Tender For Construction Of Dormitory At Top Sengattupatti At Pachamalai Hills, Thuraiyur Range Trichy Division For The Year: 2023-24
Tender Value
12 Lakhs
Estimated cost
Bid Submission
17 Aug 2023
0 days left
EMD
12000
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruchirappalli → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Dormitory At Top Sengattupatti At Pachamalai Hills, Thuraiyur Range Trichy Division For The Year: 2023-24
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by thedepartmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification |
| 2 | Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 3 | Cement Concrete 1:5:10 (One Cement, Fivesand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundationincluding dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification |
| 4 | Brick work in following Cement Mortar using best quality of Fly Ash Bricks of size 23x11x7 cm for foundation and basement including curing etc., complete complying with standard specification For Ground Floor |
| 5 | Brick partition walls using best quality using country brick os size 83/4 x41/4x23/4 in cement Mortar 1:3 (One cement and Three sand) using hoop iron reinforcement if found necessary incluidng curing etc., complete and as directed by the departmental officers.(Hoop iron reinforcement will be measureed and paid for separately) For Super Structure |
| 6 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oakjoists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) |
| 7 | Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc. |
| 8 | For plane surfaces such asrectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc. |
| 9 | ReinforcedCement Concrete 1:2:4 (One Cement, Two sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officersIn foundation and basement |
| 10 | In Ground Floor |
| 11 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification.(Contractor has to make his own arrangements for the supply of steel and binding wire) |
| 12 | Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundationincluding dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification |
| 13 | Paving the floor with best quality Double chargs vertified tile of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 14 | Flooring withself design Joint free rectified Ceramic Tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand)base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) Self Designed Colour Ceramic Tiles |
| 15 | Dadooing walls with Colour designed Digital Print Ceramic Tiles, with Borders, with size of 300mmx450mmx8mm and above set in cement Mortar 1:2 (one Cement and two sand) 10 mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 kg / sq.m neatly in all floors, curing etc., complete complying with standard specificaion as directed by the department officers) |
| 16 | Supplying and fixing fine polishedcuddapah slab of folowing thickness for cup-board arrangements (38 / 40 mm thick) including laying to correct alighment with necessary cement mortar and black powder etc., complete compying with standard specification and as directed by the department officers) |
| 17 | Plain Cement Concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers. |
| 18 | Supplying and fixing UPVC (Un-Plasticied Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mmx58mm and shutter profile are reinforcement with GI/1mm125 GSM and 100% corrosion fre, the profiles are multi chamberedsections with wall thick of 2 mm. The EDPM rubber (black colour covered with over all the edges offrame and shutter the shutter will be provided with espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiationsl free pin headed plain or browncolour glass4 mm thick should be proved to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockableaction, security protecting hinges, strong locking sysems an as per size for arresting noise and energy loss. The connecting machanism between sash andouter frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and slicon packing all round the frames |
| 19 | Supplying and fixing UPVC (Un-Plasticied Polyvinyl Chloride)Louvered Ventilators of from theprofile the size of outer frame 60mmx58mm and shutter profile are reinforcement with GI/1mm125 GSM and 100% corrosion fre, the profiles are multi chamberedsections with wall thick of 2 mm. The EDPM rubber (black colour covered with over all the edges offrame and shutter the shutter will be provided with espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiationsl free pin headed plain or browncolour glass4 mm thick should be proved to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockableaction, security protecting hinges, strong locking sysems an as per size for arresting noise and energy loss. The connecting machanism between sash andouter frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and slicon packing all round the frames.The Ventilatorsshould be got approved from the Executive from use on work. |
| 20 | Supplying and fixing in position of Solid PVC Door Shutters using 19 guage MS sq.tubes for styles and outer frames. 15 mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5 mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The overlal size of styles shal be 50x30 mm. The overall size of top rail. lock rail and bottom rail shall be75x30 mm . The overallsize of frame shall be 50x45 mm with suitable rabate for housing theshutter etc., |
| 21 | Providing and fixing PVC Rainwater downlall pipes of folloiwng ida 94kg / CM2) diametre with necessary shoes,bends,and other specials, clamps, screws, nails, teakwood plugs etc., completed including cost of all materials. The rate is to include cost of removable cast ron Grtings of approvpiate size,. |
| 22 | Supplying and fabrication for MS Grill including cost of materials and labour charges for cutting, weldging charges including cost of welding rod conveyance charges at site of work including cost of one coat of red oxide primer, etc., complete complying with standard specifications. |
| 23 | Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers |
| 24 | Plastering with Cement Mortar 1:5 (One Cement and Five Sand) 12mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers. |
| 25 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 26 | Painting two coats of newly plastered wall surface with ready mixed exterior plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 27 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 28 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \"B\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 29 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \"B\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
AI Tender Summary
Tender Timeline
Aug 08, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 18, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender