|
| 1 | Supply, install, testing and commissioning of \"SOLAR HOT WATER SYSTEM\" (Evacuated Tube Collector) based on direct transferring of heat of capacity 200 LPD of backup stainless steel hot water tank of make - Supreme Solar/ONYX Electronics Solar/Sun Zone Solar complete all as per manufacturers instructionscomplete all as directed by Campus Superintendant. |
| 2 | Supply, install, testing and commissioning of \"SOLAR HOT WATER SYSTEM\" (Evacuated Tube Collector) based on direct transferring of heat of capacity 500 LPD of backup stainless steel hot water tank of make - Supreme Solar/ONYX Electronics Solar/Sun Zone Solar complete all as per manufacturers instructionscomplete all as directed by Campus Superintendant. |
| 3 | Excavation in trenches in soil n.exc 1.5 m wideand n.exc 1.50m in depth for foundation, pier holes etc n exc 10 sqm on plan and getting out complete. |
| 4 | M & L for broken stone or boulders hardcore of guage n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick , watered and rolled/rammed to a true surface |
| 5 | Material and labour cement concrete 1:4:8 type D-2 using 40mm graded agg as in foundations filling and in mass concrete complete all as specified and as directed. |
| 6 | S&F Structural steel work in compound girders or stanchions built up from one or more RS Joists or chnnel section or plates angles etc welded for staging of water tank etc including cutting and fixing all lattice bars, stiffeners, gusset plates, bolts, nuts, welding rod etc completed with flange plates heads sole plates, angle connection etc with hoisting and erecting in position with two or more channels or plates or angle iron etc completed all as directed. Make TATA/JINDAL |
| 7 | Material and Labour for RCC nominal mix Type B1 1:2:4 using 20 mm graded aggregate for columns, pillars, piers, posts and struts etc |
| 8 | Supply and fix500 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 2 Nos tank nipple fittigs in each tank complete all as specified. |
| 9 | Supply and fix 1000 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 2 Nos tank nipple fittigs in each tank complete all as specified. |
| 10 | Supply and fix unplasticised PVC pipe of pressure rating 10 kgf/cm2 fixed to wall, ceiling, floor, trenches etc including all necessary fittings like elbow, tee, union, socket, reducer etcof 25 mm dia bore. |
| 11 | Supply and fix unplasticised PVC pipe of pressure rating 10 kgf/cm2 fixed to wall, ceiling, floor, trenches etc including all necessary fittings like elbow, tee, union, socket, reducer etcof 20 mm dia bore. |
| 12 | Supply and fix unplasticised PVC pipe of pressure rating 10 kgf/cm2 fixed to wall, ceiling, floor, trenches etc including all necessary fittings like elbow, tee, union, socket, reducer etcof 15 mm dia bore. |
| 13 | Supply and fix 20 mm bore of CPVC Hot water pipe duly insulated with glass wool and aluminium cladding including fittings like elbow, tee, union, socket, reducer etccomplete all as specified and as directed by Campus Supdt. |
| 14 | S&FCP 15 mm bib tap fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. Make - Hindware/Somany/Asian |
| 15 | S&FPVC25 mm stop valve fancy type, with crutch or butterfly handle, screwed down, screwed for iron/pvc pipe or for brass ferrule. Make - Hindware/Somany/Asian |
| 16 | S&FPVC20 mm stop valve fancy type, with crutch or butterfly handle, screwed down, screwed for iron/pvc pipe or for brass ferrule. Make - Hindware/Somany/Asian |
| 17 | S&FPVC15 mm stop valve fancy type, with crutch or butterfly handle, screwed down, screwed for iron/pvc pipe or for brass ferrule. Make - Hindware/Somany/Asian |
| 18 | M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 CM girth all as specified and directred |
| 19 | M&L for glazed coloured tiles of size 300x200x7 mm thick in vertical surfaces such as skirting/dados/wall, including 10 mm thick plaster / backing coat in cement mortar 1:4 for fixing of tiles, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces. Make :Somany/Johnson/Orient |
| 20 | S&F 25 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and as directed by Campus Supdt. |
| 21 | S&F 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and as directed by Campus Supdt. |
| 22 | Material and labour Removing excavated material, debris etc(Soft/disintegrated rock/ brocken bricks and stone) not exceeding 50 metre & depositing whereas directed at a level not exceeding 1.5M above the starting point. |
| 23 | Returning filling in including spreading levelling watering and well ramming in layers not exc 25 cm in any type of soil complete all as specified and directed . |
| 24 | M & L rendering 15 mm thick on concrete surface in cement mortar 1:6 on internal and external wall surfaces. |
| 25 | Material and labour for two coats of Apex weather proof ultima asian paint over a one coat of smart care damp proof primer (1st quality ) Asian paint after removal ofprevious coat from brick/stone/concrete .All as specified and directed by Campus Supdt Note : Rate should be including of one coat of primer, two coat of Apexand Scaffolding. |
| 26 | M&L for two coats of synthetic enamel painting to new steel surfaces over one coat of red oxide primer including preparation all as specified. |
