|
| 1 | M.S counter head bolt 3/8”x 2 ½” |
| 2 | M.S counter head bolt 3/8”x 3” |
| 3 | D-link chain pitch- 66mm |
| 4 | D-link chain pitch- 75 mm |
| 5 | Sprocket ID-55mm, OD-140 mm. Teeth-14 |
| 6 | M.S idler length- 29 ½”, OD-3” |
| 7 | M.S idler length- 27 ½”, OD-3” |
| 8 | MS plate for conveyor chain (as per sample) |
| 9 | Machine screw 1 ¼”x ¼” |
| 10 | Wooden strips ( bakla wood)2”x2”x 26” |
| 11 | M.S Plate for stocker with wheels ( complete) 2 “x 26” |
| 12 | Spares for batch type C/F M/C ( Thyssen krupp) type KB1250 C (i) Plough Helper( with seal kit) |
| 13 | Spares for batch type C/F M/C ( Thyssen krupp) type KB1250 C(ii) Plough cylinder ( with seal kit) |
| 14 | Spares for batch type C/F M/C ( Thyssen krupp) type KB1250 C(iii) Bottom cylinder ( with seal kit) |
| 15 | Spares for batch type C/F M/C ( Thyssen krupp) type KB1250 C (iv) Buffer |
| 16 | Spares for C/f M/C batch type V-1500/V1750 (i) Plough set ( complete) with seal kit set |
| 17 | Brake liner width- 1feet |
| 18 | Plough scrapper |
| 19 | Plough helper |
| 20 | Plough cylinder with seal kit |
| 21 | Flange type gun metal valve 1” |
| 22 | Air filter ½”( with glass) |
| 23 | Spares for C/f M/C batch type V 1500/V1750 (i) Molasses seperator ( complete) 8” |
| 24 | Piston cylinder for glass ( complete ) with seal kit set |
| 25 | Butterfly valve 12\" |
| 26 | Rubber for butterfly valve 300 mm |
| 27 | Rubber for butterfly valve 200 mm |
| 28 | Spares for C/f M/C ( walchand nagar) batch type V 1500/V1750 (i) Coupling set |
| 29 | Oil seal as per sample |
| 30 | Buffer |
| 31 | Solenoid valve ( single) |
| 32 | Solenoid vlave ( Double) |
| 33 | Control valve as per sample |
| 34 | Oil seal 225 x 300 x 37 Make- My-Koda |
| 35 | Oil seal 40 x 55 x 7 Make- My-Koda |
| 36 | Flexible transparent pipe (1”) |
| 37 | M.S Bolt 12 x 50 |
| 38 | SS allenkey bolt12 x 50 |
| 39 | SS alenkey bolt 12 x 35 |
| 40 | Flexible pipe with nut 3/8”x 5ft long |
| 41 | SS bolt 8 x 20 |
| 42 | V-Belt HPC 4500 |
| 43 | V-Belt B-62 Make- Fenner |
| 44 | V-Belt B-67 Make- fenner |
| 45 | MS pipe 1” C class Make- Tata/Jindal |
| 46 | MS pipe 3/4” C class Make- Tata/Jindal |
| 47 | Oil seal 20 x 30 x 7 |
| 48 | Sprocket (As per sample) |
| 49 | Lubrication pump for continuous C/F machine capacity- 1 LPM, Pressure- 2 kg/cm2, size- ¼”x ¼” Make- Flowtech |
