Tender For Supply Of 5 Hp Complete Solar Water Pumping System With Installation At 3 Villages In Nawabganj Block District Bahraich, 5 Villages In Sidhauli Block, Sitapur, And 4 Villages In Nakaha Block, Lakhimpur, Uttar Pradesh. 1 5 HP complete solar water pumping system with installation. (Solar Panel with mounting structure) Pumps- Submersible pump, controller, Panel, pumps and VFD Drive and with water flow meter with installation Item 1: PV array: 5360 W, (Each panel capacity of 335 W and a total of 16 panels). Solar Panel (IEC/6125, IEC/61730) IEC tested Panel Module Efficiency minimum 14%, Fill factor more than 70% Photo Voltic-Cell efficiency minimum 16% PV module must be warranted with output wattage which should not be less than 90% at the end of ten years and 80% at the end of 25 years. Panel should be Make: TATA Power Solar Item 2: (Part of Solar Panel): Terminal box on the mold should be designed for long life outdoor operation in harsh environment should be a provision for opening for replacing the cable if required. At least 5 years warranty and free replacement in manufacturing defects. The offer PV module along with its terminal box shall be authorized by/certified by MNRE authorized test center with appropriate certificate. Item 3: Mount MS Hot dipped Galvanized iron with minimum 80 Micron thickness or dipped at-least three times with certificate and manual tracking facilities. The mount should be installed on RCC platform with adequate width must be at least 3 feet below the earth surface and 6 feet above the earth surface. Panel mounted must be tied with anti-theft bolts. Make: Hot Dip Galvanized Item 4: VFD Drive: (5H.P 3 Phase with MPPT and IP54 protection) with lock box, Make: Shakti Pumps Ltd. Item 5: Submersible pump: 5 Hp, Head: 20 m, Output: 90 mm, Discharge: More the 3.5 lakh liter/day, Body type: SS, Power: DC, with at least 5 years warranty and full replacement in manufacturing defect, Make: Shakti Pumps Ltd. Item 6: Column pipe: HDPE pipe of 6 kg/cm2 size 90 mm ODPE 100 grade of 20 meter length, Make: ISI Mark, (with 1.5 meter Iron head). Item 7: Safety gears: lighting arrestor, GI cable, make: ISI Mark or As per standard Item 8: Other fittings required: pipe and fittings etc. with complete installation, Make: ISI Mark or as per standard. Item 9: Magnetic Water flow, water inlet and outlet 100 mm, Water flow meter - Cubic meter, working pressure greater than equal to 6 Mpa. Item 10 : AMC : with 5 years, Regular field visits as per need to maintenance & repair of the solar pump systems. 2 5 HP complete solar water pumping system with installation. (Solar Panel with mounting structure) Pumps- Submersible pump, controller, Panel, pumps and VFD Drive and with Water flow meter with installation Item 1: PV array: 5360 W(Each panel capacity of 335 W and a total of 16 panels), Solar Panel (IEC/6125, IEC/61730) IEC tested Panel Module Efficiency minimum 14%, Fill factor more than 70% Photo Voltic-Cell efficiency minimum 16% PV module must be warranted with output wattage which should not be less than 90% at the end of ten years and 80% at the end of 25 years. Panel should be Make: TATA Power Solar Item 2 ( Part of Solar Panel): Terminal box on the mold should be designed for long life outdoor operation in harsh environment should be a provision for opening for replacing the cable if required. At least 5 years warranty and free replacement in manufacturing defects. The offer PV module along with its terminal box shall be authorized by/certified by MNRE authorized test center with appropriate certificate. Item 3: Mount MS Hot dipped Galvanized iron with minimum 80 Micron thickness or dipped at-least three times with certificate and manual tracking facilities. The mount should be installed on RCC platform with adequate width must be at-least 3 feet below the earth surface and 6 feet above the earth surface. Panel mounted must be tied with anti-theft bolts. Make: Hot Dip Galvanized Item 4: VFD Drive : (5H.P 3 Phase with MPPT and IP54 protection) with lock box , Make: Shakti Pumps Ltd. Item 5: Submersible pump: 5 Hp, Head: 20 m, Output: 90 mm, Discharge: More the 3.5 lakh liter/day, Body type: SS, Power: AC, with at least 5 years warranty and full replacement in manufacturing defect, Make: Shakti Pumps Ltd. Item 6: Column pipe: HDPE pipe of 6 kg/cm2 size 90 mm ODPE 100 grade of 20 meter length, Make: ISI Mark, (with 1.5 meter Iron head) Item 7: Safety gears: lighting arrestor, GI cable, Make: ISI Mark or As per standard Item 8: Other fitting required: pipe and fittings etc with complete installation, Make: ISI Mark or As per standard. Item 9: Magnetic Water flow, water inlet and out let 100 mm, Water flow meter - Cubic meter, Woking pressure greater than equal to 6 Mpa. Item 10 : AMC: with 5 years, Regular field visits as per need to the maintenance & repair of the solar pump systems.
