Name of Work:Furnishing Laboratory Space with Custom made Laboratory Tables/Benches
Sl. No.
Item Description
1
Custome Made Laboratory Tables/Benches
2
WALL TABLE MODULE: (3730 x 750 x 900 mm ht.) Specification: (2 table with 2 number of PP sink with tab each and 1 table without PP Sink)Material of ConstructionUnder Bench Modules: Under bench modules to be made of 1 mm thick pre-coated Galvanized Iron sheet (TATA / JSW Steel – GI Sheet) and completely finished with Epoxy powder coating. These modules to be provided with bottom cupboard with Lockable doors and aluminum anodized flush handle. The under-bench modules arranged as per the diagram. The base of the modules to be provided skirting panels with adjustable feet (Tolerance from 5-20 mm to correct unevenness of flooring).Colour Options: Colour combination of IVORY and drawer fronts contrasting BLUE by powder coating technique.Table Top: To be made of finely polished epoxy resin coated 18 mm ± 2 mm thick black Colour Granite with rounded edges.PP Sink with Tap (560 x 355 x 245 mm): PP Sink With Outlet Nipple and Three Way Tap as per the diagram.Technical Specification: Material of Construction: Polypropylene; Chemical Resistance • Gasket / \"O\" Ring Nitrile Rubber to Avoid Leakage; • Outlet Connection: 1 1/2\"B.S.P ; Color: Black
3
ISLAND TABLE MODULE WITH TWO TIER REAGENT RACK AND ELECTRICL POWER POINT: (3730 x 1200 x 900 mm ht.) Specification: Material of ConstructionUnder Bench Modules: Under bench modules to be made of 1 mm thick pre-coated Galvanized Iron sheet (TATA / JSW Steel – GI Sheet) and completely finished with Epoxy powder coating. These modules to be provided with bottom cupboard with Lockable doors and aluminum anodized flush handle. The under-bench modules to be arranged as per the diagram. The base of the modules to be provided skirting panels with adjustable feet (Tolerance from 5-20 mm to correct unevenness of flooring).Colour Options: Colour combination of IVORY and drawer fronts contrasting BLUE by powder coating technique.Table Top: To be made of finely polished epoxy resin coated 18 mm ± 2 mm thick black Colour Granite with rounded edges.
4
DOORS FOR ALREADY EXISITING CUPBOARDS: (4 sets of cupboard per laboratory)Specification: Material of Construction (Size: 1375 x 825mm/ 1375 x 412mm/ 1375 x 438mm/ 1375 x 438mm)Doors: Doors to be made of 1 mm thick pre-coated Galvanized Iron sheet (TATA / JSW Steel – GI Sheet) and completely finished with Epoxy powder coating. These modules to be provided with bottom cupboard with Lockable doors and aluminium anodized flush handle.Colour Options: Colour combination of Fronts contrasting BLUE / YELLOW / GREEN / RED / ORANGE for aesthetic appeal by powder coating technique.
5
BENCHES WITH DESK: (20 Number) Specification: (30X30 CRCA Square tube and wooden top and back rest)Top: To be made of 16 mm thick plywood with half-nosed or quadrant post forming lengthwise and post forming to be done on both sides. 2 mm thick edge tape binding on the shorter side. Frame Structure: To be made of 30 x 30 x 1.2 mm thick CRCA Square tube and all frame ends to be welded closing the edges of the square tube. All joints to be MIG welded. The welds to be coated with a pre-prep primer to increase the quality of the subsequent chemical-resistant powder coating. The bottom of the leg frame of the desk and bench to have adjustable feet levelers with tolerance from 5-20 mm to correct unevenness of flooring.Dimesnison: Centre Table Frame Type : 1500 x 1200 x 750mm ht A s per the diagram.
6
Laminar Air Flow Cabinent: Specifications: Floor standing Model.• Working size: 3’x2’x2’; Overall Size: 1000x800x1950 mm• Retention Particle size: 0.3 microns• Noise level : 65 decibel on ‘A’ scale +/- 5• Velocity: 90 feet minute +/- 20• Front Door: 4 mm thick polycarbonate, foldable type.• Lamp: UV illumination; fluorescent tube fittings• Pressure: Inclined manometer 0-50 mm range.• Other Accessories: 6/16 Amp power point, Castor wheels & Power chord• Power supply: 230 V, single phase 50HzHEPA FILTER• Media: Ultra clean glass fibre paper• Type: Mini-pleat HEPA filter, separator less• Oveall size: 900x600 mm• Retention: 0.3 micron with a max 25 mm WG• Efficiency: 99.98% /Grade H13 rating.Blower Assembly• Outer rotor type blower system, balanced aluminium centrifugal impeller driven single phase motor, enclosed in a PU coated GI casting directly connected to the filter chamber.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
