Military Engineer Services-MES has published Tender For Camouflaging Works And Repair To Flooring, Plastering, Wall Seepage, Plumbing, Sanitary Fittings, False Ceiling In Various Bldg In No 01 Area At Air Force Staiton Pathankot. Submission Date for this Tender is 06-09-2023. Civil Work Tenders in pathankot Punjab. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Material and labour Preparation of old plastered/unplastered surfaces of brick, stone, or concrete wall by brooming down or steel wire brushing, scrapping down smoke snoot, moulds moss and efflorosent salts, trading oil and greasy spot and applying Two coats of weather proof acrylic exterior emulsion paint at any flooras approved of any shade/colour in camouflage pattern complete all as specified and directed by Engineer-in-Charge Note : Rate of removing of vegitation/plantation up to 3mtr deemed to be included in the rate coated by contractor. |
| 2 | Rendering of 15mm thick cement plaster in cement mortar 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement, including taking down existing plaster complete all as specified and directed by Engineer-in-Charge Note :Rate for form work if reqd to be incl in the rate quaoted by the contractor. |
| 3 | Material and labour for 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement incl taking down & with two coats of exterior emulsion paint over a coat or primer on new surface complete all as specified and directed by Engineer-in-Charge. Note :Rate for form work if reqd to be incl in the rate quaoted by the contractor. |
| 4 | Rendering dubbing coat over damaged irregular surface of patches at colms, chajja, canopy and soffits, roof projections ceiling facia etc using GI Chiken Mess of size 0.25mm thick and 20mm aparture fixed with nails including necessary scaffolding arrangement (upto 5th floor of bldg) as required at siteaverage 15mm thick in cm 1:4 over cement slurry coat thick @ 3 Kg/Sqm making the surface even followed by 5mm hick rendering in CM 1:3 furnished even and smooth including applying two coats of weather proof emultion paint including making of drip course as required complete including roughening surface of old concrete by picking sweeping clean and washing with water complete all as specified and directed by Engineer-in-Charge. Note :Rate for form work if reqd to be including in the rate quaoted by the contractor. |
| 5 | Material and labour for applying Two coats of weather proof acrylic exterior emulsion paint as approved of any shade/colour in camouflage pattern over a coat of primer including preparation of newly plastered surfaces as per manufacture instructions complete all as specified and directed by Engineer-in-Charge. |
| 6 | Material and labour for brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in cm 1:6 including demolition of existing brick work complete all as specified and directed by Engineer-in-Charge |
| 7 | All as above item No 06 above, But except bricks complete all as specified and directed by Engineer-in-Charge |
| 8 | Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, including taking down existing plaster with two coats of OBD of any tint over a coat of primer complete all as specified and directed by Engineer-in-Charge. |
| 9 | Applying3mm thick white putty on wall surfaces and rubbing the surface even and smooth complete all as specified and directed by Engineer-in-Charge |
| 10 | Material and labour for 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement including taking down existing plaster with two coats of exterior emulsion paint over a coat of primer as approved of any shade/colour in camouflage patterncomplete all as specified and directed by Engineer-in-Charge Note : Surface to be made even and smooth by filling the depression if any. Note :Rate for form work if reqd to be incl in the rate quaoted by the contractor. |
| 11 | Material and labour for preparation of old steel surface exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge |
| 12 | Material and labour for preparation of old wood or wood based surface and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge |
| 13 | Material and labour for Cement concrete 1:3:6 type C-2 (using 40mm graded agg) as in plinth, 75 mm thick and finished even and smooth without using extra cement, including demolition ofexisting cement concret complete all as specified and directed by Engineer-in-Charge |
| 14 | Material and labour for 40mm thick Cement concrete 1:2:4 type B-1 (using 20mm graded agg) as in Floor,finished even and smooth without using extra cement, including demolition ofexisting cement concrete complete all as specified and directed by Engineer-in-Charge |
| 15 | Material and labour fornon-skid coloured ceramictiles7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4and dismantling/demolition on existing surface complete all as specified and directed by Engineer-in-Charge. |
| 16 | Material and labour for colouredVitrified tiles10mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.36 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4incl demolition/dismantling of existing surface complete complete all as specified and directed by Engineer-in-Charge |
| 17 | Material and labour for Textured heavy duty exterior retrified tiles of size 300x300x10mm thick ,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and includinga screedbed of 15mm thick in CM (1:4)over 30mm thick PCC (1:3:6) incl demolition/dismantling of existing surface complete all as specified and directed by Engineer-in-Charge |
| 18 | Material and labour for Machine cut kota stone slab 18-20mm thick as in flooring, over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including15mm thick cement screed bed in cement mortor 1:4 and dismantling existing floorcomplete all as specified and directed by Engineer-in-Charge |
| 19 | Material and labour for glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement motar 1:4 and incl dismantling existing tiles complete all as specified and directed by Engineer-in-Charge |
| 20 | Renewing tiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles incl dismantling existing tiles complete all as specified and directed by Engineer-in-Charge |
| 21 | Material and labour forGranite (of any type), 18- 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including making full curving the edges and dismantling existing floor complete all as specified and directed by Engineer-in-Charge |
| 22 | Material and labour for marble work 18 to 20mm thick as in cooking platform and like (Makarana white) in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with existing Shed |
| 23 | Grinding and mirror polishing of existing Kota stone, marble stoneor mosaic flooring complete all as specified and directed by Engineer-in-Charge |
| 24 | Disconnecting carefully Water tanks of capacity exc 250 & n exc 500 Ltr, setting aside (or lowering if required) for repairs, Cleaning of tanks etc, and hosting ,reconnecting and refixing in position complete all as specified and directed by Engineer-in-Charge |
| 25 | Supply and fixing of rotational moulded polyethiene anti-microbal, virgin polmer granules with FDA approval phthalate free polymer granules and additives 100% UV stabilized lid multi ribbed designwater storage tanks (cylindrical vertical with closed top) of capacity 500 litres capacity (multi llayer ) white in colour including water tank cover (internally/inner locking arrangement for water tank cover)hoisted and fixed in position including tank nipple inlet and outlelt and connecting up pipes including brass valve ball 20 mm dia high pressure with polythene float and fly nut of complete all as specified and directed by Engineer-in-Charge |
| 26 | Disconnecting carefully Water tanks of capacity exc 500 & n exc 1000 Ltr, setting aside (or lowering if required) for repairs, Cleaning of tanks etc, and hosting if required reconnecting and refixing in position complete all as specified and directed by Engineer-in-Charge |
| 27 | Supply and fixing of rotational moulded polyethiene anti-microbal, virgin polmer granules with FDA approval phthalate free polymer granules and additives 100% UV stabilized lid multi ribbed designwater storage tanks (cylindrical vertical with closed top) of capacity 1000 litres capacity (multi llayer ) white in colour including water tank cover (internally/inner locking arrangement for water tank cover)hoisted and fixed in position including tank nipple inlet and outlelt and connecting up pipes including brass valve ball 20 mm dia high pressure with polythene float and fly nut of complete all as specified and directed by Engineer-in-Charge |
| 28 | Taking up or down steel tubing 15mm bore and connections complete all as specified and directed by Engineer-in-Charge |
| 29 | Supply and fixing in repair 15mm bore tubes CPVC with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and directed by Engineer-in-Charge |
| 30 | Taking up or down steel tubing 20 mm bore and connections complete all as specified and directed by Engineer-in-Charge |
| 31 | Supply and fixing in repair 20mm bore tubes CPVC with all fittings short pieces and fixed complete to walls, floor, ceiling etc all incl taking down existing GI tubing complete all as specified and directed by Engineer-in-Charge |
| 32 | Material and labour for cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth complete all as specified and directed by Engineer-in-Charge |
| 33 | Supply and fixing in repair vetreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anty syphonage pipe etc. and including "P" or "S" trap complete incl making good to floor complete all as specified and directed by Engineer-in-Charge |
| 34 | Supply and fixing in repairs Vitreous China wash down water closet pan of size 540X375X415mm (pedestel pattern) white,including P/S trap connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe,plastic water closet seat of white in colour,back closed pattern (soft close) with flat bottom,and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed by Engineer-in-Charge |
| 35 | Supply and fixing in repair vitreous china wash hand basin white of bowl size 550 x 440mm including waste coupling and PVC waste pipe, 32mm dia, 15 mm dia bore pipe pillar tap cast copper alloy with capstan heads chromium plated fancy to be fixed in M S brackets complete all as specified and directed by Engineer-in-Charge |
| 36 | Supply and fixing 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to rawal plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engineer-in-Charge |
| 37 | Supply and fixing in repair heavy duty dual flush 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle incl brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and directed by Engineer-in-Charge |
| 38 | Supply and fixing PVC connection 15mm bore size with two brass nuts and washers of length 450mm complete all as specified and directed by Engineer-in-Charge |
| 39 | Supply and fixing of Cabinet mirror plastic bodyfor toilet of size 350x450mm with 4mm thick looking mirror complete all as specified and directed by Engineer-in-Charge |
| 40 | Supply and fixing of Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets whereever required and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge |
| 41 | Supply and fixing of Sinksmade of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or demolition of existing cemented/marble kitchen sink and making good with providing Marble strip complete all as specified and directed by Engineer-in-Charge. Note : Marble will be measured and paid separately. Overall size of sink 610 x460mm and bowl size 550 x400mm |
| 42 | Supply and fixing in replacement stainless steel plate rack of size 900mm X 900mm X 250 mm thickness of sheet not less than .9 mm(ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 43 | Supply and fixing in repair bib taps fancy type cast copper alloy ISI marked with crutch or butter fly handle with wall flange high pressure screwed down screwed for iron pipe of 15mm bore weight not less 400 gram complete all as specified and directed by Engineer-in-Charge |
| 44 | Supply and fixing in repairs bib taps suitable for 15mm bore weight not less 700 gram pipe long body fancy type brass CP with, Capstan head screwed down screwed for iron pipe or brass ferrule completefixed in repaircomplete all as specified and directed by Engineer-in-Charge |
| 45 | Supply and fixing in repairs cast copper alloy chromium plated fancy type central hole basin mixer with capstan head for high pressure suitable for 15mm bore pipe not less than 800 gm complete all as specified and directed by Engineer-in-Charge |
| 46 | Supply and fixing in repirs wall mixture brass chromium plated suitable for fixing with GI pipes 15mm dia complete complete all as specified and directed by Engineer-in-Charge and Wight not less than 1200 gram . |
| 47 | Angle valve ,brass chromium plated fancy type with capstan head handle screwed down high pressure, including CP brass wall flanges, screwed for 15 mm bore pipe connection fixed in repairs complete all as specified and directed by Engineer-in-Charge |
| 48 | Shower rose brass chomium plated 100mm diawith CP arm 150 mm dia with or without swivel joint, with & including CP brass arm and wall flange, fixing to steel pipe or union as in complete all as specified and directed by Engineer-in-Charge |
| 49 | Supply and fixing in repairs 32 mm dia bore PVC flexible pipe for wash hand basin complete all as specified and directed by Engineer-in-Charge |
| 50 | Supply and fixing in repairs plastic sheet white in colour soft closed pattern with flat bottom and cover including chromium plated hinge device complete all as specified and directed by Engineer-in-Charge |
| 51 | Material and labour for PCC 1:4:8, type D-2, (using 40mm graded crushed stone aggregate) in foundation filling and mass concrete, (as in sunken floor) with spout pipe 50 mm dia up to 600 mm long oras per site requirement including demolition of existing surface complete all as specified and directed by Engineer-in-Charge |
| 52 | Supply and fixing Doctor fixit Pidifin 2k high performance 2 component flexible Acrylic polymer modify cement base water proofing coating in two coat 1mm thick dry film mixed in ratio 2:1 by weight or 1.5:1 by volume product of M/S Pidilite Industry Limited Makers of Fevicol adhesive brand complete all as specified and directed by Engineer-in-Charge. |
| 53 | Supply and fixing in replacement 100mm/75mm bore cast iron floor trap with CP grating including jointing to waste pipe fixed in cement concrete type B-1, 1:2:4, complete all as specified and directed by Engineer-in-Charge |
| 54 | Supply and fixing grating round 100mm/75 mmsize of CP complete all as specified and directed by Engineer-in-Charge |
| 55 | Supply and fixing 100mm bore sand cast iron soil waste and vent pipe ISI marked in any length with or without ears with lead joints laid in floor/walls complete all as specified and directed by Engineer-in-Charge |
| 56 | All as above item No 54 here inbefore but 75mm bore complete all as specified and directed by Engineer-in-Charge. |
| 57 | Supply and fixing 100mm dia cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-Charge. |
| 58 | Supply and fixing 75mm dia cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-Charge. |
| 59 | Supply and fixing 100mm dia, branch pieces, single (equal or unequal) ordinery or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engineer-in-Charge |
| 60 | Supply and fixing 75mm dia, branch pieces, single (equal or unequal) ordinery or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engineer-in-Charge |
| 61 | Supply and fixing in repair 110mm borePVC(SWR) pipes single socketed, in any lengthlaid in trenchs or in floor complete all as specified and directed by Engineer-in-Charge |
| 62 | Supply and fixing in repair 110mm borePVC(SWR) pipes single socketed, in any lengthfixed to walls complete all as specified and directed by Engineer-in-Charge |
| 63 | Supply and fixing in repair 110mm borePVC(SWR)bends complete all as specified and directed by Engineer-in-Charge |
| 64 | Supply and fixing in repair 110mm borePVC(SWR)single T complete all as specified and directed by Engineer-in-Charge |
| 65 | Supply and fixing in repair 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge |
| 66 | Removing of vegetation / plantation on the wall/ roof/ any position of up to double storey building including necessary scaffolding upto 6 m height and roots superfacial area n.exc 2 sqm each and making good of surface byapplying chemical treatment with GLYPHOSATE 41% including removing /refixing of CI/GI pipe lines complete all as specified and directed by Engineer-in-Charge. (Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately) |
| 67 | Supply and fixing in repair GI spout pipe medium weight 50mm bore dia of length 450mm set in PCC 1:4:8 porous concrete and make the external portion with CM 1:3 with and including water proofing @ 200 ML per bag complete all as specified and directed by Engineer-in-Charge |
| 68 | Supply and fixing PVC lid for poly water storage tanks of capacity 500/1000 litres including PVC hinges and PVC locking both complete complete all as specified and directed by Engineer-in-Charge |
| 69 | Cleaning and removing all scale and dirt etc from tanks and mouth of circulating pipe incl disconnecting existing tanks and refixing in position after cleaning for exc 250 & n.exc 500 litres capacity of tank including wrighting date of cleaning on tank by synthetic enamel paint complete all as specified and directed by Engineer-in-Charge |
| 70 | Cleaning and removing all scale and dirt etc from tanks and mouth of circulating pipe incl disconnecting existing tanks and refixing in position after cleaning for exc 500 & n.exc 1000 litres capacity of tank including wrighting date of cleaning on tank by synthetic enamel paint complete all as specified and directed by Engineer-in-Charge |
| 71 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation board/slab/blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge |
| 72 | Material and labour forPosition suspended false ceiling system using T-grid suspended ceiling grid system. The size of grid shall be 600 x 600mm with GI frame work main runner 38 x 24mmx 3600 mm, cross tee 25 x 24 x 600mm / 25 x 24 x 1200mm and wall angle 24 x 24 x 2540mm ( thickness of the material of 0.30 mm), using 9mm thick ceiling panel laminated with PVC film on front face and foil back available in due drop texture as per IS-2095, part-I-1996, fixed in the grid of T-grid suspended ceiling grid system duly suspended by 4mm dig GI bar hanger from the purlins of the roof with butter fly clipscomplete all as specified and directed by Engineer-in-Charge |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
