Providing And Fixing Various Types Of Furniture In Judicial Court Complex Rajpura Distt Patiala , Retiring Room , Big Table ( W1650 X D1650 X H750 ) With Side Unit: Providing & Fixing Modular Table In Completely Knock Down Conditions With An Overall Size 1650Mm X 1650Mm X 750Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Work Top Shall Have The Size 1650Mm X 750Mm Made Up Of 25Mm Thick Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape With Front And Back Full Round Post Form And Other Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Table Top Shall Be Supported Over Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Be Made Up Of 25Mm Thick Particle Board And Profile Shall Be In Linear Shape With Front And Back Full Round Post Form And Other Edge With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. The Table Shall Be Supplied With Side Unit For Storage Purpose With An Overall Size 900Mm X 450Mm X 750Mm. The Side Unit Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Top 25Mm Thick And Other Parts 18Mm Thick Like Shutter, Back, Side Panel Etc. It Shall Have 2 Sliding Shutter Which Slides Over Sliding Rail Track. The Shutter Shall Be Operated With The Assistance Of Ss Handle And Multi-Purpose ( Mp ) Locking Mechanism. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. A Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 680Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel Having To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Pedestal Shall Be Mounted Over 50Mm Injection Moulded Nylon Castor. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007, Issued By Nabcb Aaccredited Labs, Bifma Membership And Aiota Certification. The Oem Should Have Green Guard Certification Issued By Ul For One Or More Products. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. , Centre Table - 1200 X 600 Providing & Fixing Center Table With An Overall Size 1200Mm X 600Mm X 450Mm. The Top Of The Table Shall Be Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823. The Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Ms Powder Coated Pipe Frame Having Cross-Section Area 30Mm X 30Mm. The Table Under Structure Shall Consist Of Ms / Crca Chrome Plated Round Pipe Having Dia. 28Mm. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. , Small Table - Mega Corner Table ( 600 X 600 ) . S.S. Pipe Frame, Chrome Finish, Toughened Glass, Top 12Mm Thick Providing & Fixing Corner Table With An Overall Size 600Mm X 600Mm X 450Mm. The Top Shall Be Made Up Of 12Mm Thick Toughened Glass. The Profile Shall Be In Square Shape With Round Corner And Bevelled Edges. The Top Shall Be Supported On Vacuum Caps Situated Over Ss 202 Grade Pipe Frame. The Under Structure Shall Consist Of Ss Pipe Frame Having Size 40Mm X 20Mm. 1 Nos. Foot Step Shall Be Provided Between The Frame With The Size 40Mm X 20Mm. There Shall Be Ppcp Shoe Provided At The Bottom To Avoid Scratches On The Floor. , Computer Table- 2 ( 1200 X 600 ) Providing & Fixing Computer Desk Of Size 1200Mm ( W ) X 600Mm ( D ) X 750Mm ( H ) . It Should Have Work Top Made Up Of 18Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit Theboard Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Board Shall Be Supported On Fixed Pedestal At One End And Fixed Cpu Unit At Another End. The Desk Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Desk. It Should Be 18Mm Thick Pre-Laminate Particle Board Connected With Both End.Key-Board Trey Shall Be Provided 18Mm Thick Pre-Laminated Particle Board With An Overall Size 550Mm X 350Mm. The Trey Shall Be Operated By Sliding Channel Runs On Nylon Roller To Smooth Operation. Fixed Pedestal Shall Be Provided At One Side With The Size 335Mm X 470Mm X 725Mm Having 3 Drawer Operated On Sliding Channel And 1 Filing Drawer Having Operated On Ball Bearing Channel. All Drawer Shall Be Operated With Ss Handle With Multi Purpose ( Mp ) Locking Mechanism. Openable Storage Shall Be Provided At Another Side With The Size 294Mm X 450Mm X 725Mm Having One Adjustment Shelf To Accumulate Cpu. Complete Understructure Made In 18Mm Thick Pre-Laminated Particle Board With Appropriate Edge Banding And Drawer Base Shall Be 9Mm Thick. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding Skirting Shall Be Provided At Bottom.The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007, Issued By Nabcb Aaccredited Labs, Bifma Membership And Aiota Certification. The Oem Should Have Green Guard Certification Issued By Ul For One Or More Products.The Board Used Should Meet International Standards Of Quality And Safety, Indian Standard Is12823 Grade Ii Should Meet Long Time Loadbending, Screw–Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. , Revolving Chair ( Officer ) ( High Back Chair, Pp Arm, Gas Lift, Nylon Base, Leatherette Tapestry Providing & Fixing Ergonomically Designed, Comfortable & Aesthetically Appealing High Back Chair. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Malaysian Plywood With Hr Polyurethane Foam 50Mm Thick Having Density 40Kg / M³ Upholstered With Leatherite Tapestry In Black Colour With 0.8Mm Thick And 535 Gsm And The Back Shall Be Made Of Double Layeredmalaysian Moulded Hot Pressed Plywood ( 12+6 ) Mm Thick With Hr Polyurethane Foam 30Mm Thick Having Density 32Kg / M³ Upholstered With Leatherite Tapestry In Black Colour With 0.8Mm Thick And 535 Gsm. Headrest Shall Be Provided For Comfort Of Head. Seat And Back Shall Be Joined With Hr Steel Sheet. The Armrest Shall Be Used Pp Arm Fixed Type Completely Joint With Seat. The Chair Shall Have Synchro Knee Tilt Revolving Mechanism With Four Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustable 100Mm With Bifma Standard Class-3 Gaslift. The Pedestal Shall Be Made Up Of Injection Moulded Black Nylon Having Pitch Circle Dia 700 Mm Fitted With 5 Nos. 50Mm Twin Wheel Castors Which Shall Be Made Of Injection Moulded Black Nylon 30% Glass Filled Having Self Lubricating Property For Friction Free Movemen With Bifma Standards. The Seat Size Shall Be 480±10Mm ( W ) X 495±10Mm ( D ) And Back Size Shall Be 750±10Mm ( H ) From Seat & Overall Height = 1230±10Mm. , Sofa Set ( 2+2 ) Seater Providing & Fixing A Two Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg / M³ In Seat And 32Kg / M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg / M³. The Base Of The Arm Shall Have Ss Frame Supported On Pre-Laminated Particle Board. The Structure Shall Be Upholstered With Leatherite Tapestry 1±0.2 Mm Thick And 571 Gsm. The Understructure Shall Be Supported By Pipe Frame Leg Of Ss. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 500±10 Mm ( D ) X 1120±10 Mm ( W ) , Seat Height = 420±10 Mm, Overall Width = 1400±10 Mm, Overall Depth = 790±10 Mm & Overall Height = 660±10 Mm. , Chairs - ( Chrome Plate ) Providing & Fixing Visitor Chair Ergonomically Designed For User Comfort & Shall Have Asthetically Appealing Design. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Malaysian Plywood With Hr Polyurethane Foam 50Mm Thick Having Density 40Kg / M³ Upholstered With Leatherite In Black Colour With 0.8Mm Thick And 535 Gsm And The Back Shall Be Made Of Double Layered Moulded Hot Pressed Malaysian Plywood ( 12+6 ) Mm Thick With Hr Polyurethane Foam 30Mm Thick Having Density 32Kg / M³ Upholstered With Leatherite In Black Colour With 0.8Mm Thick And 535 Gsm. The Frame Shall Be Cantilever Support Made Up Of Ms Crca Chrome Plated Round Pipe Of Dia 25.4Mm With 2Mm Thick. The Armrest Shall Be Covered With Wooden Arm. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor . The Seat Size Shall Be 475±10Mm ( W ) X 490±10Mm ( D ) And Back Size Shall Be 470±10Mm ( H ) From Seat & Overall Height = 930±10Mm. , Almirah - ( 915 X 485 X 1980 ) Providing & Fixing Steel Almirah In Perfectly Upright And Straight Position. The Overall Size Of The Almirah Shall Be 915Mm ( W ) X 485Mm ( D ) X 1980Mm ( H ) Including Legs. It Should Be Supplied With 4 Nos. Of Adjustable Shelves I.E. 5 Loading Compartments. Door Shall Be Made Of 1Mm Thick And All Other Components Shall Be Made Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Stiffeners Shall Be Provided In Shelf & Door. The Steel Hinged Door Shall Be Provided With Locking Mechanism Which Is Assembled With Bolt Arrangement. The Shelves Shall Have Folded Constructions Which Have Intrinsic Rigidity And High Load Carrying Capacity. Uniformly Distributed Load Capacity Per Each Shelf Shall Be 40Kg Maximum. The Complete Steel Structure Shall Be Constructed By Welding And Provide Finishing With Epoxy Polyester Powder Coated To Be Thickness 50-60?. , Book Rack - 4Dr Book Case ( W915 X D320 X H1750 ) Providing & Fixing Metal Book Case With An Overall Size 915 Mm ( W ) X 320 Mm ( D ) X 1750Mm ( H ) . The Book Case Shall Be Supplied With 4 Nos. Of Individual Compartments. Top, Back & Side Panels Shall Be Made Of 0.8Mm And Rest 1Mm High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Each Door Shall Have Individual Locking Provision And 4 Mm Thick Transparent Glass For Clear Inside Vision Secured In A Metal Frame Through Rubber Gasket. Each Door Shall Have Scissor Mechanism For Receding Inside The Top Of Respective Compartment Which Ensures Parallel & Smooth Movement. Each Door Shall Have Plastic Side End Caps As Handle Which Is Easy To Grip. Each Compartment Has A Storage Shelf Having Uniformly Distributed Load Capacity Of Each Shelf Is 40 Kg Maximum. The Finish Is Epoxy Polyester Powder Coated To The Thickness Of 40-60?. Adjustable Leveler Shall Be Provided With Metal Insert To Resist Scratches On The Floor And Also Level & Support Structure. , Table Top- 600X450 Mm Providing & Fixing Wooden Laptop Stand Table Top Desk Organizer For Writing / Sketching Stand, Wooden Desk Organizer ( Brown, Big Size 600X450 Mm ) . Portable, Adjustable, Foldable.Uses For Office Purpose, It Maintains Privacy, Reduces Strain On Eyes, Helpful In No Cervical Pain, Improves Handwriting, When You Do Work On It Your Work Efficiency Increases. , Court Room , Big Desk Table - ( W2400 X D2300 X H750 ) Providing & Fixing Executive Table With Credenza Unit And Pedestal In Completely Knock Down Conditions With An Overall Size 2400Mm X 2300Mm X 750Mm That Is To Be Assembled At Site. The Worktop Shall Be 43Mm Thick Having The Combination Of 18Mm Pre-Laminated Particle Board With Approved Laminate And Shade As Top And 25Mm Medium Density Fibre-Board As Base Top. The Worktop Shall Have The Size 2400Mm X 1100Mm Having The Profile In Rectangle Shape And The Edges ( Top ) Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius And Deco Paint With Half Round Post Form Edges Along With Grooves ( Base Top ) . The Top Shall Be Supported On 4 Nos. Of Ss Pipe Strips Having Size 230Mm X 60Mm X 15Mm. The Table Shall Be Clad With 48Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 48Mm Thick Pre-Laminated Particle Board In Linear Shape With Appropriate Pvc Edge Banding And Shall Be Cladded With Ss Pipe Frame On Sides Having Cross-Section Area 95Mm X 25Mm. The Understructure Shall Consist Of Ss 202 Grade Loop Leg Having Cross-Section Area 95Mm X 25Mm. There Shall Be Buffers Provided To Avoid To Avoid Scratches On The Floor As Well As Uneven Surfacing. The Credenza Unit Shall Have The Size 1600Mm X 500Mm X 670Mm. It Should Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Top 25Mm Thick, Drawer Base 9Mm Thick And Other Parts 18Mm Thick Like Shutter, Back, Facia, Side Panel Etc. It Shall Have 7 Drawer And Operated With The Assistance Of Ss Handle And Easily Close & Open With Roller Channel Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Credenza Unit Shall Be Mounted On Ss 202 Grade Loop Leg Having Cross-Sectional Area 95Mm X 25Mm. Pedestal Shall Be Provided With An Overall Size 400Mm X 500Mm X 660Mm. It Should Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Facia Shall Be 18Mm Thick & Drawer Base Shall Be 9Mm Thick. It Shall Have 3 Nos. Of Drawer Having Same Size And Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Locked With One Single Key. The Pedestal Shall Be Mounted On Injection Moulded Nylon Castor.The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007, Issued By Nabcb Aaccredited Labs, Bifma Membership And Aiota Certification. The Oem Should Have Green Guard Certification Issued By Ul For One Or More Products. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. , Table For Reader And Steno- ( 4X2 ) Providing & Fixing Executive Table With An Overall Size 1200Mm X 600Mm X 750Mm. The Top Shall Be Made Up Of 18Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Crca C-Frame With 0.9Mm Thick Duly Powder Coated. The Understructure Shall Consist Of Ms / Crca Rectangle Pipe Frame Having Cross-Section Area 38Mm X 25Mm With 1.2Mm Thick. Fixed Top Supporting Pedestal Shall Be Supplied At One Side Of The Table. The Pedestal Shall Be Made Up Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade D Confirming To Is:513. It Should Have 3 Nos. Of Drawer I.E. 2 Box And 1 Filing. It Should Be Operated On Ball Bearing Sliding Channel And Recessed Plastic Handle With Centralized Locking Mechanism. The Table Shall Be Clad With Modesty Panel. It Should Be 18Mm Thick Made Up Of Pre-Laminated Particle Board.There Shall Be Leveller Provided At The Bottom. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007, Issued By Nabcb Aaccredited Labs, Bifma Membership And Aiota Certification. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. , Revolving Chair ( Officer ) Providing & Fixing Ergonomically Designed, Comfortable & Aesthetically Appealing High Back Chair. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Plywood With Hr Polyurethane Foam 50Mm Thick Having Density 40Kg / M³ Upholstered With Black Leatherite Tapestry With 0.8Mm Thick And 535 Gsm And The Back Shall Be Supported By Metal Insert Ms Crca Chrome Plated With Hr Polyurethane Foam 12Mm Thick Having Density 23Kg / M³ Upholstered With Black Leatherite With 0.8Mm Thick And 535 Gsm.Tthe Armrest Shall Be Used Cushion Arm Completely Joint With Seat And Back. The Chair Shall Have Synchro Tilt Revolving Mechanism With Single Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Upto 120Mm With Bifma Standard Class-3 Gaslift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi / Bifma X5.1-2011 Standards. The Pedestal Shall Be Made Up Of Ms Crca Chrome Plated Having Pitch Circle Dia 700 Mm Fitted With 5 Nos. 50Mm Twin Wheel Castors Which Shall Be Made Of Injection Moulded Black Nylon 30% Glass Filled Having Self Lubricating Property For Friction Free Movemen With Bifma Standards. The Seat Size Shall Be 490±10 Mm ( W ) X490±10 Mm ( D ) And Back Size Shall Be 640±10 Mm ( H ) From Seat & Overall Height = 1095±10 Mm. , Chair For Reader And Steno - Providing & Fixing Revolving Chair. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Moulded Polyurethane Foam Having Density 45Kg / M³ And The Back Shall Be Padded With High Resilience Moulded Polyurethane Foam Having Density 40Kg / M³. The Same Shall Be Upholstered With Jute Fabric Tapestry 1Mm Thick And 300 Gsm. The Chair Shall Be Supplied With Polypropylene / Abs Seat And Back Cover For External Support. The Backrest Of The Chair Shall Be Made By Keeping The Natural Curvature Of The Spine. The Armrest Shall Be Used Black Integral Polypropylene Arm Completely Joint With Seat. For Seating Durability The Chair Shall Have Push Back 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 100Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi / Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Injection Moulded 30% Glass Filled Black Nylon Having Pitch Circle Dia. 650 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi / Bifma Standards X5.1-2011 Tested To Perform 98, 000 Cycles With 250Lbs Load. The Seat Size Shall Be 430±10 Mm ( D ) X 460±10 Mm ( W ) And Back Size Shall Be 415±10 Mm ( W ) X 400±10 Mm ( Ht ) From Seat. Overall Height Shall Be = 920±10 Mm, Base Width / Depth = 710±10 Mm. , Almirah For Reader & Judgement Writer - ( 915 X 485 X 1980 ) Providing & Fixing Steel Almirah In Perfectly Upright And Straight Position. The Overall Size Of The Almirah Shall Be 915Mm ( W ) X 485Mm ( D ) X 1980Mm ( H ) Including Legs. It Should Be Supplied With 4 Nos. Of Adjustable Shelves I.E. 5 Loading Compartments. Door Shall Be Made Of 1Mm Thick And All Other Components Shall Be Made Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Stiffeners Shall Be Provided In Shelf & Door. The Steel Hinged Door Shall Be Provided With Locking Mechanism Which Is Assembled With Bolt Arrangement. The Shelves Shall Have Folded Constructions Which Have Intrinsic Rigidity And High Load Carrying Capacity. Uniformly Distributed Load Capacity Per Each Shelf Shall Be 40Kg Maximum. The Complete Steel Structure Shall Be Constructed By Welding And Provide Finishing With Epoxy Polyester Powder Coated To Be Thickness 50-60?. , Book Rack - 4Dr Book Case ( W915 X D320 X H1750 ) Providing & Fixing Metal Book Case With An Overall Size 915 Mm ( W ) X 320 Mm ( D ) X 1750Mm ( H ) . The Book Case Shall Be Supplied With 4 Nos. Of Individual Compartments. Top, Back & Side Panels Shall Be Made Of 0.8Mm And Rest 1Mm High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Each Door Shall Have Individual Locking Provision And 4 Mm Thick Transparent Glass For Clear Inside Vision Secured In A Metal Frame Through Rubber Gasket. Each Door Shall Have Scissor Mechanism For Receding Inside The Top Of Respective Compartment Which Ensures Parallel & Smooth Movement. Each Door Shall Have Plastic Side End Caps As Handle Which Is Easy To Grip. Each Compartment Has A Storage Shelf Having Uniformly Distributed Load Capacity Of Each Shelf Is 40 Kg Maximum. The Finish Is Epoxy Polyester Powder Coated To The Thickness Of 40-60?. Adjustable Leveler Shall Be Provided With Metal Insert To Resist Scratches On The Floor And Also Level & Support Structure. , Table For Advocates - ( W1500 X D750 X H750 ) Providing & Fixing Modular Table In Completely Knock Down Conditions With An Overall Size 1500Mm X 750Mm X 750Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Worktop Shall Be Made Up Of 25Mm Thick Particle Board With Approved Laminate And Finish As Per Approved Shade. The Top Profile Shall Be In Rectangle Shape With Front And Back Full Round Post Form And Other Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. A Pullout Keyboard Trey Shall Be Provided Of 18Mm Thick Pre-Laminated Particle Board Having Size 550Mm X 280Mm. The Trey Shall Be Operated On Keyboard Channel. The Top Shall Be Supported Over Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be Made Up Of 25Mm Thick Particle Board And Profile Shall Be In Linear Shape With Front And Back Full Round Post Form And Other Edge With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. A Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 650Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Pedestal Shall Be Mounted Over 50Mm Injection Moulded Nylon Castor. A Movable Type Cpu Unit Shall Be Provided With An Overall Size 468Mm X 284Mm. The Cpu Unit Shall Be Made Up Of 18Mm Thick Pre-Laminated Particle Board. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007, Issued By Nabcb Aaccredited Labs, Bifma Membership And Aiota Certification. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. , Chairs For Advocates - Gb 406 Providing & Fixing Visitor Chair With Ergonomic Design For User Comfort. The Seat And Back Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Moulded Polyurethane Foam 50Mm Thick Having Density 40Kg / M³ In Seat And 40Mm Thick Having Density 40Kg / M³ In Back. The Same Shall Be Upholstered With Tapestry 1Mm Thick And 300 Gsm. The Back And Base Of Chair Shall Be Supplied With Polypropylene Bead On Edges And The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine. The Seat And Back Shall Be Arrested Together With 50-60? Thick Powder Coated Hr Steel Spine And The Armrest Shall Be Used Of Black Integral Polyurethane Arm With Metal Insert Completely Joint With Seat And Back. The Frame Structure Shall Be Cantilever Support Type Made Up Of Ms / Crca Powder Coated Round Pipe Of Dia. 25.4Mm With 2Mm Thick. There Shall Be Co-Polymer Polypropylene Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 460±10 Mm ( W ) X 450±10 Mm ( D ) And Back Size Shall Be 460±10 Mm ( W ) X 400±10 Mm ( H ) From Seat. Seat Height = 450±10 Mm, Overall Height Shall Be = 830±10 Mm, Overall Width - 555±10 Mm, Overall Depth = 595±10 Mm. , Benches For Munshi Of Advocates ( W1200 X D600 X H750 Providing & Fixing Executive Table With An Overall Size 1200Mm X 600Mm X 750Mm. The Top Shall Be Made Up Of 18Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Crca C-Frame With 0.9Mm Thick Duly Powder Coated. The Understructure Shall Consist Of Ms / Crca Rectangle Pipe Frame Having Cross-Section Area 38Mm X 25Mm With 1.2Mm Thick. Fixed Top Supporting Pedestal Shall Be Supplied At One Side Of The Table. The Pedestal Shall Be Made Up Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade D Confirming To Is:513. It Should Have 3 Nos. Of Drawer I.E. 2 Box And 1 Filing. It Should Be Operated On Ball Bearing Sliding Channel And Recessed Plastic Handle With Centralized Locking Mechanism. The Table Shall Be Clad With Modesty Panel.The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. , Table For Peons - ( W1200 X D600 X H750 ) Providing & Fixing Executive Table In Knock Down Condition With An Overall Size 1200Mm X 600Mm X 750Mm That Is To Be Assembled At Site. The Worktop Shall Be Made Up Of 18Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Ms / Crca Rectangle Pipe Frame Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. The Table Understructure Shall Be Supplied With Ms Round Pipe Having Dia. 25.4Mm With 1.6Mm Thick. 1 Nos. Footstep Shall Be Provided Between Both Side Leg With The Same Size I.E Dia. 25.4Mm With 1.6Mm Thick. Fixed Pedestal Unit Shall Be Supplied With 3 Nos. Of Drawer At One Side. All The Drawer Shall Be Synchronized Locked With Central Locking Mechanism By One Single Key. The Drawer Shall Be Operated With Recessed Handle. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007, Issued By Nabcb Aaccredited Labs, Bifma Membership And Aiota Certification.The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. , Table Top- 600X450 Mm Providing & Fixing Wooden Laptop Stand Table Top Desk Organizer For Writing / Sketching Stand, Wooden Desk Organizer ( Brown, Big Size 600X450 Mm ) . Portable, Adjustable, Foldable.Uses For Office Purpose, It Maintains Privacy, Reduces Strain On Eyes, Helpful In No Cervical Pain, Improves Handwriting, When You Do Work On It Your Work Efficiency Increases. , Judgement Writer Room , Computer Table - ( 4 X 2 ) Providing & Fixing Executive Table With An Overall Size 1200Mm X 600Mm X 750Mm. The Top Shall Be Made Up Of 18Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Crca C-Frame With 0.9Mm Thick Duly Powder Coated. The Understructure Shall Consist Of Ms / Crca Rectangle Pipe Frame Having Cross-Section Area 38Mm X 25Mm With 1.2Mm Thick. Fixed Top Supporting Pedestal Shall Be Supplied At One Side Of The Table. The Pedestal Shall Be Made Up Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade D Confirming To Is:513. It Should Have 3 Nos. Of Drawer I.E. 2 Box And 1 Filing. It Should Be Operated On Ball Bearing Sliding Channel And Recessed Plastic Handle With Centralized Locking Mechanism. The Table Shall Be Clad With Modesty Panel.The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. , Computer Chair - Providing & Fixing High Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat And Back Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Moulded Polyurethane Foam 50Mm Thick Having Density 40Kg / M³ In Seat And 40Mm Thick Having Density 32Kg / M³ In Back. The Same Shall Be Upholstered With Fabric Tapestry 1Mm Thick And 300 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Lumbar Support. The Seat And Back Shall Be Arrested Together With 50-60? Thick Powder Coated Hr Steel Spine And The Armrest Shall Be Used Black Integral Polypropylene Arm Completely Joint With Seat. For Seating Durability The Chair Shall Have Synchro Tilt 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 120Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi / Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Injection Moulded In Black 30% Glass Filled Nylon Having Pitch Circle Dia. 700Mm And Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi / Bifma Standards X5.1-2011 Tested To Perform 98, 000 Cycle With 250Lbs Load. The Seat Size Shall Be 465±10 Mm ( W ) X 460±10 Mm ( D ) And Back Size Shall Be 480±10 Mm ( W ) X 625±10 Mm ( H ) From Seat & Overall Height = 1060±10 Mm. , Ahlmad Room , Table - ( 1200 X 600 ) Providing & Fixing Executive Table In Knock Down Condition With An Overall Size 1200Mm X 600Mm X 750Mm That Is To Be Assembled At Site. The Worktop Shall Be Made Up Of 18Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Ms / Crca Rectangle Pipe Frame Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. The Table Understructure Shall Be Supplied With Ms Round Pipe Having Dia. 25.4Mm With 1.6Mm Thick. 1 Nos. Footstep Shall Be Provided Between Both Side Leg With The Same Size I.E Dia. 25.4Mm With 1.6Mm Thick. Fixed Pedestal Unit Shall Be Supplied With 3 Nos. Of Drawer At One Side. All The Drawer Shall Be Synchronized Locked With Central Locking Mechanism By One Single Key. The Drawer Shall Be Operated With Recessed Handle. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007, Issued By Nabcb Aaccredited Labs, Bifma Membership And Aiota Certification.The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. , Chairs Providing & Fixing Visitor Chair With Ergonomic Design For User Comfort. The Seat And Back Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Moulded Polyurethane Foam 50Mm Thick Having Density 40Kg / M³ In Seat And 40Mm Thick Having Density 40Kg / M³ In Back. The Same Shall Be Upholstered With Tapestry 1Mm Thick And 300 Gsm. The Back And Base Of Chair Shall Be Supplied With Polypropylene Bead On Edges And The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine. The Seat And Back Shall Be Arrested Together With 50-60? Thick Powder Coated Hr Steel Spine And The Armrest Shall Be Used Of Black Integral Polyurethane Arm With Metal Insert Completely Joint With Seat And Back. The Frame Structure Shall Be Cantilever Support Type Made Up Of Ms / Crca Powder Coated Round Pipe Of Dia. 25.4Mm With 2Mm Thick. There Shall Be Co-Polymer Polypropylene Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 460±10 Mm ( W ) X 450±10 Mm ( D ) And Back Size Shall Be 460±10 Mm ( W ) X 400±10 Mm ( H ) From Seat. Seat Height = 450±10 Mm, Overall Height Shall Be = 830±10 Mm, Overall Width - 555±10 Mm, Overall Depth = 595±10 Mm. , Almirah ( 915 X 485 X 1980 ) Providing & Fixing Steel Almirah In Perfectly Upright And Straight Position. The Overall Size Of The Almirah Shall Be 915Mm ( W ) X 485Mm ( D ) X 1980Mm ( H ) Including Legs. It Should Be Supplied With 4 Nos. Of Adjustable Shelves I.E. 5 Loading Compartments. Door Shall Be Made Of 1Mm Thick And All Other Components Shall Be Made Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Stiffeners Shall Be Provided In Shelf & Door. The Steel Hinged Door Shall Be Provided With Locking Mechanism Which Is Assembled With Bolt Arrangement. The Shelves Shall Have Folded Constructions Which Have Intrinsic Rigidity And High Load Carrying Capacity. Uniformly Distributed Load Capacity Per Each Shelf Shall Be 40Kg Maximum. The Complete Steel Structure Shall Be Constructed By Welding And Provide Finishing With Epoxy Polyester Powder Coated To Be Thickness 50-60?. , Racks ( W900 X D450 X H1800 ) With 6 Shelves Providing & Fixing A Slotted Angle Rack With An Overall Size 900Mm ( W ) X 450Mm ( D ) X 1800Mm ( H ) . The Panel Shall Have 5 Nos. Of Shelves Made Up Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Crca Slotted Angle Shall Be Supplied With 2Mm Thick Having Size 40Mm X 40Mm. All Steel Components Shall Be 40-60? Thick ( Dft ) Powder Coated After 7 Tank Pre-Treatment Process Flow. Corner Plate ( Gussets ) And Fasteners Shall Be Provided For Complete Assembly. , Computer Table 2 ( W1200 X D600 X H750 ) Providing & Fixing Executive Table With An Overall Size 1200Mm X 600Mm X 750Mm. The Top Shall Be Made Up Of 18Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Crca C-Frame With 0.9Mm Thick Duly Powder Coated. The Understructure Shall Consist Of Ms / Crca Rectangle Pipe Frame Having Cross-Section Area 38Mm X 25Mm With 1.2Mm Thick. Fixed Top Supporting Pedestal Shall Be Supplied At One Side Of The Table. The Pedestal Shall Be Made Up Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade D Confirming To Is:513. It Should Have 3 Nos. Of Drawer I.E. 2 Box And 1 Filing. It Should Be Operated On Ball Bearing Sliding Channel And Recessed Plastic Handle With Centralized Locking Mechanism. The Table Shall Be Clad With Modesty Panel.The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. , Computer Chair - Providing & Fixing High Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat And Back Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Moulded Polyurethane Foam 50Mm Thick Having Density 40Kg / M³ In Seat And 40Mm Thick Having Density 32Kg / M³ In Back. The Same Shall Be Upholstered With Fabric Tapestry 1Mm Thick And 300 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Lumbar Support. The Seat And Back Shall Be Arrested Together With 50-60? Thick Powder Coated Hr Steel Spine And The Armrest Shall Be Used Black Integral Polypropylene Arm Completely Joint With Seat. For Seating Durability The Chair Shall Have Synchro Tilt 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 120Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi / Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Injection Moulded In Black 30% Glass Filled Nylon Having Pitch Circle Dia. 700Mm And Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi / Bifma Standards X5.1-2011 Tested To Perform 98, 000 Cycle With 250Lbs Load. The Seat Size Shall Be 465±10 Mm ( W ) X 460±10 Mm ( D ) And Back Size Shall Be 480±10 Mm ( W ) X 625±10 Mm ( H ) From Seat & Overall Height = 1060±10 Mm. , Waiting Hall , Waiting Area Chair 3-Seater ( Size In Mm - 1750 ( L ) X 710 ( D ) X 755 ( H ) ) Providing & Fixing Three Seater Bench. The Seat And Back Shall Be Made Up Of High Quality Cold Rolled Ms Perforated Sheet Of 1.2Mm Thick, Pressed And Welded To Form The Shape. The Seat And Back Electrostatically Coated With Epoxy Powder And Then Cured Under Heat To Allow It To Form A Skin.. The Seat And Back Shall Be Upholestered With Latherite Tapestrythe Armrest Shall Be Made Up Of Mild Steel Powder Coated Tube With 1.2Mm Thick. The Base Structure Shall Be Supported By Ms Powder Coated With 40-60? ( Dft ) . There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 440±10 Mm ( D ) X 405±10 Mm ( H ) From Ground. Overall Height Shall Be = 775±10 Mm, Overall Depth = 710±10 Mm & Overall Width = 1765±10 Mm. , Record Room New , Racks ( W900 X D450 X H1800 ) Providing & Fixing A Slotted Angle Rack With An Overall Size 900Mm ( W ) X 450Mm ( D ) X 1800Mm ( H ) . The Panel Shall Have 5 Nos. Of Shelves Made Up Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Crca Slotted Angle Shall Be Supplied With 2Mm Thick Having Size 40Mm X 40Mm. All Steel Components Shall Be 40-60? Thick ( Dft ) Powder Coated After 7 Tank Pre-Treatment Process Flow. Corner Plate ( Gussets ) And Fasteners Shall Be Provided For Complete Assembly. , Tables - ( W1200 X D600 X H750 ) Providing & Fixing Executive Table With An Overall Size 1200Mm X 600Mm X 750Mm. The Top Shall Be Made Up Of 18Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Crca C-Frame With 0.9Mm Thick Duly Powder Coated. The Understructure Shall Consist Of Ms / Crca Rectangle Pipe Frame Having Cross-Section Area 38Mm X 25Mm With 1.2Mm Thick. Fixed Top Supporting Pedestal Shall Be Supplied At One Side Of The Table. The Pedestal Shall Be Made Up Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade D Confirming To Is:513. It Should Have 3 Nos. Of Drawer I.E. 2 Box And 1 Filing. It Should Be Operated On Ball Bearing Sliding Channel And Recessed Plastic Handle With Centralized Locking Mechanism. The Table Shall Be Clad With Modesty Panel.The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. , Chairs Providing & Fixing Revolving Chair. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Moulded Polyurethane Foam Having Density 45Kg / M³ And The Back Shall Be Padded With High Resilience Moulded Polyurethane Foam Having Density 40Kg / M³. The Same Shall Be Upholstered With Jute Fabric Tapestry 1Mm Thick And 300 Gsm. The Chair Shall Be Supplied With Polypropylene / Abs Seat And Back Cover For External Support. The Backrest Of The Chair Shall Be Made By Keeping The Natural Curvature Of The Spine. The Armrest Shall Be Used Black Integral Polypropylene Arm Completely Joint With Seat. For Seating Durability The Chair Shall Have Push Back 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 100Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi / Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Injection Moulded 30% Glass Filled Black Nylon Having Pitch Circle Dia. 650 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi / Bifma Standards X5.1-2011 Tested To Perform 98, 000 Cycles With 250Lbs Load. The Seat Size Shall Be 430±10 Mm ( D ) X 460±10 Mm ( W ) And Back Size Shall Be 415±10 Mm ( W ) X 400±10 Mm ( Ht ) From Seat. Overall Height Shall Be = 920±10 Mm, Base Width / Depth = 710±10 Mm. , Almirah ( 915 X 485 X 1980 ) Providing & Fixing Steel Almirah In Perfectly Upright And Straight Position. The Overall Size Of The Almirah Shall Be 915Mm ( W ) X 485Mm ( D ) X 1980Mm ( H ) Including Legs. It Should Be Supplied With 4 Nos. Of Adjustable Shelves I.E. 5 Loading Compartments. Door Shall Be Made Of 1Mm Thick And All Other Components Shall Be Made Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Stiffeners Shall Be Provided In Shelf & Door. The Steel Hinged Door Shall Be Provided With Locking Mechanism Which Is Assembled With Bolt Arrangement. The Shelves Shall Have Folded Constructions Which Have Intrinsic Rigidity And High Load Carrying Capacity. Uniformly Distributed Load Capacity Per Each Shelf Shall Be 40Kg Maximum. The Complete Steel Structure Shall Be Constructed By Welding And Provide Finishing With Epoxy Polyester Powder Coated To Be Thickness 50-60?. , Server Room New , Tables - ( 1200 X 600 ) Providing & Fixing Executive Table With An Overall Size 1200Mm X 600Mm X 750Mm. The Top Shall Be Made Up Of 18Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Crca C-Frame With 0.9Mm Thick Duly Powder Coated. The Understructure Shall Consist Of Ms / Crca Rectangle Pipe Frame Having Cross-Section Area 38Mm X 25Mm With 1.2Mm Thick. Fixed Top Supporting Pedestal Shall Be Supplied At One Side Of The Table. The Pedestal Shall Be Made Up Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade D Confirming To Is:513. It Should Have 3 Nos. Of Drawer I.E. 2 Box And 1 Filing. It Should Be Operated On Ball Bearing Sliding Channel And Recessed Plastic Handle With Centralized Locking Mechanism. The Table Shall Be Clad With Modesty Panel.The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. , Chairs Providing & Fixing Visitor Chair With Ergonomic Design For User Comfort. The Seat And Back Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Moulded Polyurethane Foam 50Mm Thick Having Density 40Kg / M³ In Seat And 40Mm Thick Having Density 40Kg / M³ In Back. The Same Shall Be Upholstered With Tapestry 1Mm Thick And 300 Gsm. The Back And Base Of Chair Shall Be Supplied With Polypropylene Bead On Edges And The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine. The Seat And Back Shall Be Arrested Together With 50-60? Thick Powder Coated Hr Steel Spine And The Armrest Shall Be Used Of Black Integral Polyurethane Arm With Metal Insert Completely Joint With Seat And Back. The Frame Structure Shall Be Cantilever Support Type Made Up Of Ms / Crca Powder Coated Round Pipe Of Dia. 25.4Mm With 2Mm Thick. There Shall Be Co-Polymer Polypropylene Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 460±10 Mm ( W ) X 450±10 Mm ( D ) And Back Size Shall Be 460±10 Mm ( W ) X 400±10 Mm ( H ) From Seat. Seat Height = 450±10 Mm, Overall Height Shall Be = 830±10 Mm, Overall Width - 555±10 Mm, Overall Depth = 595±10 Mm. , Providing & Fixing Curtain Set For Windows And Door With Rod And Fitting Complete For Retiring Room, Court Room, Judgement Writer Room, Ahlamd Room, Record Room & Server Room.
