Tender For Construction Of 30000 Lit Oht Tank At Anna Nagar In Kilsathamangalam Panchayat Of Vandavasi Block Thiruvannamalai Dist Under 15Th Fc (Bt)-2023-2024
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Aug 2023
0 days left
EMD
15700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
vandavasi → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of 30000 Lit Oht Tank At Anna Nagar In Kilsathamangalam Panchayat Of Vandavasi Block Thiruvannamalai Dist Under 15Th Fc ( Bt ) -2023-2024
BOQ
| Sl. No. | Item Description |
| 1 | Construction of 30000 lit OHT Tankat Anna nagar in kilsathamangalam Panchayat |
| 2 | Earth work excavation below G.L. and depositing on bank within an initial lead of 10.00 m and an initial lift of 2.00 for the following classification of soil, First depth of 0 to 2 m, In hard stiff clay, stiff black cotton soil, hard red earth, sales, murrams, gravel, stoney earth, earth mixed with small sized boulders and hard gravelly soil S.S.20B |
| 3 | Second depth of 2m From 2m to 4 m below GL |
| 4 | Plain Cement Concrete 1:4:8 (one cement, four sand and eight hard granite broken stone of 40mm size ISS gauge) forfoundation and footing including mixing, placing, ramming ,finishing curing etc. complete in accordance with standard specification and as directed by the TWAD Board Officers. |
| 5 | Reinforced Cement Concrete Mix M30 grade using 10mm & 20mm Hard blue granite Broken stone (machine crushed)excluding the cost of RTS rods for reinforcement and centering, strutting, shutteringbut including cost of all materialsmixing, laying, Vibrating the concrete with mechanical vibrators, ramming, consolidating,finishing and curing etc., Complete and as directed by the TWAD Board Officers. |
| 6 | 0m to 1.50m below GL |
| 7 | 0m to 4.50m above GL |
| 8 | 4.50 m to 7.32 m above GL |
| 9 | 7.32 m to 10.98 m above GL |
| 10 | 10.98 m to 14.64 m above GL |
| 11 | 14.64 m to 18.30 m above GL |
| 12 | Supply and erection of steel centering, shuttering for soffits and sides including necessary supports and strutting for all RCC works using MS sheets of suitable size of BG10 stiffened with MS angle of size 25 X 25 X 3 mm for boarding laid over I type MS Truss of size 25 X 25 X 3mm about 90cm c/c and supported by 40mm GI pipes (Medium) spaced at 75cm c/c etc complete and as directed by the TWAD Board Officers. |
| 13 | From GL to 3.30m |
| 14 | From 5.30m to 6.30m above GL |
| 15 | From 8.30m to 9.30m above GL |
| 16 | From 11.30m to 12.30m |
| 17 | Square Column Below GL and upto 3.30m above GL |
| 18 | 3.31m to 4.30m ht |
| 19 | 4.31m to 5.30m ht |
| 20 | 5.31m to 6.30m ht |
| 21 | 6.31m to 7.30m ht |
| 22 | 7.31m to 8.30m ht |
| 23 | 8.31m to 9.30m ht |
| 24 | 9.31m to 10.30m ht |
| 25 | 10.31m to 11.30m ht |
| 26 | 11.31m to 12.30m ht |
| 27 | Curved Surface - upto 3.30m ht. 11.30m to 12.30m |
| 28 | 12.30m to 13.30m |
| 29 | 13.30m to 14.30m |
| 30 | 14.30m to 15.30m |
| 31 | Supplying, cutting, bending, tying, fabricating and placing in position of steel rods for all RCC works including cost of steel and binding wire etc.( The steel should conform to the relevant ISspecificationand supplied with test certificateFe. 415 grade as per IS specification No.1786/1985 and as amended from time to time)delivery at site of work including loading, freight, unloading,stacking,transit insurance charges, taxes etc. complete.and as directed by the TWAD Board officers. |
| 32 | Painting two coats with approved cement paint over one priming coat of white cementover cement plastered wall surface and ceiling including cleaning preparing the surface and curing etc., complete (using cement paint of colour as approved by the Departmental officer) and as directed by the TWAD Board officers. |
| 33 | Fabrication, supply, delivery and fixing of outside MS Ladder of 45cmclear wide made out of 50 mm x 50mm x 6mm MS angle for both sides and for steps at 30cm C/C welded jointed etc ., for I staging from GL to 1st level brace (weight 4.5kg/m) IInd and IIIrd staging upto floor slab and IVth staging from floor slab to roof top. Supply, delivery and fixing of 32 mm GI pipes medium for hand rails from I stage to IVth stage. RCC M30 Grade mix for Landing slab 5 nos. at Ground Level- 1No. and above Ground Level - 4Nos. Supply and fixing of 32mm GI pipe medium for hand rails for the Landing slab. Supplying and fixing of MS Base plate of 100mm X 100mm X 6mm thick for fixing Anchore fastener bolt for fixing of hand rails at Landing slab and MS Ladder providing locking arrangements with two coats of approved enamel paint over one coat of red oxide paint as per approved Type Design and as directed by TWAD board officers. |
| 34 | Providing and fixing of RCC inner access ladder in RCC 1:11/2 :3 (one cement,one and half sand and three aggregate) using 20mm HBG stone for OHT including cost of reinforcement, placing grill in position, centring,shuttering charges, mixing concrete,curing etc. to required height and clear width of 45 cm consisting of 2 nos. of vertical post of 10 cm x 15 cm and step slab of 25mm x 25mm etc.complete and as directed by TWAD Board Officers. |
| 35 | Providing 110mm PVC vent cowlarrangementsmosquito proof nylon net and as directed by TWAD Board officers |
| 36 | Supply and fixing of cut stone of size 0.30m x 0.30m x 0.15m in CM 1;3(one cement and three sand) below inlet pipe for Service Reservoir as directed by TWAD Board Officers. |
| 37 | Providing manhole cover of size 0.60 x 0.60M in RCC 1:1.5:3 with suitable reinforcement and 50x50x6mm MS angle fixed along edges and as directed by TWAD Board officers |
| 38 | 65mm GI pipes for inlet connection |
| 39 | 65mm GI pipes for over flow & rain water harvesting pipe |
| 40 | 50mm GI pipes for scour pipe |
| 41 | 65mm GI pipe for delivery pipe |
| 42 | 90mm PVC Threaded coupler |
| 43 | 63mm PVC Threaded coupler |
| 44 | 65mm dia GI Tee |
| 45 | 65mm dia GI bend 90 |
| 46 | 65mm dia GI bend (short) |
| 47 | 65mm GI coupler |
| 48 | 65mm GI union |
| 49 | 65mm GI Elbow |
| 50 | 50mm GI union |
| 51 | 50mm GI Elbow |
| 52 | 65mm GI Tee |
| 53 | 65x50mm GI reducer |
| 54 | 75mmx63mm PVC reducer |
| 55 | 65mm GM gate valve |
| 56 | 50mm GM gate valve |
| 57 | 63 mm PVC 4Ksc Pipe |
| 58 | 63 mm PVC 6Ksc Pipe |
| 59 | Labour charges for GI pipe connection to the OHT, for inlet, outlet, overflowand scour arrangements including cutting and threading, earth work excavation & refilling. |
| 60 | Providing Hand rails over the Roof slab by using 32 mm GI Pipe with 40mm x 6mm MS Flat and fixied with 12mm dia Fastner Bolt 75mm long and as directed by TWAD Bd officers |
| 61 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \"BB\" for all works in this package} |
AI Tender Summary
Tender Timeline
Aug 11, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 17, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender