|
| 1 | Dismantling structural steel work including doors, gates but excluding frame trusses etc complete all as directed. |
| 2 | S & F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, door chowkats of angle or other section and similar works or portion ordered to be hunged as gates etc including ornamental/ intricate work / design complete of Grade Fe-290 Grade-E-165 including welding etc complete all as specified and as directed. |
| 3 | M & L preparation of new or previously untreated surfaces of steel of any description over 10cm widthor girth not otherwise described and applying two coats of synthetic enamel paint over a coatof a red oxide zinc primer complete all as specified and as directed. |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed. |
| 5 | Demolition of cement concrete (unreinforced) in of any description and in any position not otherwise specifically provided complete and removing debris outside of defence land complete all as directed. |
| 6 | M & L for 100mm thick cement concrete type D-2 ,1:4:8 using 40mm graded stone aggregate as leveling course / sub base complete all as specified and as directed. |
| 7 | M & L for 50mm thick cement concrete type B-1 ,1:2:4 using 20mm graded stone aggregate as leveling course complete all as specified and as directed. |
| 8 | M & L for 25mm thick cement concrete type B-1 ,1:2:4 using 20mm graded stone aggregate as leveling course complete all as specified and as directed. |
| 9 | Material and labour Virified Ceramic tiles (square / rectangular) polished of size 600mm x 600mm x 10mm thick in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over & including 15mm thick screed bed in CM (1:6) etcto match the tiles all as specified and as directed. |
| 10 | All as per item No 9 above but as in skirting / vertical surfaces over 10mm thick baking coat of CM 1:4 complete all as specified and as directed. |
| 11 | Material and labour for Non skid coloured ceramic tiles of size600mm x 600mm x 10mm thick (Square / rectangular) over & including 15mm thick screed bed in CM 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tilesall as specified and as directed. |
| 12 | Material and labour for Non skid coloured ceramic tiles of size300mm x 300mm x 7 to 8mm thick (Square / rectangular) over & including 15mm thick screed bed in CM 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles all as specified and as directed. |
| 13 | M & L for coloured glazed ceramic tiles of size 450 x 300 x 7 to 8mm thick as in vertical surface setand jointed in neat cement slurry andpointed flush in white cement with pigmentover and including 10mm thick baking coat of CM 1:4 complete all as specified and as directed. |
| 14 | M & L for rubber moulded glossy finish machine pressed precast concrete interlocking paver block of selected colour any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade fixed with grey cement and no pigment withincluding 25mm thick sand coushioningcomplete all as specified and directed. |
| 15 | M & L for industrial grade 600mm x 600mm x 10mm thick tiles of jonson Endura or equivalent grade,set,jointed and pointed in neat cement slurry asin floors over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 16 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid in any mortar etc and removing debris outside of defence land complete all as directed. |
| 17 | M & L 20mm thick granite (of any type) work table rubbed and polished in steps, jambs, pillars, window cills, cooking platforms, floor / skirting / risers or as in vertical support or counter top for wash basinand like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite over and including 15 mm thick screed layer in CM 1:3 with edges polished / rounded as ordered incuding cutting circular or eliptical hole in granite slab and fixing in position complete and ensure best adhesion to surface completeallas specified and as directed. |
| 18 | M & L 20-25mm thick machine cut cudappah stone slabfor vertical supports of kitchen platforms and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing of the exposed face complete allas specified and as directed. |
| 19 | M & L for 20 to 25mm thick machine cutKota stone of size 400 x 550mm (minimum) as in flooring laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and mirror polishingover and including 15mm thick screed bed in CM 1:6 complete all as specified and directed . |
| 20 | All as per item No 19 above but in riser of steps, skirting , dado and pillar over and including 10mm thick backing coat in cement mortar 1:3 andjointed complete complete all as specified and directed . |
| 21 | M & L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) grade D-5 and setting in CM 1:6 including dismantling of brick or stone / boulders masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and directed. |
| 22 | Taking down cement or cement lime plaster of any description on bricks or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as directed. |
| 23 | M & L for rendering 10mm thick in cement mortar 1:6 on brick / concrete surfaces finished even & smooth with smooth with a thin layer of sagol finish in patches works complete all as specified and directed. |
| 24 | M & L for rendering 15mm thick CM 1:4on brick / concrete surfaces finished the surfaces with sponge finish in patches works complete all as specified and directed. |
| 25 | M & L preparation of newly plastered surfaces of walls of any description and applying two coats of oil bound distemper over a coat primer over and including 2mm thick wall care putty complete all as specified and directed. |
| 26 | M & L preparation of newly plastered or unplastered surfaces of wall and applying three coats of white wash complete all as specified and directed. |
| 27 | M & L preparation of newly plastered or unplastered surfaces of wall and applying three coats of cement base paint over a coat of primer complete all as specified and directed. |
| 28 | S & F in repairs 18/19mm thick prelaminated particles board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work complete as in shutte r/ shelves of cup boards complete and edges leeped with 6m thick teak wood lipping strips with nails etc complete all as specified and directed. |
| 29 | Supply and fix in repairs sinks with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 30 | S & F in repairs vitreous china squatting pan \"ORISSA\" pattern size 580mm x 440 mm, white with integral foot rest including cast iron \"P\" or \"S\" trap andconnection to trap (but excluding flushing cistern and flush pipe) includintg cement concrete bedding if required and including making good to floor complete all as specified and directed. |
| 31 | S & F in repair vitreous China wash down water closet (pedestal pattern), white with including cast iron \"P\" or \"S\" trap andconnection to trap , fixing bolts,seat cover and jet spray etc (excludingflushing cistern and flush pipe) complete connected to drain and including making good to floor, complete all as specified and directed. |
| 32 | Supply and Fix in repairs vitreous chinawhite Wash hand basin flat back, size 550 x 400mm white excluding pillar taps & waste pipe but including Waste coupling chromium platedand fixing brackets completeall as specified and directed. |
| 33 | Supply and fixing in repair 600mm x 450mm bevelled edge mirror of 5.5mm thick selected quality glass,mounted on plastic frame covered back with commercial and fixed on wooden plug with chromium plated brass screws and cup washer complete all as specified. |
| 34 | S & F in repairs 15mm bore dia bib taps, cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 35 | S & F in repairs 15mm angle cock , fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for unioncomplete all as specified and directed. |
| 36 | S & F in repairs 15mm stop valve , Long shank concealed type, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for unioncomplete all as specified and directed. |
| 37 | S & F in repair 125mm size brass chromium plated shower rose with or without swivel joints, fitted to steel pipe or union complete all as specified and directed. |
| 38 | S & F in repairs 15mm dia PVC connections with PTMT nuts , length 450mm all as specified and directed. |
| 39 | Supply and fix in repairs 15mm bore dia pillar taps of cast copper with capstan head chromium plated, fancy type, screwed down high pressure with or without lettered \"hot\" and \"cold\" with long screwed shank and fly nut for iron pipe complete all as specified and directed. |
| 40 | S & F in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed. |
| 41 | Supply and fix in repairs Vitreous Chinaurinal, half stall type, white of size of 465 x 355 x 265mm (minimum), with fixing accessories , fixing plugs, grating and union (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) fixed to walls and connect complete all as specified and directed. |
| 42 | S & F in repair Stainless steel plate rack of size not less than 900 x 900 mm made out of sheet grade SS-304 thickness not less than 0.63mm approved quality finishcomplete all as specified and directed . |
| 43 | M & L for GI tubing 15mm bore dia medium grade including all fittings such as bend, elbow, union, tee, short pieces etcfixed to walls, ceilings or laid in floors including taking up or down old steel water tubing and connections completeall as all as specified and directed. |
| 44 | M & L for GI tubing 20mm bore dia medium grade including all fittings such as bend, elbow, union, tee, short pieces etcfixed to walls, ceilings or laid in floors including taking up or down old steel water tubing and connections complete all as specified and directed. |
| 45 | Demolition and breaking up 110mm bore dia drain pipes (Salt glazed ware or AC or RCC or PVC SWR) set in cement mortar and removing debris from the site complete all as directed. |
| 46 | S & F 110mm bore dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors / fixed to wallscomplete all as specified and directed. |
| 47 | S & F 75mm bore dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors / fixed to wallscomplete all as specified and directed. |
| 48 | S & F 110mm bore dia PVC (SWR) with oval access door of any radius diminishing pieces or tapers (larger bore measured) complete all as specified and directed. |
| 49 | S & F 75mm bore dia PVC (SWR) with oval access door of any radius diminishing pieces or tapers (larger bore measured) complete all as specified and directed. |
| 50 | S & F 110mm bore dia PVC (SWR) bends of any radius complete all as specified and directed. |
| 51 | S & F 75mm bore dia PVC (SWR) bends of any radius completeall as specified and directed. |
| 52 | S & F 75mm bore dia PVC (SWR) Nahani trapwith SS gratting with or without holes including jointing to waste pipes and fixed in cement concrete type B-1 , 1:2:4, complete all as specified and directed. |
| 53 | S & F PVC (SWR) gully trap of size 150 x 100mm square or round mounted , type \"P\" including jointing to waste pipe andfixed in cement concrete type B-1 , 1:2:4 complete all as specified and directed. |
| 54 | S & F 110mm bore dia PVC (SWR) vent cowl complete all as directed and specified. |
| 55 | S & F 75mm bore dia PVC (SWR) vent cowl complete all as directed and specified. |
| 56 | S & F 75mm bore dia PVC (SWR) junction, double (double \"T\")equal or unequal with door access complete all as specified and as directed. |
| 57 | S & F 110mm bore dia PVC (SWR) coupler complete all as directed and specified. |
| 58 | S & F 75mm bore dia PVC (SWR) coupler complete all as directed and specified. |
| 59 | Supply and fix vertical venetion blinds of selected colour / shade, 100mm louver width, quality of approved make, fabric made of 100% polyster woven fabric of thickness 0.4mm with acrylic coating of resistance to cracking / fraying & treated for dust repellency, vertually maintenance free having plastic bottom chain thickness of 0.50mm and dia 3mm plastic with metal bottom of section 116.2 mm x 48.30mm and suitable coating on exterior including all fixtures and fitting complete in all respect as design / colour / shade including requisite installation brackets etc as required for installation at site with anchoring arrangement including taking down old unserviceable blind complete all as specified and as directed. |