Tender For Construction Of Minor Bridge On Lamjana Nilanga Bhalki Road, Sh-244 Km 11/00 Tq.Nilanga Dist Latur.
Tender Value
1.14 Crore
Estimated cost
Bid Submission
01 Sep 2023
0 days left
EMD
1.14 Lakhs
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nilanga → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Minor Bridge On Lamjana Nilanga Bhalki Road, Sh-244 Km 11/00 Tq.Nilanga Dist Latur.
BOQ
| Sl. No. | Item Description |
| 1 | PART – A (Work Portion) |
| 2 | ITEM No. 1 :- Dismantling stone masonry in lime or cement mortar including stacking the materials as directed with all leads, lifts etcetera |
| 3 | ITEM No. 2 :- Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting as necessary and disposing off excavated stuff as directed etcetera complete. |
| 4 | ITEM No. 3 :- Excavation for foundation in hard murum and boulders including shoring and strutting as necessary and disposing off excavated stuff as directed etcetera complete. |
| 5 | ITEM No. 4 :- Excavation for foundation in hard rock by blasting including shoring and strutting as necessary and disposing off excavated stuff as directed etcetera complete. |
| 6 | ITEM No. 5 :- Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthen bunds etcetera as may be necessary for foundation and other parts of the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etcetera complete. (Prior approval of Superintending Engineer will be necessary) |
| 7 | ITEM No. 6 :- Providing soling using 80 millimetre size trap metal in 15 centimetre layer including filling voids with Crushed sand /grit, ramming, watering etcetera complete. |
| 8 | ITEM No. 7 :- Providing and laying in situ / ready mix controlled grade of M-20 of trap /granite /quartzite /gneiss metal for Reinforced Cement Concrete works in cut off walls / curtain walls including necessary scaffolding, centering, compacting by vibrator, finishing and curing etcetera complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with fine aggregates of required specifications (VSI sand finely washed etcetera), excluding reinforcement) (Material including all lead and lifts) |
| 9 | ITEM No. 8 :- Providing and filling annular space around footing in rock by using concrete of M-15 grade etcetera complete. (Material including all lead and lifts) |
| 10 | ITEM No. 9 :- Providing steel anchor dowel bars of 32 millimetre diameter and 4 metre length at the base of the well including drilling holes of 60 millimetre diameter up to 2.5 metre depth in rock, placing the dowels in position and effectively grouting the holes with cement mortar 1:1 etcetera complete. |
| 11 | ITEM No. 10 :- Providing and laying in situ / ready mix M-20 plain cement concrete of trap /granite/quartzite/ gneiss metal for cast in situ piers, abutment, returns, wings etcetera including provision of \"V\" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood / steel form work centering ( excluding dewatering by means of pump) and including bailling out water and curing finishing in cement mortar 1:3 etcetera complete as directed by Engineer in charge (a) Height upto 5 Metre (With Concrete Mixer) With fine aggregates of required specifications (VSI sand finely washed etcetera) For Abutment, Returns, Piers (Material including all lead and lifts) |
| 12 | ITEM No. 11 :- Providing and laying in situ / ready mix controlled M-30 cement concrete of trap / granite / quartzite/ gniess metal for reinforced cement concrete caps over piers and abutments including necessary scaffolding plywood/steel formwork, compacting by vibrating, finishing in CM 1:3 and curing etc complete (Excluding reinforcement) With reversible drum type mixer/ concrete batch mix plant (pan mixer). (VSI sand finely washed etcetera) (Material including all lead and lifts) |
| 13 | ITEM No. 12 :- Providing, cutting, bending, hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all reinforced cement concrete works as per detailed drawings etcetera complete. (Material including all lead and lifts) |
| 14 | ITEM No. 13 :- Back filling behind abutment, wing wall and return wall as per drawings and technical specifications etcetera complete. (by granular material) |
| 15 | ITEM No. 14 :- Providing and laying 0.90 meter thick metal mat consisting of rubble, oversize metal and normal size metal in specified thickness as per detailed drawing including supplying all materials, hand packing of rubble, spreading metal in layers and hard murum including watering and compaction with power roller etcetera complete. (Material including all lead and lifts) |
| 16 | ITEM No. 15 :- Providing selected hard murum filling including laying in layers of 15 to 20 centimetre with watering and compacting etc. complete. (Material including all lead and lifts) |
| 17 | ITEM No. 16 :- Providing and laying weep holes of 100 millimetre diameter AC/PVC pipes as per drawing for abutment returns, return walls etcetera Complete. (Material including all lead and lifts) |
| 18 | ITEM No. 17 :- Providing and laying in situ / ready mix M-30 controlled cement concrete of trap/ granite/ quartzite / gneiss metal for RCC work in solid / deck slab etcetera including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etcetera complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer and VSI sand finely washed etcetera) i) Height up to 5 metre, normal rate. (Material including all lead and lifts) |
| 19 | ITEM No. 18 :- Providing and laying in situ / ready mix M-30 RCC of trap/ granite/ quartzite/ gneiss metal for RCC work of Ballast Wall and Kerb including scaffolding, compaction, formwork finishing and curing etcetera complete. (excluding reinforcement, with concrete batch mix plant / pan mixer with VSI sand finely washed etcetera) (Material including all lead and lifts) |
| 20 | ITEM No. 19 :- Providing and laying cement concrete wearing coat M-30 grade with batch mix type concrete mixer with SCADA including reinforcement as per drawings and technical specifications etcetera complete. (Material including all lead and lifts) |
| 21 | ITEM No. 20 :- Providing tar paper bearing including laying in proper position etcetera complete. (Material including all lead and lifts) |
| 22 | ITEM No. 21 :- Providing expansion joints with 25 millimetre thick bituminous pad as per detailed drawings etcetera complete. (Material including all lead and lifts) |
| 23 | ITEM No. 22 :- Providing railing of mild steel angle post 2.0 metre center to center of section 75 millimetre X 75 millimetre X 10 millimetre or equivalent I/C section of height 1.05 metre above bridge surface with minimum anchor length of 30 centimetre including hold fast of 25 millimetre diameter mild steel bar welded at the bottom and concreting of 1:3:6 of size 30 centimetre x 30 centimetre x 30 centimetre with three rows of 40 millimetre B class Galvanised Iron pipe provided at 30 centimetre on center to center including scaffolding and one coat of anticorrosive paint with two coats of oil painting, curing of concrete etcetera complete. (Material including all lead and lifts) |
| 24 | ITEM No. 23 :- Providing and fixing stream lined M-15 grade Reinforced Cement Concrete guard stone including mild steel bar reinforcement etcetera complete (Material including all lead and lifts) |
| 25 | ITEM No. 24 :- Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 millimetre, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of over 1000 metres including removal and disposal of top organic soil not exceeding 150 millimetre in thickness. |
| 26 | ITEM No. 25 :- Excavation for catch / side water gutter in hard murum starta to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils, by Mechanical Means. |
| 27 | ITEM No. 26 :- Providing earth work in embankment with approved materials obtained from departmental land with all lifts and leads, including all lifts, laying in layers of 20 centimetre to 30 centimetre thickness breaking clods, dressing to the required lines, curves, grades and section, watering and compaction with Vibratory roller to achieve not less than 97 % of standard proctor density etcetera complete. (Material including all lead and lifts) |
| 28 | ITEM No. 27 :- Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader / Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per Clause 401 – Plant Mix Method and Grading – II Material. (Material including all lead and lifts) |
| 29 | ITEM No. 28 :- Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening / binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller to the required density Grading - II (Using Screening Type B (11.2 millimetre) Aggregate) (Material including all lead and lifts) |
| 30 | ITEM No. 29 :- Providing and constructing 75 millimetre thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 millimetre stone metal layers 30 % crusher broken metal + 70 % Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of VG-30 grade at the rate of2 Kilogram per Square Metre, spreading 12 millimetre size chips compacting with three wheel static roller having weight 8 to 10 MT. to achieve the desired degree of compaction as per Technical Specification Clause 506 etcetera complete including picking of existing Water Bound Macadam surface. (Material including all lead and lifts) |
| 31 | ITEM No. 30 :- Open Graded Premix Surfacing- Providing and Laying OGC 20 millimetre thickness composed of 13.2 millimetre to 5.6 millimetre aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of VG-30 grade - USING drum mix type hot mix plant, Paver and Vibratory roller (Over BT Surface). (Material including all lead and lifts) |
| 32 | ITEM No. 31 :- Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of VG-30 grade preparing existing road surface, heating and applying bitumen at the rate of 0.98 Kilogram per square metre by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 Metric Tonne etcetera complete. (Material including all lead and lifts) |
| 33 | ITEM No. 32 :- Providing and fixing of retro- reflectorised informatory sign board rectangular / Square in shape having area greater than 0.9 square meter made out of 2 millimetre aluminum sheet bonded with white retro reflective sheeting of Class B (Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive / heat activated adhesive reto-reflective specified back ground, border and back side reto-reflective symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25 millimetre X 25 millimetre X 3 millimetre, duly painted on back side with two coats of grey stove enamel paint and supported on two Number mild steel angle iron post 75 millimetre X 75 millimetre X 6 millimetre, 3.5 metre long firmly fixed to the ground by means of properly designed foundation with M-25 grade cement concrete 45 centimetre X 45 centimetre X 60 centimetre, 60 centimetre below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 centimetre width including Galvanised Iron fixtures and transportation etcetera complete. The nut bolts of board with angle iron post / supporting structure after fixing at site has to be electrically welded. Class B (Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty. |
| 34 | ITEM No. 33 :- Providing dry rubble stone pitching 23 centimetre (about 9) thick including all material, quarry spalls, labour etcetera complete. |
| 35 | ITEM No. 34 :- Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 1000 millimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etcetera complete. (Material including all lead and lifts) |
| 36 | TOTAL PART – A (Work Portion) : Rs.1,12,88,385/- |
AI Tender Summary
Tender Timeline
Aug 07, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 04, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender