Irrigation And Public Health Department has published Providing Lift Drinking Water Supply Scheme Jaban Bagain In Gp Lower Karsog In Tehsil Karsog, Distt. Mandi Hp (Sh: C/O Rcc Circular Sump Well, Clear Water Tank 30000 Ltrs Capacity, C/O Rcc Circular Main Storage Tank 20000 Ltrs Capacity, C/O Pump House Bel. Submission Date for this Tender is 22-08-2023. Water Tank Tenders in karsog Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Excavation in foundations trenches etc.in all kind of soil in all leads and lifts such as pick work, jumper work in saturated /un saturated soilblasting work andchiseling /wedging out of rockswhere blasting work is prohibited up all depth and lifts including pumping and baling out water where ever requared stacking the excavated earth not more than 3mtrs.clear from the edge of excavation and then returning the stacked soil in 15cm.layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and disposing of all surplus excavated material within all leads and lifts, useful materials available from excavation to be properly stacked and handed over free of cost to the department as per direction of the Engineer-in-Charge |
| 2 | Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate of 40 mm nominal) and curing complete excluding cost of form work including all leads and lifts:Foundation and Plinth. |
| 3 | Providing and laying cement concrete in M30 grade but not leaner than 1:1:2 (1 cement:1 sand:2 graded stone aggregate of 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in: |
| 4 | Foundation and Plinth. |
| 5 | Walls (any thickness) but not less than 0.10 mtrs thick including attached pilasters buttresses plinth and string course from top of foundation upto floor two levels. |
| 6 | Providing and laying cement concrete 1:1 ½ :3(1cement:1 ½ sand:3graded stone aggregate of 20mm nominal size)and curing complete excluding cost of form work and reinforcement for reinforced concrete work in: |
| 7 | iv)Suspended floors, roofs, landings, shelves and their supports balconies, beams, girders, bressumers and cantilivers etc inin all leads an lifts of any shape. |
| 8 | Placing& Laying mild /tor steel reinforcement for RCC. work including bending, binding and placing in position complete up to floor two levelincluding all leads and lifts.: |
| 9 | Providing form work with steel plate 3.15 m.m thick welded with angle iron 30x30x5 m.m so as to give a fair finish including centering ,shuttering, propping etc. height of propping and centering below supporting floor to ceiling upto all heights and removal of the same for in-situ reinforced conc.and plain conc.work in :- |
| 10 | a) Foundation, footings & bases of columns and the like mass concrete with in all leads and lifts complete in all respect. |
| 11 | b) Vertical surfaces such as walls (any thickness)portions and the like including attached pilaster buttresses plinth and string course and the like |
| 12 | c) Flat surfaces such as soffits of suspended floors roofs landings and the like floors etc upto 200 mm in thickness. |
| 13 | (i) Beam cantilever, girders, lintels sides and soffits of beams haunchings cantilevers,Pillar, Padestal bresummers and lintels not ecceeding I mtr in depth |
| 14 | Prov and fixing precast concrete manhole cover & frame confirming to IS-12593-1988 part-I and IS 12592-1991, part - II560 mm dia (Meduim duty) |
| 15 | Laying, jointing and tesnting in trenches, GMS tubes (MG) tube fittings(earth work to be paid separately). |
| 16 | i) Inlets pipe 50 mm dia |
| 17 | ii) Outlets pipe 50 mm dia |
| 18 | iii) Scour pipe65 mm dia |
| 19 | Prov and fixingcaststeel sluicesluice valve ( with hand wheel) complete in all respect and as per the entire satisffcation of Engineer in charge. |
| 20 | i)Supply valve 50 mm dia |
| 21 | ii) Scour Valve 65 mm dia |
| 22 | Manufacturing, Supplying, Fabrication andFixing of MS Fabricated Protection Panel 750 mm x750mm made with MS Angle 40 x40 x4 mm for frame, MS Angle 30x30 x3 mm forcover. MS Flat 25 x5mm for fixingof sliding door bolt and MS Sheet( 12gauge) 2.50 mm thick for protection of manhole covers of storage tanks including the cost of cuttingand welding of MS angle & in RCC slab, by drilling holes in MSangle & in RCC slab, provision for providingand fixingslidingdoor bolt 300 x16mm MS Handle 100 mm, Lock and applying a coat ofred lead paint & painting twocoat withsteel paint ( Firoza Blue)complete job in all respect in allleads andlifts and to theentire satisfaction of the Engineer-in Charge. |
| 23 | Providing and laying cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate of 40 mm nominal) and curing complete excluding cost of form work including all leads and lifts:Foundation and Plinth. |
| 24 | Random Rubble masonry /polygonal rubble masonary (un-coursed /brought to courses ) with hard stone of approvedquality in foundation and plinth including leveling up with cement concrete 1:6:12(1cement: 6sand: 12graded stone agg.20mm nominal size) in plinth level in cement mortor 1:6 (1 cement : 6 sand). |
| 25 | Brick work usingcommon butnt clay building bricks insuper structurein cement mortorI :6( I cement 6 sand ) |
| 26 | Providing and fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges, jump lock jamb, beed and if required angle threshold of mild steel angle of section 50X25 mm or base ties of 1.25 mm pressed mild steel welded or regidly fixed together by mechanical means, adjustable lugs with split and tails to each jamb including steel but things 2.5 mm thick with gaurds, lock strike plate and shock as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by Engineer-in-charge. |
| 27 | Providing and fixing panelled glazed or panelled and glazed shutters for doors windows & clearestory windows i/c black enamelled iron butt hinges with necessary screws: 40 mm thick 2nd class deodar woodwith in all lead and lift . |
| 28 | Providing & laying cement concrete 1:2:4 (1 cement2 sand 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of from work and reinforcement in |
| 29 | Foundation, footing & bases of columns and the the like mass concrete with in all leads and lifts complete in all respect. |
| 30 | Suspended floors, roofs, landings, shelves and their supports balconies, beams girders bressumers and cantileversetc in all leads and lifts of any shape. |
| 31 | Half brick masonry in common burnt clay building bricks in : cement mortar 1:4 (1 cement : 4 sand). |
| 32 | Pointing on Brick work with cement mortar 1:3 (1cement : 3 sand) raised and cut.with in all lead and lift . |
| 33 | Providing and laying brick tiles over mumty roofs grouted with cement mortar 1:3 ( 1 cement,3 sand ) over a 12 mm layer ofC.M 1:3 ( 1 cement, 3 sand ) and finished neat with in all leads and lifts complete in all respect. |
| 34 | 6 mm cement plaster to ceiling in CM 1:3 ( 1Cement :3 Sand) |
| 35 | 15 mm cement plaster in single coat on the rough side of Brick/stone/ concrete wallfor interior plastering up to floor two level i/c arises, internal rounded angles, chamfers and/or rounded anglesnot exceeding 80 mm in girth and finished even and smooth in c:m 1:6 (1 cement : 6 sand).with in all lead and lift . |
| 36 | 20 mm thick cement plaster in single coat on rough side of brick/stone/concrete walls for interior plastering up to floor -2 level including arrisses,internal rounded angles,chamfers and or rounded angles not exceeding 80 mm in girth and finished even and smooth with in all leads and lifts in C.M 1:6 ( 1 cement : 6 sand ) |
| 37 | Providing & fixing M.S. grills of required pattern in wooden frame of window etc.with M.S. flats, square or round barswith round headedbolts and nuts by screws plain grills. |
| 38 | Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of IS gauge specification 8 S.Gwith wire of dia 0.56 mm for doors,windows i/c bright finished black enamelled iron butt hinges with necessary screws 30 mm thick of 2nd class deodar wood with in all leads and lifts complete in all respect. |
| 39 | Providing plinth protection 50 mm thick in cement concrete 1:3:6 ( 1 cement, 3 sand,6 graded stone aggregate 20 mm nominal size ) with in all leads and lifts complete in all respect. |
| 40 | Constructing coursed rubble hammer dressed "U" shape open surface drain with side wall 15 X 22 cm in cementy mortar 1:6 ( 1 cement, 6 sand ) and inside plastering with cement mortar 1:3 ( 1 cement, 3 sand ) i/c earth work and laying 10 cms cement concrete in 1:5;10 ( 1 cement,5 sand,10 graded stone aggregate 40 mm nominal size ) and 7.5 cms cement concrete 1:2:4 ( 1 cement,2 sand,4 graded stone aggregate 20 mm nominal size ) and finished with a floating coat of neat cement complete as per standard design with in all leads and lifts complete in all respect. |
| 41 | Applying Birla whire wall care putty over plaster surface after throughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to thesurface complete. |
| 42 | Distempering with dry distemper of approved brand and manufacture (two coats) and of required shade on undecorated wall surfaces to give an even shade sand papered smooth. |
| 43 | Providing and fixing anodised MS sliding door boltswith bolts and nuts screws etc. complete. |
| 44 | 300 *16 mm |
| 45 | Providing and fixing anodised MS towerbolts ( barrel type)with screws etc. complete. |
| 46 | 250 * 10 mm |
| 47 | 150 * 10 mm |
| 48 | Providing ad fixing anodised MShandleswithnecessary screws etc. complete. |
| 49 | 100 mm |
| 50 | 125 mm |
| 51 | Applying priming coat on new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,greese,dirt and other foreign matters,sand papering and knotting.Ready mixed paint brushing wood primer pink. |
| 52 | Painting two coats (excluding priming coat) on new wood and wood based surfaces,with enamel paintto give an even shade including cleaningthe surface of dirt ,dust and other foreign matters sand papering and stopping with enamel paint other than white |
| 53 | Prov and fixing 12 mm thick industrial tiles proof stain and impact resistant heavy duty 450x450x12mm manufactured of approved shade and colour in flooring treads of steps and landings laid over 12 mm thick cement mortor 1:3 ( 1 cement : 3 sand ) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. |
| 54 | Supply and fixing of cast iron manhole cover with frame 455 x 610 mm rectangular CI cover ( light duty) single seal pattren the weight of cover 23 kg and weight of frame 15 kg. The total weight of cover and frame to be not less than 38 kg complete. |
| 55 | White glazed tiles 6 mm thick in flooring cement mortar 1:3 ( 1 cement : 3 sand) finished with flush pointing in white cement. |
| 56 | White glazed tiles 6 mm thick in skirting risers of stepes and dado 12 mm thick cement mortar r 1:3 ( 1 cement : 3 sand) and jointed with cement slurry. |
| 57 | Providing and fixing automatic flushing cistern with a pair of CI or MS bracket complete with fitting including CI Syphonic apprature masquits proof lid, CP brass unions and coupling for connecting with inlet outlet and over flow pipes including cutting holes and making goodthe same Over flow pipe to be measured and paid for seperately (Viterous china 5 liters capacity |
| 58 | Providing and fixing vitreous china wash down water closet (Indian Type, W.C pan) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1 : 1 ( 1 cement 1 sand) ( Seat and cover to be measured and paid for separately) (White colour) |
| 59 | Providing and fixing 100 mm size P or S trap for water closet ( Squatting Pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1 ( 1cement : 1 sand) Sand cast iron |
| 60 | Providing & fixing viterious china wash basin with single hole for pillar tap with CI or MS bracket painted white including cutting hole including good the same excluding fittingCera sanitary work (cornet) white 550x400white |
| 61 | Providing and fixing viterious china padestral for wash basin complete recessed at the basic for reception of pipe and fittings Cera sanitary work (carnet) white (Viterious China in White Colour) |
| 62 | Providing and Fixing of water storage tank sintex having of capacity 500 liters with necessary fittings including over flow pipes, scour pipes etc. inlet and outlet and inside paint of required size for inlet or outlet and inside paint of approved quality complete including hoisting complete in all respects. |
| 63 | Providing and fixing on wall face PVC(D - Plast) rain water pipes of working pressure not less 4.5 Kg/Sqcm including fitting the joints with approved adhesive complete with in all leads , lifts and carriage of materials.110 mm nominal bore. |
| 64 | Providing and fixing on wall faces PVC door bend (D-Plast) with oval access door, insertion rubber washer 3 mm thick bolts and nutsISI marked complete including fixing withapproved adhesive complete.75 mm nominal bore. |
| 65 | Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fittings and clamp including making good the wall ceiling and floor in all leads and lifts.) 15 mm nominal bore |
| 66 | Providing and fixing full way wheel valve 15 mm dia Gun metal. |
| 67 | Providing and fixing cast iron spun soil waste and ventilating pipe lead caulked joint to be measured and paid for separately 100mm dia with C.I cowl 100 mm dia nominal size. |
| 68 | Providing and fixing brass bib tap (superior qualityor heavy type) 15 mm dia. |
| 69 | Providing & Fixing CP Brass Soap Dish with CP breckets fixed to wodden plugs with CP brass screws complete in all respect in all leads and lifts. |
| 70 | Wiring for light point / fanpoint /exhaust fan /call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable inPVC casing & capping and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. |
| 71 | Group C. |
| 72 | Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. |
| 73 | i) 2x1.50 Sq. mm. |
| 74 | ii) 2x4.00 Sq. mm. |
| 75 | (a) Supplying and fixing 3 pin 5/6 amps. Socket outlet on the exists switch box/covers including connections etc. as required. |
| 76 | (b) Supplying and fixing 2 way 5/6 amps. Tumbler/piano type switch on the existing switch box on the switch box/cover including connections etc. as required. |
| 77 | (a) Supplying and fixing 3 pin 15/16 amps. Socket outlet on the exists switch box/covers including connections etc. as required. |
| 78 | (b) Supplying and fixing 15/16 amps. Tumbler/piano type switch on the existing switch box on the switch box/cover including connections etc. as required. |
| 79 | Supplying and fixing wooden box of following size (nominal) on surface or recess with suitable size of phenolic laminated sheet cover of in front as required. |
| 80 | (a) 229 mm.x 102 mm.x 60 mm. deep |
| 81 | (b) 203 mm.x152 mm.x 60 mm. deep |
| 82 | Providing and Supplying CFL 1 x 23 watt of reputed make in all leads and lifts. |
| 83 | Providing and Supplying of CFL 1 x 5 watt in all of reputed make in leads and lifts. |
| 84 | Supplying and Fixing 5 Amps to 32 Amps rating, 240 Volts, Lseries miniature circuit breaker of following poles in the existingMCBDB complete with connections, testing and commissioning etc. as required Cat - A. (Single Pole) |
| 85 | Supplying and fixing ceiling rose on existing junction box/ wooden block including connections etc. as required. |
| 86 | Supplying and fixing plain pandent with 16/20 mm twin twisted, flexible PVC insulated copper cable andbackelite pendant holder including connections, etc. as required. |
| 87 | Supplying and Fixing of followingway, single pole and neutral, sheet steel, MCB distribution board, 240 Volts on surface/ recess, complete with tinned copper busbar, netural link, earthbar, dibnbar, detachable gland plates, inter connections, i/c painting, earthing etc. as required busbar 8 way. |
| 88 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (63 amp. CAT - A) |
| 89 | Providing, installing, testing and commissioning of ceiling fan and regulator i/c wiringthe down rod of standard length (upto 30 Cm with 1.5 Sqmm PVC insulated copper conductor signle core cable etc. as required.Ceiling fan 1400 mm sweep category A |
| 90 | Providing and fixing ultra slim decorative extruded box fixture with domestic electronic ballast, snap-on installers, suitable for 28 watt FTL (T5), complete with all accessories (including one No. T-5 Tube), connections, testing and commissioning etc. as required.1 x28 watt-FTL(T5) (Category-A) |
| 91 | Providing and Fixing LED Flood Lightwatt mentioned below (OREVA make) complete in all respect in all leads and lifts. |
| 92 | Prov and fixing two core service wire 6 Sqmm thick. |
| 93 | Errection of all equipments from S.No. 1 to 4, 6 & 8i/c cost of tees, bends tapers & anyother fittings required as per site conditions& as per directions of Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
