Tender For Installation And Energisation Of Basasankar- Ll (Revial) Lips Under Tarva Block In Subarnapur District
Tender Value
11.02 Lakhs
Estimated cost
Bid Submission
24 Aug 2023
0 days left
EMD
11022
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Subarnapur → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Installation And Energisation Of Basasankar- Ll ( Revial ) Lips Under Tarva Block In Subarnapur District
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation of foundation in hard soil within initial lead of 50m & lift of 1.5m including dressing and levelling the bed etc. |
| 2 | Filling in F&P with excavated materials including well watered and rammed.(2/3 of respective earth work) |
| 3 | Filling F and P with sand, well watered and rammed |
| 4 | Cement concrete (1:4:8) with 4cm (1½”) size hard granite metal (Crusher Broken) |
| 5 | RCC/Cement Concrete (1:2:4) with 12mm (½”) size hard granite chips (Crusher broken) |
| 6 | K.B. Brick masonary in cm(1:6) in foundation and plinth (25cm X 12cm X 8cm size) |
| 7 | K.B. Brick masonary in cm(1:6) in Superstructure work ( 25cm X 12cm X 8cm size ) |
| 8 | 12mm thick Cement plaster in CM (1:6) over brick work |
| 9 | Cement punning over plastering |
| 10 | Rigid smooth centering shuttering for R.C.C. work including all cost etc. complete Roof slab, R.C.C. floor, Landing Balcony, Projection sun shed & Chajja, Sheles |
| 11 | Dry brick rammed Khoa (10 cm) thick well watered and rammed including all cost etc. complete |
| 12 | 2.5 cm. thick A.S flooring with cement concrete (1:2:4) including punning using 12mm size C.B. chips including at cost etc. complete |
| 13 | Labour charge for M.S. reinforcement for R.C.C. work including cutting bending, binding & typing the grills & placing in position including cost of binding wire & reinforcement 18 to 20 guage per Qntl. |
| 14 | Painting two coats with approved paint on steel. |
| 15 | Priming over coat with any approved primer. |
| 16 | Distempering two coats to walls with distermper of approved shade on new work to give an even shade(Labour only) |
| 17 | White washing 3 coats with shell lime. |
| 18 | Costof Iron Door (size 1.2x1.98m)&Iron Window (size 0.6mx0.75m) |
| 19 | Cost of C.C Ventilator (size 0.45x0.30m) |
| 20 | Cost of outlet |
| 21 | Provision for Masonary steps to the Pump Chamber |
| 22 | Labour charges for writing reqd. data & information on the Brick pillar |
| 23 | Cost of 300 mm R.C.C. hum pipe( NP 3 )as per specificationsincluding laying & fitting |
| 24 | Cost of 200 mm Ø PVC. pipe (Cl-I) 2.5 Kg/cm2 to deliver water at highest counter |
| 25 | Cost of 200 mm Ø PVC. pipe (Cl-II) 4.0 Kg/cm2 to deliver water at highest counter |
| 26 | Labour charges for laying and fitting of 200/250 mm Ø PVC pipe |
| 27 | Cost of 200 mm x 200 mm x 110 mm ØMS Raiser Tee with accessories |
| 28 | Cost of 15.00 HP Centrifugal monoblock pumpsethaving 0.028 cumec discharge and 24 Mtr. head |
| 29 | Cost of 15 HP Control Pannel with Auto star delta starter having Volt Meter ,Amp Meter & MCB havimg fitting space for capacitor and main switch |
| 30 | Cost of 63 Amp -400 V.T.P. Main Switch confirming to IS No.4064 |
| 31 | Cost of Panel Board made out of 18 gauge CR sheet |
| 32 | Cost of Motor Hood made out of 18 gauge CR sheet |
| 33 | Base Plate made of MS Channel with holes |
| 34 | 6 KVAR Capacitor |
| 35 | Electrical Earthing ( for 2nos 1 set ) |
| 36 | Electrical installation and energisation |
| 37 | Cost of 3x16mm2 T.D. cable |
| 38 | Cost of 4mm2 PVC Wire |
| 39 | Cost of 100 mm Ø G.I. Pipe (MD) |
| 40 | Cost of100 mmØ G.I. Bend |
| 41 | Cost of 100 mmØ C.I. Foot Valve |
| 42 | Cost of 100 mmØ G.I. Flange |
| 43 | Cost of 100 mmØ Sluice Valve |
| 44 | Cost of 100 mmØ C.I.Reflux Valve (NR) |
| 45 | Cost of 200mm MS Pipe(MD) 5.4mm thick |
| 46 | Cost of 200mm MS/Steel slipon flange |
| 47 | Cost of 200 mm Ø PVC End Cap |
| 48 | Cost of 200 mm Ø PVC coupler (4 kg/cm2) |
| 49 | Cost of River Bank cutting & shaping for const. of P.F. |
| 50 | Cost of 200 mm PVC Equal Tee |
| 51 | Cost of 50 mmØ Air release valve with saddle & Raiser pipe |
| 52 | Cost of Butterfly Valve |
| 53 | Cost of 100x100x25mm G.I. Tee with Plug for priming |
| 54 | Cost of 200 mmx110 mm PVC/G.I./M.S. Reducer |
| 55 | Misc. Welding charges for \"Z\" joint, \"S\" bend, etc. |
| 56 | Labour Charges for Welding of 6\"/8\" GI/MS Pipe |
| 57 | Labour charges for delivery andfitting including fitting of priming Tee, sluice Valve, NR Valve, air release valve and riser Tee etc and installation including cost of petty material like nut bolt rubber insuration etc. |
AI Tender Summary
Tender Timeline
Aug 16, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 25, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender