Uttar Pradesh Projects Corporation Limited has published Tender For Renovation And Development Work Of Unified Revenue Command Center, Mm-11 Room (3Rd Floor) At Khaniz Bhawan, Lucknow.. Submission Date for this Tender is 24-08-2023. Civil Work Tenders in lucknow Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 17-Aug-2023 | Date | Date | 24-08-2023 |
| Sl. No. | Item Description |
| 1 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 2 | 25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with :Second class teak wood |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) . |
| 4 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm |
| 5 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineerin- charge and as per manufacturer"s specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60 |
| 6 | Supply & fixing of 12 mm th. HDMR board in ceiling with pasting flexi mirror glass sheet forfalse ceiling.including frame work complete in all. |
| 7 | Providing and fixing at all height wall panelling with phenol bonded Bamboo Mat board conforming to IS:13958-1994 including providing and fixing to frame work made of 50mm x 50mm hardwood plugs including cutting brick work and fixing in cement mortar and making good the wall etc. and also providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws all complete as per direction of Engineer-in-Charge.12mm thickness |
| 8 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). |
| 9 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.With stainless steel cover plate minimum 1.25 mm thickness |
| 10 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in charge |
| 11 | 12 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1:6 (1 cement: 6 coarse sand) |
| 12 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. |
| 13 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 14 | Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 15 | Providing and applying POP work on wall surface for make decorative design prepare the surface even and smooth complete. |
| 16 | Steel work in ISMB including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 17 | Providing and fixing of Stainless Steel 3D Letters. Complete in all |
| 18 | Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by Engineer-in-charge with in a distance of 60 mt. (200 feet) |
| 19 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 20 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead |
| 21 | Wiring points for light with 1 sqmm.FR PVC insulated multistrand single core copper condutor cablein PVC conduit pipe partly concealed in wall and partly laid in slabalongwiththereinforcementbeforeconcreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects. |
| 22 | Same as above item but for Fan Point |
| 23 | Same as item No.(1) but for5 Amp plug point |
| 24 | Same as item No.(1) but forcall bell point |
| 25 | Supply and wiring of submain 1 number 2.5 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. |
| 26 | Supply and wiring of submain 2 number 4 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FR PVC insulated multistranded copper conductorcable as earth contunity wire etc. complete in all respects. |
| 27 | Supply and wiring of submain 2 number 6 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 14 SWG copper earthcable as earth contunity wire etc. complete in all respects. |
| 28 | Supply and wiring of submain 2 number 10 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 10 SWG copperearthcable as earth contunity wire etc. complete in all respects. |
| 29 | Supplyfixingand concealing of20mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of work .( for Telephone/Televisionpoints) |
| 30 | Conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for proper completion of work. |
| 31 | Supplyfixingofelectronic fan regulator(modular) 120-280 V. ISImarked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work. |
| 32 | Supplyandfixingofrecessmountinground15to18 WattLEDDownLighterhavingPowdercoateddie cast aluminium housing with heat sink, diffuser/Reflector and driver set complete in all respect. CAT- AAA |
| 33 | Supply & fixing of Call Bell Of Approved Make on matching polished MDFEG/TEAK PLY board including making connectionetc. as required. |
| 34 | Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work. 600x480x200 mm. size |
| 35 | Supply and fixing of 240 volts "L" series miniature circuit breaker 6 Amp. To 32 Amp. (10 K A ) in existing MCB, DB complete with connections as required. (CAT: B)6 - 32 amps. |
| 36 | Supply fixing of 40 Amp. 4 pole mcb(10KA). (CAT: B) |
| 37 | Supply and fixing of power plug with 15A/250 V flush type switch and 5 Pin 15 A/250V flush type universal socket in suitable M.S. box of 175mmx100x50mm size with phenolic laminated bakellite sheet cover 3mm thick fixed with brass machine screws and cup washer. |
| 38 | Supply and fixing Single Pole MCBS Blanking Plate complete in all respects. |
| 39 | Supply and burying of 600mm x 600 mmx6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No.8to10SWG G.I.wire in 15mm dia G.I.pipe upto switch board (from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete inall respects. |
| 40 | Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respects. |
| 41 | Supply and fixing of two number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of work as directed at side. |
| 42 | Supply and Fixing of WM HS TORPEDO (New) Wall Mounting Fan 400mm Sweep Colour White complete in all respect. |
| 43 | Supply andlayingofaluminiumconductor PVC. insulated armoured,served,sheathed cable 1100volts gradeat 750mmbelow ground level overacushion of 75 mm thick sand around & protected with brick onsides & top on surfacethecablerunshallbe fixed on M.S. clamps etc. of suitablesize completeinallrespect. The armouring of the cable shall be properlyconnectedwith the earth conductor by clamps etc.Make- Havels / Pasaka 16 sqmm4core |
| 44 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.75mm X 75 mm X 60mm Deep |
| 45 | Supplying and fixingfollowing size/modules, GI box along with modular base& cover plate for modular switches in recess etc as required. 1 or 2 Module (75mm X 75 mm) |
| 46 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 47 | Supplying and fixing Profile Light in wall cove . |
| 48 | Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steelcomplete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required.Size- 1500 MM |
| 49 | Supply,Installation,testingand commissioning of VRF/VRV Air Conditioning System Compresing Outdoor Units, Indoor Units, CopperPiping withInsulation, Ducting ,Duct Lining, Duct Inslation, Grills, Diffusers Electrical Panel, Power & Control Cable, Earthing etc. (Top Star rated aviable at the time of estimation.) |
| 50 | COSTOF DESIGNER FILMON TOUGHENED GLASS |
| 51 | Network switch with 24 x 10/100/1000 Base-T PoE, 4x 10G SFP+ ports, Port Standards- IEEE 802.3 10BASE-T Ethernet (twisted-pair copper), IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper), IEEE 802.3u 100BASE-FX 100 Mbps over fiber optic, IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted-pair copper), IEEE 802.3z 1000BASE-X 1 Gbps over fiber optic, IEEE 802.3az Energy-Efficient Ethernet (EEE), IEEE 802.3x Flow Control, IEEE 802.3ae 10 Gigabit Ethernet, IEEE 802.3af/at, NetworkCables- UTP Cat. 5, Cat. 5e (100 m max.) Duplex Mode- Full/Half-duplex for 10/100 Mbps, Full-duplex for 1000 Mbps, Media Interface Exchange- Auto MDI/MDIX adjustment for all twisted-pair ports, Switching Capacity-128 Gbps, Transmission-Store and forward, MAC Address Table-16K, Static MAC Address-256 entries, Packet Buffer Memory- 12 Mbits, CPU Memory- 2G DDR3, Flash Memory- 64 MB, PoE Standard- IEEE 802.3af/at, PoE capable ports-24,Safety- CB, UL, BSMI, CCC, EMI- CE Class a, VCCI Class A, FCC Class A, IC, BSMI with 03 years warranty. |
| 52 | 12U Rack with conforms to DIN 41494 or equivalent standard, construction-Welded, Front Door-Lockable Toughened Glass Door, Basic Frame-Steel, Equipment Mounting-DIN Standard Slots, Mounting Angle- 19” Mounting angles WITH POWER db, Fan and Cable manager with 03 years warranty. |
| 53 | Cat6 cable with 4 pairs unshielded twisted pair (UTP) cable, Conductor metal solid bare copper, color code Graywith 03 years warranty. |
| 54 | I/o with back box with 03 years warranty |
| 55 | 24 Port fully loaded patch panel with Identification ID plate, PVC,with 03 years warranty. |
| 56 | 1 meter UTP patch cord with 4 pairs unshielded twisted pair (UTP) cable, conductor metal bare copper, insulation material HD-PE,PVC UL94V.0, RJ 45 8P transparence color, Insulation resistance 35M 0hm (max.), Cable to plug tensile strength 20 lbs, 10Base-T, 100 Base-TX, Fast Ethernet, 1000 Base-T, Certification-UL 444 CUL listed, RoHs with 03 years warranty. |
| 57 | 2 meter UTP patch cord with 4 pairs unshielded twisted pair (UTP) cable, conductor metal bare copper, insulation material HD-PE,PVC UL94V.0, RJ 45 8P transparence color, Insulation resistance 35M 0hm (max.), Cable to plug tensile strength 20 lbs, 10Base-T, 100 Base-TX, Fast Ethernet, 1000 Base-T, Certification-UL 444 CUL listed, RoHs with 03 years warranty. |
| 58 | Power cable 1.5 mm with 3 core, fire proof with 03 years replacement warranty |
| 59 | PVC pipe for laying of CAT6e wire and Power cable having 03 mtr. Length with 03 years warranty |
| 60 | Caping casing for laying of CAT6e wire and having 1.5 mtr. Length with 03 years warranty |
| 61 | Installation charges alongwith laying of PVC pipe, laying of CAT6e wire inside the PVC pipe, fixing of racks, fixing of patch panel, fixing of I/o boxes, fixing of electric boards as required, laying of optical fibre cable inside the PVC pipe, splicing and commissioning of pigtails and other work as required with 03 years onsite warranty |
| 62 | Supply & fixing of Blinds of window 9 nossize (2700x1800 ) |
| 63 | LOGO (KOREAN SHEET) 2X2 |
| 64 | GST Extra as applicable |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
