Indian Oil Corporation Limited-IOCL has published Tender For Interior And Exterior Renovation Civil Modification Work Electrical And Plumbing Revamping Supply And Installation Of Hvac Furniture And Allied Works Of Chennai Fst Admin Building Under Tamil Nadu State Office. Submission Date for this Tender is 04-09-2023. Interior Work Tenders in chennai Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | CIVIL WORKS |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material outside premises at an unobjectionable place as per direction of Engineer-in-charge. |
| 3 | i) 1:3:6 or richer mix (i/c equivalent design mix) |
| 4 | Demolishing brick work manually/mechanical means including stacking of serviceable material & disposal of unserviceable material outside premises at an unobjectionable place as / direction of Engg-in-charge |
| 5 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material within premiseslead as directed by Engineer-in-charge. |
| 6 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats,architrave, holdfasts etc. complete and stacking within premises |
| 7 | ii) Of area beyond 3 sq. metres |
| 8 | Dismantling of following electrical fittings / fixtures with all leads and lifts. |
| 9 | i) Electrical cables of all sizes from under / above ground position |
| 10 | iii) 5 to 15A switches/MCBs/plugs |
| 11 | iv) 32/63/100A DP/TPN switches/MCCBs /MCBs |
| 12 | v) Flourescent tube light fittings of all sizes |
| 13 | Dismantling granite slabs / granite tiles / marble slab on wall, floor, pump Island etc., stacking of the serviceable materials and disposal of damaged materials as directed by IOCL including all charges etc. complete |
| 14 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within premises |
| 15 | E/WORK - EX.IN FOUNDN,TRENCHES OR DRAIN Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides & ramming of bottoms, lift upto 1.5 m, including getting out the excavatedsoil & disposalofsurplusexcavatedsoilas directed within or outside the site at an unobjectionable place. |
| 16 | Exc. in All kinds of Soil |
| 17 | Supplying and filling in plinth with sand within specified grading zone of fine aggregates specified in table 3.1, clause 3.1.3 of attached specifications under floors, etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming including watering, consolidating. |
| 18 | Local Coarse Sand withingrading zone II/III |
| 19 | CEMENT CONCRETE (CAST - IN - SITU) Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work up to plinth level : |
| 20 | 1 CEMENT:3 FINE SAND:6 AGG. 40MM |
| 21 | FORM WORK,CENTERNG & SHUTTERING FOR RCC Centering and shuttering including strutting, propping etc. and removal of form for : |
| 22 | i) Foundations,footings,bases of columns, etc. for mass concrete |
| 23 | iv)Lintels, beams plinth beams,girders bressumers and cantilevers |
| 24 | DESIGN MIX RCC Providing and laying in position, machine batched, machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement. including Admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete,improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately). |
| 25 | M25DESIGN MIX RCC UPTO PLINTH |
| 26 | M25DESIGN MIX RCC ABOVE PLINTH -LVL5 |
| 27 | STEEL REINFORCEMENT Supply of Reinforcement for R.C.C. including straightening, cutting, bending, placing in position & binding all complete at all levels |
| 28 | ii)Thermo Mechanically Treated Bars Fe- 500 grade,Conforming to IS1786 |
| 29 | Providing & fixing partition upto ceiling height consisting of G.I. frame & required board including providing & fixing of frame work made of special section power pressed/ roll form GI sheet with zinc coating 120gm/sqm(both side inclusive) consisting of floor and ceiling channel 50mm wide having equal flanges of 32mm & 0.50mm thick fixed to the floor & ceiling at the spacing of 610mm centre to centre with dash fastener of 12.5mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48mm wide having one flange of 34 mm and otherflange 36mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610mm centre to centre by 6mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, Galvanised M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each with Zinc Coating of 120gm/sqm (both sides inclusive) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corner (25 mmx 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture"s specification and direction ofengineer in charge all complete |
| 30 | ii) 75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS:2095: part-I:2011 (Board With BIS Certification Marks). |
| 31 | BRICK WORK Providing and laying Brick work with bricks of class designation 75 Including Scaffolding : |
| 32 | iv) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand)in superstructureABVOE PLINTH & UP TO FLOOR V LEVEL |
| 33 | x) Half brick masonry in Cement mortar 1:4 (1 cement : 4 coarse sand) superstructureABOVE PLINTH & UP TO FLOOR V LEVEL |
| 34 | CEMENT PLASTER WITH FINE SAND Providing and laying cement plaster on surfaces with fine sand including curing etc. |
| 35 | 12MM CEMENT PLASTER,1:4 WITH FINE SAND ( internal walls & ceiling, external sunshade & other projection ) |
| 36 | 20MM CEMENT PLASTER,1:6 WITH FINE SAND ( external walls ) |
| 37 | Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 38 | PAINITNG Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade with 2 or more coats |
| 39 | Finishing walls with Acrylic Smooth exterior paint of required shade (2 or more coat applied @ 1.67 ltr/10 sqm over & including priming coat of exterior Primer applied @ 2.20kg/10 sqm) |
| 40 | 25mm Thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 41 | Providing & laying vitrified floor tile in different sizes (thickness as per manufacturer) with water absorption"s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar as specified with coarse sand jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc. complete for flooring/skirting as specified |
| 42 | i) Flooring with size of Tiles 60x60Cm in cement mortar 1:4 |
| 43 | iii) Skirting with size of Tiles 60x60Cm in Cement mortar 1:3 |
| 44 | Providing & fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (minimum thickness of 5 mm) of approved make in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer-in-Charge in skirting,risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade. |
| 45 | Providing & laying Ceramic Glazed floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) jointing with grey cement slurry@ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc. complete. |
| 46 | Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, sills, facias, Pump Island & similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding & polishing to edge to give high gloss finish etc. complete at all levels. |
| 47 | iii) Granite of any colour and shade having Area of slab upto 0.50 sqm |
| 48 | iv) Granite of any colour and shade having Area of slab over 0.50 sqm |
| 49 | GLOSS FINISH GRANITE STONE FLOORING Stone flooring with 18mm thick Marble/Granite stone (sample of stone shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry including polishing . |
| 50 | vi) Granite stone/ Makrana White second quality in flooring with Gloss Finish |
| 51 | EDGE MOULDING/NOSING Extra for providing edge moulding to 18mm Granite/ marblestone counters,Vanities etc. including machine polishing to edge to give high gloss finishetc.completeasperdesign approvedby Engineer-in- Charge. |
| 52 | ii) Granite work |
| 53 | Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters & similar location in marble/Granite/stone work including necessary holes for pillar taps etc.including rubbing and polishing of cut edges etc.complete |
| 54 | Providing & fixing at all height FALSE CEILING including providing & fixing of frame work made of special sections power pressed from M.S. sheets and galvanised with zinc coating 120gsm/sqm as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm at 1200mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts ,other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length, and with nut and bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9mm running at the spacing of1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the perimeter channels 0.5mm thick 27mm high having flanges of 20mm & 30mm long, the perimeter of ceiling fixed to wall partition with the help of rawl plugs at 450mm centre to centre with 25 mm long drive-all screws @ 230mm interval including jointing & fixing of gypsum board of ceiling section & perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm centre to centre including jointing and finishing to a flush finish of tapered & square edges of the board with recommended jointing compoud. Jointing tapes, finishing with jointing compoud in 3 layers covering upto 150 mm on both sides of joint & 2 coats of primer suitable for board, all as per manufacturer specification and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, complete as per drawing & specification and direction of the Engineer in Charge but excluding the cost of painting with: |
| 55 | ii) 12.5mm thick tapered edge moisture resistant GYPSUM BOARD CONFORMING TO IS: 2095- PART-I |
| 56 | Providing & fixing ISI mark flush door shutters conforming to IS:2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains/cross bands & face veneers on both faces of shutters |
| 57 | i) 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 58 | Providing & fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including black enamelled ISI marked MS pressed butt hinges bright finished of required size with necessary screws |
| 59 | i) 35 mm thick shutters in Second class teak wood |
| 60 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately). |
| 61 | DOOR CLOSER Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete. |
| 62 | DOOR STOPPER Providing and fixing 150 mm bright finished chrome plated brass hanging type floor door stopper with rubber cushion necessary brass screws, etc. complete. To suit shutter thickness complete |
| 63 | Providing & fixing MS grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc.including priming coat with approved steel primer (fixed to steel windows by welding) all complete. |
| 64 | Finishing walls with textured exterior paint of required shade (2 or more coats applied @ 3.28 ltr/10 sqm, over and including priming coat of exterior Primer applied @ 2.20kg/10 sqm) |
| 65 | Supply and Fixing wall panelling made from 50 x 25 mm x 1.2 mm thick Aluminium framework (Jindal / Hindalco / Banco Make) at 600 mmx 600 mm C/Cboth vertically and horizontally covered with 12 mm thick WPC (Wood Polymer Composite Panel) of approved make with 1 mm thick laminate (Formica / Century / Greenlam / Sunmica Make) of approved make finished with groove pattern and design complete as per the approved drawings and instructions of Site in-Charge. |
| 66 | ALUMINIUM COMPOSITE PANEL CALDDING Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in- Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places." |
| 67 | Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: (a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc.gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protectionagainst fire hazard including: (b) Fabricating and supplying serrated M.S. hot dip galvanised /Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural lazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers. (c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass. (d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight. (e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete.This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge. |
| 68 | STRUCTURAL GLAZING Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor.“(Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.26.2)“For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.“ (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical anctioning authority as per the site requirement. |
| 69 | Providing, fabricating and fixing in position stair case railing as perdesign. Blurters of 40mmx12mm MS flat, 900mm high, fixed on alternatetread with Hilty bolts of 12mm nominal dia bolts embedded in treads withhilti chemical fastner 2 Nos. for each Blauster, 12mm dia MS rods 4 Nos.passing through Blausters, hand rail of 60mm dia MS tubes. The hiltybolts and fastner shall be covered with chrome plated cover of regd.Size and approved shape, hand rail fabricated finished with steel primerand two coats of steel paint of regd. Colour and shade (to be approvedby consultants and SMVDIME) finished complete. (Finished slant lengthoffhand railing shall be measured and paid for). |
| 70 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made |
| 71 | Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm.) |
| 72 | Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with : |
| 73 | 4.0 mm thick glass panes |
| 74 | Providing and fixing Full Height laminate finished Plywood Partitionsusing 25 x 50mm aluminum section framework @ 600 c/c bothways with horizontal noggings at floor and soffit, both side skinning with 12mmthick laminate finished Plywood and glass panels with 18mm thk teak wood beading finished with necessary polish. All electrical/network switchboxes, niches to be boxed/packed with adequate reinforcement usingplywood. 12 mm aluminium channel to be provided at intersection of twomaterials. Note cost to include aluminum frame upto actual ceiling(frame to be anchored to actual ceiling). Complete as per drawing and directions.The measurement of the panelling is from FFL upto 6" above the False ceiling.Both side laminate finished partition.(Basic cost of laminates 1800/Sheet 1.5MM thick) |
| 75 | Providing & Fixing of insulated glass hermetically sealed wit 6mm outerclassic hard coated reflective glass and 5mm clear float glass insidewith 12mm dry air cavity between two glass panes separated by a hollowaluminium spacer bar with twin lines of micro holes as approved filledwith molecular desiccant of approved make and using primary hot meldduly and secondary polysulphide or silicon sealant of approved make allcomplete. and openable |
| 76 | CARPET TILES FLOORING Providing & fixing in position of Carpet Tiles asper approved make & shade at existing Floor & Riser: Product type -Tufted Textured Loop, Face Fiber - 100% PP, Pile Height - 3.5 MM, PileWeight : 550g / m2, Total Weight - 3120 g/m2, Gauge - 1/10", PrimaryBacking - Non Woven Polyster Spunbounded , Secondary Backing - PVC withGlass Fiber, Size 50 x 50 cm. |
| 77 | Supply, fixing and installation of Vertical Window blinds of MaterialandMechanism: Made of 100% Polyester Fabric of thickness 0.4 to 0.7mm,Weight of 220 to 425 gms (+/- 5%), Colour Fastness to Light of 5 to 6,of slat width 3.5 to 4.5 inches, of Black out type or Translucent type,installed as per window sizes, operated with a dual or single cord orendless beaded chain system to operate the clutch. The beaded chain or string can be positioned on the left or right side of the blind. The vertical slats have weighing plates inserted with a spacing chain at the bottom. Cleaning Method: Moderate rubbing or wiping with damp cloth with mild detergent |
| 78 | PLUMBING WORKS |
| 79 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white PVC flushing cistern including flush pipe with manually controlled device (handle lever),conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required: (Make:Hindware or Equivalent) |
| 80 | i) W.C. pan with ISI marked white solid plastic seat and lid |
| 81 | Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C.flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required -White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 82 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :(Make:Hindware or Equivalent) |
| 83 | i) White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps |
| 84 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x 265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets,cutting and making good the walls and floors wherever required :(Make:Hindware or Equivalent) |
| 85 | i) One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 86 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required, Kitchen Sink with Drain board(Make:Nirali or Equivalent) |
| 87 | ii) Sink with drain board 510x1040 mm bowl depth 225mm |
| 88 | Providing & fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete |
| 89 | iii) With Flexible pipe of 32 mm dia |
| 90 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 91 | iii) 25 mm nominal bore |
| 92 | Providing and fixing C.P. brass angle valve for basin mixer & geyser points of approved quality conforming to IS:8931 - 15mm nominal bore. |
| 93 | Providing and fixing brass bib cock of approved quality : |
| 94 | i) 15 mm nominal bore |
| 95 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall. |
| 96 | iii) 25 mm nominal outer dia Pipes |
| 97 | iv) 32 mm nominal outer dia Pipes |
| 98 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc. |
| 99 | i) 15 mm nominal outer dia Pipes |
| 100 | ii) 20 mm nominal outer dia Pipes |
| 101 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings.This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work |
| 102 | vii) 62.50 mm nominal inner dia Pipes |
| 103 | ix) 100mm nominal inner dia Pipes |
| 104 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, Single socketed pipes. |
| 105 | ii) 110 mm diameter |
| 106 | Providing and fixingOverhead Shower ø140mm Round Shape Single Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System Jaguar make- Model no OHS-1757 |
| 107 | Providing and fixing Single Lever Wall Mixer with Provision For Overhead Shower with 115mm Long Bend Pipe On Upper Side, Connecting Legs & Wall Flanges Jaguar make- Model no OPP-15117PM |
| 108 | Providing and fixingRectangular shaped urinal partition with frosted glass Glass: 8mm / 10mm Finish: Chrome H: 900 W: 450 Jaquar make- Model No. 1810-US/1810-UC, JSE-CHR-110US450X |
| 109 | Supplying,fixing and testing of UPVC floor trap with cockroach trapand CP grating 150 mm nominal size square 100mm diameter of the innerhinged roundgrating various inlet from 40 dia to110 dia and variousoutlet from 75 dia to 100 dia with the extension pipe,boss teeconnections, fixed in sunken floors /Suspended support with ceilinglevel etc., complete |
| 110 | Providing and fixing Sensor Faucets for wash basin Kubix Prime Sensor Faucet for Wash Basin (Battery Operated) Jaquar Make -Model No SNR-35019PM |
| 111 | Providing and fixing Angular Stop Cock in toilets with Wall Flange Jaquar make- Model no- OPP-15053PM |
| 112 | Providing and fixing Grab bar 300mm Long, Stainless Steel Jaquar make- Model No ACN-1101S |
| 113 | Providing and fixing Towel Ring Round with Round Flange Jaquar make- Model No ACN-1121BN |
| 114 | Providing and fixing Soap Dispenser with Glass Bottle Jaquar make- Model No ACN-1135N |
| 115 | Providing and fixing Swivel Mirror 630 X 445mm Rectangular Shape Jaquar make- Model No AKP-35795 |
| 116 | Providing and fixing Toilet Roll Holder With Flap Jaquar make- Model No AQN-7753 |
| 117 | Providing and fixing Double Coat Hook Jaquar make- Model No AQN-7761 |
| 118 | Providing and fixing Hand Shower for WC specifications : Hand Shower ((Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook Jaquar make- Model No ALD-565 |
| 119 | Providing and fixingWC in Location In charge Toilets Specifications: Rimless, Blind Installation Wall Hung WC with UF soft close slim seat cover, Hinges, Accessories set ec complete Size : 360x500x300 mm Jaquar make- Model No -KUBIX Wall Hung WC (White Matt) KUS-WHM-35953BIUFSM |
| 120 | Providing and fixingUnder Counter Basin with Fixing Accessories, Size: 485x370x205 mm, Shape: Rectangular Jaquar make- Model No CNS-WHT-701 |
| 121 | Providing and fixing Urinal without sensor with Fixing Accessories Set, Size: 480x300x740mm Jaquar make- Model No URS-WHT-13255 |
| 122 | Providing and fixingSoap Dispenser in Location incharge toilets - Automaticcapacity: 0.8L material: aluminium/ABS finish: chrome/black Jaquar make- Model No SDR-BLC-DJ0160AS |
| 123 | Providing and fixing Flushing Cistern with following Specifications: Single Piece Concealed Cistern Body (Front or Top Actuation) with Floor Mounting Frame ,Installation Kit and “P-Type” Drain ,Pipe Connection Set for Wall Hung WC (with all fittings and fixtures complete. (Flush tank should have dual flushing system 4/2 LPF) Jaquar make- Model No -JCS-WHT-2431FP |
| 124 | Providing and fixing Flushing valve Jaquar make Control Plate Kubix Jaquar make- Model No "JCP-CHR-352415 |
| 125 | ELECTRICAL WORKS |
| 126 | Dismantling of monolith front, back, side panels, logo, light fittings, cables etc all items complete and stacking the materials at safe place within retail outlet premises. |
| 127 | SUPPLY & LAYING FOR SUB-MAIN/POWER WIRING Supplying, drawing sub-main/power wiring with PVC insulated Copper 1100 V grade FRLS type through heavy duty rigid PVC conduit either on wall or in concealed. The job include terminations at both ends through proper jointing materials all complete for the following. Make of Insulated wires shall be as per approved make |
| 128 | Sub-main/power wiring with PVC insulated Copper wire of 2 x 1.5 sq mm + 1 x 1.5 sq mm earth wire, as per specifications and direction of Engineer in Charge. |
| 129 | Sub-main/power wiring with PVC insulated Copper wire of 2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire, as per specifications and direction of Engineer in Charge. |
| 130 | Sub-main/power wiring with PVC insulated Copper wire of 2 x 4 sq mm + 1 x 4 sq mm earth wire, as per specifications and direction of Engineer in Charge. |
| 131 | SUPPLYING & FIXING MODULAR SWITCH FRAME SWITCHES, FUSES, MCBS, ELCBS ETC Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per following details of approved includingflush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer"s specification and direction of Engineer In-charge. |
| 132 | S/F modular switch frame with 2 module frame, as per specifications and direction of Engineer in Charge. |
| 133 | S/F modular switch frame with 3 module frame, as per specifications and direction of Engineer in Charge. |
| 134 | S/F modular switch frame with 4 module frame, as per specifications and direction of Engineer in Charge. |
| 135 | S/F modular switch frame with 6 module frame, as per specifications and direction of Engineer in Charge. |
| 136 | S/F modular switch frame with 8 module frame, as per specifications and direction of Engineer in Charge. |
| 137 | SWITCHES, FUSES, MCBS, ELCBS ETC Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per following details of approved including flush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer"s specification and direction of Engineer In-charge. |
| 138 | S&F 6A MODULAR TYPE SWITCH |
| 139 | S&F 6A, PANIO TYPE 3 PIN SOCKET |
| 140 | S&F 15 A MODULARTYPE SWITCH |
| 141 | S&F 15 AMODULAR TYPE 6 PIN SOCKET |
| 142 | S/F modular switch frame with Fan Regulator of stepped modular type, as per specifications and direction of Engineer in Charge. |
| 143 | S & F CEILING FAN Supply & fixing of ceiling fan for inside of the sales building of following type: |
| 144 | i) 1200 MM Sweep wall mounted fan |
| 145 | S & F EXHAUST FAN Supply and fixing of Exhaust fan including electrical wiring all shall be with per specification and direction of site In charge. The fans shall be with louvers / shutters. (The job does notinclude making suitable cut out in thewall for fixing the fan). |
| 146 | S&I 12" HEAVY DUTY EXHAUST FAN, make GEC or equivalent |
| 147 | Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 18 Watts with fittings and accessories, having IP65 protection class with Pressure Die CCast LM6/ADC12/LM24 housing and with toughened glass or UV stabilized polycarbonate cover type of approved make or equivalent as per direction of Engineer-in-charge. The LED driver shall have an in-built high voltage cutoff >= 290V with power factor of complete fitting greater than 0.90. CCT (Correlated Colour temperature) shall be in the range of 5665 K +/- 355 K as per ANSI standard C78.377, CRI (Colour rendering index) should include all colour range from R1 to R15 and > 70 for outdoor luminaire. LED efficacy shall be greater than 140 lumens/watt @ 350mA drive current. The minimum system lumen efficacy of the luminaire shall be 100 Lumens per Watt. The Surge Protection Device (SPD) should be series type with fail safe, surge protection for minimum 3kV shall be provided. Supply of complete fitting with all accessories as per specification attached and as per direction of engineer in charge. Each lot of fittings shall accompany test certificates LM79/ IS:16106 and reference/ batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of minimum 60 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminaire etc. (Approved make Philips or Equivalent make) |
| 148 | Supply and installation of MCB distribution boardhaving Doubledoorcomplete with tinned cu bus bar, neutral bus bar, earth bar, din bar, interconnection, earthing etc. withoutincoming isolator and MCBs |
| 149 | LDB-1 & 2 |
| 150 | iv) 4 way (4+12)TPN |
| 151 | Incomer: |
| 152 | MINIATURE CIRCUIT BREAKERS (MCB) Supplying & fixing of Miniature Circuit Breakers as per approved make of 10KA Breaking cpacity of following ratings |
| 153 | v) 40A FP MCB |
| 154 | v) 40A FP MCB |
| 155 | Sub-Incomer: |
| 156 | Supply & fixing of 300mA RCCB of approved Make of following ratings: |
| 157 | i) 2 poles, 25A |
| 158 | Outgoings: |
| 159 | i) 6A to 32A SP MCB |
| 160 | ELDB-1 & 2 |
| 161 | iv) 4 way (4+12)TPN |
| 162 | Incomer: |
| 163 | v) 40A FP MCB |
| 164 | Sub-Incomer: |
| 165 | i) 2 poles, 25A |
| 166 | Outgoings: |
| 167 | i) 6A to 32A SP MCB |
| 168 | MCB DISTRIBUTION BOARD INCLUSIVE OF 3- PHASE MCB Supply & fixing of MCB Distribution Board double door type inclusive ofMCB, Three Phase, as per Approved Make of following types: (MCB - 10KA Breaking Capacity) |
| 169 | UPSDB-1 |
| 170 | vi) 8 way (4+24) TPN |
| 171 | Incomer: |
| 172 | v) 4 poles, 63A |
| 173 | Outgoings: |
| 174 | iv) 32A TPN MCB |
| 175 | 20A SP MCB,10kA |
| 176 | MCB DISTRIBUTION BOARD INCLUSIVE OF 3- PHASE MCB Supply & fixing of MCB Distribution Board double door type inclusive ofMCB, Three Phase, as per Approved Make of following types: (MCB - 10KA Breaking Capacity) |
| 177 | SPDB-1 |
| 178 | vi) 8 way (4+24) TPN |
| 179 | Incomer: |
| 180 | iii) 100Amp |
| 181 | Outgoings: |
| 182 | iv) 32A TPN MCB |
| 183 | 25A SP MCB,10kA |
| 184 | SPDB-2 & ACPDB-1 |
| 185 | v) 6 way (4+18) TPN |
| 186 | Incomer: |
| 187 | ii) 63 Amp |
| 188 | Outgoings: |
| 189 | iv) 32A TPN MCB |
| 190 | 20A SP MCB,10kA |
| 191 | v) Supply and fixing63Amp 4 pole MCBon suitable plastic box on surface or recess. |
| 192 | Supplying, fabricating and installing following sizes of perforated GI cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling and/or fix to steel/RCC columns, beams or any other structure members with MS suspenders, angles, channels, etc complete as per the direction of IndianOil |
| 193 | ii) 150mm x 25mm x 2mm |
| 194 | Supply & drawing/laying, jointing, connecting, testing and commissioning ofearth strip/copper strip/GI wire for earthing and lightning protection under or aboveground complete as per specification for the following : |
| 195 | iii) 50 x 6 mm G.I. Strip |
| 196 | ix) 6 S.W.G. Cu. Wire |
| 197 | xiii) 25 x 5 mm Cu. Strip |
| 198 | Chemical Earthing with Copper Bonded Rod suitable for current carrying capacity of 15kA for 1 second - Supply of chemical earthing Cu Bonded High Tensile Low Carbon Steel Rod of dia not less than 17mm electrode complying to UL 467 Requirements & suitable for current carrying capacity of 15kA for 1 second, exothermic welded & 3Mtr long |
| 199 | Supply of chemical earthing technology (pipe in pipe) for Electrode Design of specified Current Carrying Capacity in kA for 1 second. Crystaline Conductive mixture which is machine pressed in the pipes should not disintegrade or collapse when the outer pipe corrodes. Resistivity of the Material shall be less than 0.2ohm meter when tested by making a 20cm Cube of the Material & checking the resistance across the opposite faces of the cube. Necessary Test certificate shall be submitted. Concentric Earth Electrode Pipe should be MS of IS:1239 quality & hot Dip galvanised of 150 micron. Electrode Material Selection should be as per Clause 9.3: IS-3043. |
| 200 | iv) Current Capacity:50kA Primary Conductor(Inner pipe dia-40NB; Electrode Outer Pipe Dia-100NB Length of Concentric Pipes:3M |
| 201 | Supplying, Installation,Testing & Commissioning of Recessed mounted LED down light fittings with 1x15 W GREEN LED ULTIMA of Philips / Smart light (SC-113) or approved equivalent make. |
| 202 | Supplying, Installation,Testing & Commissioning of Recessed mounted LED down light fittings with 1x12 W GREEN LED ULTIMA Square of Philips / Smart light (SRD-12W) or approved equivalent make. |
| 203 | LED STRIP: Supply, installation, testing & commissioning of LED Strip Light (14.4 W / Meter ) Philips or (SL- 510 of Smart light or Equivalent.] |
| 204 | Supplying , Installation,Testing and Commissioning of Recessed mounted LED luminiaire Fullglow RC 380B LED 295-6500 G3 PSD of Philips or approved equivalent make .GREEN LED ULTIMA -32 W-600X600 |
| 205 | Supply of Heavy Duty UPVC Conduits long with supply of bends, tees, couplers, pull boxes, GI pulling wires end caps, sealing bell mouths, JB, sockets, sealing of ends, clamping, saddles, spacers, wall plug, screws, bolts, nuts as necessary as required of following types & sizes. : |
| 206 | 25 mm dia Heavy Duty UPVC concealed conduit |
| 207 | 32 mm dia Heavy Duty UPVC concealed conduit |
| 208 | 3W LED Spot light |
| 209 | 7W LED Spot light |
| 210 | ELV WORKS |
| 211 | Providing following point wiring with standard wire/ cable, plug, fittings, with suitable sockets, suitable GI box with front plate etc. complete, to include circuits from distribution boards to individual point boards, suitable PVC casing capping and required accessories pulling of wires, etc. complete. |
| 212 | Supplying and drawing following 2 pair 0.5 sq mm FR PVC insulated annealed copper conductor, unarmuored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 213 | Supply & laying of CAT 6 network cable of approved make |
| 214 | S/F modular switch frame with 2 Pin Telephone Modular Socket, as per specifications and direction of Engineer in Charge. |
| 215 | Communique telephone Jack RJ 11 - 2 lines including front plate (D-Link) |
| 216 | Supplying ,wiring & connecting 5 pair Telephone cable including PVC conduit (D- Link) |
| 217 | Wireless IP-EPABEX -Excgnage mini panel for 500 lines |
| 218 | IP-PHONE WITH SPEAKER AND CLI |
| 219 | IP COARDLESS PHONE WITH CLI SPEAKER |
| 220 | Sypply & laying of LAN cable ( Cat-6) (D-Link) |
| 221 | Supply and delivery of HDMI pro cable- 50 feet Approved Make: Kramer/Crestron/ Extron Model: Kramer C-HM/HM/Pro-50 or equivalent |
| 222 | Microprocessor based intelligent addressable Fire Alarm Control Panel with LCD display, keypad, built-in battery charger etc, meeting all technical requirements as given in the specification and necessary interface units for voice communication facilities for emergency broadcasting and including SMF batteries and having loops capacity of 2 loops with necessary relay modules, Network card, RS232 port. Provision for integrating with FACP panel of Main Plant Package with necessary support. Licensed operating software (dongle or any other form) of FDA panel with necessary training as required is also to be considered in the scope for future maintenance by the user. |
| 223 | Microprocessor based intelligent addressable Analog fixed temp.cum rate of rise type heat detector with LED indication for healthy fault and fire condition. |
| 224 | Microprocessor based Intelligent addressable Analog type photoelectric smoke detector working on light scattering principle and having LED indication for healthy fault and fire condition. |
| 225 | Manual Call Point - Chain & Hammer or Pull Station with in-built Addressable module suitable for indoor/outdoor application including lock & key enclosure. |
| 226 | RED LED remote response indicator enclosed in tough plastic, M.S sheet 2mm thick painted with fire red paint & inscription as “FIRE” on acrylic sheet. |
| 227 | Built-in addressable Fault Isolation Modules. |
| 228 | Operator HMI station PC based with required data communication link with FAP panel and necessary licensed software. Specifications as per TS |
| 229 | Graphical interface software for FDA system with license |
| 230 | Desk for mounting PC HMI, monitor, keyboard, mouse and power sockets along with strain relieving type height adjustable, wheel base chair |
| 231 | Self-illuminous “Fire Exit” sign boards. |
| 232 | Dual frequency electronic hooter, sounder without volume control, with addressing module & loop powered to hooter. |
| 233 | Provision of Battery for UPS Exide 12V 42AH including battery Rack |
| 234 | Provision of water cooler 80 L cum Purifire |
| 235 | Supply & installation of 215 cm (85") LED Television of Sony Make : Model No.: KD-85X85J or equivalent as approved by IOCL and as per tender specifications |
| 236 | Supply & installation of 139 cm (55") LED Television of Sony Make : Model No.: KD-55X85J or equivalent as approved by IOCL and as per tender specifications |
| 237 | AC SYSTEM |
| 238 | HIWALL SPLIT UNIT Supply & fixing of air conditioners 1.5 TR Split AC Approved makeVoltas, Samsung,LG,Blue Star.1.)Star rating : 5 Star 2) Cooling Capacity(KW/hr): above 3000KW/hr 3)Compressor Type: Rotary type 4 )Compressor warranty: 5 years 5) Aircirculation(CFM H/M/L): above 450/350/300 6 Miosture Removal(L/hr):above 1.5 7 IDU Noise level(dBA) : ? 55/50/45 8 Control : Microprocessor controlled codeless remote 9 Power Source (V/Hz/Ø) : 230/50/1 10 Display: LED/LCD 11 Remote control distance : Min 10 meters Voltage StabilizerVoltage Stabilizer 12 Voltage Stabilizer Wall mount type with Time delay,High& low voltage& Thermal overload protection. 13 Capacity: 4 KVA 14Warranty: 2 years 15 Input voltage: 130-300 V 16 Output Voltage :200-240 V 17 High Voltage Cut Off : 240 18 Efficiency: >95% 19 Frequency: 50Hz Equipment shall be supplied along with : Equipment shall besupplied along with : 1 4 mtr copper piping with superlon insulation for suction line 2 4 mtr copper piping with superlon insulation forDischarge line 3 1 mtr PVC piping for drain 4 Indoor - Outdoor unitconnecting power cable and required cable from power socket tostabilizer and from stabilizer to AC Unit 5 Base plate for hangingindoor unit |
| 239 | FURNITURE |
| 240 | Supply of Prime High Back Chair Fabric, Black brand : godrej Product Dimension : W x H x D (cm) 76.1 x 98-108 x 76.1, Seat Height (cm)45.5-55.5, Finish ColorBlack Net Weight(kg)17.5,Upholstery Material Fabric" |
| 241 | Supply of Prime medium Back Chair Fabric, Black brand : godrej Product Dimensions W x H x D (cm)70 x 105.5 x 70,Seat Height (cm)53.8,ColorBlack, Net Weight (kg)15.8,Primary MaterialMild Steel,Upholstery |
| 242 | Providing & Fixing of workers restroom cot |
| 243 | Supply and installation ofCafé foldable Tables for Cafeteria /Dining area ofFeatherlitemake (ModelNo CAFE FOLDABLE Table) * Size : 1200mm x 800mm x 740mm * Stainless Steel Legs * Foldable Table (Model No.: CAFE FOLDABLE TABLE of FEATHERLITE) |
| 244 | Supply and Installation of Cafe Chairs for diningarea/ cafeteria. * Stackable Chair * Powdercoated Legs * Can be ganged for straight line. * Colour : Black (Model No.: GENIUS of FEATHERLITE) |
| 245 | Supply and installation of Sofa ( single seater) with Ergonomic Back Support, Soft Touch Fine Finish, Durable Fabric of Godrej Make. The frame structure is made up of moisture, termite and borer resistane plywood. The spring assembly is attached on this plywood frame for additional cushioning purpose. The fabric used should have features like wear & tear resistance,colour fastness, high durability, soft touch and fine finish. Width: 860mm, Depth 905mm, Height 855mm, Seat Height 450mm. (Model No- Pisa One Seater of Godrej ) |
| 246 | Supply and installation of Sofa ( Two seater) with Ergonomic Back Support, Soft Touch Fine Finish, Durable Fabric of Godrej Make. The frame structure is made up of moisture, termite and borer resistane plywood. The spring assembly is attached on this plywood frame for additional cushioning purpose. The fabric used should have features like wear & tear resistance,colour fastness, high durability, soft touch and fine finish. Width: 1460mm, Depth 905mm, Height 855mm, Seat Height 450mm. (Model No- Pisa TwoSeater of Godrej ) |
| 247 | Supply and installation of Sofa ( Three seater) with Ergonomic Back Support, Soft Touch Fine Finish, Durable Fabric of Godrej Make. The frame structure is made up of moisture, termite and borer resistane plywood. The spring assembly is attached on this plywood frame for additional cushioning purpose. The fabric used should have features like wear & tear resistance,colour fastness, high durability, soft touch and fine finish. Width: 2060mm, Depth 905mm, Height 855mm, Seat Height 450mm. (Model No- Pisa Three Seater of Godrej ) |
| 248 | Supplyand installation ofMedium Back Mesh Chair with Headrestof Featherlite makewith Dynaflex Back Support, Pneumatic Gaslift,Cushioned Seat, Multilock Mechanism, Height Adjustable Arms, Nylon Base (Model No.: LIBERATE HB of FEATHERLITE) |
| 249 | Supplyand installation of Medium Back Mesh Chair for workstations and training room of Featherlite makewith Dynaflex Back Support, Pneumatic Gaslift, Cushioned Seat, Multilock Mechanism, Height Adjustable Arms, Nylon Base (Model No.: LIBERATE MB of FEATHERLITE) |
| 250 | Supply & Fixing of General manager Table1.Storage:-Made out of top 25 mm thick particle board and 1 mm laminate.Bottom legs, back board and shelfs are 18 mm thick prelaminated particleboard.2.Tables:-Made out of table top 25 mm thick particle board and 1 mm laminate.Legmade of 2 x 2 MS tupe with Powder coated finish.Modesty18mm thick particle board and 1mm Laminated finish with 2mm PVC edgebinding.Size: 7"0"x 3"0" x 2"6"Size: 3"6" x 1"6" x 2"6" |
| 251 | Providing and Placing in position Storage units of size as per direction of Site in-Charge with fire retardant Ply Board of 19mm thick for Front/Side/Top Panels & internal shelves andand 12mm thick for rear side panel, finshed with 1mm thick Laminate (of approved make and Shade on all faces of 18mm thick Ply baord), all as per approved design drawing.Item to include preperation of sample unit approval from Site in-Charge. All edges shall have beading of water based PU polished and stained good grade. Hardware shall be of SS 304 grade Butter Finished hardware of handles, mortise locks, clip lock, key holes etc. as approved by IOCL and inclusive of slider racks, tools and tackles, material, finished installed cleaned complete. Item to be complete in all respect as per approved drawings and instruction from Site in-Charge. MAKE: SONEAR LTW+ZERO FLAME PLY, AMULYA FIRE RETARDANT PLYWOOD, DURO FIRESHIELD PLYWOOD OR AS PER APPROVAL BY IOCL LAMINATE MAKE: SONEAR, AMULYA, DURO OR AS PER APPROVAL BY IOCL. Note: 1) Only shutter dimension shall be measured for payment. 2) Wood used should be FSC certified wood or composite wood material. |
| 252 | Supply and installation ofExecutive Desk for Cubicals withfollowing Specifications *Main desk - W1800mm x D800mm x H 780mm (WxDxH) * Side table – 1000mmX500mmX780mm (WxDxH) * The side table shall have one door and open shelves. *The other side of the table shall have 3 drawers with central locking system. *Table top: shall be made of 48mm pre laminated board with 2mm PVC edge band all around. *All other panels (Shelf, back, door, side): shall be made of 16mm thick pre laminated board with 2mm PVC edge band all around. (Model No.: SENATE HT-528 of Featherlite) |
| 253 | Supply and installation ofWorkstations ofGodrej makewith Storage Drawer ,CPU Holder and Provision For 3 Power,2 Lan and 1 Telephone points. Specifications: Size: Size - 1500mmW1 x 1500mmW2 x 600mmD x 750mmH PEDESTAL - FREE STANDING FULL HT - 390mm X 435mm X 646mm , KEY BOARD TRAY - Metal with mouse tray Cpu Trolley (Model No.: PENTA WORKSTATION [WISH] - OPOS of Godrej) |
| 254 | Supply and installation of Talk Modular Mingle Conference Table _14 Seater (MakeGodrej) Specification : Worksurface (Membrane) Top thickness 25mm Thick ±1.5mm (15mm+10mm MDFAs per IS 12406 + 0.4mm ) Membrane foil and balancing Laminate on bottomsurface.Legs Made from 1.6 mm Matt Silver Anodized Aluminium Extrusion. LegAssembled together with a plastic holder at bottom and 5 mm HR steel(IS:2062) which is powder coated (DFT 40-60 Microns).The Plastic glide holder is having provision for wire entry and glidefixing . The wire carrying is facilitated through the hollow spacebetween two leg extrusions and the wires are concealed between removablerigid PVCxtrusion in the Leg.Veil & Cross Members Made from 18mm Thick PLT ±lmm as per IS -12823 andPVC edge banding on all the sides.Access Flap & Switch Mounting Tray Made from Matt silver AnodizedAluminium extrusion and plastic moulded components to facilitate access of Electrical/Data/Voice sockets access from top. Powder coated (DFT40-60 Microns) switch mounting tray made from 0.8/1.2 mm CRteelIS-513.Switches to be mounted on tray as per requirement .Provision for mounting 8-module Anchor Roma switch plate onswitch- ounting tray. Products certifications like: BIFMA level 2 conforms to ANSI/BIFMAe3-2014e Furniture Sustainability Standard issued by BIFMA. Othercertificates include ISO 9001:2015, ISO 14001:2015, ISO 50001:2011,OHSAS 18001:2007. All the ISO certificates are obtained from NABCB(Central Govt) accredited organization. Use Of Green Echo material " |
| 255 | Supply and installation of Reception Table- First Impression ( With 2 Arc) : "Table Top- Clean matt PU finish 18mm thick Inside radius 700.0 mm Outside radius # 1350.0 mm Depth # 650 mm.Rubberized cork # 18mmthick.Frosted Glass 10mm thick Diamond cut finishing on edges, InsideRadius # 1202.5mm Outside radius # 1402.5mm Depth # 200mm.Modesty Panel- MS Perforated sheet. Below Worksurface : 0.8 mm (thick) x665.0 mm (height) x 1345.0 mm (flat length). Above Worksurface : 0.8mm(Thick) x 260 mm (height) x 1345.0 mm (flat length).Legs- MS tube 1.6 mm thick Diameter 50.8 mmHeight 604 mm. Godrej has in house quality checking, steel processing and powder coating units" |
| 256 | Supply and installation of corner Table Godrej make -Dimensions (in cm) Width60, Depth 60 Height 54.5 (Model No- Top Corner Table of Godrej Make) |
| 257 | Supply and installation ofTableof Size112cm W x60cm Dx 34.9cm height (Model No- Pisa CoffeeTable of Godrej Make) |
| 258 | Supply and installationof Godrej Make storage cupboard with size1981mm H x 916mm W x 486mm D of below specifications: (Model No- Storwel Plain of Godrej Make) |
| 259 | "Supply and installation offile Storage Racks of size Godrej make 1830mmH x 900mmW x 450mmD (Model No.: VSDU - 8 Storage Rack of GODREJ) " |
| 260 | HVAC SYSTEM |
| 261 | Supply installation testing and Commissioning of modular type Variable refrigerant,Flow/variable Refrigerant volume air cooled outdoor units suitable for cooling and heating,having all hermitically sealed inverter type scrool compressor(S),minimum two compressor for above 14HP modules,microprocessor based controller,top discharge type condesing unit(s),with R410 A refrigerant,vibration isolators,with suiatable foundations etc,complete as pe required.The unit shall deliver the rated capacity at AHRI Conditions and work even at 50C ambinent temperature without tripping.The unit shall be suitable to work on 400V 10% 3 phase,50Hz Ac power supply.The unit shall be filled with first charge of rerigirant and ready for use as required.The COP at AHRI Conditions shall not be less than 3.1 and IEER not less than 6.5 |
| 262 | Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. |
| 263 | 1.00 TR, 265cfm |
| 264 | 2.0 TR, 582cfm |
| 265 | 2.40 TR, 582cfm |
| 266 | 3.20 TR, 1147cfm |
| 267 | 4.00 TR, 1147cfm |
| 268 | Supply, installation, testing and commissioning of following minimum capacity VRV/VRF High wall type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cord less remote control, drain pan, necessary accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. |
| 269 | 2TR |
| 270 | Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : |
| 271 | 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation |
| 272 | 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 273 | 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 274 | 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 275 | 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 276 | 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19mm thick insulation |
| 277 | 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 278 | 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 279 | DRAIN PIPING : Supply, installation and commissioning ofheavy duty PVC Drain piping with 6mm thick Closed Cell Nitrile rubber insulation (Class-O) (Make: Finolex or Equivalent) |
| 280 | 25 mm dia |
| 281 | 32 mm dia |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
