|
| 1 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : (a) 1:3:6 (1 cement : 3 coarse sand derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 2 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : (a) Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 3 | 12 mm cement plaster of mix : (a) 1:6 (1 cement: 6 fine sand) |
| 4 | 15 mm cement plaster on the rough side of single or half brick wall of mix : (a) 1:6 (1 cement: 6 fine sand) |
| 5 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. (a) Two or more coats on new work. |
| 6 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 7 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 8 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : (a) 125 mm |
| 9 | (b) 100 mm |
| 10 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade with necessary screws etc. complete. (a) Twin rubber stopper |
| 11 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : (a) 250x10 mm |
| 12 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :(a) 300x16 mm |
| 13 | (b) 250x16 mm |
| 14 | Providing and fixing bright finishedM S casement window fastener with necessary screws etc. complete.(a) 150 mm |
| 15 | Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete. (a) 300 mm weighing not less than 200 gms. |
| 16 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes. (a) 110 mm diameter |
| 17 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. (a) Single tee with door(i) 110x110x110 mm |
| 18 | (b) Bend 87.5° (i) 110 mm bend |
| 19 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. (a) 110 mm |
| 20 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : (a) With cement mortar 1:4 (1cement: 4 coarse sand). |
| 21 | Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacturer and of required shade and colour complete. as per manufacturer\"s specification. (a) One or more coats on old work. |
| 22 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : (a) One or more coats on old work |
| 23 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: (a) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 24 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \"S\" or \"P\" trap including dismantling of old WC seat and \"S\" or \"P\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. (a) Orissa pattern W.C Pan of size 580x440 mm |
| 25 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. (a) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 26 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. (a) In cement mortar |
| 27 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead (a) Of area 3 sq. metres and below |
| 28 | (b) Of area beyond 3 sq. metres |
| 29 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall (a) 15 mm nominal outer dia. Pipes. |
| 30 | (b) 20 mm nominal outer dia. Pipes. |
| 31 | © 25 mm nominal outer dia .Pipes. |
| 32 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. (a) 15 mm dia. nominal bore |
| 33 | (b) 20 mm dia. nominal bore |
| 34 | © 25 mm dia. nominal bore |
| 35 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete(a) 25 to 40 mm nominal bore |
| 36 | Providing and fixing uplasticised PVC connection pipe with brass unions : (a) 30 cm length 15 mm nominal bore |
| 37 | Providing and fixing PTMT pillar cock of approved quality and colour . (a) 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 38 | Providing and fixing PTMT bib cock of approved quality and colour. (a) 15mm nominal bore, 90 mm long. Weighing not less than 93 gms. |
| 39 | Providing and fixing PTMT grating of approved quality and colour. (a) Circular type. 100 mm nominal dia. |
| 40 | Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. |
| 41 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. |
| 42 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : (a) Orissa pattern W.C. pan of size 580x440 mm |
| 43 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : (a) Rectangular shape 453x357 mm |
| 44 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 45 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. (a) 10 litre capacity - White |
| 46 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : (a) For fixed portion (i) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 47 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. (a) With stainless steel cover plate minimum 1.25 mm thickness. |
| 48 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. (a) Pre-laminated particle board with decorative lamination on both sides. |
| 49 | Shifting of existing aluminium partition i/c stacking the aluminium and glass in serviceable condition (from Telephone Bhawan 2nd floorto Telephone Bhawan 1st floor i/ctranportation charge , labour cost ) as per direction of Engineer in charge. |
| 50 | Fixing aluminium work for doors, windows, ventilators and partitions with availabledismantledextruded built up standard tubular sections/appropriate Z sections and other sections , fixing with newdash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sidesand fixing dismantled glass/board in required size by cutting with required newEPDM rubber/neoprene gasket etc.includingnew cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws wherever required, all complete as perdirections of Engineer-in-charge. (Cost of aluminium snap beading, newEPDM rubber/neoprene gasket etc.includingnew cleat angle, Aluminium snap beading for glazing /shall be paid in basic item): |
| 51 | Providing and fixing rubber beading using the for fixing the glass in partition as per direction of Engineer in charge. |
| 52 | Cleaning of dust and spots on the glass and aluminium partition with chemicals like colin etc. as per direction of Engineer in charge. |
| 53 | Easy adjusting of doors / windows shutter(Aluminium,wood or steel window) wherever necessary of fixing with screws,oiling,chesiling etc.comlete as direction of Engineer in charge. |
| 54 | Shifting of existing 2 number chest from Telephone Bhawan at2nd floorto Telephone Bhawan 1st floor for this operation using chain, pulling ,jack, and associated equipment if are requided and fixed the same in 1st floor as per direction of EIC. ( all labour costand equipment cost areincluding) and dismentling and refixing cost paid seperetely. |
| 55 | Shifting the existing M.S grill and gate for chest and cashier section takingout from wall at 2nd floor and refixid at 1st floor if required alteration ,cutting ,welding etc i/c all labour cost , welder cost and associated cost etc. as per dierection of EIC. |
| 56 | Shifting of office furniture ,docouments, computer i/c asscesories ,printer, table chair etc of account sction ,TRA section and other office of 2nd floor to 1st floor at telephone bhawan i/c all labour cost and associated cost as per direction of eic. |
| 57 | shifiting of almirha, wooden (approx 10) and steel(approx 15) rake (approx 20),documents , table ,chair etc from 2nd floor to terrace floor (4th floor) /( 1st floor) of telephone i/c all labour cost,rope, jute/sugar bag for paking of documents as per direction of EIC. (All section of 2nd floor) |
| 58 | Easy adjustingof all size steel window by sand paper & including oilingby keresonie oil,replace the hinge,cutting the wall etc. same making the windows easy opertable by applying grease/mobile,etc all complete as per EIC. |
| 59 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with bamboos 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with bamboos, bamboo challies,clamps andstaircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners,connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. |
