Request For Quotation For Partner Empanelment For Supply Of Nicu Nursing Infrastructure -1. Infant Baby Warmer with Stand (Supply, installation and demonstration) Micro Controller based Electronics Controls: Servo Skin/Manual Mode Pre-warm: Use the equipment with 30% Heater Output in Manual Mode. No need of calibration required for temperature probe. High Intensity Quartz/Calrod Heating element for effective Radiation Halogen Observation Lamp Parabolic Reflector design to send uniform heat to the bed surface. Memory Backup to restore set temperature and previous mode, in case of power failure. Optimum Bed dimensions ensure optimum work space for the nursing staff. Comprehensive Alarms and safety cut-offs. Instant Warming and Uniform heating & Short wave heater ensures instant warming Automatic Safety heater cut-off at 39 C in any mode Controller Electronics: High Speed Micro-controlled Mode of Operation: Servo Skin, Manual Skin Mode control range: 30.0 38.0°C. Manual Mode timer: 1 min 15 min (selectable) Percentage of heater output: 10% - 100% in 10% increments Memory Back-up: Equipment restores the previous settings Programmable mute time: The user can select the mute time Safety heater cut-off: If the skin sensor is removed from the babys skin Over-temperature heater Cut-off: If the skin temperature is>39°C in any Skin/manual mode Temperature sensor (probe): Thermistor sensor Accuracy of skin sensor: ±0.1°C Accuracy of skin probe Interchangeability: ±0.2°C Power rating : ~230V, 50 Hz Max. Heater Wattage: 600 Watts Max. Power requirement : 700 watts Examination lights : 12V, 50W Halogen lamp 2 castor 4 nos (2 with brake & 2 without Brake) Monitor Shelf : 1 no Should have provision to keep undersurface phototherapy light. Height adjustable Operating noise level : <50dbA Alarms Skin sensor is removed from the babys skin Skin temp high : >1.0°C.from the set temperature, Skin temp low : < 1.0°C.from the set temperature, Skin temp probe fail: If the Skin probe is short or fail Over temperature: If the skin temp. Is >39°C, Heater Fail System Fail: Electronic component defect Environment Operating temp: 15.0°C to 35.0°C, Storage temp : -20.0°Cto 60.0°C, Operating Humidity: 5% to 90% RH, non-condensing Storage Humidity : 0% to 99% RH, non-condensing Altitude: sea level to 1.9 miles Quality: ISO 13485:2016 Electrical & Product Safety : : IEC 60601-1 & IEC 60601-1-2 , IEC 60601-2-21 , IEC 60601-2-50 Should have complied with European CE 93/42 EEC Standards Certification from a Notified body. Preferred Make: Make: DRE/Neotech/Zeal/GE Healthcare/Drager/ARDO/Healforce/Phoenix/V-care/IBIS/Kenmark/David/TRIMPEKS/Frontline/Fanem. 2.Baby Incubator for NICU(Supply, installation and demonstration) Thermal Performance: Consistent air temperature. Bi-directional air flow. Internal Noise Level: low operating sound levels assure a developmentally supportive environment for infants. Double Wall Hood: Double wall hood is designed to decrease radiant heat transfer between the baby and the incubator wall. The inner wall can be easily removed for cleaning without the use of tools. Air Screen: The Air Screen creates a barrier of warm air when the access panel is open. Electrical Electrical connection : Ac 230 V, 50 Hz, Max Power rating : 370VA Max Incubator with fixed/variable height Heater power rating: 300W, Electronics : Micro controller with sell test function Mute Time: 2 min 20 min programable, Incubator control Modes : Servo Air and Servo Skin Co2 level with in the Hood : Less than 0.8% when mixture of Co2 in air is delivered at 750ml/min at a point 10cm above the center of mattress Temperature Accuracy Skin /Air mode : Accuracy ± 0.2 C Max temperature : 39°C Warm-up time : 25-35 min per 10°C (at 23°C Ambient temperature) Initial Temp overshoot : <1.0°C.Temperature uniformity : <0.8°C Sensor : Thermistor Probe interchangeability : Accuracy ± 0.2°C (calibration not required) Noise level inside Incubator : <60 db) Air velocity over the bed : <10 cm/sec (at 10cm above the center matress) Relative humidity : >80% at 10 cm over bed center Air filter capacity : 99% (0.5) Air intake volume with filter: 25 l/min μ & without filter 250l/min Bed tilting (tilting by C clamp) :± 8°up/down SET TEMPERATURE RANGE Air mode : 20°C to 37°C, 37.1°C to 39°C temperature override mode Skin mode : 30°C to 37°C, 37.1°C to 38°C temperature override mode OXYGEN CONCENTRATION Oxygen input 5 lpm : 25% to 45% 0₂ Oxygen input 15 Ipm : 45% to 70% 0₂ Humidification : Low/high <80% Skin temperature low/ high Air temperature high / low Alarms Failure of Air, Air Flow, Heater, Skin Probe, Air Probe, System, Power Temperature 39 in any mode Safety Heater is electronically cut off if air/skin temperature inside the incubator exceeds 39.0°C IEC 60601-1 Specification Type of protection against electric shock: Class 1 Mode of Operation: Continuous Electrical Safety: IEC 60601-1 & IEC 60601-1-2 , IEC 60601-2-19, Weight : Min 50 kg Height of bed from floor : 900 mm Dimensions of bed : 700 mm x 400 mm Castors : 4 diameter antistatic (2 locking and 2 non-locking) IV Maximum load : 1.5 kgs Maximum Monitor load : 3.0 kgs Maximum baby weight to be: 5.0 kgs Should have complied with CE> Preffred Make: Neotech/Zeal/V-care/IBIS/Kenmark/Frontline/SST/Electromeg/Comen/Bistos/Fanem/VNG/Phoenix/Ziraffe/BPL/Dragor 3. Baby Bassinet / Baby Cradle for NICU (Supply, installation), to be used with phototherapy light. The system should be detachable fire retardant enclosure for light source Adjustabble Height Should have provision to undersurface phototherapy Can be used with standing phototherapy The unit can also be usable as observation trolly. Bed Size approximate: 50x75 cm Height : Adjustable from 400 to 600 cm the units should have anti-static 2” castor 4 nos, 2 with brakes. 4. Phototherapy Unit(Standing with Stand) , Moveble with 2-4 Wheels The LEDs of each unit should be therapeutic high wattage blue & white LEDs, Min 12 Nos The Wavelength should be between 455 to 465nm The high irradiance at skin level should be > 45μw/cm2/nm at a distance of 30 cm Should have an uniformity ratio of > 0.40 The LED Lamps used should be rated to last up to 20,000 hrs Should have dual digital cumulative hour timer for LED usage and patient exposure The light source system should have overheat protection with power cutoff for temperature Uniform Light distribution LED Unit Tilt up to 90 Degree and allowing use with warmer IEC 60601-1 Specification Type of protection against electric shock : Class 1. 5. Undersurface phototherapy Light The LEDs of each unit should be therapeutic high wattage blue & white LEDs, Min: 12 nos The Wavelength should be between 455 to 465nm The high irradiance at skin level should be > 45μw/cm2/nm at a distance of 30 cm Should have an uniformity ratio of > 0.40 The LED Lamps used should be rated to last up to 20,000 hrs Treatment Timer ensures auto cut-off when elapsing the set time No infrared rays ensures minimize the water loss Should have dual digital cumulative hour timer for LED usage and patient exposure The light source system should have overheat protection with power cutoff for temperature Uniform Light distribution LED Unit can be usesable with warmer IEC 60601-1 Specification Type of protection against electric shock : Class 1. 6 Neo Ventilator (HFO) (Supply, installation and demonstration) 1. Invasive, non invasive , O2 Theraphy(HFNC) 2. Min 13 Large Color touch display 3. Basic Modes: VC AC, VC SIMV, PC AC, PC SIMV, CPAP-PSAV + advance mode ( PRVC, APRV, BiPAhasic , MMV) 4. Ncpap, Nippv Modes for Neanates 5. Inbuilt nebuliser 6. 3 Wave forms/ 3 Loos/trends 7. 32 Patient parameter 8. Inspiratory hold/Expiratory Hold/PO.1 /Intrinsic PEEP, Lung Recruitment Maneuver (P-V tool), proportional pressure support Cerification: CE certified, ISO and IEC certified Prefferred Make: Acutronics/BPL/Hamilton/SCHILLER/Maquet Servo/GE/Comen/Philips/Drager/Siemens/Medisys/vyaire/tecme/Metran/Fanem/Getinge/Briovent/Advin/Narang/Skanray/Lifeline/Billicare/Magnamed/SLE/Medi/ Honmed/ Medtronic/Resmed/Smith/Becton/Mindray/Trivitron/Medtronic/Resmed/Newport/ 7 Bubble CPAP (Supply, installation and demonstration) Should have latest technology and capable of giving Bubble CPAP therapy to neonates for Preterm and Term Babies Weighing from 400 gms , also capable of giving HFNC therapy to neonates and pediatric cases. Machine should have options to be used as Bubble CPAP, HFNC, Nasal CPAP and T - Piece Resuscitator Should have LCD Touch Screen 4” & above graphical display Should have digital Real Time Airway Pressure Monitoring and displayed on screen Should have digital Real Time Fio2 Monitoring and displayed on screen Should have built in compressed Air Source & no external air compressor should be required or mounted on trolly or taken from central air source Should work with Low Flow Oxygen Input with maximum input flow of 15LPM and 1 Bar input pressure Should have inbuilt blending mechanism for FiO2. Should have good quality calibrated blender for mixing of Air and Oxygen with selectable FiO2 (21% to 100%). The machine should have loss less blending mechanism & FiO2 monitoring. Equipment should also work without oxygen input Should have builtin saftey valve with preset mode specific safety cutoff Should have universal connections for circuit and attachements Should have inbuilt battery back-up upto 2 hours Should have Settable Audio & Visual alarm for Low Pressure, High Pressure & Safety Pressure Cutoff Limit Should be able to be mounted on the mobile stand for easy moving, and the stand should be equipped with Bubble Generator Holding clamps with easy fixation. Should be able to set output flow of 1-10 LPM Can set FiO2 from 21-100 % Accuracy of Flowmeters should be +/- 4%Accuracy of pressure measurement should be +/- 1 cmH2O Accuracy of FiO2 should be +/- 3% Should be able to set CPAP pressure in Bubble CPAP mode from 3 - 10 cmH2O Should be able to set CPAP pressure in Nasal CPAP mode from 0 - 15 cmH2O Setable pressure in Auto T - Piece Mode should be - PEEP: 0 - 15 cmH2O & PIP: 10 - 40 cmH2O Should have settable as well as inbuilt Safety Over Pressure Valve up to 40cm H2O Should be supplied by Manufacturing company having ISO 13485 certifications & CE for medical devices Manufacturer should be an Indian company with product made in India Should be provided with Single Use Nasal Prongs (Small, Medium, Large) Single Use Nasal Masks (Small, Medium, Large), Single Use Head Bonnet (Small, Medium, Large, XL) Single Use RAMS Cannula (Small, Medium), Single Use Neonatal Patient Circuit with Single Heater wire and Humidifier Chamber with autofeed Should have audio - visual alarm Should be provided with US FDA-certified Servo Humidifier Temperature Sensor Probe and Heater Wire Adaptor Humidifier Specification Mode – Should have Auto mode servo controlled for invasive, noninvasive ventilation & High Flow Default Setting – Should be 37 °C (invasive), 31 °C (noninvasive) Should have an automatic temperature setting in invasive & non-invasive mode Temperature display Should have the following alarms: Temperature Sensor, Limb Failure, Chamber & Patient End Temperature Alarm Silence facility Electrical Specs. – Input Voltage 220-240 V / 110-127 V / 100V; 50/60Hz Standards – IEC 60601-1, IEC 60601-1-2, EN ISO 8185, CE Certified, USFDA Preferred Make: Fisher & Paykel/Drager/Biomed/Hamilton/Electrogenics/Fanem. 8 Pulse Oxymeter (Supply, installation and demonstration) Hand Held Pulse Oximeter with Enhanced Spo2 Accuracy during Motion artifacts and Waveform and Numeric Value display 2.4 OLED Color Display 96 hours Data Memory Suitable for Adult, Pediatric and Neonatal application Mains as well as Battery operation Visual alarm indicator Hand Held Unit with Standard Accessories: Spo2 Sensor with extension cable Adapter for Mains connection Adaptor for Mounting Hand Held Unit Operating Manual Manufacturer should be ISO 13485 certified 9 Multipara Monitor (Supply, installation and demonstration) Should have facility to display ECG, RR, HR, PR, Spo2, NIBP, single Temperature as standard parameters with in built rechargeable battery back up of at least 6 hrs of operation. Display: Touchscreen Color TFT LCD display of size 8” or more. Should display at least 4 waveforms or more of dual trace ECG (Cascaded ECG), SpO2 and respiration simultaneously. Should have ST Analysis & Arrythmia Analysis Should have Digital technology to sense the SPO2 in hypotensive, shivering & motion condition. Should have facility for displaying different screen configurations. Should have audio visual alarms for all parameters & should be user selectable Should have audio alarm silence selectable for 60 sec / 120 sec Should have volume adjustable for Audio Alarms Should have different color visual alarms as per set priority Should have audio for QRS beep and volume should be adjustable Should be able to store & display at least 72 hrs of graphical trends of all parameters. Should be suitable for monitoring adult & pediatric patients. Should be able to give visual & audible alarms with three levels of volume adjustment on violation of any monitored parameter. The monitor should be European CE approved. Should be ISO 13485 certified. Power input to be 220-240VAC, 50Hz fitted with Indian plug Warranty: Should have Minimum 1yrs. of manufacturer warranty. Make: Niscomed/Philips/GE Healthcare/Medtronic/Mindray/CMS/SIEMENS/ChoiceMMED/Nidek/BPL/Biotronic/Honeywell/Nihon/Spacelabs/SCHILLER 10 Syringe Pumps ((Supply, installation and demonstration) Display should be 3.5 inch Backlit Color LCD or Touch 1. Should have Multiple Infusion Modes ( Rate mode, Weight Mode ,Time mode, Sequence mode) 2. Should have 9 Occlusion Levels 3. Should be support syringes of all standard brands 4. Should have Auto-detection of syringe size 5. Should Compatible with 5, 10, 20, 30 and 50(60)ml syringe 6. Built-in Drug library (100 drugs) 7. Should have infusion rate:0.1-2000ml/h,0.01ml/h (0.01ml/h increment till 100 ml/hr , 0.1ml/h increment from 100-1000ml/h and 1ml/h increment from 1000-2000ml/h) 8. Should have Bolus rate:0.1-2000ml/h 9. Should have KVO 0.1-5ml/h 10. Backup power for minimum 6 hours (Optional 12 hours) 11. Quoted item should be USFDA/ European CE with 4 digit notified body. 12. BIS approved or Manufacturer should be ISO 13485 certified Preferred Make: Mindray/Biocare/DRE/Byond/GE Healthcare/AKAS/Skanray/BPL/DRE/Braun/Fresenius/Contec 11 Infusion Pumps (Supply, installation and demonstration) VOLUMETRIC INFUSION PUMP Technical Specification: Flow rate range: 1 to 1000 ml/hr. in normal mode, 1 ml / hr. increment, Micro infusion mode: 0.1 to 100ml/hr. with 0.1 ml/hr increment. Flow rate accuracy: Accuracy of ±2% or better. Infusion time: Adjustable from 1 minute to 96 hours, 1 minutes increments. Setting mode: Flow rate, flow rate + volume, Volume/time, flow rate +time, Ramp-up / ramp-down, sequential, bolus, Induction / loading dose, microinfusion. KVO rate: 3 ml / hr. adjustable Pressure limit: 750 mmHg, adjustable from 100 to 900 mmHg (50 mmHg increment) History data log: Up to 500 last data events. Configuration: Infusion mode, Key board lock, KVO, pressure limit, display of drug name, time and hour setting, language, LCD contrast, alarm sound level, ward name, secret Code, max. allowable flow rate, air bubble size, recall of last parameter on power ON, display mode volume accumulating, end of infusion pre alarm setting. Should have infusion line disconnection alarm Should have infusion line pressure monitoring in mm of Hg Power supply: Power input to be 220 – 240V AC, 50Hz fitted with Indian plug of appropriate rating Battery Backup: 3-6 Hour Quoted item should be USFDA/ European CE with 4 digit notified body. BIS approved or Manufacturer should be ISO 13485 certified. Warranty: Should have 1yrs. of manufacturer warranty. Make: Mindray/Biocare/DRE/Byond/GE Healthcare/Niscomed/AKAS/Skanray/BPL/DRE/Braun/Fresenius/Contec 12 Cardiac table (Supply, installation) Cardiac Table Hospital adjustable Table Hospital table made with mild steel material Laminated board Top Mounted on four 5 cm swivel castors Manually adjustable Height Epoxy powder coated Top size:-76(L)*40(W)cm Height:-76/106c No 13 Blanket Phototherapy (Supply, installation and demonstration) fibre optic based technology Features: Spectral Irradiance: Small pad - 70 μW/cm /nm (+/- 25%) and 9 point check Large pad - 49 μWcm /nm (+/- 25%) and 6 point check Wavelength: 460-470 nm Fiberoptic lightpad, Small : 12 x 30 cm (light-emitting area) Fiberoptic lightpad, Large : 20 x 33 cm (light-emitting area 15000-20000 Hour LED Capability Safety: No UV/IR/ emission Length of fibre bundle: approx 170 cm Sound level : <44 db at 1m Power Rating: 30W Device Automatically shuts off in the event of light engine over heating. Should have complied with European CE 93/42 EEC Standard Certification from a Notified Body ISO 13485 Certified Preferred Make:Bilihu/Biophoton/Neotech/BPL/IBIS/Phoenix No 14 Ambu Bag for NICU for providing critical care during cardiopulmonary resuscitation, for patients undergoing endotracheal intubation or surgery under general anesthesia in NICU No 15 Laryngoscope set for NICU No 16 Diaper Weighing Machine No 17 Baby Weighing Machine No 18 POC ABG Machine (Supply, installation and demonstration) Analyzer should be small lightweight (<1kg) handheld capable of measuring pH, pCO2, pO2, Na+, K+, Ca++, Cl-, Glucose, Lactate, Creatinine/BUN & Hematocrit. Calculated parameters: cHb, ctCO2, BE, BEecf, sO2, HCO3, eGFR, A-Gap, A-aDO2. All the parameters should be performed simultaneously on a single-use disposable test card. Fast analysis time of less than 1 minute after sample introduction. Analyzer should accept a small sample size of less than 100 μl. Input: Patient ID, Age, Gender, Height, temperature, FiO2, Sample type. Sample types: Arterial, Venous Cord & Capillary whole blood. The analyzer should have the provision of storing at least 1000 patient and QC results. Should display normal, outside reference range & Critical patient results with color-coded tiles. The test cartridges should be self-contained with all the sensors & reagents and should not be separate. The test cartridges should be room temperature storable without the requirement of refrigeration. The Analyzer should be provided with a dedicated wireless thermal Printer. The Analyzer should use Amperometric, Potentiometric, and Conductometric measurement. The Analyzer should have in-built barcode readers for expiry control and patient data entry. Analyzer should have dual-power operation through AC adapter and/or rechargeable Li-Ion battery. Analyzer should have on-board animation videos for user guidance. Should have wireless connectivity facility for HIS/LIS, remote updates etc. Should be USFDA and CE certified for all products and parameters. Preferred Make: Abbott/Siemens/Radiometer/Edan 19 Jaundice Meter A simple, effective, portable non-invasive jaundice meter quick and easy to obtain bilirubin readings with minimal disturbance to the baby Advanced optics and processing for highest accuracy Suitable for screening infants from 35 weeks’ gestation Power input: 3 Vdc( 2AA batteries) Measurement range: 0-32mg/dl measurement accuracy: ±1.5 mg/dl operating temperature: +10 to 50 C Comliance: EN 60601-1 20 Vein Viewer Inbuilt rechargeable battary 3 intensity mode Android charger 8 Led total( 6 red+2 Amber ) ISO 9001:2015, ISO 13845:2013, GMP, And CE certified 21 Embrace Warmer (Supply, installation and demonstration) 1. The Embrace Warmer uses an effective phase change material to stabilise rapidly the temperature of an infant suffering from hypothermia. 2. The Embrace Warmer is light and portable. The baby can be held in the mother’s arms when the warmer is being used. 3. Hygienic & Durable: It can be reused several times. Cleaning is easily done using soap and water. Maintains temperature of ~37 degree C for at least 4 hours* (380mm x 220mm, 1.3kg) Precision heating mechanism prevents overheating Duration of at least 4 hours at ambient temperature greater than 25 C Does not require constant power supply approx 15 watt of power consumption Preferred Make: Phoenix/Philips/Neotech/GE Healthcare 22 Oxygen hood for NICU (Infant use) Transparent and curve-shaped OXYGEN HOOD for neonatal oxygen therapy made with medical grade polycarbonate material. Medical grade silicone flaps in the head opening area to adjust the neck size and make sure optimum oxygen concentration. SMALL - 21 cm ( Diameter ) - 16.5 cm ( Height ) - 12 cm ( Neck Opening ) MEDIUM - 21 cm ( Diameter ) - 19 cm ( Height ) - 14cm ( Neck Opening ). Accessories to be provided: Tubings-01. Shapes have enough space for baby head movement. Its comes without any sharp corners and easy to clean and disinfect. The manufacturer should be ISO 13485 certified. Fully autoclavable. Make: Neotech/VNG/David/IBIS 23 Crashcart Crash Cart SS Frame 304 Overall Approx size 940mm L x 490 mm W x 1535 mm H Stainless Steel Tubular Frameprinciples for No Six Removable Plastic Bins & Two Polystrene Lockable Storage units with Three Drawers Each Four Swivel Castors, 150 mm Dia (Two with Brakes) Complete with Corner Buffers, Oxygen cylinder Holder, S S I V Rod, S S Top & Shelves, Cardiac Massage Board SS 304 24 BPC O2 flowmeter with jar Usage NICU Flow Rate 15 L/min Display Analog Tube Cover Material Poly Carbonate Body material Brass Accuracy (Flow rate) +- 3% 25 Portable Suction Machine - Technical Specifications: Minimum Flow Rate: 17 LPM Minimum Collection Capacity: 600 ml Make: Philips/Omron/Drive DeVilbiss Healthcare/ResMed/Niscomed/Oxymed/Lifeline/Rossmax 26 Cold Light Source (Supply, installation and demonstration) Use: Cold Light source is used for accessing tiny arteries and veins of the babies Should have light intensity controlled with a smooth rotary potentiometer pressing button Should have minimum dual control having 2 halogen/xenon/led lamps Should have SMPS-based design ensures smooth working of the light source within the voltage variation. Dimensions/Weight: length280mm, width 220mm, height from the floor:130mm Weight up to 5kg Heat dissipation Heat is disbursed through an exhaust fan (if applicable). Portability Hand-held device Power requirements 230VAC + 10%, 50 Hz Operating Range: +15°C to 35°C environment Storage Range: -10°C to 60°C environment Humidity: Operating Range: 15% to 90% RH Non-Condensing Storage Range : 50% to 90% RH Variable Intensity : 0 to 100% continues. Optical Cable: 6mm Diameter & 1m Length ON time: 5min & 10min selectable. Display parameters :% of intensity, usage hours & timer Alarm indication: Fan fail, Temperature Sensor fail, Light source over temperature. Preferred make: Neotech/Zeal/GE Healthcare/Drager/ARDO/Healforce/Phoenix/V-care Certifications: Quality: ISO 13485:2016, Electrical Safety: IEC 60601-1, EMC Safety: IEC 60601-1-2 Should complied with European CE 93/42 EEC Standard Certification from a Notified Body Spares: Illumination lamps: 2 nos. spares Preferred make: Neotech/Zeal/GE Healthcare/Drager/ARDO/Healforce/Phoenix/V-care 27 Dressing Trolley with Bowl & Bucket for use in NICU S.S. Frame work S.S. Shelves with four side railing On Castors Size : 76 x 46 x 81 cm 28 Instrument Trolley SS with 4 Wheels Overall size 60 L x 45 W x 80 H cms MS Tubular Construction with SS Top & Shelf Three Side Guard Railing on Upper shelf SS 304 29 Revolving Stool Four Legs S S Tubular Construction S S Revolving Top Adjustable Height with M S Screw Mechanism Epoxy Powder Coated30 IV Stands I.V. Stand, 31 dia 2- hook IV stands wheel mounted on a plastic base with MS Pipe , adjustable height from 55” to 95” 31 Infant T-Piece Resuscitator (Supply, installation and demonstration) can deliver oxygen levels ranging from 21% through to 100%, from a flow meter or blender. The resuscitator has a PIP control, as well as a maximum pressure relief valve that prevents the accidental delivery of excessively high pressures. resuscitator should features an accurate, easy-to-read, medical quality manometer, and can be mounted on a pole, rail, wall, infant warmer, or incubator. Manometer Range -20 to 80 cmH2O [mbar] Manometer Accuracy +/-2.0% of Full-Scale Deflection Maximum Pressure Relief @ 7LPM 1 to 66 cmH2O O [mbar](dependent on flow rate) Storage Range: 40% to 90% RH Non-Condensing Operating Range: 15% to 90% RH Non-Condensing Recommended Patient Body Weight 0 to 10 kg (22 lb) Delivered Oxygen Concentration Up to 100% depending on the gas supply Operating time* (400 L cylinder) 50 minutes @ 8 L/min components: gas supply line; gas inlet adaptor; test lung; spare max pressure relief Quality/Test approval Quality: ISO 13485:2016 Device Standard: ISO 10651-5 ISO 10993 MDD Product classification: class IIb Protection against increase of liquid : IPX4 European CE Certified Preferred make: Zeal/Fisher& Paykel/Neotech/GE Healthcare/Neotech/Flexicare 32 Oxygen panel and Piping (Supply, installation and demonstration) Minimum 3 Oxygen Outlet. Pipe should be of ISI mark. approximate Piping lenth: 10 ft Pipe thickness must be of 12mm. Mox regulator should be there to control the pressure. Angle & T Copper 33 Oxygen cylinder (Filled) (Supply, installation and demonstration) Jumbo Type with regulator and trolley 34 SYRINGE PUMP STAND (Supply & installation) No. of shelves: 1 shelve 2 Saline Hook Framework material: SS Mounted on Moveble Caster/Wheel with electrical socket where 8 Syringe pump can be plugged 35 Observation Trolley Soft Mattress for comfortable Baby laying Large working Area Mattress Tilt ±30° on both side Provision to take X-Ray without disturbing the baby 4 nos collapsible Acrylic panels with Plastic hinges 4” castor 4 nos (2 with brake and 2 without brake) Storage Tray option Underneath the bed 36 Hospital Child Bed 1650x780x630, height adjustable side rail, back rest lifting angle. Epoxy Powder Coated 37 ICU Bed Motorized Electric operated Five Functions Motorized Hospital Bed Electrically operated with Luxury castors Central lockingSize: 2120X1000X460-720mm (LxWxH) • Function at Back Rest, Footrest, Hi/Lo Adjustment, Forward Tilting, Backward Tilting with Cable Remote Control. • Epoxy Powder Coated Bed Frame, Mounted on Central Locking Luxury Castors. • Bed Board Link of Soft, PP Hiding Side Rails. Quick release handle at back side Pillow and Mattress 4” thick made of PU Foam with one side Rexine & other side cotton cloth With Food Table and Bed side Locker Make: Hill-Rom/Stryker/Getinge/Linet/Invacare/Paramount/Arjo/Joerns /Drive DeVilbiss/Skytron/Steris or equivalent brands having Bed production facility of US FDA registered. Bed to be European CE and facility to be ISO 9001, 14001 and 13485 approved 38 ICU Bed, Manual Five Functions Motorized Hospital Bed manually operated with Luxury castors Central locking Size: 2120X1000X460-720mm (LxWxH) • Function at Back Rest, Footrest, Hi/Lo Adjustment, Forward Tilting, Backward Tilting with Cable Remote Control. • Epoxy Powder Coated Bed Frame, Mounted on Central Locking Luxury Castors. • Bed Board Link of Soft, PP Hiding Side Rails. Quick release handle at back side Pillow and Mattress 4” thick made of PU Foam with one side Rexine & other side cotton cloth With Food Table and Bed side Locker Make: Paramount/Arjo/Joerns /Drive DeVilbiss/Medline /Savion/Khera/SNG/Narang/BPL/Sigma/ACME/Prana or Equivalent Brands 39 Glucometer Technical Specifications for Glucometer: Measurement Range: 20 to 600 mg/dL (1.1 to 33.3 mmol/L) Accuracy: ±10% deviation from laboratory reference values Sample Size: Maximum 0.5 microliters of blood per test Testing Time: Maximum 10 seconds Memory and Data Management: Minimum memory storage capacity of 500 test results, with data transfer capability to electronic medical record systems or computers Display: Clear and easy-to-read display, preferably with a backlit feature for enhanced visibility Power Source: Long-lasting battery life, support for disposable batteries and rechargeable options, with low battery status indication Make/Brands: Accu-Chek (Roche)OneTouch (LifeScan)/Dr. Morepen/Johnson & Johnson/Omron/ Bayer Contour/ Beurer/Abbott /Apollo/Smart Care 40 Bp Apparatus Manual (Mercury) ISO / CE Standard Included Components Adult size Cuff with velcro closure , owners manual , Mercury Fixed ready to use Item Weight 450.0 grams Material Type Forged Number of Items 1 Size Regular Special Features High Accurate Readings Specific Uses For Product Clinic Long Lasting Heavy Duty Silicone Tubings CE Certified , 4.2 mm Capillary & Hard Metal Body Product should include all the necessory accesorries required for intented use. Clear Reading Make: diamond/Romson/Dr Trust/Philips/GE/BPL/Omron/Rossmax/HealthSense/Beurer 41 Digital Bp Apparatus Manual ISO / CE Standard Included Components Adult size Cuff with velcro closure , owners manual Type: Upper Arm, Fully automated Display: LCD Measurement Method: OSCILLOMETRIC METHOD Minimum Pressure Measurement Range: 20 mmHg Maximum Pressure Measurement Range: 280 mmHg Minimum Pulse Measurement Range: 40 beats/min Maximum Pulse Measurement Range: 180 beats/min Pulse Measurement Accuracy: +5 Pressure Measurement Accuracy: +3 Size Regular Special Features High Accurate Readings Specific Uses For Product: Clinic, training nurses Long Lasting Heavy Duty Silicone Tubings Product should include all the necessory accesorries required for intented use. Make: Dr Trust/Philips/GE/BPL/Omron/Rossmax/HealthSense/Beurer/Romson/Diamond 42 NIBP (Non-Invasive Blood Pressure) Machine: 1. Measurement Range: 1.1. Systolic Pressure: 40-260 mmHg 1.2. Diastolic Pressure: 20-200 mmHg 1.3. Mean Arterial Pressure (MAP): 30-240 mmHg 2. Measurement Method: 2.1. Non-invasive measurement using inflatable cuff 2.2. Utilizes oscillometric or auscultatory method 3. Accuracy: Provides clinically acceptable blood pressure readings 4. Cuff Size: Multiple sizes available for different arm circumferences 5. Display: Clear display of blood pressure measurements and additional information 6. Memory and Data Management: Stores and retrieves previous readings, data transfer capability 7. Power Source: Battery or mains power, battery option for portability Brands: Omron / Philips / GE Healthcare / Welch Allyn / Nihon Kohden / Dräger / Mindray / Schiller / BPL Medical Technologies / Contec Medical Systems No 43 Stethoscope Dual non-stick acoustic tubing provides insulation for superior sound Included accessories: 2 extra sets Comfort Seal ear tips, spare adult and pediatric clear PVC diaphragms, pediatric diaphragm assembly, pediatric bell, infant bell and ID tag Intended use: Adult, Infant, Pediatric approximate weight: 150-250 gm Earpieces: Earpieces should occlude your ear and block out most or all room noise. They should be comfortable yet snug and should follow the natural forward angle of the ear canals. Tubing: The tubing should be sturdy and no longer than absolutely necessary. Head: The head of the stethoscope should have a bell (a cup-shaped side) and a diaphragm Manufacturer is certified for ISO 13485 Medical devices. Brands: Littmann/Rossmax/Romson/HealthSense/Technocare/Omron/MDF No 44 Ultrasonic Mesh Nebulizer Machine Technical Parameters: Nebulization Technology: Ultrasonic mesh for fine aerosol production. Medication Compatibility: Works with a range of medications. Particle Size: Produces small particles for effective inhalation. No Silent Operation: Quiet for patient comfort. Battery Life: Long-lasting for portable use. Dosing Control: Precise medication delivery. Easy Maintenance: Simple disassembly and cleaning. Portability: Compact and lightweight design. User Interface: Intuitive controls for easy operation. Mask Compatibility: Suitable for various mask sizes. Certification: Complies with relevant industry standards. Make: 1. Philips/Omron/Dr. Morepen/Rossmax/Agaro/HealthSense/BPL/Beurer/Dr. Trust 45 Nebulizer for NICU Particle Size: Fine aerosol particles for neonatal inhalation. Medication Compatibility: Suitable for various NICU medications. Silent Operation: Quiet operation for infant comfort. Dosing Accuracy: Precise medication delivery control. Continuous Nebulization: Capable of extended treatment. Oxygen Compatibility: Accommodates oxygen therapy. User Interface: Intuitive controls for easy use. Safety Features: Prevents overmedication risks. Compact Design: Space-efficient for NICU placement. Easy Maintenance: Disassembles for cleaning. Mask Compatibility: Fits neonatal masks. Certification: ISO-compliant manufacturing. Make: 1. Philips/Omron/Dr. Morepen/Rossmax/Agaro/HealthSense/BPL/Beurer/Dr. Trust 46 Oxygen Concentrator (Supply, Installation and demonstration): for Use in NICU Oxygen Concentrator 5 LPM: Flow Rate: 5 liters per minute Oxygen Purity: Typically around 93% (+/- 3%) Power Source: Electric (AC) Weight: Standard range, usually between 14 to 18 kg Dimensions: Compact and portable design Noise Level: Low decibel range for quiet operation Filters: Built-in air intake filters for clean air supply Oxygen Delivery: Continuous flow mode User Interface: Intuitive controls and LCD display Alarms: Visual and audible alarms for low oxygen concentration and power failure Accessories: Nasal cannula, humidifier bottle, filter replacements Compliance: Designed for medical use and regulatory compliance Make: Philips/DeVilbiss/Nidek/Inogen/Oxymed/AirSep 47 12 Channel ECG Machine with Monitor and Electrodes Technical Parameters: - Channels: 12 simultaneous channels for comprehensive cardiac monitoring. - Electrodes: High-quality electrodes for accurate signal acquisition. - Display: Clear display of 12-lead ECG data for real-time analysis. - Printing:High-resolution printing for detailed ECG reports. - Sampling Rate: High sampling rate for precise waveform capture. - Interpretation: Built-in ECG interpretation algorithms for efficient analysis. - Filters: Signal filters to eliminate interference and ensure accuracy. - Recording Speed: Adjustable recording speeds for various assessments. - Connectivity: USB or Bluetooth connectivity for data transfer. - Battery Backup: Reliable battery backup for uninterrupted operation. Make: GE Healthcare/Philips/Schiller/BPL/Nihon Kohden/Edan Instruments/Mindray/Cardiac Science/Contec 48 Steriliser Make: GOLEY / SURYA or Equivalent 49 Spring balance Medical Spring Balance - Technical Specifications: - Wide Measurement Range - High Accuracy - Durable Construction - Clear Display - Tare Function - Overload Protection - Portable Design - Easy Calibration No 50 Intrauterine device (IUD) thats inserted into the uterus for long-term birth control (contraception). T-shaped plastic frame has copper wire coiled around the stem and two copper sleeves along the arms that continuously release copper to bathe the lining of the uterus. It produces an inflammatory reaction in the uterus that is toxic to sperm, which helps prevent fertilization. No 51 Pelvimeter Pelvimeter - Technical Specifications: - Material: High-quality Medical Grade Materials - Measurement Range: Suitable for Various Pelvic Measurements - Accuracy: Precise Measurement Graduations - Easy-to-Read Scale - Lightweight and Portable Design - Ergonomic Handle for Comfortable Use - Durable and Long-lasting Construction - Suitable for Clinical and Educational Use No 52 Delivery Couch - Technical Specifications: - Convertible Design: Easily Converts into Operating Table for Emergency Caesarian Section - Adjustable Backrest for Patient Comfort - Removable Headboard for Versatility - Leg Supports for Secure Positioning - Removable Foot Section for Accessibility - Height Adjustable: Minimum 60 cm, Maximum 90 cm - Smooth Mobility: Equipped with Diagonally Lockable 12 cm Diameter Castors - Corner Bumpers for Protection - Removable Drain Pan for Easy Cleaning No 53 Foetal Dopler - Ultrasound frequency: 3MHz Ultrasound intensity: <10mW/cm2 Power supply: Alkalinity battery Display: 45mm×25mm LCD FHR Measuring range: 50~240bpm FHR resolution: 1bpm FHR accuracy: ±1bpm Power consumption: <1W Dimension :135mm ×95mm ×35mm Weight:500g Configuration: Main body 3MHz probe Feature Table: Functions: Display B/W Backlight:Yes Build-in speaker : Yes Battery indicator:Yes FHR display: Yes Auto power off: Yes Various work modes :Yes Alkalinity battery:Yes Make: Life Line / BPL/DIPEL/Phillips/ Sonoline/Angelsounds/Huntleigh/Bistos/Contec or equivalent No 54 Automatic Hematology Analyzer: Specifications: Measurement Parameters: Complete Blood Count (CBC): Hemoglobin, Hematocrit, Red Blood Cells (RBC), White Blood Cells (WBC), Platelet Count, Mean Corpuscular Volume (MCV), Mean Corpuscular Hemoglobin (MCH), Mean Corpuscular Hemoglobin Concentration (MCHC), Red Cell Distribution Width (RDW), and other relevant parameters. Differential Blood Count: Neutrophils, Lymphocytes, Monocytes, Eosinophils, Basophils, and other relevant subtypes. Throughput: High throughput capacity capable of processing a large number of samples per hour, ideal for high-volume laboratories and hospitals. Sample Types: Accepts various sample types, including whole blood, serum, plasma, and diluted samples. Sample Volume: Minimal sample volume required for analysis to minimize patient discomfort and conserve sample volume. Automation: Fully automated operation for sample handling, analysis, and result generation. Automated sample identification and barcode scanning for sample tracking and data integrity. Analysis Method: Utilizes advanced impedance or flow cytometry technology for accurate and reliable blood cell analysis. May Noinclude laser-based optical systems for specific measurements. User Interface: Intuitive and user-friendly graphical interface for easy operation and navigation. Touchscreen display with clear visualization of data and results. Connectivity: Built-in connectivity options such as Ethernet, USB, and LIS (Laboratory Information System) integration for data transfer, result reporting, and remote access. Quality Control: Integrated quality control features to ensure accuracy and precision of results. Calibration options and automated quality control checks to maintain instrument performance. Maintenance: Self-diagnostic capabilities for proactive maintenance and troubleshooting. Automated cleaning and maintenance routines to ensure instrument reliability and longevity. Size and Weight: Compact and space-saving design suitable for laboratory environments. Portable options available for on-site or point-of-care testing. Power Requirements: Operates on standard electrical power supply (e.g., 110-240V, 50-60Hz). Compliance: Meets relevant regulatory standards and certifications (FDA, CE, ISO). Make: Sysmex Corporation/Beckman Coulter Inc./Siemens Healthineers/Abbott Laboratories/Mindray Medical International Limited/Roche Diagnostics/Horiba Medical/Nihon Kohden Corporation/Boule Diagnostics /ERBA/Bio-Rad 55 Laryngoscope Sets, S.S. (With S.S. handle) Satin / Dull Finish, with 4 S.S. blades Size: 1,2,3 & 4 56 Nasal Cannula Delivers:24-30% oxygen, Flow rate :1-4L/min, Manufactured from soft, non-toxic medical grade material, Made up of kink resistant PVC tube 57 High Flow Nasal Cannula Deliver:21-100% oxygen, Flow rate: upto 60L/min, Manufactured from soft, non-toxic medical grade material, Made up of kink resistant PVC tube 58 Venturi mask Delivers: 24-60% oxygen, Flow rate: 2-15L/min, Tube Length-7 ft, Manufactured from soft, non-toxic medical grade material, 100% latex free 59 Non-rebreather mask Delivers: 85-90% oxygen, Flow rate: 10-15L/min, Bag on mask with valves stopping almost all rebreathing of expired air, Manufactured from non-toxic medical grade material 60 Face Mask Delivers: 40-60% oxygen, Flow rate: 05-10L/min, Manufactured from non-toxic medical grade material 61 Digital Haemoglobinometer - Photometry based system for estimation of haemoglobin. 2- Linearity range- 2g/dl to 25 g/dl or beyond.. 3- Open reagent system.. 4- LED light source. 5- Display of results in g/dl. 6- Connectivity to PC and printer. 7- Accessories to be supplied: along with equipment a- Micro Pipette - 2.5 ml : 1 No. b- Lancing device - 1 Unit c- Lancettes : 50 Nos- d- cuvettes with rubber caps – 5 Nos e- capillaries – 50 Nos Make: Labtronics/EKF/Mission/ACCU/Accon
