Tata Memorial Centre has published Tender For Execution Of Civil Works In Engineering Department Including Supply And Fixing Of Office Furniture And Aluminum Partition Works At Service Block Of Hbch Rc Mullanpur Dist Mohali Punjab 140901. Submission Date for this Tender is 17-08-2023. Civil Work Tenders in S.A.S Nagar Punjab. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Half brick Masonry work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level preferably at ground floor and exceptionally if required up to 6th floor at all height , including providing and placing in position 2 Nos 8 mm dia. Reinforcement. bars at every third course of half brick masonry work complete surface preparation i.e tile cutting, existing plaster wall chiseling, Curing, scaffolding if requiredetccomplete specific locations in all respectas per direction of Engineer in Charge. |
| 2 | CEMENT PLASTER (IN COARSE SAND) : 12 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand), including surface preparation i.e Concrete surface hacking, Curing, scaffolding, Providing and Fixing Chicken mess if requiredetc.complete in all respect at specific locations as per direction of Engineer in Charge. |
| 3 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth , sand papering , scaffolding if required etc . complete in all respect at specific locations as per direction of Engineer in Charge. |
| 4 | White washing with lime to give an even shade : New work (three or more coats) on plaster work above false ceiling and slab bottom including site preparation,scaffolding if required etc.complete in all respect at specific locations as per direction of Engineer in Charge. |
| 5 | Providing & applying Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:- Two or more coats on new work approved make First quality Asian Paints (Apcolite) / Nerolac / Dulux including 02 priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. Complete in all respect includinng filling undulations,preparation of surface even and smooth, sand papering etc. at specific locations as per direction of Engineer in Charge. |
| 6 | VITRIFIED TILES Providing and laying vitrified floor tiles / wall tile (Glazed vitrified floor tiles Matt/Antiskid/polished) in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. Complete in all respect at specific locations as per direction of Engineer in Charge. Size of Tile 300x300 mm for wall and Floor |
| 7 | GRANITE COUNTER: Providing and making the RCC counter with granite top, thickness of slab 60mm and having counter depth 750mm along the wall including concreting M20 Mix (1:1.5.3), reinforcement of10mm dia 200mm c/c both direction, reinforcement steel should be embedded in wall bychiseling as per site condition including centering and shuttering etc. , P/F of 115mm brick work for support to the RCC counter at interval of minmum 1.5 m distance wherever required including plastering, putty and paint finishing etc complete . Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, including rubbing, curing ,moulding and polishing the edges to give high gloss finish etc. complete at all levels. Granite colour shall be chocolate brouwn or as per direction of EIC. |
| 8 | GRANITE PARTITION :Providing and fixing 750 mm high,and of 18 mm thick granite stone 50 mm deep in wall, slab table rubbed, edges rounded and both side polished/finished , fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) finished smooth. Color ofGranite Stoneshall be as per BOQ Item No 7 above. Complete in all respect at specific locations as per direction of Engineer in Charge. |
| 9 | FALSE CEILING : Providing and fixing With 15 mmthick Tegular edged light weight calcium sliciate false ceiling tiles at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per existing false ceilingfixed at site , to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to formgrid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mmlong dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50 mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc complete. The workshall be carried out as per specifications, drawing and complete in all respect at specific locations as per direction of Engineer in Charge. Make : Hilux,Unimet,Hunter Douglas, Armstrong |
| 10 | Providing and fixing Making new Gypsum board false ceiling with frame work ( gypsum board of 12mmin true Line and level) joints filled with plaster of Paris/putty finished smooth including cost of all other material (hardware) Labour etc including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc but excluding painting. Item shall be complete in all respect at specific locations as per direction of Engineer in Charge. |
| 11 | METAL FALSE CEILING:-Providing and fixing of GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. False ceiling tiles shall bein true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc, main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. Complete in all respect at specific locations as per direction of Engineer in Charge.Make : Hilux, New edge, Armstrong |
| 12 | ALUMINIUM PARTITION: Providing and fixing 50-60 micron Powder coated alumimium partitionto the required height partly glazed and partly panneled or fully glazed or fully panneled using aluminium section of approved make heavy quality section 3" x 1½ " / or as approved by EIC. The Aluminium section shall be electro statically polyester powder coated/ Satin finish anodizing of approved shade/ colour for bottom, top, middle and vertical rails at required intervals panneling with 12mm thick Nova pan or Ancholam both side pre-laminatd board /glass fixed with sloping aluminium biding around with neoprine gasket glazing with 5.5mm forsted/plain glass of approved make like M/s.Triveni, Shri.Vallabh/J/A/G pilkinten fixed with alumimium channel beeding two way PVC lining/ rubber gasket to ensure water tightness and no rattaling including providing necessary cover mould using suitable alumimium section so as to take care of gaps between the walls/ ceiling / flooring and partitions etc. including providing and fixing necessary fittings as specified and directed. Complete in all respect at specific locations as per direction of Engineer in Charge. |
| 13 | ALUMINIUM DOOR : Providing fixing door frame and shutter side hung to consist of partly glazed partly panneled with 5.5mm thick glass sheet of approved make and quality plain or frosted of bajri glass of approved make like M/s. Triveni/Shri Vallabhj/J//A/G pilkinten fixed with two way PVC lining/rubber gasket to ensure water tightness and no rattaling and panneling with 12mm thick nova pan or Ancholam finished on both side using extruded alumimium section forshutter frame Aluminium partitian section willbe50-60 micron Powder coated ,14 guage 100*40mm aluminium section satin finish anodized including P/F push-pull plates handles and of approved make and heavy duty fittings like tower bolts of Archies/Everite make, Mortice lock of Laxmi/Gold locks with keys , hinges of 5 inch or 6 inchas per requirement hydraulic door closer of Henco/Hyper/Everite make of suitable capacity etc.complete as specified and directed. Item shall be complete in all respect at specific locations as per direction of Engineer in Charge. |
| 14 | FRP DOOR : Providing FRP doorshutter of 30 mm thick including door frame andfitting of approved make of quality brass/SS such as hinges , tower bolts, locking arrangement with screw etc. as Specified & directed by EIC. Size of clear doorshutter (650mm x 2100mm). The door frame shall be 18 mm thick one side finished granite of approved shade and colour including groove making for door and making holes for hinges or other as per requirements and fixed up to 150 mm on wall . Complete in all respect at specific locations as per direction of Engineer in Charge. |
| 15 | CPVC PIPE:Providing and fixing of 20 mm nominal dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of Concealed work of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 16 | CPVC PIPE: Providing and fixing of 25 mm nominal dia PipesChlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints . Internal work - Exposed on wall .Complete in all respect at specific locations as per direction of Engineer in Charge. |
| 17 | P.V.C. PIPES : Drain Line - Providing, laying, jointing, fitting testing heavy quality PVC pipes of Prince, Supreme, Kissan etc. make & of required dia including all fittings required as per site requirement & laying the same at any floor levels including scaffolding all jointing materials & clampingin wooden blocks if required etc. Complete in all respect at specific locations as per direction of Engineer in Charge. |
| 18 | P/F of 75 mm dia pipe |
| 19 | P/F of 110mm dia pipe |
| 20 | E.W.C.: Providing and fixing of Floor mounted EWC Universal(white colour) european water closet wash down pattern best Indian makein white glazed vitreous ofHindware/Parry ware/cerawith integral‘P’ or ‘S’ trap as per approved make with left or right vent in position including fixing it on chair bracket or wall bracketwith necessary C.P. brass screws & plugs etc. complete all as directed by the engineer in charge. Item shall be complete in all respect at specific locations as per direction of Engineer in Charge. |
| 21 | E.W.C. SEAT COVER :Providing & fixing approved quality & make solid plastic seat of approved colour with C.P. brass pillar hinges etc. complete all as directed by the engineer in charge.Hindware/ Parrywareseat cover standard solid type for European water closet. (White colour), Item shall complete in all respect at specific locations as per direction of Engineer in Charge. |
| 22 | FLUSH TANK :Providing & fixing approved quality 10 ltrs Capacity plastic flushing cistern with all internal fittings pull chain etc. mounted on brackets and connecting to the existing supply complete & outlet connection. Low / high level plastic cistern make of champion/ Hindware/ parryware(White Colour) , Item shall complete in all respect at specific locations as per direction of Engineer in Charge. |
| 23 | WASH BASIN : Providing & fixing white glazed vitreous china ware wash basin of approved make and model with semi punched tap holes for fixing the tap in different position in the basin, mounting the set over a suitable C.I. bracket as approved & fixing 32mm dia size C.P. Brass bottle trap with extension piece, wall flanges (heavy quality) , jointing with white Zinc & Spun yarn and fixing 15mm dia PVC water inlet connection of required length with C.P. brass unions at end and fixing 32mm dia C.P brass heavy quality waste coupling with C.P. brass ball chain & rubber plug and fixing 15mm C.P brass fancy stop cock including cost of jointing materials etc. as per requirement & Fixing C.P. brass 15mm dia fancy pillar tap of approved pillar tap make, including cost of jointing materials etc. Testing the entire system to the full satisfaction of theengineer in charge, wash basin ofhindware,Parryware,Cera WHITE COLOUR 630mm x 450mm, Item shall complete in all respect at specific locations as per direction of Engineer in Charge. |
| 24 | URINAL : Providing and fixing white vitreous china, battery based infrared sensor operated urinal of approved make having approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets, waste Coupling & C.P bottle traps etc. Complete in all respect at specific locations as per direction of Engineer in Charge. |
| 25 | URINAL SPREADER :Providing & fixing heavy quality C.P. brass spreaders 15mm dia including jointing with white zinc., spun yarn and testing etc. complete for urinals Complete in all respect at specific locations as per direction of Engineer in Charge. |
| 26 | NAHANI TRAP ;Providing & fixing 100mm diaPVC heavyduty nahani trap with brass C.P. dome type heavy duty S.S. Jali all as approved make quality includingjointing, testing etc, Complete in all respect at specific locations as per direction of Engineer in Charge. |
| 27 | C.P connection: Providing & fixing heavy quality C.P connection 15mm n.b. inlet connection with all brass unions at the ends as per site requirement andComplete in all respect at specific locations as per direction of Engineer in Charge.size up to 600mm long |
| 28 | FANCY FITTINTGS : Providing 15mm dia C.P. brass fancy fittings weighing not less than 600gm approved make and conforming to IS 781-1977 and fixing with pipe line including cost of jointing materials and pressure of 10 kg / CM2 and rectifying the leaky joints if any complete as specified & directed for the following. |
| 29 | BIB COCK : Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. :15 mm nominal bore ,Complete in all respect at specific locations as per direction of Engineer in Charge. |
| 30 | ANGLE VALVE :Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : 15mm nominal bore, Complete in all respect at specific locations as per direction of Engineer in Charge. |
| 31 | Fancy Bib tap two in one:Providing and Fixing fancy Bib tab two in one of Jaquar make (cat No.041) or equivalent as approved by EIC. Item shall be complete in all respect at specific locations as per direction of Engineer in Charge. |
| 32 | P/F of C.P Hand spray with soft PVC connection( 1 mtr.long) of Jaquar makeor equivalent as approved by EIC,with S.S Covering .Item shallbe complete in all respect at specific locations as per direction of Engineer in Charge. |
| 33 | S.S.SINK:- Providing & fixing S.S. sink without drainboard of Nirali make (Grace/ Grace plain 1 mm thick ) or equivalent as approved by EIC size of685mm x535mm x 250 mm including providing & fitting waste coupling of required size,P.V.C. bottle trap,mounted on fabricated G.I. Brackets if required etc.including making groove or hole in wall if necessaryhardware etc.Item shallbe complete in all respect at specific locations as per direction of Engineer in Charge. |
| 34 | P/F of 25mm n.b. Ball Valve of approved make.Item shallbe complete in all respect at specific locations as per direction of Engineer in Charge. |
| 35 | Providing and Fixingstand for Jet spray & Shower etc. complete. |
| 36 | MIRROR ;Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard boardfixed on wall with wooden cleats,C.P. brass screws and washers etc. Item shallbe complete in all respect at specific locations as per direction of Engineer in Charge. |
| 37 | TOWEL ROD :Providing & fixing approved C.P. brass SS towel rods of size 600mm x 20mm heavy duty with a pair of C.P. brass brackets wall flanges etc. fixed to wall with C.P. screwed on the rawl plugs etc. complete as and when required and Complete in all respect at specific locations as per direction of Engineer in Charge.(Jaquar/Plumberor equivalent make) |
| 38 | Providing and fixing C.P brass toilet paper holder including drilling, screwing etc Complete in all respect at specific locations as per direction of Engineer in Charge.(Jaquar/Plumberor equivalent make) |
| 39 | Storage Cabinet ( 1200mm height and 450mm depth) : Low Height Storage Sliding Door Unit (Ref. attached drawing) •The Rigid Knock Down Construction , Back , Sides and Door shall be made from 0.7 mm high yield strength CRCA, rest in 0.8 mm CRCA . CRCA - "D" Grade as per IS-513. • Sliding door arrangement shall have sliding door with top hanging arrangement to prevent derailment. Each door shall be provided with 2 plastic roller having steel ball bearing for smooth movement of door & less noise. • Locking shall be 5-lever cam lock for safe locking. Handle shall be plastic flush & recessed handle. Shelving shall have height wise adjustable shelf mounting. Uniformly Distributed Load Capacity of the shelf is 40 Kg maximum. Shall have 2 no. of adjustable full shelves. Leveler shall be screw type leveler with hex plastic base and overall finish shall be epoxy polyester coated to the thickness of 50 microns. A4 size box file can be stored vertically on two shelves and clear space above third shelf is 295 mm. 1200mm height and 450mm depth with wooden top of 25mm additional in unit height. (Only Elevational Area shall be measure for Payment ) |
| 40 | Computer Table: 1500 mm x 750 mm x 750 mm (L x B x H) Providing and placing Computer table (Ref. attached drawing) • Side panels or legs: out of 25 mm thk prelam particle board with flat pvc lipping edge banding considered only on the open-end conditions or metal powder coated legs at the end and shared condition. • WorkSurface: Should be made of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1500 mm w x 750 mm. • Pedestals: Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. • Heavy duty sliding keyboard and approved make cable manager to be provided on the table top. •Having Foot rest arrangements Note: All partitions and side panels have leveling screws for adjustment in case of uneven floor to take care of +/- 40 mm of uneven flooring. Bifma level three and griha compliance. |
| 41 | L Shape Table (1800 W x 750 D x 750 H) (Ref. attached drawing) • Table Top 25 mm PPB + 0.6 mm thick Post Formed Laminate + 1 mm thick BDL + 2 mm PVC + Modesty 18 mm thickplain particle board (PPB) + Clad 1.0 mm DL Table - 5026 size : 1800 W x 750 D x 750 H • Table size shall be 1800 Width mm x 750 Depth mm x 750 Height mm. • Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .Flat edge Duly sealed with 2 mm thick PVC beading. The modesty shall be 18 mm thick plain particle board PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading. Top 25 mm PPB + Clad 0.6 mm Post Formed Laminate + 1 mm (BDL) + Flat Edge 2 mm PVC + Modesty 18 mm PPB + Clad with 1.0 mm DL. Storage Unit RHS/LHS (size: 1050 W x 450 D x 705 H)-The top of Storage unit RHS/LHS shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate (BDL). Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative. Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading. All storage shall be as per the attached drawing with Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. |
| 42 | CONFERANCE TABLE (2400 W x 900 D x 750 H ) (Ref. attached drawing): Top 32 mm thick + Base material - 18 + 12 mm MDF + Post - laminated 0.6 mm on top and bottom + 2 mm thick PVC edge + Legs 1. mm Matt silver Anodized Aluminum extrusion + Access Flap + Switch Mounting Tray + Veil and Cross member 18 mm thick Talk Laminate10 Seater Boat Convex size :2400 W x 900 D x 750 H .Talk Laminate10 Seater Boat Convex sizeshall be2400 Width mmx 900 Depth mmx 750 Height mm. Top shall be 32 mm thick base material shall be 18 plus 12 mm MDF board. Post - laminated work - surface with 0.6 mm laminate on top and bottom surface plus 2 mm thick PVC edge banding shall be on straight top side edge and especially designed chamfered T - beading fixed at bottom side edge for sleek look. The veil and cross member shall be 18 mm thick base material shall be 16 mm plain particle board post laminated with 0.6 mm top laminate on either side plus 2 mm thick and 0.8 mm thick PVC edge banding. The legs shall be made from 1.6 mm matt silver anodized aluminum extrusion. Legs assembled together with a plastic glide holder at bottom and 5 mm thick MS powder coated sheet at top . Also there shall be access flap and switch mounting tray made from matt anodized aluminum extrusion. |
| 43 | COMPACTOR :Providing /Supply and fixing ofMovable File Storage System Single Face mechanical Unit05 Shelves , Size of1810 x 475 x 2130 mm- 01 no Double face mechanical unit 05 Shelves ,Size 1810 x 900x 2130 mm -01nos Single Face Stationary Unit 05 shelves Size 1810 x 475 x 2130 mm -01nos The Super structure covering matarila is22 SWG C.R.C.A. prime quality steel , powder coated . Complete in all respect at specific locations as per direction of Engineer in Charge. Make : KOMPRESS, Godrej or Equivalent. The detailed technical specifications for design, matarial and Components etc. will be as per technical specification of Compactor in Volume -2 of NIT ( Page No8-11) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
