Providing Furniture To Girls Hostel In S.V. Music Dance College, Tirupati, TIRUPATHI-Andhra Pradesh

Providing Furniture To Girls Hostel In S.V. Music Dance College, Tirupati-1 40.00 Supply Of 2 Tier M.S Steel Cot With Following Specification As Per The Drawing Enclosed: Cot Over All Size:2060Mm ( L ) X 965Mm ( W ) X 1790Mm ( H ) Height Of Lower Cot From The Floor : 400 Mm Height Upper Cot From The Floor:1400Mm Vertical Gap Between Two Cots:995Mm Legs At Corner = 4Nos: Ms Square Tube If 50Mm X 50Mm X 1.5Mm Thick. ( Conforming To Is :4923:1997 ) Bed Frame Assembly ( Upper&Lower ) :The Bed All Round Frame Assembly Is Made Up Of Rectangular Tube Of 50Mmx25mmx1.5Mm Thick. Bed Frame Central Supports ( Upper & Lower ) :2 Nos Of 50Mm X 25 Mmx 1.5Mm Rectangular Tubes - For Each Bed. Corner Stiffners Below The Upper & Lower Cot:4Nos. Of Ms 3Mm Thick L-Angle Of 50Mm X 50Mm X120mm Length - For Each Bed. Bed Top Sheet: Crca Sheet Of 1.50Mm Thick With U Shape Crimp Of 50Mm X 25Mm At All Four Sides ( Conforming To Is: 513:2008 ) . Head Board ( Upper&Lower ) : 25.4 Mm Ms Square Tube Of 1.50Mm Thick-One Horizontal Only For Each Bed. Ladder Assembly: Ladder Assembly Is Made Up Of 25.4Mmx25.4Mmx1.5Mm Thick Ms Square Tube ( 4 Horizontal ) . One Handle Should Be Batached To The Laddder At Top Level For Comfortable Climbing. Safety Guard / Side Supports For Upper Cot: Cot Side Supports Are Made Up Ms Round Tubes Of 25Mm Dia X 1.50 Mm Thick. Bed Holding Supports At Four Corners For. 2 80.00 Supply Of Rubberised Coir Mattresses Of Over All Size 1920 X 915 X100 Mm Wilh Sandwich Technology Wlth 25 Mm Thick Top Layer Of Polyurethane Foam Wlth 28 Density As Per Lsl Standards ( Lndentation Hardness @ 40 % Deflecftion ≥ 30 Kgf ) And 2 Layer Is 24 Mm Rubberised Coir Sheet Made With Needle Felt Technology Of 90 Density Categorised As Extra Firm By Using Virgin Coconut Fibre And Natural Rubber Latex As Per Ls Standards. After Flexing Test Of 250000 Strokes Indentation Hardness Difference Should Not Be More Than 20% ( Ls Clause 6.1 ) . The 3Rd Layer Is 28 Mm Highly Firm Pu Form With 28 Density As Per Lsl Standards ( Indentation Hardness @ 40 % Deflecftion ≥ 40 Kgf ) The 4Th Layer Is Again 24 Mm Rubberised Coir Sheet Of 90 Density Made With Needle Felt Techniology As Mentioned Above. All These 4 Layers Are To Be Covered With Kora Cotton Cloth Of 110Gsm At All Sides. The Total Mattress Should Be Covered With St Mark Rexine Cover. The Coir Mattresses Should Be Standard And Approved Make Best Quality Confirming To Ls 8391 / 1987 And The Density Of Coir Should Meet Firm Grade Standards. The Weight Of Coir Mattresses Should Be Of 12.22 Kgs Minimum Etc, Complete As Directed By The Department. Each Coir Mattresses Should Be Printed Ttd Month And Year Of Supply On Outer Rexine Cover And Should Be Identical.

Refer document

INR 7300.0 /-

INR 7.27 Lakhs /-