Tender For Supply Ofmaterial, Design, Erection, Testing, Commissioning,For Re-Surfacing Of Approach Road From Main Road To Operation Circle Office Kangra Under Ed Kangra. (Seop-28/2023-24)., Kangra-Himachal Pradesh
TDR : 39070859
Tender Notice
BOQ
Expired
Kangra
Himachal Pradesh
Tender For Supply Ofmaterial, Design, Erection, Testing, Commissioning,For Re-Surfacing Of Approach Road From Main Road To Operation Circle Office Kangra Under Ed Kangra. (Seop-28/2023-24).
Name of Work:Tender for Supply ofmaterial, design, erection, testing, commissioning,for Re-surfacing of Approach road from Main Road to Operation Circle Office Kangra under ED Kangra. (SEOP-28/2023-24).
Sl. No.
Item Description
1
Re-surfacing of Approach road from Main Road to Operation Circle Office Kangra
2
Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deepand disposal of rubbish, lead up to 50 m and lift up to 1.5 mtr
3
Providing, laying, spreading and compacting graded stone aggregate (size range53mmto0.075mm)towetmixmacadam(WMM)specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonnecapacitytoachievethedesireddensity,complete as per specifications and directions of Engineer-in-Charge.
4
Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom with rapid setting bitumen emulsion on bituminous surface @ 0.25kg/sqm.
5
Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped withelectronic sensor to the required grade, level and alignment and rolling with smoothwheeled,vibratoryandtandemrollerstoachievethedesired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. 30 [email protected]% (percentageby weightoftotalmix) and lime filler@ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.
6
Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specifiedshade/colourusinghotthermoplasticmaterialbyfully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P,cleaningtheroadsurfaceofalldirt,seals,oil, greaseandforeign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
7
Quantities are mentioned above are tentative and Actual Quantity shall be worked out after Check Survey to be carried out by the successful Tender and detailed Engineering and finalization of Tower location Chart.Payment shall be made as per Approved Bill of Material/Actual Quantities measured at site.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
