Military Engineer Services-MES has published Tender For Repair/Maintenance/Rescanning And Polishing Of Wooden Furniture Items Under Ge (I) Kanpur. Submission Date for this Tender is 04-09-2023. Wooden Furniture Tenders in kanpur Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 21-Aug-2023 | Other Corr_1 | Other | 28-08-2023 |
| 2 | 28-Aug-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 04-09-2023 |
| Sl. No. | Item Description |
| 1 | Chair Dining FD-1105/279 S&F new components of 2nd class HW (shisham) including dismantling unservicable oneall as specified and as directed. (a) Rear leg |
| 2 | (b) Front leg |
| 3 | (c) Rear/front/side rail |
| 4 | (d) Stiffener |
| 5 | (e)Back rest |
| 6 | (f) S & F recanningin "Godrej" pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable oneall as specified and as directed. |
| 7 | (g) Preparation of sufaces by throughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing two coats with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs after removing old buffers all as specified and directed. |
| 8 | Chair Easy FD-1108/229 S&F new components of 2nd class HW (shisham) including dismantling unservicable oneall as specified and as directed. (a) Rear leg |
| 9 | (b) Front leg |
| 10 | (c) Arms |
| 11 | (d) Front/back/Side rail of seat as to match with the existing, made of shisham wood all as specified and directed |
| 12 | (e) S & F recanning seat & backin "Godrej" pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for bordersincluding dismantling unserviceable oneall as specified and as directed. |
| 13 | (f) Preparation of sufaces by throughly rubbing with emery paper, applying raw/burnt seina uniformlyand polishing two coats with french polish with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified & directed. |
| 14 | Chair writing FD-202/ 250/280 S&F new components of 2nd class HW (shisham) including dismantling unservicable oneall as specified and as directed. (a) Rear leg |
| 15 | (b) Front leg |
| 16 | (c)Rear/front/Side rail |
| 17 | (d)Arms. |
| 18 | (e) Back rest |
| 19 | (f) Stiffener |
| 20 | (g) S & F recanningseat & back of the chairand recanning in "Godrej" pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for bordersincluding dismantling unserviceable oneall as specified and as directed. |
| 21 | (h) Preparation of sufaces by throughly rubbing with emery paper, applying raw/burnt seina uniformlyand polishing two coats with french polish with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified and directed. |
| 22 | Bed plywood top FD-245 & 246 S&F new componentscomprising of following outer member made of shisham wood and internal frame made of cheer wood, covered both sides ofboard with 3.5 mm thick OST plywoodwith 12mm thick half cut teak wood beading including dismantling unservicable oneall as specified and as directed. (a) Head board |
| 23 | (b) Foot board |
| 24 | (c ) S & F new teak plywoodof head board on both sidesalong with 30mm x 6mm teakwood beading on top including dismantling unserviceable one all as specified and as directed. |
| 25 | (d ) S & F new teak plywoodof foot board on both sides along with 30mm x 6mm teakwood beading on top including dismantling unserviceable one all as specified and as directed. |
| 26 | (e )S&F new components of 2nd class HW (shisham) including dismantling unservicable oneall as specified and as directed. (a) Long rail of size 90 x 35 mm |
| 27 | (f) Stiffner of size 60 x 40 mm |
| 28 | (g) Wooden bracket (corner) |
| 29 | (h) S&F top made of 12mm BWR phenol bonded commercial plywood with suitable screwsincluding dismantling unservicable oneall as specified and as directed. Make of Ply : Archidply/century/Greenply. |
| 30 | (j) preparation of the surfaces by throughly rubbing with emery paperboth surfaces of the head board, foot board including legs and long rails and polishing with french polish two coats to obtain a glossy finish complete all as specified and as directed. |
| 31 | Table dining for 08 personsFD-30(M)/ 273 & 239 S&F new components of 2nd class HW (shisham) including dismantling unservicable oneall as specified and as directed. (a) Leg |
| 32 | (b) Top rail (long/front) |
| 33 | (c) Top rail (short/side) |
| 34 | (d) Top made ofpre-laminated MDF board exterior grade 18mm thick post-formed with 0.6 mm thick laminated in Mohigni/Walnut colour/shade as approved by Engr-in-Charge with 2 mm thick PVC edging of Make : Rehau/Pegasus/Kynes shall be fixed on two sides it complete with strong bonded chemical adhesive through hot pressed machine all as specified in drg and as directed by Engr-in-Charge. |
| 35 | (e) Preparation of surfaces with sand/emery paper and applying french polish two coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed. |
| 36 | Table dining for 06 personsFD-30(M)/ 273 & 239 S&F new components of 2nd class HW (shisham) including dismantling unservicable oneall as specified and as directed. (a) Leg |
| 37 | (b) Top rail (long/front) |
| 38 | (c) Top rail (short/side) |
| 39 | (d) Top made ofpre-laminated MDF board exterior grade 18mm thick post-formed with 0.6 mm thick laminated in Mohigni/Walnut colour/shade as approved by Engr-in-Charge with 2 mm thick PVC edging of Make : Rehau/Pegasus/Kynes shall be fixed on two sides it complete with strong bonded chemical adhesive through hot pressed machine all as specified in drg and as directed by Engr-in-Charge. |
| 40 | (e) Preparation of surfaces with sand/emery paper and applying french polish two coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed. |
| 41 | TeapoyFD-382/ 232 & 278 S&F new components of 2nd class HW (shisham) including dismantling unservicable oneall as specified and as directed. (a) Leg |
| 42 | (b) Top rail (long/front) |
| 43 | (c) Top rail (short/side) |
| 44 | (d) Stiffener |
| 45 | (e) Top made ofpre-laminated MDF board exterior grade 18mm thick post-formed with 0.6 mm thick laminated in Mohigni/Walnut colour/shade as approved by Engr-in-Charge with 2 mm thick PVC edging of Make : Rehau/Pegasus/Kynes shall be fixed on two sides it complete with strong bonded chemical adhesive through hot pressed machine all as specified in drg and as directed by Engr-in-Charge. |
| 46 | (f) Preparation of surfaces with sand/emery paper and applying french polish two coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed. |
| 47 | Table centreFD-274 & 235 S&F new components of 2nd class HW (shisham) including dismantling unservicable oneall as specified and as directed. (a) Leg |
| 48 | (b) Top rail (long/front) |
| 49 | (c) Top rail (short/side) |
| 50 | (d) Stiffener |
| 51 | (e) Top made ofpre-laminated MDF board exterior grade 18mm thick post-formed with 0.6 mm thick laminated in Mohigni/Walnut colour/shade as approved by Engr-in-Charge with 2 mm thick PVC edging of Make : Rehau/Pegasus/Kynes shall be fixed on two sides it complete with strong bonded chemical adhesive through hot pressed machine all as specified in drg and as directed by Engr-in-Charge. |
| 52 | (f) Preparation of surfaces with sand/emery paper and applying french polish two coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed. |
| 53 | Table PegFD- 277 & 236/384 S&F new components of 2nd class HW (shisham) including dismantling unservicable oneall as specified and as directed. (a) Leg |
| 54 | (b) Top rail (long/front) |
| 55 | (c) Top rail (short/side) |
| 56 | (d) Stiffener |
| 57 | (e) Top made ofpre-laminated MDF board exterior grade 18mm thick post-formed with 0.6 mm thick laminated in Mohigni/Walnut colour/shade as approved by Engr-in-Charge with 2 mm thick PVC edging of Make : Rehau/Pegasus/Kynes shall be fixed on two sides it complete with strong bonded chemical adhesive through hot pressed machine all as specified in drg and as directed by Engr-in-Charge. |
| 58 | (f) Preparation of surfaces with sand/emery paper and applying french polish two coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed. |
| 59 | Table writingFD-249 & 275 (a) Top made ofpre-laminated MDF board exterior grade 18mm thick post-formed with 0.6 mm thick laminated in Mohigni/Walnut colour/shade as approved by Engr-in-Charge with 2 mm thick PVC edging of Make : Rehau/Pegasus/Kynes shall be fixed on two sides it complete with strong bonded chemical adhesive through hot pressed machine all as specified in drg and as directed by Engr-in-Charge. |
| 60 | S&F new components of 2nd class HW (shisham) including dismantling unservicable oneall as specified and as directed. (b) Leg(long) |
| 61 | (c) Leg (short) |
| 62 | (d) Side/bottom rail |
| 63 | (e) Backmade out of 6 mm thick plywood commercial including dismantling unserviceable oneall as specified and as directed. |
| 64 | (f) Sidemade out of 18 mm thick Pre-laminated MDF board one side laminated finish including dismantling unserviceable oneall as specified and as |
| 65 | (g) Stiffner (long) |
| 66 | (h) Drawer made out of 18 mm thick MDF board for front and 12 mm thick for back/side including provision of knob including dismantling unserviceable oneall as specified and as directed. Note :-Knob shall be be aluminium anodised (Dark Brown) chromium plated of approved size and quality |
| 67 | (j) Complete cupboard including drawer from the table writing and made of 18 mm thick pre-laminated MDF board including back provided with 6mm thick commercial plywood including dismantling unserviceable oneall as specified and as directed. Note :- (a)Knob shall be aluminium anodized (dark brown chromium plated of approved size & quality).(b) Hinges shall be 50 mm of approved quality. |
| 68 | (k) Preparation of surfaces with sand/emery paper and applying french polish two coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed. |
| 69 | Hat Stand (FD-361/362) (a) S & F 4mm thick teak face Plyto make front side along with teak wood edging of size 35mm x6 mm including dismantling of old unserviceable one complete all as specified, directed and shown on drawings. |
| 70 | (b) S & F of Back commercial plywood including dismantling unserviceable one complete all as specified, directed and shown on drawings. |
| 71 | (c) S & F of brass Pegs of size 75mm(W) x 120mm (H) including dismantling of old unserviceable one complete all as specified, directed and shown on drawings. |
| 72 | (d) S & F of 5mm looking mirror with edging including dismantling of old unserviceable one complete all as specified, directed and shown on drawings. |
| 73 | (e) M & L for preparation of surfaces with sand / emery paper and applying french polish one or more coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bee"s wax complete along with two key plates all as specified and as directed. |
| 74 | Side boardFD-372 (a) S & F door shutters (both) made of 18mm thick Pre-laminated MDF boardduly providing 6mm thick teak wood beading all round with fittings and fixtures including dismantling unserviceable oneall as specified and as directed. Note :- (i) Knob shall be aluminium anodized (dark brown chromium plated of approved size & quality).(ii) Hinges shall be 50 mm of approved quality. |
| 75 | (b) Front portion of the drawer as to match with the existing made out of 18mm thick Pre-laminatedMDF board andknob including dismantling unserviceable oneall as specified and as directed. |
| 76 | (c) New top made out of 18mm thick Pre-laminated MDF boardduly providing 4mm thick teak wood beading all round including dismantling unserviceable oneall as specified and as directed. |
| 77 | (d)S/F 4mm thick one side teak face plywood on sidesincluding dismantling unserviceable oneall as specified and as directed. |
| 78 | (e) Backmade out of6mm thick commercial ply wood including dismantling unserviceable oneall as specified and as directed. |
| 79 | (f) Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed. |
| 80 | (j) Providing new M & L cushion of 32 density cool foam of size 560 x 530x100mm thick duly upholstered with tapestry cloth as approved (rate not less thanRs 400 /Mtr)complete all as specified and as directed. Make : Feather foam/sleepwell |
| 81 | Preparation of sufaces of following sofa set by throughly rubbing with emery paper, applying raw/burnt seina uniformlyand polishing with french polish one or more coat to obtain a glossy finish complete all as specified and as directed. (a) Sofa set 4 seater |
| 82 | (b) Sofa set 5 seater |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
