Tender For Construction Of Compound Wall To Sant Sachhidanand Balyogi Rajeshwar Mauli Trust Premisses At. Pala Tq.Morshi
Tender Value
32.75 Lakhs
Estimated cost
Bid Submission
14 Aug 2023
0 days left
EMD
32500
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
morshi → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Compound Wall To Sant Sachhidanand Balyogi Rajeshwar Mauli Trust Premisses At. Pala Tq.Morshi
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for foundation in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 m. beyond the building area and stacking or spreading as directed,including dewatering,preparing the bed for the foundation and necessary back filling, ramming, watering, including shoring and strutting as necessary complete. Lift 0.00 to 1.5 m |
| 2 | Excavationforfoundationinearth,soilsofalltypes,sand,gravelandsoftmurum,including removing the excavatedmaterial upto a distance of 50 metres beyondthe building areaandstackingand spreadingas directed,dewatering,preparingthebedforthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means |
| 3 | Providing soling using 80 mm size granite / quartzite / gneiss / trap metal in 15 cm. layer including hand packing filling voids with sand / grit, ramming, watering etc complete. |
| 4 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 5 | Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 6 | Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality ArtificialSand |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 8 | Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineer inchargein layers of 15cm. to 20cm.including watering and compaction etc. complete.Spec. No. : Bd.A. 11/Page No. 263 |
| 9 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete |
| 10 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints,watering and scaffolding etc. Complete |
| 11 | Providing andlayingcast in situ/Ready mixed cement concrete M15 of trap/grinite/quartizite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel formwork compacting ,roughing them if special finishing uneven and honeycombed surface and curing etc. complete. The cement morter 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newely laid concrete shall be covered by gunny bag, plastic tarpaulin etc.(wooden centering will not be allowed) ( Spec. no. Bd. E. 3/Pg. No..288 It. No. 24.16 ) |
| 12 | Providing internal cement plaster 20mm thick inSingle coats in cement mortar 1:4without neerufinish,to concrete,bricksurface,inallpositionsincludingscaffoldingandcuringetc.complete.[Spec. No.Bd.L.4 Page Number 368] (It. No.32.07) |
| 13 | Providing patti/ band 100mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete |
| 14 | Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item One Number 15 to 18 prior approval of Superintending Engineer will be necessary |
| 15 | Providing and fixing M.S. grill door 24 Kilogram/ One Square Metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc |
| 16 | Providing and fixing board displaying information,suchas \"Nameofwork,Tendercost,Name of Contractor,Work and liability period etc\",having rectangular shape of 1.20mx0.90m size made out 18 gauge(1.25mm) thick mild steel sheet painted with one coat of Zincchromate stoving primer and two coats of enamel paint on frontside and grey stove enamel on back side and border/messages/symbols etc.with approved colour shade paint complete,on M.S.angle of size35x35x3mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S.angle iron posts of size 65mmx65mmx6mm,3.65m long painted with alternate black and white bands of 25cm widthincludingallfixturesetc.andfixingtheboardsin1:4:8 concreteblockofsize60cmx60cmx75cmincluding, excavation,refilling,transportation,andlabouretccomplete. Spec. No. As directed by Engineer in Charge |
AI Tender Summary
Tender Timeline
Aug 10, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 17, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender