories. |
| 17 | Liquid Chlorine required for six month maintenance |
| 18 | S/o Chlorine Testing Kit |
| 19 | Wire Mesh fencing system of suitable size to protect solar PV module system From unathorized intrusion. |
| 20 | Internal & external Electrification of Pump house |
| 21 | TPN Main Switch 63 Amp |
| 22 | Painting |
| 23 | One month TrialRunning & Five month operation, Maintenance including watch & ward. |
