|
| 1 | Relaying/ replacementof one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation and refilling the trench etc. as required, but excluding sand cushioning and protective covering. |
| 2 | (a) Upto 35 sqmm |
| 3 | (b) Above 35 sq. mm and upto 95 sq. mm |
| 4 | (c) Above 95 sq. mm and upto 185 sq. mm |
| 5 | Relaying/ replacementof one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation and refilling the trench etc. as required, but excluding sand cushioning and protective covering. |
| 6 | (a) Upto 35 sqmm |
| 7 | (b) Above 35 sqmm and upto 95 sqmm |
| 8 | (c) Above 95 sq. mm and upto 185 sq. mm |
| 9 | Relaying /repacement of one number PVC insulated and PVC sheathed /XLPE power cable of 1.1 kv grade of following size in the existing RCC/HUME /METAL pipe as required. |
| 10 | (a) Upto 35 sqmm |
| 11 | (b) Above 35 sqmm and upto 95 sqmm |
| 12 | (c) Above 95 sq. mm and upto 185 sq. mm |
| 13 | Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. |
| 14 | (a) 3.5 x 35 sq.mm |
| 15 | (b) 3.5 x 50 sq.mm |
| 16 | (c) 3.5 x 120 sq.mm |
| 17 | (d) 3.5 x 185 sq.mm |
| 18 | Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required. |
| 19 | (i) Above 6.5 metre and upto 8.0 metre |
| 20 | Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20 mm X 60 cm ), 7/ 4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required. |
| 21 | Supplying anderection of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts , hook and washer etc including drilling of holes for insulator pinsand making arrangements for hanging of Aerial bunched cable etc (as per drawing)and painting with primer and finished paint as required |
| 22 | Supplying of 7 mtr PCC pole, rectangular shape, customized design, compressive strength M42, working load 200 Kg and minimum tensile strength 1715 N/sqmm. |
| 23 | Supplying and making straight through joint with cotton friction tape/ insulated tape/Kacchha Rubber tapeincluding ferrulesfor following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. |
| 24 | (a) 3.5 x 35 sq.mm |
| 25 | (b) 3.5 x 50 sq.mm |
| 26 | (c) 3.5 x 120 sq.mm |
| 27 | (d) 3.5 x 185 sq.mm |
| 28 | S/ITC of outdoor type feeder piller, double door made out of 2 mm CRCA sheet duly primed & painted with synthetic enamel gray paint of size 600 mm(height) x 700 mm (width) x 300 mm deep including P & F of internal connection with suitable size lugs, following accessories & angle iron frame of size 700 mm x 300 mm with 900 mm long legs made out of 40 mm x 40 mm x 5 mm thick angle & grouting the same in suitable cement concrete foundation, arrangement for incoming & outgoing cables, cable termination, earthing, locking, interconnection etc. as required. (a) 125 A , 4 pole, 415 V,50Hz open execution FN TPN switch . Make L&T = 2 Nos |
| 29 | S/ITC of outdoor type feeder piller, Single door made out of 18 SWG CRCA sheet of size 500mm x 450 mm x 300 mm deep having 200 amps, 04 nos insulated aluminium bus bars and to accommodate following accessories, front door openable & angle iron frame of size 300 mm x 450 mm with 600 mm long legs made out of 40 mm x 40 mm x 5 mm thick angle & grouting the same in suitable cement concrete foundation, arrangement for incoming / outgoing cabling / cable termination, earthing, locking, interconnection with danger plate at the outer facing surface of Joint/inspection box etc. as required. |
| 30 | Supplying and laying of 1.1 KV H4 grade aluminium conductor XLPE insulated Aerial Bunched Cables, heat treated, stranded and compact shape with insulated messenger as per IS: 14255/1995 with latest ammendmant on the existing 7 mtrs RCC/PCC poles. (a) 3C x 95 Sqmm+1C x70 Sqmm |
| 31 | Supplying and making end termination with aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 32 | (a) 3.5 x 35 sqmm. |
| 33 | (b) 3.5 x 50 sqmm. |
| 34 | (c) 3.5 x 95 sqmm. |
| 35 | (d) 3.5 x 120 sqmm. |
| 36 | (e) 3.5 x 185 sqmm. |
| 37 | Add 1% Labour Cess on total |
